ARM: sunxi: Drop mmc0_cd_pin_reference_design pinmux setting

As part of our effort to move pinctrl/GPIO interlocking into the
driver where it belongs, this patch drops the definition and usage
of the mmc0_cd_pin_reference_design pinmux setting for the default
mmc0 card detect GPIO pin.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

arch/arm/boot/dts/sun4i-a10-a1000.dts

@@ -171,7 +171,7 @@ phy1: ethernet-phy@1 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts

@@ -109,7 +109,7 @@ phy1: ethernet-phy@1 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts

@@ -128,7 +128,7 @@ button@1200 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-cubieboard.dts

@@ -142,7 +142,7 @@ phy1: ethernet-phy@1 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts

@@ -163,7 +163,7 @@ button@800 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-gemei-g9.dts

@@ -146,7 +146,7 @@ button@1142 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */

arch/arm/boot/dts/sun4i-a10-hackberry.dts

@@ -107,7 +107,7 @@ phy0: ethernet-phy@0 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts

@@ -79,7 +79,7 @@ axp209: pmic@34 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-inet1.dts

@@ -161,7 +161,7 @@ button@1200 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-inet97fv2.dts

@@ -147,7 +147,7 @@ button@1200 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts

@@ -305,7 +305,7 @@ button@1200 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts

@@ -100,7 +100,7 @@ phy1: ethernet-phy@1 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts

@@ -140,7 +140,7 @@ phy1: ethernet-phy@1 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-marsboard.dts

@@ -141,7 +141,7 @@ phy1: ethernet-phy@1 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-mini-xplus.dts

@@ -97,7 +97,7 @@ &ir0_rx_pins_a {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-mk802.dts

@@ -72,7 +72,7 @@ &ehci1 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-mk802ii.dts

@@ -83,7 +83,7 @@ axp209: pmic@34 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts

@@ -145,7 +145,7 @@ phy1: ethernet-phy@1 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-pcduino.dts

@@ -147,7 +147,7 @@ phy1: ethernet-phy@1 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts

@@ -149,7 +149,7 @@ button@800 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -1030,12 +1030,6 @@ mmc0_pins_a: mmc0@0 {
 				bias-pull-up;
 			};
 
-			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
-				pins = "PH1";
-				function = "gpio_in";
-				bias-pull-up;
-			};
-
 			ps20_pins_a: ps20@0 {
 				pins = "PI20", "PI21";
 				function = "ps2";

arch/arm/boot/dts/sun7i-a20-cubieboard2.dts

@@ -137,7 +137,7 @@ &ir0 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun7i-a20-cubietruck.dts

@@ -178,7 +178,7 @@ &ir0 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun7i-a20-hummingbird.dts

@@ -160,7 +160,7 @@ &ir0 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts

@@ -157,7 +157,7 @@ &ir0 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun7i-a20-icnova-swac.dts

@@ -104,7 +104,7 @@ &i2c1 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; /* PI5 */

arch/arm/boot/dts/sun7i-a20-itead-ibox.dts

@@ -121,7 +121,7 @@ &ir0 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun7i-a20-m3.dts

@@ -117,7 +117,7 @@ &ir0 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun7i-a20-mk808c.dts

@@ -109,7 +109,7 @@ &i2c2 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts

@@ -187,7 +187,7 @@ button@1400 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts

@@ -130,7 +130,7 @@ eeprom: eeprom@50 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts

@@ -131,7 +131,7 @@ eeprom: eeprom@50 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts

@@ -198,7 +198,7 @@ button@1398 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts

@@ -130,7 +130,7 @@ &ir0 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun7i-a20-pcduino3.dts

@@ -156,7 +156,7 @@ &ir0 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts

@@ -151,7 +151,7 @@ button@761 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts

@@ -120,7 +120,7 @@ &i2c2 {
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -1190,12 +1190,6 @@ mmc0_pins_a: mmc0@0 {
 				bias-pull-up;
 			};
 
-			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
-				pins = "PH1";
-				function = "gpio_in";
-				bias-pull-up;
-			};
-
 			mmc2_pins_a: mmc2@0 {
 				pins = "PC6", "PC7", "PC8",
 				       "PC9", "PC10", "PC11";