Commit cf458287 authored by Arend van Spriel's avatar Arend van Spriel Committed by John W. Linville

brcmfmac: replace dongle command list with .preinit() callback

The bus-specific interface allowed a list of dongle commands to be
provided to the common driver part. However, upcoming functionality
requires a more dynamic behaviour. Hence the list is replaced
by a new callback function so the bus-specific driver part can
implement this behaviour.
Reviewed-by: default avatarFranky Lin <frankyl@broadcom.com>
Reviewed-by: default avatarHante Meuleman <meuleman@broadcom.com>
Reviewed-by: default avatarPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: default avatarArend van Spriel <arend@broadcom.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 8dee77ba
......@@ -34,6 +34,7 @@ struct brcmf_bus_dcmd {
/**
* struct brcmf_bus_ops - bus callback operations.
*
* @preinit: execute bus/device specific dongle init commands (optional).
* @init: prepare for communication with dongle.
* @stop: clear pending frames, disable data flow.
* @txdata: send a data frame to the dongle. When the data
......@@ -51,6 +52,7 @@ struct brcmf_bus_dcmd {
* indicated otherwise these callbacks are mandatory.
*/
struct brcmf_bus_ops {
int (*preinit)(struct device *dev);
int (*init)(struct device *dev);
void (*stop)(struct device *dev);
int (*txdata)(struct device *dev, struct sk_buff *skb);
......@@ -85,7 +87,6 @@ struct brcmf_bus {
unsigned long tx_realloc;
u32 chip;
u32 chiprev;
struct list_head dcmd_list;
struct brcmf_bus_ops *ops;
};
......@@ -93,6 +94,13 @@ struct brcmf_bus {
/*
* callback wrappers
*/
static inline int brcmf_bus_preinit(struct brcmf_bus *bus)
{
if (!bus->ops->preinit)
return 0;
return bus->ops->preinit(bus->dev);
}
static inline int brcmf_bus_init(struct brcmf_bus *bus)
{
return bus->ops->init(bus->dev);
......@@ -151,6 +159,8 @@ void brcmf_txflowblock(struct device *dev, bool state);
void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success);
int brcmf_bus_start(struct device *dev);
s32 brcmf_iovar_data_set(struct device *dev, char *name, void *data,
u32 len);
void brcmf_bus_add_txhdrlen(struct device *dev, uint len);
#ifdef CONFIG_BRCMFMAC_SDIO
......
......@@ -257,8 +257,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
u8 buf[BRCMF_DCMD_SMLEN];
char *ptr;
s32 err;
struct brcmf_bus_dcmd *cmdlst;
struct list_head *cur, *q;
/* retreive mac address */
err = brcmf_fil_iovar_data_get(ifp, "cur_etheraddr", ifp->mac_addr,
......@@ -342,17 +340,8 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
brcmf_c_pktfilter_offload_enable(ifp, BRCMF_DEFAULT_PACKET_FILTER,
0, true);
/* set bus specific command if there is any */
list_for_each_safe(cur, q, &ifp->drvr->bus_if->dcmd_list) {
cmdlst = list_entry(cur, struct brcmf_bus_dcmd, list);
if (cmdlst->name && cmdlst->param && cmdlst->param_len) {
brcmf_fil_iovar_data_set(ifp, cmdlst->name,
cmdlst->param,
cmdlst->param_len);
}
list_del(cur);
kfree(cmdlst);
}
/* do bus specific preinit here */
err = brcmf_bus_preinit(ifp->drvr->bus_if);
done:
return err;
}
......
......@@ -1048,8 +1048,6 @@ int brcmf_attach(struct device *dev)
/* attach firmware event handler */
brcmf_fweh_attach(drvr);
INIT_LIST_HEAD(&drvr->bus_if->dcmd_list);
return ret;
fail:
......@@ -1206,6 +1204,14 @@ void brcmf_detach(struct device *dev)
kfree(drvr);
}
s32 brcmf_iovar_data_set(struct device *dev, char *name, void *data, u32 len)
{
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
struct brcmf_if *ifp = bus_if->drvr->iflist[0];
return brcmf_fil_iovar_data_set(ifp, name, data, len);
}
static int brcmf_get_pend_8021x_cnt(struct brcmf_if *ifp)
{
return atomic_read(&ifp->pend_8021x_cnt);
......
......@@ -3425,6 +3425,35 @@ brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus)
return ret;
}
static int brcmf_sdbrcm_bus_preinit(struct device *dev)
{
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
struct brcmf_sdio *bus = sdiodev->bus;
u32 value;
u8 idx;
int err;
/* sdio bus core specific dcmd */
idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
if (bus->ci->c_inf[idx].rev < 12) {
/* for sdio core rev < 12, disable txgloming */
value = 0;
err = brcmf_iovar_data_set(dev, "bus:txglom", &value,
sizeof(u32));
} else {
/* otherwise, set txglomalign */
value = 4;
if (sdiodev->pdata)
value = sdiodev->pdata->sd_sgentry_align;
/* SDIO ADMA requires at least 32 bit alignment */
value = max_t(u32, value, 4);
err = brcmf_iovar_data_set(dev, "bus:txglomalign", &value,
sizeof(u32));
}
return err;
}
static int brcmf_sdbrcm_bus_init(struct device *dev)
{
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
......@@ -3905,6 +3934,7 @@ static void brcmf_sdbrcm_release(struct brcmf_sdio *bus)
static struct brcmf_bus_ops brcmf_sdio_bus_ops = {
.stop = brcmf_sdbrcm_bus_stop,
.preinit = brcmf_sdbrcm_bus_preinit,
.init = brcmf_sdbrcm_bus_init,
.txdata = brcmf_sdbrcm_bus_txdata,
.txctl = brcmf_sdbrcm_bus_txctl,
......@@ -3916,10 +3946,6 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
{
int ret;
struct brcmf_sdio *bus;
struct brcmf_bus_dcmd *dlst;
u32 dngl_txglom;
u32 txglomalign = 0;
u8 idx;
brcmf_dbg(TRACE, "Enter\n");
......@@ -4003,30 +4029,6 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
brcmf_sdio_debugfs_create(bus);
brcmf_dbg(INFO, "completed!!\n");
/* sdio bus core specific dcmd */
idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
dlst = kzalloc(sizeof(struct brcmf_bus_dcmd), GFP_KERNEL);
if (dlst) {
if (bus->ci->c_inf[idx].rev < 12) {
/* for sdio core rev < 12, disable txgloming */
dngl_txglom = 0;
dlst->name = "bus:txglom";
dlst->param = (char *)&dngl_txglom;
dlst->param_len = sizeof(u32);
} else {
/* otherwise, set txglomalign */
if (sdiodev->pdata)
txglomalign = sdiodev->pdata->sd_sgentry_align;
/* SDIO ADMA requires at least 32 bit alignment */
if (txglomalign < 4)
txglomalign = 4;
dlst->name = "bus:txglomalign";
dlst->param = (char *)&txglomalign;
dlst->param_len = sizeof(u32);
}
list_add(&dlst->list, &bus->sdiodev->bus_if->dcmd_list);
}
brcmf_bus_add_txhdrlen(bus->sdiodev->dev, bus->tx_hdrlen);
/* if firmware path present try to download and bring up bus */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment