pinctrl: intel: Make offset to interrupt status register configurable

Some GPIO blocks have the interrupt status (GPI_IS) offset different
than it normally is, so make it configurable. If no offset is specified
we use the default.

While there remove two unused constants from the core driver.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/intel/pinctrl-intel.c

@@ -30,8 +30,6 @@
 
 #define PADBAR				0x00c
 #define GPI_IS				0x100
-#define GPI_GPE_STS			0x140
-#define GPI_GPE_EN			0x160
 
 #define PADOWN_BITS			4
 #define PADOWN_SHIFT(p)			((p) % 8 * PADOWN_BITS)
@@ -818,7 +816,7 @@ static void intel_gpio_irq_ack(struct irq_data *d)
 	community = intel_get_community(pctrl, pin);
 	if (community) {
 		const struct intel_padgroup *padgrp;
-		unsigned gpp, gpp_offset;
+		unsigned gpp, gpp_offset, is_offset;
 
 		padgrp = intel_community_get_padgroup(community, pin);
 		if (!padgrp)
@@ -826,9 +824,10 @@ static void intel_gpio_irq_ack(struct irq_data *d)
 
 		gpp = padgrp->reg_num;
 		gpp_offset = padgroup_offset(padgrp, pin);
+		is_offset = community->is_offset + gpp * 4;
 
 		raw_spin_lock(&pctrl->lock);
-		writel(BIT(gpp_offset), community->regs + GPI_IS + gpp * 4);
+		writel(BIT(gpp_offset), community->regs + is_offset);
 		raw_spin_unlock(&pctrl->lock);
 	}
 }
@@ -843,7 +842,7 @@ static void intel_gpio_irq_enable(struct irq_data *d)
 	community = intel_get_community(pctrl, pin);
 	if (community) {
 		const struct intel_padgroup *padgrp;
-		unsigned gpp, gpp_offset;
+		unsigned gpp, gpp_offset, is_offset;
 		unsigned long flags;
 		u32 value;
 
@@ -853,10 +852,11 @@ static void intel_gpio_irq_enable(struct irq_data *d)
 
 		gpp = padgrp->reg_num;
 		gpp_offset = padgroup_offset(padgrp, pin);
+		is_offset = community->is_offset + gpp * 4;
 
 		raw_spin_lock_irqsave(&pctrl->lock, flags);
 		/* Clear interrupt status first to avoid unexpected interrupt */
-		writel(BIT(gpp_offset), community->regs + GPI_IS + gpp * 4);
+		writel(BIT(gpp_offset), community->regs + is_offset);
 
 		value = readl(community->regs + community->ie_offset + gpp * 4);
 		value |= BIT(gpp_offset);
@@ -991,7 +991,8 @@ static irqreturn_t intel_gpio_community_irq_handler(struct intel_pinctrl *pctrl,
 		const struct intel_padgroup *padgrp = &community->gpps[gpp];
 		unsigned long pending, enabled, gpp_offset;
 
-		pending = readl(community->regs + GPI_IS + padgrp->reg_num * 4);
+		pending = readl(community->regs + community->is_offset +
+				padgrp->reg_num * 4);
 		enabled = readl(community->regs + community->ie_offset +
 				padgrp->reg_num * 4);
 
@@ -1241,6 +1242,9 @@ int intel_pinctrl_probe(struct platform_device *pdev,
 		community->regs = regs;
 		community->pad_regs = regs + padbar;
 
+		if (!community->is_offset)
+			community->is_offset = GPI_IS;
+
 		ret = intel_pinctrl_add_padgroups(pctrl, community);
 		if (ret)
 			return ret;
@@ -1356,7 +1360,7 @@ static void intel_gpio_irq_init(struct intel_pinctrl *pctrl)
 		for (gpp = 0; gpp < community->ngpps; gpp++) {
 			/* Mask and clear all interrupts */
 			writel(0, base + community->ie_offset + gpp * 4);
-			writel(0xffff, base + GPI_IS + gpp * 4);
+			writel(0xffff, base + community->is_offset + gpp * 4);
 		}
 	}
 }

drivers/pinctrl/intel/pinctrl-intel.h

@@ -73,6 +73,8 @@ struct intel_padgroup {
  * @hostown_offset: Register offset of HOSTSW_OWN from @regs. If %0 then it
  *                  is assumed that the host owns the pin (rather than
  *                  ACPI).
+ * @is_offset: Register offset of GPI_IS from @regs. If %0 then uses the
+ *             default (%0x100).
  * @ie_offset: Register offset of GPI_IE from @regs.
  * @pin_base: Starting pin of pins in this community
  * @gpp_size: Maximum number of pads in each group, such as PADCFGLOCK,
@@ -98,6 +100,7 @@ struct intel_community {
 	unsigned padown_offset;
 	unsigned padcfglock_offset;
 	unsigned hostown_offset;
+	unsigned is_offset;
 	unsigned ie_offset;
 	unsigned pin_base;
 	unsigned gpp_size;