Commit cf9d615f authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'regulator-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "The biggest changes in the core this time around have been some
  refactorings that move us towards being able to drop the list of
  regulators maintained by the core and instead just use the driver
  model list maintained for the class devices for regulators which will
  make the code smaller and avoid some potential bugs.

  Otherwise another fairly quiet release for the regulator API,
  highlights include:

   - a new API for setting voltages based on a minimum, target, maximum
     triplet

   - support for continuous voltage ranges rather than tables of
     explicit steps in the PWM regulator, requiring less explicit
     configuration

   - new driver support for Dialog DA9215, Maxim 77843, Mediatek MT6311
     and Qualcomm RPM"

* tag 'regulator-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (70 commits)
  regulator: mt6311: fix platform_no_drv_owner.cocci warnings
  regulator: ltc3589: Remove unnecessary MODULE_ALIAS()
  regulator: ad5398: Remove unnecessary MODULE_ALIAS()
  regulator: pfuze100: Remove unnecessary MODULE_ALIAS()
  regulator: core: use debug level print in regulator_check_drms
  regulator: lp872x: handle error case
  regulator: lp872x: use the private data instead of updating I2C device platform data
  regulator: isl9305: Export OF module alias information
  regulators: max77693: register driver earlier to avoid deferred probe
  regulator: qcom_smd: Set n_voltages for pm8941_lnldo
  regulator: core: Use IS_ERR_OR_NULL()
  regulator: core: Define regulator_set_voltage_triplet()
  regulator: Regulator driver for the Qualcomm RPM
  regulator: pbias: Fix broken pbias disable functionality
  regulator: core: Spelling fix
  regulator: core: Use class device list for regulator_list in late init
  regulator: core: Move more deallocation into class unregister
  regulator: core: Reduce rdev locking region when releasing regulator
  Input: Remove the max77843 haptic driver
  Input: max77693: Add support for Maxim 77843
  ...
parents e2701603 f5164b88
......@@ -24,6 +24,10 @@ Optional properties:
- vcc10-supply: The input supply for LDO_REG6
- vcc11-supply: The input supply for LDO_REG8
- vcc12-supply: The input supply for SWITCH_REG2
- dvs-gpios: buck1/2 can be controlled by gpio dvs, this is GPIO specifiers
for 2 host gpio's used for dvs. The format of the gpio specifier depends in
the gpio controller. If DVS GPIOs aren't present, voltage changes will happen
very quickly with no slow ramp time.
Regulators: All the regulators of RK808 to be instantiated shall be
listed in a child node named 'regulators'. Each regulator is represented
......@@ -55,7 +59,9 @@ Example:
interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;
pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>;
dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
<&gpio7 15 GPIO_ACTIVE_HIGH>;
reg = <0x1b>;
rockchip,system-power-controller;
wakeup-source;
......
......@@ -5,6 +5,10 @@ Required properties:
- compatible: must be "dlg,da9210"
- reg: the i2c slave address of the regulator. It should be 0x68.
Optional properties:
- interrupts: a reference to the DA9210 interrupt, if available.
Any standard regulator properties can be used to configure the single da9210
DCDC.
......
* Dialog Semiconductor DA9211/DA9213 Voltage Regulator
* Dialog Semiconductor DA9211/DA9213/DA9215 Voltage Regulator
Required properties:
- compatible: "dlg,da9211" or "dlg,da9213".
- compatible: "dlg,da9211" or "dlg,da9213" or "dlg,da9215"
- reg: I2C slave address, usually 0x68.
- interrupts: the interrupt outputs of the controller
- regulators: A node that houses a sub-node for each regulator within the
......@@ -66,3 +66,31 @@ Example 2) DA9213
};
};
};
Example 3) DA9215
pmic: da9215@68 {
compatible = "dlg,da9215";
reg = <0x68>;
interrupts = <3 27>;
regulators {
BUCKA {
regulator-name = "VBUCKA";
regulator-min-microvolt = < 300000>;
regulator-max-microvolt = <1570000>;
regulator-min-microamp = <4000000>;
regulator-max-microamp = <7000000>;
enable-gpios = <&gpio 27 0>;
};
BUCKB {
regulator-name = "VBUCKB";
regulator-min-microvolt = < 300000>;
regulator-max-microvolt = <1570000>;
regulator-min-microamp = <4000000>;
regulator-max-microamp = <7000000>;
enable-gpios = <&gpio 17 0>;
};
};
};
......@@ -25,6 +25,12 @@ Optional properties:
-maxim,enable-frequency-shift: boolean, enable 9% frequency shift.
-maxim,enable-bias-control: boolean, enable bias control. By enabling this
startup delay can be reduce to 20us from 220us.
-maxim,enable-etr: boolean, enable Enhanced Transient Response.
-maxim,enable-high-etr-sensitivity: boolean, Enhanced transient response
circuit is enabled and set for high sensitivity. If this
property is available then etr will be enable default.
Enhanced transient response (ETR) will affect the configuration of CKADV.
Example:
......
Mediatek MT6311 Regulator Driver
Required properties:
- compatible: "mediatek,mt6311-regulator"
- reg: I2C slave address, usually 0x6b.
- regulators: List of regulators provided by this controller. It is named
to VDVFS and VBIASN.
The definition for each of these nodes is defined using the standard binding
for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
The valid names for regulators are:
BUCK:
VDVFS
LDO:
VBIASN
Example:
mt6311: pmic@6b {
compatible = "mediatek,mt6311-regulator";
reg = <0x6b>;
regulators {
mt6311_vcpu_reg: VDVFS {
regulator-name = "VDVFS";
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1400000>;
regulator-ramp-delay = <10000>;
};
mt6311_ldo_reg: VBIASN {
regulator-name = "VBIASN";
regulator-min-microvolt = <200000>;
regulator-max-microvolt = <800000>;
};
};
};
pwm regulator bindings
Bindings for the Generic PWM Regulator
======================================
Currently supports 2 modes of operation:
Voltage Table: When in this mode, a voltage table (See below) of
predefined voltage <=> duty-cycle values must be
provided via DT. Limitations are that the regulator can
only operate at the voltages supplied in the table.
Intermediary duty-cycle values which would normally
allow finer grained voltage selection are ignored and
rendered useless. Although more control is given to
the user if the assumptions made in continuous-voltage
mode do not reign true.
Continuous Voltage: This mode uses the regulator's maximum and minimum
supplied voltages specified in the
regulator-{min,max}-microvolt properties to calculate
appropriate duty-cycle values. This allows for a much
more fine grained solution when compared with
voltage-table mode above. This solution does make an
assumption that a %50 duty-cycle value will cause the
regulator voltage to run at half way between the
supplied max_uV and min_uV values.
Required properties:
- compatible: Should be "pwm-regulator"
- pwms: OF device-tree PWM specification (see PWM binding pwm.txt)
- voltage-table: voltage and duty table, include 2 members in each set of
brackets, first one is voltage(unit: uv), the next is duty(unit: percent)
--------------------
- compatible: Should be "pwm-regulator"
- pwms: PWM specification (See: ../pwm/pwm.txt)
Only required for Voltage Table Mode:
- voltage-table: Voltage and Duty-Cycle table consisting of 2 cells
First cell is voltage in microvolts (uV)
Second cell is duty-cycle in percent (%)
NB: To be clear, if voltage-table is provided, then the device will be used
in Voltage Table Mode. If no voltage-table is provided, then the device will
be used in Continuous Voltage Mode.
Any property defined as part of the core regulator binding defined in
regulator.txt can also be used.
Any property defined as part of the core regulator binding can also be used.
(See: ../regulator/regulator.txt)
Example:
Continuous Voltage Example:
pwm_regulator {
compatible = "pwm-regulator;
pwms = <&pwm1 0 8448 0>;
regulator-min-microvolt = <1016000>;
regulator-max-microvolt = <1114000>;
regulator-name = "vdd_logic";
};
Voltage Table Example:
pwm_regulator {
compatible = "pwm-regulator;
pwms = <&pwm1 0 8448 0>;
regulator-min-microvolt = <1016000>;
regulator-max-microvolt = <1114000>;
regulator-name = "vdd_logic";
/* Voltage Duty-Cycle */
voltage-table = <1114000 0>,
<1095000 10>,
<1076000 20>,
<1056000 30>,
<1036000 40>,
<1016000 50>;
regulator-min-microvolt = <1016000>;
regulator-max-microvolt = <1114000>;
regulator-name = "vdd_logic";
};
......@@ -91,13 +91,65 @@ see regulator.txt - with additional custom properties described below:
- regulator-initial-mode:
Usage: optional
Value type: <u32>
Descrption: 1 = Set initial mode to high power mode (HPM), also referred
to as NPM. HPM consumes more ground current than LPM, but
Description: 2 = Set initial mode to auto mode (automatically select
between HPM and LPM); not available on boost type
regulators.
1 = Set initial mode to high power mode (HPM), also referred
to as NPM. HPM consumes more ground current than LPM, but
it can source significantly higher load current. HPM is not
available on boost type regulators. For voltage switch type
regulators, HPM implies that over current protection and
soft start are active all the time. 0 = Set initial mode to
low power mode (LPM).
soft start are active all the time.
0 = Set initial mode to low power mode (LPM).
- qcom,ocp-max-retries:
Usage: optional
Value type: <u32>
Description: Maximum number of times to try toggling a voltage switch
off and back on as a result of consecutive over current
events.
- qcom,ocp-retry-delay:
Usage: optional
Value type: <u32>
Description: Time to delay in milliseconds between each voltage switch
toggle after an over current event takes place.
- qcom,pin-ctrl-enable:
Usage: optional
Value type: <u32>
Description: Bit mask specifying which hardware pins should be used to
enable the regulator, if any; supported bits are:
0 = ignore all hardware enable signals
BIT(0) = follow HW0_EN signal
BIT(1) = follow HW1_EN signal
BIT(2) = follow HW2_EN signal
BIT(3) = follow HW3_EN signal
- qcom,pin-ctrl-hpm:
Usage: optional
Value type: <u32>
Description: Bit mask specifying which hardware pins should be used to
force the regulator into high power mode, if any;
supported bits are:
0 = ignore all hardware enable signals
BIT(0) = follow HW0_EN signal
BIT(1) = follow HW1_EN signal
BIT(2) = follow HW2_EN signal
BIT(3) = follow HW3_EN signal
BIT(4) = follow PMIC awake state
- qcom,vs-soft-start-strength:
Usage: optional
Value type: <u32>
Description: This property sets the soft start strength for voltage
switch type regulators; supported values are:
0 = 0.05 uA
1 = 0.25 uA
2 = 0.55 uA
3 = 0.75 uA
Example:
......
......@@ -42,6 +42,7 @@ Optional properties:
- regulator-system-load: Load in uA present on regulator that is not captured by
any consumer request.
- regulator-pull-down: Enable pull down resistor when the regulator is disabled.
- regulator-over-current-protection: Enable over current protection.
Deprecated properties:
- regulator-compatible: If a regulator chip contains multiple
......
......@@ -24,6 +24,7 @@
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/mfd/max77693.h>
#include <linux/mfd/max77693-common.h>
#include <linux/mfd/max77693-private.h>
#include <linux/extcon.h>
#include <linux/regmap.h>
......@@ -42,7 +43,7 @@ static struct max77693_reg_data default_init_data[] = {
{
/* STATUS2 - [3]ChgDetRun */
.addr = MAX77693_MUIC_REG_STATUS2,
.data = STATUS2_CHGDETRUN_MASK,
.data = MAX77693_STATUS2_CHGDETRUN_MASK,
}, {
/* INTMASK1 - Unmask [3]ADC1KM,[0]ADCM */
.addr = MAX77693_MUIC_REG_INTMASK1,
......@@ -235,7 +236,7 @@ static int max77693_muic_set_debounce_time(struct max77693_muic_info *info,
*/
ret = regmap_write(info->max77693->regmap_muic,
MAX77693_MUIC_REG_CTRL3,
time << CONTROL3_ADCDBSET_SHIFT);
time << MAX77693_CONTROL3_ADCDBSET_SHIFT);
if (ret) {
dev_err(info->dev, "failed to set ADC debounce time\n");
return ret;
......@@ -268,7 +269,7 @@ static int max77693_muic_set_path(struct max77693_muic_info *info,
if (attached)
ctrl1 = val;
else
ctrl1 = CONTROL1_SW_OPEN;
ctrl1 = MAX77693_CONTROL1_SW_OPEN;
ret = regmap_update_bits(info->max77693->regmap_muic,
MAX77693_MUIC_REG_CTRL1, COMP_SW_MASK, ctrl1);
......@@ -278,13 +279,14 @@ static int max77693_muic_set_path(struct max77693_muic_info *info,
}
if (attached)
ctrl2 |= CONTROL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */
ctrl2 |= MAX77693_CONTROL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */
else
ctrl2 |= CONTROL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */
ctrl2 |= MAX77693_CONTROL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */
ret = regmap_update_bits(info->max77693->regmap_muic,
MAX77693_MUIC_REG_CTRL2,
CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK, ctrl2);
MAX77693_CONTROL2_LOWPWR_MASK | MAX77693_CONTROL2_CPEN_MASK,
ctrl2);
if (ret < 0) {
dev_err(info->dev, "failed to update MUIC register\n");
return ret;
......@@ -326,8 +328,8 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
* Read ADC value to check cable type and decide cable state
* according to cable type
*/
adc = info->status[0] & STATUS1_ADC_MASK;
adc >>= STATUS1_ADC_SHIFT;
adc = info->status[0] & MAX77693_STATUS1_ADC_MASK;
adc >>= MAX77693_STATUS1_ADC_SHIFT;
/*
* Check current cable state/cable type and store cable type
......@@ -350,8 +352,8 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
* Read ADC value to check cable type and decide cable state
* according to cable type
*/
adc = info->status[0] & STATUS1_ADC_MASK;
adc >>= STATUS1_ADC_SHIFT;
adc = info->status[0] & MAX77693_STATUS1_ADC_MASK;
adc >>= MAX77693_STATUS1_ADC_SHIFT;
/*
* Check current cable state/cable type and store cable type
......@@ -366,13 +368,13 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
} else {
*attached = true;
adclow = info->status[0] & STATUS1_ADCLOW_MASK;
adclow >>= STATUS1_ADCLOW_SHIFT;
adc1k = info->status[0] & STATUS1_ADC1K_MASK;
adc1k >>= STATUS1_ADC1K_SHIFT;
adclow = info->status[0] & MAX77693_STATUS1_ADCLOW_MASK;
adclow >>= MAX77693_STATUS1_ADCLOW_SHIFT;
adc1k = info->status[0] & MAX77693_STATUS1_ADC1K_MASK;
adc1k >>= MAX77693_STATUS1_ADC1K_SHIFT;
vbvolt = info->status[1] & STATUS2_VBVOLT_MASK;
vbvolt >>= STATUS2_VBVOLT_SHIFT;
vbvolt = info->status[1] & MAX77693_STATUS2_VBVOLT_MASK;
vbvolt >>= MAX77693_STATUS2_VBVOLT_SHIFT;
/**
* [0x1|VBVolt|ADCLow|ADC1K]
......@@ -397,8 +399,8 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
* Read charger type to check cable type and decide cable state
* according to type of charger cable.
*/
chg_type = info->status[1] & STATUS2_CHGTYP_MASK;
chg_type >>= STATUS2_CHGTYP_SHIFT;
chg_type = info->status[1] & MAX77693_STATUS2_CHGTYP_MASK;
chg_type >>= MAX77693_STATUS2_CHGTYP_SHIFT;
if (chg_type == MAX77693_CHARGER_TYPE_NONE) {
*attached = false;
......@@ -422,10 +424,10 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
* Read ADC value to check cable type and decide cable state
* according to cable type
*/
adc = info->status[0] & STATUS1_ADC_MASK;
adc >>= STATUS1_ADC_SHIFT;
chg_type = info->status[1] & STATUS2_CHGTYP_MASK;
chg_type >>= STATUS2_CHGTYP_SHIFT;
adc = info->status[0] & MAX77693_STATUS1_ADC_MASK;
adc >>= MAX77693_STATUS1_ADC_SHIFT;
chg_type = info->status[1] & MAX77693_STATUS2_CHGTYP_MASK;
chg_type >>= MAX77693_STATUS2_CHGTYP_SHIFT;
if (adc == MAX77693_MUIC_ADC_OPEN
&& chg_type == MAX77693_CHARGER_TYPE_NONE)
......@@ -437,8 +439,8 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
* Read vbvolt field, if vbvolt is 1,
* this cable is used for charging.
*/
vbvolt = info->status[1] & STATUS2_VBVOLT_MASK;
vbvolt >>= STATUS2_VBVOLT_SHIFT;
vbvolt = info->status[1] & MAX77693_STATUS2_VBVOLT_MASK;
vbvolt >>= MAX77693_STATUS2_VBVOLT_SHIFT;
cable_type = vbvolt;
break;
......@@ -520,7 +522,8 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
}
/* Dock-Car/Desk/Audio, PATH:AUDIO */
ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
ret = max77693_muic_set_path(info, MAX77693_CONTROL1_SW_AUDIO,
attached);
if (ret < 0)
return ret;
extcon_set_cable_state_(info->edev, dock_id, attached);
......@@ -585,14 +588,16 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
case MAX77693_MUIC_GND_USB_HOST:
case MAX77693_MUIC_GND_USB_HOST_VB:
/* USB_HOST, PATH: AP_USB */
ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
ret = max77693_muic_set_path(info, MAX77693_CONTROL1_SW_USB,
attached);
if (ret < 0)
return ret;
extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
break;
case MAX77693_MUIC_GND_AV_CABLE_LOAD:
/* Audio Video Cable with load, PATH:AUDIO */
ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
ret = max77693_muic_set_path(info, MAX77693_CONTROL1_SW_AUDIO,
attached);
if (ret < 0)
return ret;
extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
......@@ -615,7 +620,7 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
int cable_type, bool attached)
{
int ret = 0;
u8 path = CONTROL1_SW_OPEN;
u8 path = MAX77693_CONTROL1_SW_OPEN;
dev_info(info->dev,
"external connector is %s (adc:0x%02x)\n",
......@@ -625,12 +630,12 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF: /* ADC_JIG_USB_OFF */
case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON: /* ADC_JIG_USB_ON */
/* PATH:AP_USB */
path = CONTROL1_SW_USB;
path = MAX77693_CONTROL1_SW_USB;
break;
case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF: /* ADC_JIG_UART_OFF */
case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON: /* ADC_JIG_UART_ON */
/* PATH:AP_UART */
path = CONTROL1_SW_UART;
path = MAX77693_CONTROL1_SW_UART;
break;
default:
dev_err(info->dev, "failed to detect %s jig cable\n",
......@@ -1077,7 +1082,7 @@ static int max77693_muic_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "allocate register map\n");
} else {
info->max77693->regmap_muic = devm_regmap_init_i2c(
info->max77693->muic,
info->max77693->i2c_muic,
&max77693_muic_regmap_config);
if (IS_ERR(info->max77693->regmap_muic)) {
ret = PTR_ERR(info->max77693->regmap_muic);
......@@ -1164,28 +1169,9 @@ static int max77693_muic_probe(struct platform_device *pdev)
}
for (i = 0; i < num_init_data; i++) {
enum max77693_irq_source irq_src
= MAX77693_IRQ_GROUP_NR;
regmap_write(info->max77693->regmap_muic,
init_data[i].addr,
init_data[i].data);
switch (init_data[i].addr) {
case MAX77693_MUIC_REG_INTMASK1:
irq_src = MUIC_INT1;
break;
case MAX77693_MUIC_REG_INTMASK2:
irq_src = MUIC_INT2;
break;
case MAX77693_MUIC_REG_INTMASK3:
irq_src = MUIC_INT3;
break;
}
if (irq_src < MAX77693_IRQ_GROUP_NR)
info->max77693->irq_masks_cur[irq_src]
= init_data[i].data;
}
if (pdata && pdata->muic_data) {
......@@ -1199,12 +1185,12 @@ static int max77693_muic_probe(struct platform_device *pdev)
if (muic_pdata->path_uart)
info->path_uart = muic_pdata->path_uart;
else
info->path_uart = CONTROL1_SW_UART;
info->path_uart = MAX77693_CONTROL1_SW_UART;
if (muic_pdata->path_usb)
info->path_usb = muic_pdata->path_usb;
else
info->path_usb = CONTROL1_SW_USB;
info->path_usb = MAX77693_CONTROL1_SW_USB;
/*
* Default delay time for detecting cable state
......@@ -1216,8 +1202,8 @@ static int max77693_muic_probe(struct platform_device *pdev)
else
delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
} else {
info->path_usb = CONTROL1_SW_USB;
info->path_uart = CONTROL1_SW_UART;
info->path_usb = MAX77693_CONTROL1_SW_USB;
info->path_uart = MAX77693_CONTROL1_SW_UART;
delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
}
......
......@@ -15,6 +15,7 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mfd/max77693-common.h>
#include <linux/mfd/max77843-private.h>
#include <linux/module.h>
#include <linux/platform_device.h>
......@@ -32,7 +33,7 @@ enum max77843_muic_status {
struct max77843_muic_info {
struct device *dev;
struct max77843 *max77843;
struct max77693_dev *max77843;
struct extcon_dev *edev;
struct mutex mutex;
......@@ -198,18 +199,18 @@ static const struct regmap_irq_chip max77843_muic_irq_chip = {
static int max77843_muic_set_path(struct max77843_muic_info *info,
u8 val, bool attached)
{
struct max77843 *max77843 = info->max77843;
struct max77693_dev *max77843 = info->max77843;
int ret = 0;
unsigned int ctrl1, ctrl2;
if (attached)
ctrl1 = val;
else
ctrl1 = CONTROL1_SW_OPEN;
ctrl1 = MAX77843_MUIC_CONTROL1_SW_OPEN;
ret = regmap_update_bits(max77843->regmap_muic,
MAX77843_MUIC_REG_CONTROL1,
CONTROL1_COM_SW, ctrl1);
MAX77843_MUIC_CONTROL1_COM_SW, ctrl1);
if (ret < 0) {
dev_err(info->dev, "Cannot switch MUIC port\n");
return ret;
......@@ -243,7 +244,7 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
adc = info->status[MAX77843_MUIC_STATUS1] &
MAX77843_MUIC_STATUS1_ADC_MASK;
adc >>= STATUS1_ADC_SHIFT;
adc >>= MAX77843_MUIC_STATUS1_ADC_SHIFT;
switch (group) {
case MAX77843_CABLE_GROUP_ADC:
......@@ -309,7 +310,7 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
/* Get VBVolt register bit */
gnd_type |= (info->status[MAX77843_MUIC_STATUS2] &
MAX77843_MUIC_STATUS2_VBVOLT_MASK);
gnd_type >>= STATUS2_VBVOLT_SHIFT;
gnd_type >>= MAX77843_MUIC_STATUS2_VBVOLT_SHIFT;
/* Offset of GND cable */
gnd_type |= MAX77843_MUIC_GND_USB_HOST;
......@@ -338,7 +339,9 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
switch (gnd_cable_type) {
case MAX77843_MUIC_GND_USB_HOST:
case MAX77843_MUIC_GND_USB_HOST_VB:
ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
ret = max77843_muic_set_path(info,
MAX77843_MUIC_CONTROL1_SW_USB,
attached);
if (ret < 0)
return ret;
......@@ -346,7 +349,9 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
break;
case MAX77843_MUIC_GND_MHL_VB:
case MAX77843_MUIC_GND_MHL:
ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
ret = max77843_muic_set_path(info,
MAX77843_MUIC_CONTROL1_SW_OPEN,
attached);
if (ret < 0)
return ret;
......@@ -365,7 +370,7 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
int cable_type, bool attached)
{
int ret;
u8 path = CONTROL1_SW_OPEN;
u8 path = MAX77843_MUIC_CONTROL1_SW_OPEN;
dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
attached ? "attached" : "detached", cable_type);
......@@ -373,10 +378,10 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
switch (cable_type) {
case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
path = CONTROL1_SW_USB;
path = MAX77843_MUIC_CONTROL1_SW_USB;
break;
case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
path = CONTROL1_SW_UART;
path = MAX77843_MUIC_CONTROL1_SW_UART;
break;
default:
return -EINVAL;
......@@ -474,14 +479,18 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
switch (chg_type) {
case MAX77843_MUIC_CHG_USB:
ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
ret = max77843_muic_set_path(info,
MAX77843_MUIC_CONTROL1_SW_USB,
attached);
if (ret < 0)
return ret;
extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
break;
case MAX77843_MUIC_CHG_DOWNSTREAM:
ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
ret = max77843_muic_set_path(info,
MAX77843_MUIC_CONTROL1_SW_OPEN,
attached);
if (ret < 0)
return ret;
......@@ -489,14 +498,18 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
attached);
break;
case MAX77843_MUIC_CHG_DEDICATED:
ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
ret = max77843_muic_set_path(info,
MAX77843_MUIC_CONTROL1_SW_OPEN,
attached);
if (ret < 0)
return ret;
extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
break;
case MAX77843_MUIC_CHG_SPECIAL_500MA:
ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
ret = max77843_muic_set_path(info,
MAX77843_MUIC_CONTROL1_SW_OPEN,
attached);
if (ret < 0)
return ret;
......@@ -504,7 +517,9 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
attached);
break;
case MAX77843_MUIC_CHG_SPECIAL_1A:
ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
ret = max77843_muic_set_path(info,
MAX77843_MUIC_CONTROL1_SW_OPEN,
attached);
if (ret < 0)
return ret;
......@@ -528,7 +543,8 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
"failed to detect %s accessory (chg_type:0x%x)\n",
attached ? "attached" : "detached", chg_type);
max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN,
attached);
return -EINVAL;
}
......@@ -539,7 +555,7 @@ static void max77843_muic_irq_work(struct work_struct *work)
{
struct max77843_muic_info *info = container_of(work,
struct max77843_muic_info, irq_work);
struct max77843 *max77843 = info->max77843;
struct max77693_dev *max77843 = info->max77843;
int ret = 0;
mutex_lock(&info->mutex);
......@@ -615,7 +631,7 @@ static void max77843_muic_detect_cable_wq(struct work_struct *work)
{
struct max77843_muic_info *info = container_of(to_delayed_work(work),
struct max77843_muic_info, wq_detcable);
struct max77843 *max77843 = info->max77843;
struct max77693_dev *max77843 = info->max77843;
int chg_type, adc, ret;
bool attached;
......@@ -656,7 +672,7 @@ static void max77843_muic_detect_cable_wq(struct work_struct *work)
static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
enum max77843_muic_adc_debounce_time time)
{
struct max77843 *max77843 = info->max77843;
struct max77693_dev *max77843 = info->max77843;
int ret;
switch (time) {
......@@ -667,7 +683,7 @@ static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
ret = regmap_update_bits(max77843->regmap_muic,
MAX77843_MUIC_REG_CONTROL4,
MAX77843_MUIC_CONTROL4_ADCDBSET_MASK,
time << CONTROL4_ADCDBSET_SHIFT);
time << MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT);
if (ret < 0) {
dev_err(info->dev, "Cannot write MUIC regmap\n");
return ret;
......@@ -681,7 +697,7 @@ static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
return 0;
}
static int max77843_init_muic_regmap(struct max77843 *max77843)
static int max77843_init_muic_regmap(struct max77693_dev *max77843)
{
int ret;
......@@ -720,7 +736,7 @@ static int max77843_init_muic_regmap(struct max77843 *max77843)
static int max77843_muic_probe(struct platform_device *pdev)
{
struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
struct max77693_dev *max77843 = dev_get_drvdata(pdev->dev.parent);
struct max77843_muic_info *info;
unsigned int id;
int i, ret;
......@@ -768,7 +784,7 @@ static int max77843_muic_probe(struct platform_device *pdev)
max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS);
/* Set initial path for UART */
max77843_muic_set_path(info, CONTROL1_SW_UART, true);
max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true);
/* Check revision number of MUIC device */
ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id);
......@@ -830,7 +846,7 @@ static int max77843_muic_probe(struct platform_device *pdev)
static int max77843_muic_remove(struct platform_device *pdev)
{
struct max77843_muic_info *info = platform_get_drvdata(pdev);
struct max77843 *max77843 = info->max77843;
struct max77693_dev *max77843 = info->max77843;
cancel_work_sync(&info->irq_work);
regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
......
......@@ -167,28 +167,16 @@ config INPUT_M68K_BEEP
depends on M68K
config INPUT_MAX77693_HAPTIC
tristate "MAXIM MAX77693 haptic controller support"
depends on MFD_MAX77693 && PWM
tristate "MAXIM MAX77693/MAX77843 haptic controller support"
depends on (MFD_MAX77693 || MFD_MAX77843) && PWM
select INPUT_FF_MEMLESS
help
This option enables support for the haptic controller on
MAXIM MAX77693 chip.
MAXIM MAX77693 and MAX77843 chips.
To compile this driver as module, choose M here: the
module will be called max77693-haptic.
config INPUT_MAX77843_HAPTIC
tristate "MAXIM MAX77843 haptic controller support"
depends on MFD_MAX77843 && REGULATOR
select INPUT_FF_MEMLESS
help
This option enables support for the haptic controller on
MAXIM MAX77843 chip. The driver supports ff-memless interface
from input framework.
To compile this driver as module, choose M here: the
module will be called max77843-haptic.
config INPUT_MAX8925_ONKEY
tristate "MAX8925 ONKEY support"
depends on MFD_MAX8925
......
......@@ -41,7 +41,6 @@ obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
obj-$(CONFIG_INPUT_MAX77693_HAPTIC) += max77693-haptic.o
obj-$(CONFIG_INPUT_MAX77843_HAPTIC) += max77843-haptic.o
obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
obj-$(CONFIG_INPUT_MAX8997_HAPTIC) += max8997_haptic.o
obj-$(CONFIG_INPUT_MC13783_PWRBUTTON) += mc13783-pwrbutton.o
......
/*
* MAXIM MAX77693 Haptic device driver
* MAXIM MAX77693/MAX77843 Haptic device driver
*
* Copyright (C) 2014 Samsung Electronics
* Copyright (C) 2014,2015 Samsung Electronics
* Jaewon Kim <jaewon02.kim@samsung.com>
* Krzysztof Kozlowski <k.kozlowski@samsung.com>
*
* This program is not provided / owned by Maxim Integrated Products.
*
......@@ -24,7 +25,9 @@
#include <linux/workqueue.h>
#include <linux/regulator/consumer.h>
#include <linux/mfd/max77693.h>
#include <linux/mfd/max77693-common.h>
#include <linux/mfd/max77693-private.h>
#include <linux/mfd/max77843-private.h>
#define MAX_MAGNITUDE_SHIFT 16
......@@ -46,6 +49,8 @@ enum max77693_haptic_pwm_divisor {
};
struct max77693_haptic {
enum max77693_types dev_type;
struct regmap *regmap_pmic;
struct regmap *regmap_haptic;
struct device *dev;
......@@ -59,7 +64,6 @@ struct max77693_haptic {
unsigned int pwm_duty;
enum max77693_haptic_motor_type type;
enum max77693_haptic_pulse_mode mode;
enum max77693_haptic_pwm_divisor pwm_divisor;
struct work_struct work;
};
......@@ -78,19 +82,52 @@ static int max77693_haptic_set_duty_cycle(struct max77693_haptic *haptic)
return 0;
}
static int max77843_haptic_bias(struct max77693_haptic *haptic, bool on)
{
int error;
if (haptic->dev_type != TYPE_MAX77843)
return 0;
error = regmap_update_bits(haptic->regmap_haptic,
MAX77843_SYS_REG_MAINCTRL1,
MAX77843_MAINCTRL1_BIASEN_MASK,
on << MAINCTRL1_BIASEN_SHIFT);
if (error) {
dev_err(haptic->dev, "failed to %s bias: %d\n",
on ? "enable" : "disable", error);
return error;
}
return 0;
}
static int max77693_haptic_configure(struct max77693_haptic *haptic,
bool enable)
{
unsigned int value;
unsigned int value, config_reg;
int error;
value = ((haptic->type << MAX77693_CONFIG2_MODE) |
(enable << MAX77693_CONFIG2_MEN) |
(haptic->mode << MAX77693_CONFIG2_HTYP) |
(haptic->pwm_divisor));
switch (haptic->dev_type) {
case TYPE_MAX77693:
value = ((haptic->type << MAX77693_CONFIG2_MODE) |
(enable << MAX77693_CONFIG2_MEN) |
(haptic->mode << MAX77693_CONFIG2_HTYP) |
MAX77693_HAPTIC_PWM_DIVISOR_128);
config_reg = MAX77693_HAPTIC_REG_CONFIG2;
break;
case TYPE_MAX77843:
value = (haptic->type << MCONFIG_MODE_SHIFT) |
(enable << MCONFIG_MEN_SHIFT) |
MAX77693_HAPTIC_PWM_DIVISOR_128;
config_reg = MAX77843_HAP_REG_MCONFIG;
break;
default:
return -EINVAL;
}
error = regmap_write(haptic->regmap_haptic,
MAX77693_HAPTIC_REG_CONFIG2, value);
config_reg, value);
if (error) {
dev_err(haptic->dev,
"failed to update haptic config: %d\n", error);
......@@ -104,6 +141,9 @@ static int max77693_haptic_lowsys(struct max77693_haptic *haptic, bool enable)
{
int error;
if (haptic->dev_type != TYPE_MAX77693)
return 0;
error = regmap_update_bits(haptic->regmap_pmic,
MAX77693_PMIC_REG_LSCNFG,
MAX77693_PMIC_LOW_SYS_MASK,
......@@ -219,6 +259,10 @@ static int max77693_haptic_open(struct input_dev *dev)
struct max77693_haptic *haptic = input_get_drvdata(dev);
int error;
error = max77843_haptic_bias(haptic, true);
if (error)
return error;
error = regulator_enable(haptic->motor_reg);
if (error) {
dev_err(haptic->dev,
......@@ -241,6 +285,8 @@ static void max77693_haptic_close(struct input_dev *dev)
if (error)
dev_err(haptic->dev,
"failed to disable regulator: %d\n", error);
max77843_haptic_bias(haptic, false);
}
static int max77693_haptic_probe(struct platform_device *pdev)
......@@ -254,13 +300,26 @@ static int max77693_haptic_probe(struct platform_device *pdev)
return -ENOMEM;
haptic->regmap_pmic = max77693->regmap;
haptic->regmap_haptic = max77693->regmap_haptic;
haptic->dev = &pdev->dev;
haptic->type = MAX77693_HAPTIC_LRA;
haptic->mode = MAX77693_HAPTIC_EXTERNAL_MODE;
haptic->pwm_divisor = MAX77693_HAPTIC_PWM_DIVISOR_128;
haptic->suspend_state = false;
/* Variant-specific init */
haptic->dev_type = platform_get_device_id(pdev)->driver_data;
switch (haptic->dev_type) {
case TYPE_MAX77693:
haptic->regmap_haptic = max77693->regmap_haptic;
break;
case TYPE_MAX77843:
haptic->regmap_haptic = max77693->regmap;
break;
default:
dev_err(&pdev->dev, "unsupported device type: %u\n",
haptic->dev_type);
return -EINVAL;
}
INIT_WORK(&haptic->work, max77693_haptic_play_work);
/* Get pwm and regulatot for haptic device */
......@@ -338,16 +397,25 @@ static int __maybe_unused max77693_haptic_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(max77693_haptic_pm_ops,
max77693_haptic_suspend, max77693_haptic_resume);
static const struct platform_device_id max77693_haptic_id[] = {
{ "max77693-haptic", TYPE_MAX77693 },
{ "max77843-haptic", TYPE_MAX77843 },
{},
};
MODULE_DEVICE_TABLE(platform, max77693_haptic_id);
static struct platform_driver max77693_haptic_driver = {
.driver = {
.name = "max77693-haptic",
.pm = &max77693_haptic_pm_ops,
},
.probe = max77693_haptic_probe,
.id_table = max77693_haptic_id,
};
module_platform_driver(max77693_haptic_driver);
MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
MODULE_DESCRIPTION("MAXIM MAX77693 Haptic driver");
MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski@samsung.com>");
MODULE_DESCRIPTION("MAXIM 77693/77843 Haptic driver");
MODULE_ALIAS("platform:max77693-haptic");
MODULE_LICENSE("GPL");
/*
* MAXIM MAX77693 Haptic device driver
*
* Copyright (C) 2015 Samsung Electronics
* Author: Jaewon Kim <jaewon02.kim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/mfd/max77843-private.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
#define MAX_MAGNITUDE_SHIFT 16
enum max77843_haptic_motor_type {
MAX77843_HAPTIC_ERM = 0,
MAX77843_HAPTIC_LRA,
};
enum max77843_haptic_pwm_divisor {
MAX77843_HAPTIC_PWM_DIVISOR_32 = 0,
MAX77843_HAPTIC_PWM_DIVISOR_64,
MAX77843_HAPTIC_PWM_DIVISOR_128,
MAX77843_HAPTIC_PWM_DIVISOR_256,
};
struct max77843_haptic {
struct regmap *regmap_haptic;
struct device *dev;
struct input_dev *input_dev;
struct pwm_device *pwm_dev;
struct regulator *motor_reg;
struct work_struct work;
struct mutex mutex;
unsigned int magnitude;
unsigned int pwm_duty;
bool active;
bool suspended;
enum max77843_haptic_motor_type type;
enum max77843_haptic_pwm_divisor pwm_divisor;
};
static int max77843_haptic_set_duty_cycle(struct max77843_haptic *haptic)
{
int delta = (haptic->pwm_dev->period + haptic->pwm_duty) / 2;
int error;
error = pwm_config(haptic->pwm_dev, delta, haptic->pwm_dev->period);
if (error) {
dev_err(haptic->dev, "failed to configure pwm: %d\n", error);
return error;
}
return 0;
}
static int max77843_haptic_bias(struct max77843_haptic *haptic, bool on)
{
int error;
error = regmap_update_bits(haptic->regmap_haptic,
MAX77843_SYS_REG_MAINCTRL1,
MAX77843_MAINCTRL1_BIASEN_MASK,
on << MAINCTRL1_BIASEN_SHIFT);
if (error) {
dev_err(haptic->dev, "failed to %s bias: %d\n",
on ? "enable" : "disable", error);
return error;
}
return 0;
}
static int max77843_haptic_config(struct max77843_haptic *haptic, bool enable)
{
unsigned int value;
int error;
value = (haptic->type << MCONFIG_MODE_SHIFT) |
(enable << MCONFIG_MEN_SHIFT) |
(haptic->pwm_divisor << MCONFIG_PDIV_SHIFT);
error = regmap_write(haptic->regmap_haptic,
MAX77843_HAP_REG_MCONFIG, value);
if (error) {
dev_err(haptic->dev,
"failed to update haptic config: %d\n", error);
return error;
}
return 0;
}
static int max77843_haptic_enable(struct max77843_haptic *haptic)
{
int error;
if (haptic->active)
return 0;
error = pwm_enable(haptic->pwm_dev);
if (error) {
dev_err(haptic->dev,
"failed to enable pwm device: %d\n", error);
return error;
}
error = max77843_haptic_config(haptic, true);
if (error)
goto err_config;
haptic->active = true;
return 0;
err_config:
pwm_disable(haptic->pwm_dev);
return error;
}
static int max77843_haptic_disable(struct max77843_haptic *haptic)
{
int error;
if (!haptic->active)
return 0;
error = max77843_haptic_config(haptic, false);
if (error)
return error;
pwm_disable(haptic->pwm_dev);
haptic->active = false;
return 0;
}
static void max77843_haptic_play_work(struct work_struct *work)
{
struct max77843_haptic *haptic =
container_of(work, struct max77843_haptic, work);
int error;
mutex_lock(&haptic->mutex);
if (haptic->suspended)
goto out_unlock;
if (haptic->magnitude) {
error = max77843_haptic_set_duty_cycle(haptic);
if (error) {
dev_err(haptic->dev,
"failed to set duty cycle: %d\n", error);
goto out_unlock;
}
error = max77843_haptic_enable(haptic);
if (error)
dev_err(haptic->dev,
"cannot enable haptic: %d\n", error);
} else {
error = max77843_haptic_disable(haptic);
if (error)
dev_err(haptic->dev,
"cannot disable haptic: %d\n", error);
}
out_unlock:
mutex_unlock(&haptic->mutex);
}
static int max77843_haptic_play_effect(struct input_dev *dev, void *data,
struct ff_effect *effect)
{
struct max77843_haptic *haptic = input_get_drvdata(dev);
u64 period_mag_multi;
haptic->magnitude = effect->u.rumble.strong_magnitude;
if (!haptic->magnitude)
haptic->magnitude = effect->u.rumble.weak_magnitude;
period_mag_multi = (u64)haptic->pwm_dev->period * haptic->magnitude;
haptic->pwm_duty = (unsigned int)(period_mag_multi >>
MAX_MAGNITUDE_SHIFT);
schedule_work(&haptic->work);
return 0;
}
static int max77843_haptic_open(struct input_dev *dev)
{
struct max77843_haptic *haptic = input_get_drvdata(dev);
int error;
error = max77843_haptic_bias(haptic, true);
if (error)
return error;
error = regulator_enable(haptic->motor_reg);
if (error) {
dev_err(haptic->dev,
"failed to enable regulator: %d\n", error);
return error;
}
return 0;
}
static void max77843_haptic_close(struct input_dev *dev)
{
struct max77843_haptic *haptic = input_get_drvdata(dev);
int error;
cancel_work_sync(&haptic->work);
max77843_haptic_disable(haptic);
error = regulator_disable(haptic->motor_reg);
if (error)
dev_err(haptic->dev,
"failed to disable regulator: %d\n", error);
max77843_haptic_bias(haptic, false);
}
static int max77843_haptic_probe(struct platform_device *pdev)
{
struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
struct max77843_haptic *haptic;
int error;
haptic = devm_kzalloc(&pdev->dev, sizeof(*haptic), GFP_KERNEL);
if (!haptic)
return -ENOMEM;
haptic->regmap_haptic = max77843->regmap;
haptic->dev = &pdev->dev;
haptic->type = MAX77843_HAPTIC_LRA;
haptic->pwm_divisor = MAX77843_HAPTIC_PWM_DIVISOR_128;
INIT_WORK(&haptic->work, max77843_haptic_play_work);
mutex_init(&haptic->mutex);
haptic->pwm_dev = devm_pwm_get(&pdev->dev, NULL);
if (IS_ERR(haptic->pwm_dev)) {
dev_err(&pdev->dev, "failed to get pwm device\n");
return PTR_ERR(haptic->pwm_dev);
}
haptic->motor_reg = devm_regulator_get_exclusive(&pdev->dev, "haptic");
if (IS_ERR(haptic->motor_reg)) {
dev_err(&pdev->dev, "failed to get regulator\n");
return PTR_ERR(haptic->motor_reg);
}
haptic->input_dev = devm_input_allocate_device(&pdev->dev);
if (!haptic->input_dev) {
dev_err(&pdev->dev, "failed to allocate input device\n");
return -ENOMEM;
}
haptic->input_dev->name = "max77843-haptic";
haptic->input_dev->id.version = 1;
haptic->input_dev->dev.parent = &pdev->dev;
haptic->input_dev->open = max77843_haptic_open;
haptic->input_dev->close = max77843_haptic_close;
input_set_drvdata(haptic->input_dev, haptic);
input_set_capability(haptic->input_dev, EV_FF, FF_RUMBLE);
error = input_ff_create_memless(haptic->input_dev, NULL,
max77843_haptic_play_effect);
if (error) {
dev_err(&pdev->dev, "failed to create force-feedback\n");
return error;
}
error = input_register_device(haptic->input_dev);
if (error) {
dev_err(&pdev->dev, "failed to register input device\n");
return error;
}
platform_set_drvdata(pdev, haptic);
return 0;
}
static int __maybe_unused max77843_haptic_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct max77843_haptic *haptic = platform_get_drvdata(pdev);
int error;
error = mutex_lock_interruptible(&haptic->mutex);
if (error)
return error;
max77843_haptic_disable(haptic);
haptic->suspended = true;
mutex_unlock(&haptic->mutex);
return 0;
}
static int __maybe_unused max77843_haptic_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct max77843_haptic *haptic = platform_get_drvdata(pdev);
unsigned int magnitude;
mutex_lock(&haptic->mutex);
haptic->suspended = false;
magnitude = ACCESS_ONCE(haptic->magnitude);
if (magnitude)
max77843_haptic_enable(haptic);
mutex_unlock(&haptic->mutex);
return 0;
}
static SIMPLE_DEV_PM_OPS(max77843_haptic_pm_ops,
max77843_haptic_suspend, max77843_haptic_resume);
static struct platform_driver max77843_haptic_driver = {
.driver = {
.name = "max77843-haptic",
.pm = &max77843_haptic_pm_ops,
},
.probe = max77843_haptic_probe,
};
module_platform_driver(max77843_haptic_driver);
MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
MODULE_DESCRIPTION("MAXIM MAX77843 Haptic driver");
MODULE_LICENSE("GPL");
......@@ -13,6 +13,7 @@
#include <linux/led-class-flash.h>
#include <linux/mfd/max77693.h>
#include <linux/mfd/max77693-common.h>
#include <linux/mfd/max77693-private.h>
#include <linux/module.h>
#include <linux/mutex.h>
......
......@@ -33,6 +33,7 @@
#include <linux/mutex.h>
#include <linux/mfd/core.h>
#include <linux/mfd/max77693.h>
#include <linux/mfd/max77693-common.h>
#include <linux/mfd/max77693-private.h>
#include <linux/regulator/machine.h>
#include <linux/regmap.h>
......@@ -193,22 +194,22 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
} else
dev_info(max77693->dev, "device ID: 0x%x\n", reg_data);
max77693->muic = i2c_new_dummy(i2c->adapter, I2C_ADDR_MUIC);
if (!max77693->muic) {
max77693->i2c_muic = i2c_new_dummy(i2c->adapter, I2C_ADDR_MUIC);
if (!max77693->i2c_muic) {
dev_err(max77693->dev, "Failed to allocate I2C device for MUIC\n");
return -ENODEV;
}
i2c_set_clientdata(max77693->muic, max77693);
i2c_set_clientdata(max77693->i2c_muic, max77693);
max77693->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC);
if (!max77693->haptic) {
max77693->i2c_haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC);
if (!max77693->i2c_haptic) {
dev_err(max77693->dev, "Failed to allocate I2C device for Haptic\n");
ret = -ENODEV;
goto err_i2c_haptic;
}
i2c_set_clientdata(max77693->haptic, max77693);
i2c_set_clientdata(max77693->i2c_haptic, max77693);
max77693->regmap_haptic = devm_regmap_init_i2c(max77693->haptic,
max77693->regmap_haptic = devm_regmap_init_i2c(max77693->i2c_haptic,
&max77693_regmap_haptic_config);
if (IS_ERR(max77693->regmap_haptic)) {
ret = PTR_ERR(max77693->regmap_haptic);
......@@ -222,7 +223,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
* instance of MUIC device when irq of max77693 is initialized
* before call max77693-muic probe() function.
*/
max77693->regmap_muic = devm_regmap_init_i2c(max77693->muic,
max77693->regmap_muic = devm_regmap_init_i2c(max77693->i2c_muic,
&max77693_regmap_muic_config);
if (IS_ERR(max77693->regmap_muic)) {
ret = PTR_ERR(max77693->regmap_muic);
......@@ -255,7 +256,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
IRQF_ONESHOT | IRQF_SHARED |
IRQF_TRIGGER_FALLING, 0,
&max77693_charger_irq_chip,
&max77693->irq_data_charger);
&max77693->irq_data_chg);
if (ret) {
dev_err(max77693->dev, "failed to add irq chip: %d\n", ret);
goto err_irq_charger;
......@@ -296,15 +297,15 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
err_intsrc:
regmap_del_irq_chip(max77693->irq, max77693->irq_data_muic);
err_irq_muic:
regmap_del_irq_chip(max77693->irq, max77693->irq_data_charger);
regmap_del_irq_chip(max77693->irq, max77693->irq_data_chg);
err_irq_charger:
regmap_del_irq_chip(max77693->irq, max77693->irq_data_topsys);
err_irq_topsys:
regmap_del_irq_chip(max77693->irq, max77693->irq_data_led);
err_regmap:
i2c_unregister_device(max77693->haptic);
i2c_unregister_device(max77693->i2c_haptic);
err_i2c_haptic:
i2c_unregister_device(max77693->muic);
i2c_unregister_device(max77693->i2c_muic);
return ret;
}
......@@ -315,12 +316,12 @@ static int max77693_i2c_remove(struct i2c_client *i2c)
mfd_remove_devices(max77693->dev);
regmap_del_irq_chip(max77693->irq, max77693->irq_data_muic);
regmap_del_irq_chip(max77693->irq, max77693->irq_data_charger);
regmap_del_irq_chip(max77693->irq, max77693->irq_data_chg);
regmap_del_irq_chip(max77693->irq, max77693->irq_data_topsys);
regmap_del_irq_chip(max77693->irq, max77693->irq_data_led);
i2c_unregister_device(max77693->muic);
i2c_unregister_device(max77693->haptic);
i2c_unregister_device(max77693->i2c_muic);
i2c_unregister_device(max77693->i2c_haptic);
return 0;
}
......
......@@ -17,6 +17,7 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/mfd/core.h>
#include <linux/mfd/max77693-common.h>
#include <linux/mfd/max77843-private.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
......@@ -71,7 +72,7 @@ static const struct regmap_irq_chip max77843_irq_chip = {
};
/* Charger and Charger regulator use same regmap. */
static int max77843_chg_init(struct max77843 *max77843)
static int max77843_chg_init(struct max77693_dev *max77843)
{
int ret;
......@@ -101,7 +102,7 @@ static int max77843_chg_init(struct max77843 *max77843)
static int max77843_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct max77843 *max77843;
struct max77693_dev *max77843;
unsigned int reg_data;
int ret;
......@@ -113,6 +114,7 @@ static int max77843_probe(struct i2c_client *i2c,
max77843->dev = &i2c->dev;
max77843->i2c = i2c;
max77843->irq = i2c->irq;
max77843->type = id->driver_data;
max77843->regmap = devm_regmap_init_i2c(i2c,
&max77843_regmap_config);
......@@ -123,7 +125,7 @@ static int max77843_probe(struct i2c_client *i2c,
ret = regmap_add_irq_chip(max77843->regmap, max77843->irq,
IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
0, &max77843_irq_chip, &max77843->irq_data);
0, &max77843_irq_chip, &max77843->irq_data_topsys);
if (ret) {
dev_err(&i2c->dev, "Failed to add TOPSYS IRQ chip\n");
return ret;
......@@ -164,18 +166,18 @@ static int max77843_probe(struct i2c_client *i2c,
return 0;
err_pmic_id:
regmap_del_irq_chip(max77843->irq, max77843->irq_data);
regmap_del_irq_chip(max77843->irq, max77843->irq_data_topsys);
return ret;
}
static int max77843_remove(struct i2c_client *i2c)
{
struct max77843 *max77843 = i2c_get_clientdata(i2c);
struct max77693_dev *max77843 = i2c_get_clientdata(i2c);
mfd_remove_devices(max77843->dev);
regmap_del_irq_chip(max77843->irq, max77843->irq_data);
regmap_del_irq_chip(max77843->irq, max77843->irq_data_topsys);
i2c_unregister_device(max77843->i2c_chg);
......@@ -188,7 +190,7 @@ static const struct of_device_id max77843_dt_match[] = {
};
static const struct i2c_device_id max77843_id[] = {
{ "max77843", },
{ "max77843", TYPE_MAX77843, },
{ },
};
MODULE_DEVICE_TABLE(i2c, max77843_id);
......@@ -196,7 +198,7 @@ MODULE_DEVICE_TABLE(i2c, max77843_id);
static int __maybe_unused max77843_suspend(struct device *dev)
{
struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
struct max77843 *max77843 = i2c_get_clientdata(i2c);
struct max77693_dev *max77843 = i2c_get_clientdata(i2c);
disable_irq(max77843->irq);
if (device_may_wakeup(dev))
......@@ -208,7 +210,7 @@ static int __maybe_unused max77843_suspend(struct device *dev)
static int __maybe_unused max77843_resume(struct device *dev)
{
struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
struct max77843 *max77843 = i2c_get_clientdata(i2c);
struct max77693_dev *max77843 = i2c_get_clientdata(i2c);
if (device_may_wakeup(dev))
disable_irq_wake(max77843->irq);
......
......@@ -20,6 +20,7 @@
#include <linux/power_supply.h>
#include <linux/regmap.h>
#include <linux/mfd/max77693.h>
#include <linux/mfd/max77693-common.h>
#include <linux/mfd/max77693-private.h>
#define MAX77693_CHARGER_NAME "max77693-charger"
......
This diff is collapsed.
......@@ -209,13 +209,13 @@ config REGULATOR_DA9210
interface.
config REGULATOR_DA9211
tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214 regulator"
tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator"
depends on I2C
select REGMAP_I2C
help
Say y here to support for the Dialog Semiconductor DA9211/DA9212
/DA9213/DA9214.
The DA9211/DA9212/DA9213/DA9214 is a multi-phase synchronous
/DA9213/DA9214/DA9215.
The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
step down converter 12A or 16A DC-DC Buck controlled through an I2C
interface.
......@@ -407,13 +407,13 @@ config REGULATOR_MAX77686
Exynos-4 chips to control VARM and VINT voltages.
config REGULATOR_MAX77693
tristate "Maxim MAX77693 regulator"
depends on MFD_MAX77693
tristate "Maxim 77693/77843 regulator"
depends on (MFD_MAX77693 || MFD_MAX77843)
help
This driver controls a Maxim 77693 regulator via I2C bus.
This driver controls a Maxim 77693/77843 regulators via I2C bus.
The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
and one current regulator 'CHARGER'. This is suitable for
Exynos-4x12 chips.
Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
config REGULATOR_MAX77802
tristate "Maxim 77802 regulator"
......@@ -424,14 +424,6 @@ config REGULATOR_MAX77802
Exynos5420/Exynos5800 SoCs to control various voltages.
It includes support for control of voltage and ramp speed.
config REGULATOR_MAX77843
tristate "Maxim 77843 regulator"
depends on MFD_MAX77843
help
This driver controls a Maxim 77843 regulator.
The regulator include two 'SAFEOUT' for USB(Universal Serial Bus)
This is suitable for Exynos5433 SoC chips.
config REGULATOR_MC13XXX_CORE
tristate
......@@ -451,6 +443,15 @@ config REGULATOR_MC13892
Say y here to support the regulators found on the Freescale MC13892
PMIC.
config REGULATOR_MT6311
tristate "MediaTek MT6311 PMIC"
depends on I2C
help
Say y here to select this option to enable the power regulator of
MediaTek MT6311 PMIC.
This driver supports the control of different power rails of device
through regulator interface.
config REGULATOR_MT6397
tristate "MediaTek MT6397 PMIC"
depends on MFD_MT6397
......@@ -522,6 +523,18 @@ config REGULATOR_QCOM_RPM
Qualcomm RPM as a module. The module will be named
"qcom_rpm-regulator".
config REGULATOR_QCOM_SMD_RPM
tristate "Qualcomm SMD based RPM regulator driver"
depends on QCOM_SMD_RPM
help
If you say yes to this option, support will be included for the
regulators exposed by the Resource Power Manager found in Qualcomm
8974 based devices.
Say M here if you want to include support for the regulators on the
Qualcomm RPM as a module. The module will be named
"qcom_smd-regulator".
config REGULATOR_QCOM_SPMI
tristate "Qualcomm SPMI regulator driver"
depends on SPMI || COMPILE_TEST
......
......@@ -56,12 +56,13 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o
obj-$(CONFIG_REGULATOR_MAX77843) += max77843.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
......
......@@ -530,7 +530,6 @@ MODULE_DEVICE_TABLE(i2c, act8865_ids);
static struct i2c_driver act8865_pmic_driver = {
.driver = {
.name = "act8865",
.owner = THIS_MODULE,
},
.probe = act8865_pmic_probe,
.id_table = act8865_ids,
......
......@@ -275,4 +275,3 @@ module_exit(ad5398_exit);
MODULE_DESCRIPTION("AD5398 and AD5821 current regulator driver");
MODULE_AUTHOR("Sonic Zhang");
MODULE_LICENSE("GPL");
MODULE_ALIAS("i2c:ad5398-regulator");
......@@ -405,3 +405,4 @@ module_platform_driver(axp20x_regulator_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
MODULE_DESCRIPTION("Regulator Driver for AXP20X PMIC");
MODULE_ALIAS("platform:axp20x-regulator");
......@@ -111,6 +111,11 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
const char *supply_name);
static void _regulator_put(struct regulator *regulator);
static struct regulator_dev *dev_to_rdev(struct device *dev)
{
return container_of(dev, struct regulator_dev, dev);
}
static const char *rdev_get_name(struct regulator_dev *rdev)
{
if (rdev->constraints && rdev->constraints->name)
......@@ -296,7 +301,7 @@ static int regulator_check_drms(struct regulator_dev *rdev)
return -ENODEV;
}
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) {
rdev_err(rdev, "operation not allowed\n");
rdev_dbg(rdev, "operation not allowed\n");
return -EPERM;
}
return 0;
......@@ -641,6 +646,8 @@ static int drms_uA_update(struct regulator_dev *rdev)
int current_uA = 0, output_uV, input_uV, err;
unsigned int mode;
lockdep_assert_held_once(&rdev->mutex);
/*
* first check to see if we can set modes at all, otherwise just
* tell the consumer everything is OK.
......@@ -761,6 +768,8 @@ static int suspend_set_state(struct regulator_dev *rdev,
/* locks held by caller */
static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state)
{
lockdep_assert_held_once(&rdev->mutex);
if (!rdev->constraints)
return -EINVAL;
......@@ -1082,6 +1091,15 @@ static int set_machine_constraints(struct regulator_dev *rdev,
}
}
if (rdev->constraints->over_current_protection
&& ops->set_over_current_protection) {
ret = ops->set_over_current_protection(rdev);
if (ret < 0) {
rdev_err(rdev, "failed to set over current protection\n");
goto out;
}
}
print_constraints(rdev);
return 0;
out:
......@@ -1595,9 +1613,11 @@ static void _regulator_put(struct regulator *regulator)
{
struct regulator_dev *rdev;
if (regulator == NULL || IS_ERR(regulator))
if (IS_ERR_OR_NULL(regulator))
return;
lockdep_assert_held_once(&regulator_list_mutex);
rdev = regulator->rdev;
debugfs_remove_recursive(regulator->debugfs);
......@@ -1606,14 +1626,15 @@ static void _regulator_put(struct regulator *regulator)
if (regulator->dev)
sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
mutex_lock(&rdev->mutex);
kfree(regulator->supply_name);
list_del(&regulator->list);
kfree(regulator);
rdev->open_count--;
rdev->exclusive = 0;
mutex_unlock(&rdev->mutex);
kfree(regulator->supply_name);
kfree(regulator);
module_put(rdev->owner);
}
......@@ -1976,6 +1997,8 @@ static int _regulator_enable(struct regulator_dev *rdev)
{
int ret;
lockdep_assert_held_once(&rdev->mutex);
/* check voltage and requested load before enabling */
if (rdev->constraints &&
(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS))
......@@ -2076,6 +2099,8 @@ static int _regulator_disable(struct regulator_dev *rdev)
{
int ret = 0;
lockdep_assert_held_once(&rdev->mutex);
if (WARN(rdev->use_count <= 0,
"unbalanced disables for %s\n", rdev_get_name(rdev)))
return -EIO;
......@@ -2154,6 +2179,8 @@ static int _regulator_force_disable(struct regulator_dev *rdev)
{
int ret = 0;
lockdep_assert_held_once(&rdev->mutex);
ret = _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
REGULATOR_EVENT_PRE_DISABLE, NULL);
if (ret & NOTIFY_STOP_MASK)
......@@ -2722,7 +2749,7 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
goto out;
/* If we're trying to set a range that overlaps the current voltage,
* return succesfully even though the regulator does not support
* return successfully even though the regulator does not support
* changing the voltage.
*/
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
......@@ -3450,6 +3477,8 @@ EXPORT_SYMBOL_GPL(regulator_bulk_free);
int regulator_notifier_call_chain(struct regulator_dev *rdev,
unsigned long event, void *data)
{
lockdep_assert_held_once(&rdev->mutex);
_notifier_call_chain(rdev, event, data);
return NOTIFY_DONE;
......@@ -3594,6 +3623,9 @@ static const struct attribute_group *regulator_dev_groups[] = {
static void regulator_dev_release(struct device *dev)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
kfree(rdev->constraints);
of_node_put(rdev->dev.of_node);
kfree(rdev);
}
......@@ -3824,11 +3856,9 @@ void regulator_unregister(struct regulator_dev *rdev)
WARN_ON(rdev->open_count);
unset_regulator_supplies(rdev);
list_del(&rdev->list);
kfree(rdev->constraints);
mutex_unlock(&regulator_list_mutex);
regulator_ena_gpio_free(rdev);
of_node_put(rdev->dev.of_node);
device_unregister(&rdev->dev);
mutex_unlock(&regulator_list_mutex);
}
EXPORT_SYMBOL_GPL(regulator_unregister);
......@@ -4147,13 +4177,57 @@ static int __init regulator_init(void)
/* init early to allow our consumers to complete system booting */
core_initcall(regulator_init);
static int __init regulator_init_complete(void)
static int __init regulator_late_cleanup(struct device *dev, void *data)
{
struct regulator_dev *rdev;
const struct regulator_ops *ops;
struct regulation_constraints *c;
struct regulator_dev *rdev = dev_to_rdev(dev);
const struct regulator_ops *ops = rdev->desc->ops;
struct regulation_constraints *c = rdev->constraints;
int enabled, ret;
if (c && c->always_on)
return 0;
if (c && !(c->valid_ops_mask & REGULATOR_CHANGE_STATUS))
return 0;
mutex_lock(&rdev->mutex);
if (rdev->use_count)
goto unlock;
/* If we can't read the status assume it's on. */
if (ops->is_enabled)
enabled = ops->is_enabled(rdev);
else
enabled = 1;
if (!enabled)
goto unlock;
if (have_full_constraints()) {
/* We log since this may kill the system if it goes
* wrong. */
rdev_info(rdev, "disabling\n");
ret = _regulator_do_disable(rdev);
if (ret != 0)
rdev_err(rdev, "couldn't disable: %d\n", ret);
} else {
/* The intention is that in future we will
* assume that full constraints are provided
* so warn even if we aren't going to do
* anything here.
*/
rdev_warn(rdev, "incomplete constraints, leaving on\n");
}
unlock:
mutex_unlock(&rdev->mutex);
return 0;
}
static int __init regulator_init_complete(void)
{
/*
* Since DT doesn't provide an idiomatic mechanism for
* enabling full constraints and since it's much more natural
......@@ -4163,58 +4237,13 @@ static int __init regulator_init_complete(void)
if (of_have_populated_dt())
has_full_constraints = true;
mutex_lock(&regulator_list_mutex);
/* If we have a full configuration then disable any regulators
* we have permission to change the status for and which are
* not in use or always_on. This is effectively the default
* for DT and ACPI as they have full constraints.
*/
list_for_each_entry(rdev, &regulator_list, list) {
ops = rdev->desc->ops;
c = rdev->constraints;
if (c && c->always_on)
continue;
if (c && !(c->valid_ops_mask & REGULATOR_CHANGE_STATUS))
continue;
mutex_lock(&rdev->mutex);
if (rdev->use_count)
goto unlock;
/* If we can't read the status assume it's on. */
if (ops->is_enabled)
enabled = ops->is_enabled(rdev);
else
enabled = 1;
if (!enabled)
goto unlock;
if (have_full_constraints()) {
/* We log since this may kill the system if it
* goes wrong. */
rdev_info(rdev, "disabling\n");
ret = _regulator_do_disable(rdev);
if (ret != 0)
rdev_err(rdev, "couldn't disable: %d\n", ret);
} else {
/* The intention is that in future we will
* assume that full constraints are provided
* so warn even if we aren't going to do
* anything here.
*/
rdev_warn(rdev, "incomplete constraints, leaving on\n");
}
unlock:
mutex_unlock(&rdev->mutex);
}
mutex_unlock(&regulator_list_mutex);
class_for_each_device(&regulator_class, NULL, NULL,
regulator_late_cleanup);
return 0;
}
......
......@@ -818,7 +818,6 @@ static int da9062_regulator_probe(struct platform_device *pdev)
static struct platform_driver da9062_regulator_driver = {
.driver = {
.name = "da9062-regulators",
.owner = THIS_MODULE,
},
.probe = da9062_regulator_probe,
};
......
......@@ -22,6 +22,8 @@
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
......@@ -120,6 +122,55 @@ static int da9210_get_current_limit(struct regulator_dev *rdev)
return da9210_buck_limits[sel];
}
static irqreturn_t da9210_irq_handler(int irq, void *data)
{
struct da9210 *chip = data;
unsigned int val, handled = 0;
int error, ret = IRQ_NONE;
error = regmap_read(chip->regmap, DA9210_REG_EVENT_B, &val);
if (error < 0)
goto error_i2c;
if (val & DA9210_E_OVCURR) {
regulator_notifier_call_chain(chip->rdev,
REGULATOR_EVENT_OVER_CURRENT,
NULL);
handled |= DA9210_E_OVCURR;
}
if (val & DA9210_E_NPWRGOOD) {
regulator_notifier_call_chain(chip->rdev,
REGULATOR_EVENT_UNDER_VOLTAGE,
NULL);
handled |= DA9210_E_NPWRGOOD;
}
if (val & (DA9210_E_TEMP_WARN | DA9210_E_TEMP_CRIT)) {
regulator_notifier_call_chain(chip->rdev,
REGULATOR_EVENT_OVER_TEMP, NULL);
handled |= val & (DA9210_E_TEMP_WARN | DA9210_E_TEMP_CRIT);
}
if (val & DA9210_E_VMAX) {
regulator_notifier_call_chain(chip->rdev,
REGULATOR_EVENT_REGULATION_OUT,
NULL);
handled |= DA9210_E_VMAX;
}
if (handled) {
/* Clear handled events */
error = regmap_write(chip->regmap, DA9210_REG_EVENT_B, handled);
if (error < 0)
goto error_i2c;
ret = IRQ_HANDLED;
}
return ret;
error_i2c:
dev_err(regmap_get_device(chip->regmap), "I2C error : %d\n", error);
return ret;
}
/*
* I2C driver interface functions
*/
......@@ -168,6 +219,30 @@ static int da9210_i2c_probe(struct i2c_client *i2c,
}
chip->rdev = rdev;
if (i2c->irq) {
error = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL,
da9210_irq_handler,
IRQF_TRIGGER_LOW |
IRQF_ONESHOT | IRQF_SHARED,
"da9210", chip);
if (error) {
dev_err(&i2c->dev, "Failed to request IRQ%u: %d\n",
i2c->irq, error);
return error;
}
error = regmap_update_bits(chip->regmap, DA9210_REG_MASK_B,
DA9210_M_OVCURR | DA9210_M_NPWRGOOD |
DA9210_M_TEMP_WARN |
DA9210_M_TEMP_CRIT | DA9210_M_VMAX, 0);
if (error < 0) {
dev_err(&i2c->dev, "Failed to update mask reg: %d\n",
error);
return error;
}
} else {
dev_warn(&i2c->dev, "No IRQ configured\n");
}
i2c_set_clientdata(i2c, chip);
......@@ -184,7 +259,6 @@ MODULE_DEVICE_TABLE(i2c, da9210_i2c_id);
static struct i2c_driver da9210_regulator_driver = {
.driver = {
.name = "da9210",
.owner = THIS_MODULE,
},
.probe = da9210_i2c_probe,
.id_table = da9210_i2c_id,
......
/*
* da9211-regulator.c - Regulator device driver for DA9211/DA9213
* Copyright (C) 2014 Dialog Semiconductor Ltd.
* da9211-regulator.c - Regulator device driver for DA9211/DA9213/DA9215
* Copyright (C) 2015 Dialog Semiconductor Ltd.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
......@@ -32,6 +32,7 @@
/* DEVICE IDs */
#define DA9211_DEVICE_ID 0x22
#define DA9213_DEVICE_ID 0x23
#define DA9215_DEVICE_ID 0x24
#define DA9211_BUCK_MODE_SLEEP 1
#define DA9211_BUCK_MODE_SYNC 2
......@@ -90,6 +91,13 @@ static const int da9213_current_limits[] = {
3000000, 3200000, 3400000, 3600000, 3800000, 4000000, 4200000, 4400000,
4600000, 4800000, 5000000, 5200000, 5400000, 5600000, 5800000, 6000000
};
/* Current limits for DA9215 buck (uA) indices
* corresponds with register values
*/
static const int da9215_current_limits[] = {
4000000, 4200000, 4400000, 4600000, 4800000, 5000000, 5200000, 5400000,
5600000, 5800000, 6000000, 6200000, 6400000, 6600000, 6800000, 7000000
};
static unsigned int da9211_buck_get_mode(struct regulator_dev *rdev)
{
......@@ -157,6 +165,10 @@ static int da9211_set_current_limit(struct regulator_dev *rdev, int min,
current_limits = da9213_current_limits;
max_size = ARRAY_SIZE(da9213_current_limits)-1;
break;
case DA9215:
current_limits = da9215_current_limits;
max_size = ARRAY_SIZE(da9215_current_limits)-1;
break;
default:
return -EINVAL;
}
......@@ -189,6 +201,9 @@ static int da9211_get_current_limit(struct regulator_dev *rdev)
case DA9213:
current_limits = da9213_current_limits;
break;
case DA9215:
current_limits = da9215_current_limits;
break;
default:
return -EINVAL;
}
......@@ -350,13 +365,11 @@ static int da9211_regulator_init(struct da9211 *chip)
/* If configuration for 1/2 bucks is different between platform data
* and the register, driver should exit.
*/
if ((chip->pdata->num_buck == 2 && data == 0x40)
|| (chip->pdata->num_buck == 1 && data == 0x00)) {
if (data == 0)
chip->num_regulator = 1;
else
chip->num_regulator = 2;
} else {
if (chip->pdata->num_buck == 1 && data == 0x00)
chip->num_regulator = 1;
else if (chip->pdata->num_buck == 2 && data != 0x00)
chip->num_regulator = 2;
else {
dev_err(chip->dev, "Configuration is mismatched\n");
return -EINVAL;
}
......@@ -438,6 +451,9 @@ static int da9211_i2c_probe(struct i2c_client *i2c,
case DA9213_DEVICE_ID:
chip->chip_id = DA9213;
break;
case DA9215_DEVICE_ID:
chip->chip_id = DA9215;
break;
default:
dev_err(chip->dev, "Unsupported device id = 0x%x.\n", data);
return -ENODEV;
......@@ -478,6 +494,7 @@ static int da9211_i2c_probe(struct i2c_client *i2c,
static const struct i2c_device_id da9211_i2c_id[] = {
{"da9211", DA9211},
{"da9213", DA9213},
{"da9215", DA9215},
{},
};
MODULE_DEVICE_TABLE(i2c, da9211_i2c_id);
......@@ -486,6 +503,7 @@ MODULE_DEVICE_TABLE(i2c, da9211_i2c_id);
static const struct of_device_id da9211_dt_ids[] = {
{ .compatible = "dlg,da9211", .data = &da9211_i2c_id[0] },
{ .compatible = "dlg,da9213", .data = &da9211_i2c_id[1] },
{ .compatible = "dlg,da9215", .data = &da9211_i2c_id[2] },
{},
};
MODULE_DEVICE_TABLE(of, da9211_dt_ids);
......@@ -494,7 +512,6 @@ MODULE_DEVICE_TABLE(of, da9211_dt_ids);
static struct i2c_driver da9211_regulator_driver = {
.driver = {
.name = "da9211",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(da9211_dt_ids),
},
.probe = da9211_i2c_probe,
......@@ -504,5 +521,5 @@ static struct i2c_driver da9211_regulator_driver = {
module_i2c_driver(da9211_regulator_driver);
MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
MODULE_DESCRIPTION("Regulator device driver for Dialog DA9211/DA9213");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Regulator device driver for Dialog DA9211/DA9213/DA9215");
MODULE_LICENSE("GPL");
/*
* da9211-regulator.h - Regulator definitions for DA9211/DA9213
* Copyright (C) 2014 Dialog Semiconductor Ltd.
* da9211-regulator.h - Regulator definitions for DA9211/DA9213/DA9215
* Copyright (C) 2015 Dialog Semiconductor Ltd.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __DA9211_REGISTERS_H__
......
......@@ -439,6 +439,7 @@ static const struct i2c_device_id fan53555_id[] = {
},
{ },
};
MODULE_DEVICE_TABLE(i2c, fan53555_id);
static struct i2c_driver fan53555_regulator_driver = {
.driver = {
......
......@@ -156,7 +156,6 @@ MODULE_DEVICE_TABLE(i2c, isl6271a_id);
static struct i2c_driver isl6271a_i2c_driver = {
.driver = {
.name = "isl6271a",
.owner = THIS_MODULE,
},
.probe = isl6271a_probe,
.id_table = isl6271a_id,
......
......@@ -183,6 +183,7 @@ static const struct of_device_id isl9305_dt_ids[] = {
{ .compatible = "isil,isl9305h" },
{},
};
MODULE_DEVICE_TABLE(of, isl9305_dt_ids);
#endif
static const struct i2c_device_id isl9305_i2c_id[] = {
......@@ -195,7 +196,6 @@ MODULE_DEVICE_TABLE(i2c, isl9305_i2c_id);
static struct i2c_driver isl9305_regulator_driver = {
.driver = {
.name = "isl9305",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(isl9305_dt_ids),
},
.probe = isl9305_i2c_probe,
......
......@@ -452,7 +452,6 @@ MODULE_DEVICE_TABLE(i2c, lp3971_i2c_id);
static struct i2c_driver lp3971_i2c_driver = {
.driver = {
.name = "LP3971",
.owner = THIS_MODULE,
},
.probe = lp3971_i2c_probe,
.id_table = lp3971_i2c_id,
......
......@@ -550,7 +550,6 @@ MODULE_DEVICE_TABLE(i2c, lp3972_i2c_id);
static struct i2c_driver lp3972_i2c_driver = {
.driver = {
.name = "lp3972",
.owner = THIS_MODULE,
},
.probe = lp3972_i2c_probe,
.id_table = lp3972_i2c_id,
......
......@@ -849,7 +849,7 @@ static struct lp872x_platform_data
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
goto out;
return ERR_PTR(-ENOMEM);
of_property_read_u8(np, "ti,general-config", &pdata->general_config);
if (of_find_property(np, "ti,update-config", NULL))
......@@ -857,7 +857,7 @@ static struct lp872x_platform_data
pdata->dvs = devm_kzalloc(dev, sizeof(struct lp872x_dvs), GFP_KERNEL);
if (!pdata->dvs)
goto out;
return ERR_PTR(-ENOMEM);
pdata->dvs->gpio = of_get_named_gpio(np, "ti,dvs-gpio", 0);
of_property_read_u8(np, "ti,dvs-vsel", (u8 *)&pdata->dvs->vsel);
......@@ -903,15 +903,21 @@ static struct lp872x_platform_data
static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
{
struct lp872x *lp;
struct lp872x_platform_data *pdata;
int ret;
const int lp872x_num_regulators[] = {
[LP8720] = LP8720_NUM_REGULATORS,
[LP8725] = LP8725_NUM_REGULATORS,
};
if (cl->dev.of_node)
cl->dev.platform_data = lp872x_populate_pdata_from_dt(&cl->dev,
if (cl->dev.of_node) {
pdata = lp872x_populate_pdata_from_dt(&cl->dev,
(enum lp872x_id)id->driver_data);
if (IS_ERR(pdata))
return PTR_ERR(pdata);
} else {
pdata = dev_get_platdata(&cl->dev);
}
lp = devm_kzalloc(&cl->dev, sizeof(struct lp872x), GFP_KERNEL);
if (!lp)
......@@ -927,7 +933,7 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
}
lp->dev = &cl->dev;
lp->pdata = dev_get_platdata(&cl->dev);
lp->pdata = pdata;
lp->chipid = id->driver_data;
i2c_set_clientdata(cl, lp);
......@@ -955,7 +961,6 @@ MODULE_DEVICE_TABLE(i2c, lp872x_ids);
static struct i2c_driver lp872x_driver = {
.driver = {
.name = "lp872x",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(lp872x_dt_ids),
},
.probe = lp872x_probe,
......
......@@ -378,7 +378,7 @@ static bool ltc3589_volatile_reg(struct device *dev, unsigned int reg)
return false;
}
static struct reg_default ltc3589_reg_defaults[] = {
static const struct reg_default ltc3589_reg_defaults[] = {
{ LTC3589_SCR1, 0x00 },
{ LTC3589_OVEN, 0x00 },
{ LTC3589_SCR2, 0x00 },
......@@ -542,7 +542,6 @@ MODULE_DEVICE_TABLE(i2c, ltc3589_i2c_id);
static struct i2c_driver ltc3589_driver = {
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
},
.probe = ltc3589_probe,
.id_table = ltc3589_i2c_id,
......@@ -552,4 +551,3 @@ module_i2c_driver(ltc3589_driver);
MODULE_AUTHOR("Philipp Zabel <p.zabel@pengutronix.de>");
MODULE_DESCRIPTION("Regulator driver for Linear Technology LTC3589(-1,2)");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("i2c:ltc3589");
......@@ -304,7 +304,6 @@ static struct i2c_driver max1586_pmic_driver = {
.probe = max1586_pmic_probe,
.driver = {
.name = "max1586",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(max1586_of_match),
},
.id_table = max1586_id,
......
/*
* max77693.c - Regulator driver for the Maxim 77693
* max77693.c - Regulator driver for the Maxim 77693 and 77843
*
* Copyright (C) 2013 Samsung Electronics
* Copyright (C) 2013-2015 Samsung Electronics
* Jonghwa Lee <jonghwa3.lee@samsung.com>
* Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -29,38 +30,64 @@
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/max77693.h>
#include <linux/mfd/max77693-common.h>
#include <linux/mfd/max77693-private.h>
#include <linux/mfd/max77843-private.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regmap.h>
#define CHGIN_ILIM_STEP_20mA 20000
/*
* ID for MAX77843 regulators.
* There is no need for such for MAX77693.
*/
enum max77843_regulator_type {
MAX77843_SAFEOUT1 = 0,
MAX77843_SAFEOUT2,
MAX77843_CHARGER,
MAX77843_NUM,
};
/* Register differences between chargers: MAX77693 and MAX77843 */
struct chg_reg_data {
unsigned int linear_reg;
unsigned int linear_mask;
unsigned int uA_step;
unsigned int min_sel;
};
/*
* CHARGER regulator - Min : 20mA, Max : 2580mA, step : 20mA
* MAX77693 CHARGER regulator - Min : 20mA, Max : 2580mA, step : 20mA
* 0x00, 0x01, 0x2, 0x03 = 60 mA
* 0x04 ~ 0x7E = (60 + (X - 3) * 20) mA
* Actually for MAX77693 the driver manipulates the maximum input current,
* not the fast charge current (output). This should be fixed.
*
* On MAX77843 the calculation formula is the same (except values).
* Fortunately it properly manipulates the fast charge current.
*/
static int max77693_chg_get_current_limit(struct regulator_dev *rdev)
{
const struct chg_reg_data *reg_data = rdev_get_drvdata(rdev);
unsigned int chg_min_uA = rdev->constraints->min_uA;
unsigned int chg_max_uA = rdev->constraints->max_uA;
unsigned int reg, sel;
unsigned int val;
int ret;
ret = regmap_read(rdev->regmap, MAX77693_CHG_REG_CHG_CNFG_09, &reg);
ret = regmap_read(rdev->regmap, reg_data->linear_reg, &reg);
if (ret < 0)
return ret;
sel = reg & CHG_CNFG_09_CHGIN_ILIM_MASK;
sel = reg & reg_data->linear_mask;
/* the first four codes for charger current are all 60mA */
if (sel <= 3)
if (sel <= reg_data->min_sel)
sel = 0;
else
sel -= 3;
sel -= reg_data->min_sel;
val = chg_min_uA + CHGIN_ILIM_STEP_20mA * sel;
val = chg_min_uA + reg_data->uA_step * sel;
if (val > chg_max_uA)
return -EINVAL;
......@@ -70,23 +97,43 @@ static int max77693_chg_get_current_limit(struct regulator_dev *rdev)
static int max77693_chg_set_current_limit(struct regulator_dev *rdev,
int min_uA, int max_uA)
{
const struct chg_reg_data *reg_data = rdev_get_drvdata(rdev);
unsigned int chg_min_uA = rdev->constraints->min_uA;
int sel = 0;
while (chg_min_uA + CHGIN_ILIM_STEP_20mA * sel < min_uA)
while (chg_min_uA + reg_data->uA_step * sel < min_uA)
sel++;
if (chg_min_uA + CHGIN_ILIM_STEP_20mA * sel > max_uA)
if (chg_min_uA + reg_data->uA_step * sel > max_uA)
return -EINVAL;
/* the first four codes for charger current are all 60mA */
sel += 3;
sel += reg_data->min_sel;
return regmap_write(rdev->regmap,
MAX77693_CHG_REG_CHG_CNFG_09, sel);
return regmap_write(rdev->regmap, reg_data->linear_reg, sel);
}
/* end of CHARGER regulator ops */
/* Returns regmap suitable for given regulator on chosen device */
static struct regmap *max77693_get_regmap(enum max77693_types type,
struct max77693_dev *max77693,
int reg_id)
{
if (type == TYPE_MAX77693)
return max77693->regmap;
/* Else: TYPE_MAX77843 */
switch (reg_id) {
case MAX77843_SAFEOUT1:
case MAX77843_SAFEOUT2:
return max77693->regmap;
case MAX77843_CHARGER:
return max77693->regmap_chg;
default:
return max77693->regmap;
}
}
static const unsigned int max77693_safeout_table[] = {
4850000,
4900000,
......@@ -111,7 +158,7 @@ static struct regulator_ops max77693_charger_ops = {
.set_current_limit = max77693_chg_set_current_limit,
};
#define regulator_desc_esafeout(_num) { \
#define max77693_regulator_desc_esafeout(_num) { \
.name = "ESAFEOUT"#_num, \
.id = MAX77693_ESAFEOUT##_num, \
.of_match = of_match_ptr("ESAFEOUT"#_num), \
......@@ -127,9 +174,9 @@ static struct regulator_ops max77693_charger_ops = {
.enable_mask = SAFEOUT_CTRL_ENSAFEOUT##_num##_MASK , \
}
static const struct regulator_desc regulators[] = {
regulator_desc_esafeout(1),
regulator_desc_esafeout(2),
static const struct regulator_desc max77693_supported_regulators[] = {
max77693_regulator_desc_esafeout(1),
max77693_regulator_desc_esafeout(2),
{
.name = "CHARGER",
.id = MAX77693_CHARGER,
......@@ -145,18 +192,86 @@ static const struct regulator_desc regulators[] = {
},
};
static const struct chg_reg_data max77693_chg_reg_data = {
.linear_reg = MAX77693_CHG_REG_CHG_CNFG_09,
.linear_mask = CHG_CNFG_09_CHGIN_ILIM_MASK,
.uA_step = 20000,
.min_sel = 3,
};
#define max77843_regulator_desc_esafeout(num) { \
.name = "SAFEOUT" # num, \
.id = MAX77843_SAFEOUT ## num, \
.ops = &max77693_safeout_ops, \
.of_match = of_match_ptr("SAFEOUT" # num), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.n_voltages = ARRAY_SIZE(max77693_safeout_table), \
.volt_table = max77693_safeout_table, \
.enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL, \
.enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT ## num, \
.vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL, \
.vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT ## num ## _MASK, \
}
static const struct regulator_desc max77843_supported_regulators[] = {
[MAX77843_SAFEOUT1] = max77843_regulator_desc_esafeout(1),
[MAX77843_SAFEOUT2] = max77843_regulator_desc_esafeout(2),
[MAX77843_CHARGER] = {
.name = "CHARGER",
.id = MAX77843_CHARGER,
.ops = &max77693_charger_ops,
.of_match = of_match_ptr("CHARGER"),
.regulators_node = of_match_ptr("regulators"),
.type = REGULATOR_CURRENT,
.owner = THIS_MODULE,
.enable_reg = MAX77843_CHG_REG_CHG_CNFG_00,
.enable_mask = MAX77843_CHG_MASK,
.enable_val = MAX77843_CHG_MASK,
},
};
static const struct chg_reg_data max77843_chg_reg_data = {
.linear_reg = MAX77843_CHG_REG_CHG_CNFG_02,
.linear_mask = MAX77843_CHG_FAST_CHG_CURRENT_MASK,
.uA_step = MAX77843_CHG_FAST_CHG_CURRENT_STEP,
.min_sel = 2,
};
static int max77693_pmic_probe(struct platform_device *pdev)
{
enum max77693_types type = platform_get_device_id(pdev)->driver_data;
struct max77693_dev *iodev = dev_get_drvdata(pdev->dev.parent);
const struct regulator_desc *regulators;
unsigned int regulators_size;
int i;
struct regulator_config config = { };
config.dev = iodev->dev;
config.regmap = iodev->regmap;
for (i = 0; i < ARRAY_SIZE(regulators); i++) {
switch (type) {
case TYPE_MAX77693:
regulators = max77693_supported_regulators;
regulators_size = ARRAY_SIZE(max77693_supported_regulators);
config.driver_data = (void *)&max77693_chg_reg_data;
break;
case TYPE_MAX77843:
regulators = max77843_supported_regulators;
regulators_size = ARRAY_SIZE(max77843_supported_regulators);
config.driver_data = (void *)&max77843_chg_reg_data;
break;
default:
dev_err(&pdev->dev, "Unsupported device type: %u\n", type);
return -ENODEV;
}
for (i = 0; i < regulators_size; i++) {
struct regulator_dev *rdev;
config.regmap = max77693_get_regmap(type, iodev,
regulators[i].id);
rdev = devm_regulator_register(&pdev->dev,
&regulators[i], &config);
if (IS_ERR(rdev)) {
......@@ -170,7 +285,8 @@ static int max77693_pmic_probe(struct platform_device *pdev)
}
static const struct platform_device_id max77693_pmic_id[] = {
{"max77693-pmic", 0},
{ "max77693-pmic", TYPE_MAX77693 },
{ "max77843-regulator", TYPE_MAX77843 },
{},
};
......@@ -184,8 +300,19 @@ static struct platform_driver max77693_pmic_driver = {
.id_table = max77693_pmic_id,
};
module_platform_driver(max77693_pmic_driver);
static int __init max77693_pmic_init(void)
{
return platform_driver_register(&max77693_pmic_driver);
}
subsys_initcall(max77693_pmic_init);
static void __exit max77693_pmic_cleanup(void)
{
platform_driver_unregister(&max77693_pmic_driver);
}
module_exit(max77693_pmic_cleanup);
MODULE_DESCRIPTION("MAXIM MAX77693 regulator driver");
MODULE_DESCRIPTION("MAXIM 77693/77843 regulator driver");
MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@samsung.com>");
MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski.k@gmail.com>");
MODULE_LICENSE("GPL");
/*
* max77843.c - Regulator driver for the Maxim MAX77843
*
* Copyright (C) 2015 Samsung Electronics
* Author: Jaewon Kim <jaewon02.kim@samsung.com>
* Author: Beomho Seo <beomho.seo@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/max77843-private.h>
#include <linux/regulator/of_regulator.h>
enum max77843_regulator_type {
MAX77843_SAFEOUT1 = 0,
MAX77843_SAFEOUT2,
MAX77843_CHARGER,
MAX77843_NUM,
};
static const unsigned int max77843_safeout_voltage_table[] = {
4850000,
4900000,
4950000,
3300000,
};
static int max77843_reg_get_current_limit(struct regulator_dev *rdev)
{
struct regmap *regmap = rdev->regmap;
unsigned int chg_min_uA = rdev->constraints->min_uA;
unsigned int chg_max_uA = rdev->constraints->max_uA;
unsigned int val;
int ret;
unsigned int reg, sel;
ret = regmap_read(regmap, MAX77843_CHG_REG_CHG_CNFG_02, &reg);
if (ret) {
dev_err(&rdev->dev, "Failed to read charger register\n");
return ret;
}
sel = reg & MAX77843_CHG_FAST_CHG_CURRENT_MASK;
if (sel < 0x03)
sel = 0;
else
sel -= 2;
val = chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel;
if (val > chg_max_uA)
return -EINVAL;
return val;
}
static int max77843_reg_set_current_limit(struct regulator_dev *rdev,
int min_uA, int max_uA)
{
struct regmap *regmap = rdev->regmap;
unsigned int chg_min_uA = rdev->constraints->min_uA;
int sel = 0;
while (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel < min_uA)
sel++;
if (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel > max_uA)
return -EINVAL;
sel += 2;
return regmap_write(regmap, MAX77843_CHG_REG_CHG_CNFG_02, sel);
}
static struct regulator_ops max77843_charger_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_current_limit = max77843_reg_get_current_limit,
.set_current_limit = max77843_reg_set_current_limit,
};
static struct regulator_ops max77843_regulator_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.list_voltage = regulator_list_voltage_table,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
};
#define MAX77843_SAFEOUT(num) { \
.name = "SAFEOUT" # num, \
.id = MAX77843_SAFEOUT ## num, \
.ops = &max77843_regulator_ops, \
.of_match = of_match_ptr("SAFEOUT" # num), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.n_voltages = ARRAY_SIZE(max77843_safeout_voltage_table), \
.volt_table = max77843_safeout_voltage_table, \
.enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL, \
.enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT ## num, \
.vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL, \
.vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT ## num ## _MASK, \
}
static const struct regulator_desc max77843_supported_regulators[] = {
[MAX77843_SAFEOUT1] = MAX77843_SAFEOUT(1),
[MAX77843_SAFEOUT2] = MAX77843_SAFEOUT(2),
[MAX77843_CHARGER] = {
.name = "CHARGER",
.id = MAX77843_CHARGER,
.ops = &max77843_charger_ops,
.of_match = of_match_ptr("CHARGER"),
.regulators_node = of_match_ptr("regulators"),
.type = REGULATOR_CURRENT,
.owner = THIS_MODULE,
.enable_reg = MAX77843_CHG_REG_CHG_CNFG_00,
.enable_mask = MAX77843_CHG_MASK | MAX77843_CHG_BUCK_MASK,
.enable_val = MAX77843_CHG_MASK | MAX77843_CHG_BUCK_MASK,
},
};
static struct regmap *max77843_get_regmap(struct max77843 *max77843, int reg_id)
{
switch (reg_id) {
case MAX77843_SAFEOUT1:
case MAX77843_SAFEOUT2:
return max77843->regmap;
case MAX77843_CHARGER:
return max77843->regmap_chg;
default:
return max77843->regmap;
}
}
static int max77843_regulator_probe(struct platform_device *pdev)
{
struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
struct regulator_config config = {};
int i;
config.dev = max77843->dev;
config.driver_data = max77843;
for (i = 0; i < ARRAY_SIZE(max77843_supported_regulators); i++) {
struct regulator_dev *regulator;
config.regmap = max77843_get_regmap(max77843,
max77843_supported_regulators[i].id);
regulator = devm_regulator_register(&pdev->dev,
&max77843_supported_regulators[i], &config);
if (IS_ERR(regulator)) {
dev_err(&pdev->dev,
"Failed to regiser regulator-%d\n", i);
return PTR_ERR(regulator);
}
}
return 0;
}
static const struct platform_device_id max77843_regulator_id[] = {
{ "max77843-regulator", },
{ /* sentinel */ },
};
static struct platform_driver max77843_regulator_driver = {
.driver = {
.name = "max77843-regulator",
},
.probe = max77843_regulator_probe,
.id_table = max77843_regulator_id,
};
static int __init max77843_regulator_init(void)
{
return platform_driver_register(&max77843_regulator_driver);
}
subsys_initcall(max77843_regulator_init);
static void __exit max77843_regulator_exit(void)
{
platform_driver_unregister(&max77843_regulator_driver);
}
module_exit(max77843_regulator_exit);
MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
MODULE_DESCRIPTION("Maxim MAX77843 regulator driver");
MODULE_LICENSE("GPL");
......@@ -518,7 +518,6 @@ static struct i2c_driver max8660_driver = {
.probe = max8660_probe,
.driver = {
.name = "max8660",
.owner = THIS_MODULE,
},
.id_table = max8660_id,
};
......
......@@ -75,6 +75,7 @@
#define MAX8973_DISCH_ENBABLE BIT(5)
#define MAX8973_FT_ENABLE BIT(4)
#define MAX8973_CKKADV_TRIP_MASK 0xC
#define MAX8973_CKKADV_TRIP_DISABLE 0xC
#define MAX8973_CKKADV_TRIP_75mV_PER_US 0x0
#define MAX8973_CKKADV_TRIP_150mV_PER_US 0x4
......@@ -282,6 +283,55 @@ static int max8973_set_ramp_delay(struct regulator_dev *rdev,
return ret;
}
static int max8973_set_current_limit(struct regulator_dev *rdev,
int min_ua, int max_ua)
{
struct max8973_chip *max = rdev_get_drvdata(rdev);
unsigned int val;
int ret;
if (max_ua <= 9000000)
val = MAX8973_CKKADV_TRIP_75mV_PER_US;
else if (max_ua <= 12000000)
val = MAX8973_CKKADV_TRIP_150mV_PER_US;
else
val = MAX8973_CKKADV_TRIP_DISABLE;
ret = regmap_update_bits(max->regmap, MAX8973_CONTROL2,
MAX8973_CKKADV_TRIP_MASK, val);
if (ret < 0) {
dev_err(max->dev, "register %d update failed: %d\n",
MAX8973_CONTROL2, ret);
return ret;
}
return 0;
}
static int max8973_get_current_limit(struct regulator_dev *rdev)
{
struct max8973_chip *max = rdev_get_drvdata(rdev);
unsigned int control2;
int ret;
ret = regmap_read(max->regmap, MAX8973_CONTROL2, &control2);
if (ret < 0) {
dev_err(max->dev, "register %d read failed: %d\n",
MAX8973_CONTROL2, ret);
return ret;
}
switch (control2 & MAX8973_CKKADV_TRIP_MASK) {
case MAX8973_CKKADV_TRIP_DISABLE:
return 15000000;
case MAX8973_CKKADV_TRIP_150mV_PER_US:
return 12000000;
case MAX8973_CKKADV_TRIP_75mV_PER_US:
return 9000000;
default:
break;
}
return 9000000;
}
static const struct regulator_ops max8973_dcdc_ops = {
.get_voltage_sel = max8973_dcdc_get_voltage_sel,
.set_voltage_sel = max8973_dcdc_set_voltage_sel,
......@@ -421,6 +471,8 @@ static struct max8973_regulator_platform_data *max8973_parse_dt(
struct device_node *np = dev->of_node;
int ret;
u32 pval;
bool etr_enable;
bool etr_sensitivity_high;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
......@@ -452,6 +504,23 @@ static struct max8973_regulator_platform_data *max8973_parse_dt(
if (of_property_read_bool(np, "maxim,enable-bias-control"))
pdata->control_flags |= MAX8973_CONTROL_BIAS_ENABLE;
etr_enable = of_property_read_bool(np, "maxim,enable-etr");
etr_sensitivity_high = of_property_read_bool(np,
"maxim,enable-high-etr-sensitivity");
if (etr_sensitivity_high)
etr_enable = true;
if (etr_enable) {
if (etr_sensitivity_high)
pdata->control_flags |=
MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US;
else
pdata->control_flags |=
MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US;
} else {
pdata->control_flags |= MAX8973_CONTROL_CLKADV_TRIP_DISABLED;
}
return pdata;
}
......@@ -568,6 +637,15 @@ static int max8973_probe(struct i2c_client *client,
max->lru_index[i] = i;
max->lru_index[0] = max->curr_vout_reg;
max->lru_index[max->curr_vout_reg] = 0;
} else {
/*
* If there is no DVS GPIO, the VOUT register
* address is fixed.
*/
max->ops.set_voltage_sel = regulator_set_voltage_sel_regmap;
max->ops.get_voltage_sel = regulator_get_voltage_sel_regmap;
max->desc.vsel_reg = max->curr_vout_reg;
max->desc.vsel_mask = MAX8973_VOUT_MASK;
}
if (pdata_from_dt)
......@@ -613,6 +691,8 @@ static int max8973_probe(struct i2c_client *client,
max->ops.enable = regulator_enable_regmap;
max->ops.disable = regulator_disable_regmap;
max->ops.is_enabled = regulator_is_enabled_regmap;
max->ops.set_current_limit = max8973_set_current_limit;
max->ops.get_current_limit = max8973_get_current_limit;
break;
default:
break;
......@@ -652,7 +732,6 @@ static struct i2c_driver max8973_i2c_driver = {
.driver = {
.name = "max8973",
.of_match_table = of_max8973_match_tbl,
.owner = THIS_MODULE,
},
.probe = max8973_probe,
.id_table = max8973_id,
......
/*
* Copyright (c) 2015 MediaTek Inc.
* Author: Henry Chen <henryc.chen@mediatek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/mt6311.h>
#include <linux/slab.h>
#include "mt6311-regulator.h"
static const struct regmap_config mt6311_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = MT6311_FQMTR_CON4,
};
/* Default limits measured in millivolts and milliamps */
#define MT6311_MIN_UV 600000
#define MT6311_MAX_UV 1393750
#define MT6311_STEP_UV 6250
static const struct regulator_linear_range buck_volt_range[] = {
REGULATOR_LINEAR_RANGE(MT6311_MIN_UV, 0, 0x7f, MT6311_STEP_UV),
};
static const struct regulator_ops mt6311_buck_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
static const struct regulator_ops mt6311_ldo_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
#define MT6311_BUCK(_id) \
{\
.name = #_id,\
.ops = &mt6311_buck_ops,\
.of_match = of_match_ptr(#_id),\
.regulators_node = of_match_ptr("regulators"),\
.type = REGULATOR_VOLTAGE,\
.id = MT6311_ID_##_id,\
.n_voltages = (MT6311_MAX_UV - MT6311_MIN_UV) / MT6311_STEP_UV + 1,\
.min_uV = MT6311_MIN_UV,\
.uV_step = MT6311_STEP_UV,\
.owner = THIS_MODULE,\
.linear_ranges = buck_volt_range, \
.n_linear_ranges = ARRAY_SIZE(buck_volt_range), \
.enable_reg = MT6311_VDVFS11_CON9,\
.enable_mask = MT6311_PMIC_VDVFS11_EN_MASK,\
.vsel_reg = MT6311_VDVFS11_CON12,\
.vsel_mask = MT6311_PMIC_VDVFS11_VOSEL_MASK,\
}
#define MT6311_LDO(_id) \
{\
.name = #_id,\
.ops = &mt6311_ldo_ops,\
.of_match = of_match_ptr(#_id),\
.regulators_node = of_match_ptr("regulators"),\
.type = REGULATOR_VOLTAGE,\
.id = MT6311_ID_##_id,\
.owner = THIS_MODULE,\
.enable_reg = MT6311_LDO_CON3,\
.enable_mask = MT6311_PMIC_RG_VBIASN_EN_MASK,\
}
static const struct regulator_desc mt6311_regulators[] = {
MT6311_BUCK(VDVFS),
MT6311_LDO(VBIASN),
};
/*
* I2C driver interface functions
*/
static int mt6311_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct regulator_config config = { };
struct regulator_dev *rdev;
struct regmap *regmap;
int i, ret;
unsigned int data;
regmap = devm_regmap_init_i2c(i2c, &mt6311_regmap_config);
if (IS_ERR(regmap)) {
ret = PTR_ERR(regmap);
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
ret);
return ret;
}
ret = regmap_read(regmap, MT6311_SWCID, &data);
if (ret < 0) {
dev_err(&i2c->dev, "Failed to read DEVICE_ID reg: %d\n", ret);
return ret;
}
switch (data) {
case MT6311_E1_CID_CODE:
case MT6311_E2_CID_CODE:
case MT6311_E3_CID_CODE:
break;
default:
dev_err(&i2c->dev, "Unsupported device id = 0x%x.\n", data);
return -ENODEV;
}
for (i = 0; i < MT6311_MAX_REGULATORS; i++) {
config.dev = &i2c->dev;
config.regmap = regmap;
rdev = devm_regulator_register(&i2c->dev,
&mt6311_regulators[i], &config);
if (IS_ERR(rdev)) {
dev_err(&i2c->dev,
"Failed to register MT6311 regulator\n");
return PTR_ERR(rdev);
}
}
return 0;
}
static const struct i2c_device_id mt6311_i2c_id[] = {
{"mt6311", 0},
{},
};
MODULE_DEVICE_TABLE(i2c, mt6311_i2c_id);
#ifdef CONFIG_OF
static const struct of_device_id mt6311_dt_ids[] = {
{ .compatible = "mediatek,mt6311-regulator",
.data = &mt6311_i2c_id[0] },
{},
};
MODULE_DEVICE_TABLE(of, mt6311_dt_ids);
#endif
static struct i2c_driver mt6311_regulator_driver = {
.driver = {
.name = "mt6311",
.of_match_table = of_match_ptr(mt6311_dt_ids),
},
.probe = mt6311_i2c_probe,
.id_table = mt6311_i2c_id,
};
module_i2c_driver(mt6311_regulator_driver);
MODULE_AUTHOR("Henry Chen <henryc.chen@mediatek.com>");
MODULE_DESCRIPTION("Regulator device driver for Mediatek MT6311");
MODULE_LICENSE("GPL v2");
/*
* Copyright (c) 2015 MediaTek Inc.
* Author: Henry Chen <henryc.chen@mediatek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MT6311_REGULATOR_H__
#define __MT6311_REGULATOR_H__
#define MT6311_SWCID 0x01
#define MT6311_TOP_INT_CON 0x18
#define MT6311_TOP_INT_MON 0x19
#define MT6311_VDVFS11_CON0 0x87
#define MT6311_VDVFS11_CON7 0x88
#define MT6311_VDVFS11_CON8 0x89
#define MT6311_VDVFS11_CON9 0x8A
#define MT6311_VDVFS11_CON10 0x8B
#define MT6311_VDVFS11_CON11 0x8C
#define MT6311_VDVFS11_CON12 0x8D
#define MT6311_VDVFS11_CON13 0x8E
#define MT6311_VDVFS11_CON14 0x8F
#define MT6311_VDVFS11_CON15 0x90
#define MT6311_VDVFS11_CON16 0x91
#define MT6311_VDVFS11_CON17 0x92
#define MT6311_VDVFS11_CON18 0x93
#define MT6311_VDVFS11_CON19 0x94
#define MT6311_LDO_CON0 0xCC
#define MT6311_LDO_OCFB0 0xCD
#define MT6311_LDO_CON2 0xCE
#define MT6311_LDO_CON3 0xCF
#define MT6311_LDO_CON4 0xD0
#define MT6311_FQMTR_CON0 0xD1
#define MT6311_FQMTR_CON1 0xD2
#define MT6311_FQMTR_CON2 0xD3
#define MT6311_FQMTR_CON3 0xD4
#define MT6311_FQMTR_CON4 0xD5
#define MT6311_PMIC_RG_INT_POL_MASK 0x1
#define MT6311_PMIC_RG_INT_EN_MASK 0x2
#define MT6311_PMIC_RG_BUCK_OC_INT_STATUS_MASK 0x10
#define MT6311_PMIC_VDVFS11_EN_CTRL_MASK 0x1
#define MT6311_PMIC_VDVFS11_VOSEL_CTRL_MASK 0x2
#define MT6311_PMIC_VDVFS11_EN_SEL_MASK 0x3
#define MT6311_PMIC_VDVFS11_VOSEL_SEL_MASK 0xc
#define MT6311_PMIC_VDVFS11_EN_MASK 0x1
#define MT6311_PMIC_VDVFS11_VOSEL_MASK 0x7F
#define MT6311_PMIC_VDVFS11_VOSEL_ON_MASK 0x7F
#define MT6311_PMIC_VDVFS11_VOSEL_SLEEP_MASK 0x7F
#define MT6311_PMIC_NI_VDVFS11_VOSEL_MASK 0x7F
#define MT6311_PMIC_RG_VBIASN_EN_MASK 0x1
#endif
......@@ -107,6 +107,9 @@ static void of_get_regulation_constraints(struct device_node *np,
if (!of_property_read_u32(np, "regulator-system-load", &pval))
constraints->system_load = pval;
constraints->over_current_protection = of_property_read_bool(np,
"regulator-over-current-protection");
for (i = 0; i < ARRAY_SIZE(regulator_states); i++) {
switch (i) {
case PM_SUSPEND_MEM:
......
......@@ -30,6 +30,7 @@
struct pbias_reg_info {
u32 enable;
u32 enable_mask;
u32 disable_val;
u32 vmode;
unsigned int enable_time;
char *name;
......@@ -62,6 +63,7 @@ static const struct pbias_reg_info pbias_mmc_omap2430 = {
.enable = BIT(1),
.enable_mask = BIT(1),
.vmode = BIT(0),
.disable_val = 0,
.enable_time = 100,
.name = "pbias_mmc_omap2430"
};
......@@ -77,6 +79,7 @@ static const struct pbias_reg_info pbias_sim_omap3 = {
static const struct pbias_reg_info pbias_mmc_omap4 = {
.enable = BIT(26) | BIT(22),
.enable_mask = BIT(26) | BIT(25) | BIT(22),
.disable_val = BIT(25),
.vmode = BIT(21),
.enable_time = 100,
.name = "pbias_mmc_omap4"
......@@ -85,6 +88,7 @@ static const struct pbias_reg_info pbias_mmc_omap4 = {
static const struct pbias_reg_info pbias_mmc_omap5 = {
.enable = BIT(27) | BIT(26),
.enable_mask = BIT(27) | BIT(25) | BIT(26),
.disable_val = BIT(25),
.vmode = BIT(21),
.enable_time = 100,
.name = "pbias_mmc_omap5"
......@@ -159,6 +163,7 @@ static int pbias_regulator_probe(struct platform_device *pdev)
drvdata[data_idx].desc.enable_reg = res->start;
drvdata[data_idx].desc.enable_mask = info->enable_mask;
drvdata[data_idx].desc.enable_val = info->enable;
drvdata[data_idx].desc.disable_val = info->disable_val;
cfg.init_data = pbias_matches[idx].init_data;
cfg.driver_data = &drvdata[data_idx];
......
......@@ -643,7 +643,6 @@ static struct i2c_driver pfuze_driver = {
.id_table = pfuze_device_id,
.driver = {
.name = "pfuze100-regulator",
.owner = THIS_MODULE,
.of_match_table = pfuze_dt_ids,
},
.probe = pfuze100_regulator_probe,
......@@ -653,4 +652,3 @@ module_i2c_driver(pfuze_driver);
MODULE_AUTHOR("Robin Gong <b38343@freescale.com>");
MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/PFUZE200 PMIC");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("i2c:pfuze100-regulator");
......@@ -10,6 +10,7 @@
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
......@@ -21,9 +22,15 @@
#include <linux/pwm.h>
struct pwm_regulator_data {
struct pwm_voltages *duty_cycle_table;
/* Shared */
struct pwm_device *pwm;
/* Voltage table */
struct pwm_voltages *duty_cycle_table;
int state;
/* Continuous voltage */
int volt_uV;
};
struct pwm_voltages {
......@@ -31,6 +38,9 @@ struct pwm_voltages {
unsigned int dutycycle;
};
/**
* Voltage table call-backs
*/
static int pwm_regulator_get_voltage_sel(struct regulator_dev *rdev)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
......@@ -79,29 +89,129 @@ static int pwm_regulator_list_voltage(struct regulator_dev *rdev,
return drvdata->duty_cycle_table[selector].uV;
}
static struct regulator_ops pwm_regulator_voltage_ops = {
/**
* Continuous voltage call-backs
*/
static int pwm_voltage_to_duty_cycle_percentage(struct regulator_dev *rdev, int req_uV)
{
int min_uV = rdev->constraints->min_uV;
int max_uV = rdev->constraints->max_uV;
int diff = max_uV - min_uV;
return 100 - (((req_uV * 100) - (min_uV * 100)) / diff);
}
static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
return drvdata->volt_uV;
}
static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV,
unsigned *selector)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
unsigned int ramp_delay = rdev->constraints->ramp_delay;
unsigned int period = pwm_get_period(drvdata->pwm);
int duty_cycle;
int ret;
duty_cycle = pwm_voltage_to_duty_cycle_percentage(rdev, min_uV);
ret = pwm_config(drvdata->pwm, (period / 100) * duty_cycle, period);
if (ret) {
dev_err(&rdev->dev, "Failed to configure PWM\n");
return ret;
}
ret = pwm_enable(drvdata->pwm);
if (ret) {
dev_err(&rdev->dev, "Failed to enable PWM\n");
return ret;
}
drvdata->volt_uV = min_uV;
/* Delay required by PWM regulator to settle to the new voltage */
usleep_range(ramp_delay, ramp_delay + 1000);
return 0;
}
static struct regulator_ops pwm_regulator_voltage_table_ops = {
.set_voltage_sel = pwm_regulator_set_voltage_sel,
.get_voltage_sel = pwm_regulator_get_voltage_sel,
.list_voltage = pwm_regulator_list_voltage,
.map_voltage = regulator_map_voltage_iterate,
};
static struct regulator_ops pwm_regulator_voltage_continuous_ops = {
.get_voltage = pwm_regulator_get_voltage,
.set_voltage = pwm_regulator_set_voltage,
};
static struct regulator_desc pwm_regulator_desc = {
.name = "pwm-regulator",
.ops = &pwm_regulator_voltage_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.supply_name = "pwm",
};
static int pwm_regulator_init_table(struct platform_device *pdev,
struct pwm_regulator_data *drvdata)
{
struct device_node *np = pdev->dev.of_node;
struct pwm_voltages *duty_cycle_table;
unsigned int length = 0;
int ret;
of_find_property(np, "voltage-table", &length);
if ((length < sizeof(*duty_cycle_table)) ||
(length % sizeof(*duty_cycle_table))) {
dev_err(&pdev->dev,
"voltage-table length(%d) is invalid\n",
length);
return -EINVAL;
}
duty_cycle_table = devm_kzalloc(&pdev->dev, length, GFP_KERNEL);
if (!duty_cycle_table)
return -ENOMEM;
ret = of_property_read_u32_array(np, "voltage-table",
(u32 *)duty_cycle_table,
length / sizeof(u32));
if (ret) {
dev_err(&pdev->dev, "Failed to read voltage-table\n");
return ret;
}
drvdata->duty_cycle_table = duty_cycle_table;
pwm_regulator_desc.ops = &pwm_regulator_voltage_table_ops;
pwm_regulator_desc.n_voltages = length / sizeof(*duty_cycle_table);
return 0;
}
static int pwm_regulator_init_continuous(struct platform_device *pdev,
struct pwm_regulator_data *drvdata)
{
pwm_regulator_desc.ops = &pwm_regulator_voltage_continuous_ops;
pwm_regulator_desc.continuous_voltage_range = true;
return 0;
}
static int pwm_regulator_probe(struct platform_device *pdev)
{
const struct regulator_init_data *init_data;
struct pwm_regulator_data *drvdata;
struct property *prop;
struct regulator_dev *regulator;
struct regulator_config config = { };
struct device_node *np = pdev->dev.of_node;
int length, ret;
int ret;
if (!np) {
dev_err(&pdev->dev, "Device Tree node missing\n");
......@@ -112,44 +222,22 @@ static int pwm_regulator_probe(struct platform_device *pdev)
if (!drvdata)
return -ENOMEM;
/* determine the number of voltage-table */
prop = of_find_property(np, "voltage-table", &length);
if (!prop) {
dev_err(&pdev->dev, "No voltage-table\n");
return -EINVAL;
}
if ((length < sizeof(*drvdata->duty_cycle_table)) ||
(length % sizeof(*drvdata->duty_cycle_table))) {
dev_err(&pdev->dev, "voltage-table length(%d) is invalid\n",
length);
return -EINVAL;
}
pwm_regulator_desc.n_voltages = length / sizeof(*drvdata->duty_cycle_table);
drvdata->duty_cycle_table = devm_kzalloc(&pdev->dev,
length, GFP_KERNEL);
if (!drvdata->duty_cycle_table)
return -ENOMEM;
/* read voltage table from DT property */
ret = of_property_read_u32_array(np, "voltage-table",
(u32 *)drvdata->duty_cycle_table,
length / sizeof(u32));
if (ret < 0) {
dev_err(&pdev->dev, "read voltage-table failed\n");
if (of_find_property(np, "voltage-table", NULL))
ret = pwm_regulator_init_table(pdev, drvdata);
else
ret = pwm_regulator_init_continuous(pdev, drvdata);
if (ret)
return ret;
}
config.init_data = of_get_regulator_init_data(&pdev->dev, np,
&pwm_regulator_desc);
if (!config.init_data)
init_data = of_get_regulator_init_data(&pdev->dev, np,
&pwm_regulator_desc);
if (!init_data)
return -ENOMEM;
config.of_node = np;
config.dev = &pdev->dev;
config.driver_data = drvdata;
config.init_data = init_data;
drvdata->pwm = devm_pwm_get(&pdev->dev, NULL);
if (IS_ERR(drvdata->pwm)) {
......
/*
* Copyright (c) 2015, Sony Mobile Communications AB.
* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/soc/qcom/smd-rpm.h>
struct qcom_rpm_reg {
struct device *dev;
struct qcom_smd_rpm *rpm;
u32 type;
u32 id;
struct regulator_desc desc;
int is_enabled;
int uV;
};
struct rpm_regulator_req {
u32 key;
u32 nbytes;
u32 value;
};
#define RPM_KEY_SWEN 0x6e657773 /* "swen" */
#define RPM_KEY_UV 0x00007675 /* "uv" */
#define RPM_KEY_MA 0x0000616d /* "ma" */
static int rpm_reg_write_active(struct qcom_rpm_reg *vreg,
struct rpm_regulator_req *req,
size_t size)
{
return qcom_rpm_smd_write(vreg->rpm,
QCOM_SMD_RPM_ACTIVE_STATE,
vreg->type,
vreg->id,
req, size);
}
static int rpm_reg_enable(struct regulator_dev *rdev)
{
struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
struct rpm_regulator_req req;
int ret;
req.key = RPM_KEY_SWEN;
req.nbytes = sizeof(u32);
req.value = 1;
ret = rpm_reg_write_active(vreg, &req, sizeof(req));
if (!ret)
vreg->is_enabled = 1;
return ret;
}
static int rpm_reg_is_enabled(struct regulator_dev *rdev)
{
struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
return vreg->is_enabled;
}
static int rpm_reg_disable(struct regulator_dev *rdev)
{
struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
struct rpm_regulator_req req;
int ret;
req.key = RPM_KEY_SWEN;
req.nbytes = sizeof(u32);
req.value = 0;
ret = rpm_reg_write_active(vreg, &req, sizeof(req));
if (!ret)
vreg->is_enabled = 0;
return ret;
}
static int rpm_reg_get_voltage(struct regulator_dev *rdev)
{
struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
return vreg->uV;
}
static int rpm_reg_set_voltage(struct regulator_dev *rdev,
int min_uV,
int max_uV,
unsigned *selector)
{
struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
struct rpm_regulator_req req;
int ret = 0;
req.key = RPM_KEY_UV;
req.nbytes = sizeof(u32);
req.value = min_uV;
ret = rpm_reg_write_active(vreg, &req, sizeof(req));
if (!ret)
vreg->uV = min_uV;
return ret;
}
static int rpm_reg_set_load(struct regulator_dev *rdev, int load_uA)
{
struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
struct rpm_regulator_req req;
req.key = RPM_KEY_MA;
req.nbytes = sizeof(u32);
req.value = load_uA;
return rpm_reg_write_active(vreg, &req, sizeof(req));
}
static const struct regulator_ops rpm_smps_ldo_ops = {
.enable = rpm_reg_enable,
.disable = rpm_reg_disable,
.is_enabled = rpm_reg_is_enabled,
.get_voltage = rpm_reg_get_voltage,
.set_voltage = rpm_reg_set_voltage,
.set_load = rpm_reg_set_load,
};
static const struct regulator_ops rpm_switch_ops = {
.enable = rpm_reg_enable,
.disable = rpm_reg_disable,
.is_enabled = rpm_reg_is_enabled,
};
static const struct regulator_desc pm8x41_hfsmps = {
.linear_ranges = (struct regulator_linear_range[]) {
REGULATOR_LINEAR_RANGE( 375000, 0, 95, 12500),
REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000),
},
.n_linear_ranges = 2,
.n_voltages = 159,
.ops = &rpm_smps_ldo_ops,
};
static const struct regulator_desc pm8841_ftsmps = {
.linear_ranges = (struct regulator_linear_range[]) {
REGULATOR_LINEAR_RANGE(350000, 0, 184, 5000),
REGULATOR_LINEAR_RANGE(700000, 185, 339, 10000),
},
.n_linear_ranges = 2,
.n_voltages = 340,
.ops = &rpm_smps_ldo_ops,
};
static const struct regulator_desc pm8941_boost = {
.linear_ranges = (struct regulator_linear_range[]) {
REGULATOR_LINEAR_RANGE(4000000, 0, 15, 100000),
},
.n_linear_ranges = 1,
.n_voltages = 16,
.ops = &rpm_smps_ldo_ops,
};
static const struct regulator_desc pm8941_pldo = {
.linear_ranges = (struct regulator_linear_range[]) {
REGULATOR_LINEAR_RANGE( 750000, 0, 30, 25000),
REGULATOR_LINEAR_RANGE(1500000, 31, 99, 50000),
},
.n_linear_ranges = 2,
.n_voltages = 100,
.ops = &rpm_smps_ldo_ops,
};
static const struct regulator_desc pm8941_nldo = {
.linear_ranges = (struct regulator_linear_range[]) {
REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500),
},
.n_linear_ranges = 1,
.n_voltages = 64,
.ops = &rpm_smps_ldo_ops,
};
static const struct regulator_desc pm8941_lnldo = {
.fixed_uV = 1740000,
.n_voltages = 1,
.ops = &rpm_smps_ldo_ops,
};
static const struct regulator_desc pm8941_switch = {
.ops = &rpm_switch_ops,
};
struct rpm_regulator_data {
const char *name;
u32 type;
u32 id;
const struct regulator_desc *desc;
const char *supply;
};
static const struct rpm_regulator_data rpm_pm8841_regulators[] = {
{ "s1", QCOM_SMD_RPM_SMPB, 1, &pm8x41_hfsmps, "vdd_s1" },
{ "s2", QCOM_SMD_RPM_SMPB, 2, &pm8841_ftsmps, "vdd_s2" },
{ "s3", QCOM_SMD_RPM_SMPB, 3, &pm8x41_hfsmps, "vdd_s3" },
{ "s4", QCOM_SMD_RPM_SMPB, 4, &pm8841_ftsmps, "vdd_s4" },
{ "s5", QCOM_SMD_RPM_SMPB, 5, &pm8841_ftsmps, "vdd_s5" },
{ "s6", QCOM_SMD_RPM_SMPB, 6, &pm8841_ftsmps, "vdd_s6" },
{ "s7", QCOM_SMD_RPM_SMPB, 7, &pm8841_ftsmps, "vdd_s7" },
{ "s8", QCOM_SMD_RPM_SMPB, 8, &pm8841_ftsmps, "vdd_s8" },
{}
};
static const struct rpm_regulator_data rpm_pm8941_regulators[] = {
{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8x41_hfsmps, "vdd_s1" },
{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8x41_hfsmps, "vdd_s2" },
{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm8x41_hfsmps, "vdd_s3" },
{ "s4", QCOM_SMD_RPM_BOOST, 1, &pm8941_boost },
{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm8941_nldo, "vdd_l1_l3" },
{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm8941_nldo, "vdd_l2_lvs1_2_3" },
{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm8941_nldo, "vdd_l1_l3" },
{ "l4", QCOM_SMD_RPM_LDOA, 4, &pm8941_nldo, "vdd_l4_l11" },
{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm8941_lnldo, "vdd_l5_l7" },
{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm8941_pldo, "vdd_l6_l12_l14_l15" },
{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm8941_lnldo, "vdd_l5_l7" },
{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm8941_pldo, "vdd_l8_l16_l18_l19" },
{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm8941_pldo, "vdd_l9_l10_l17_l22" },
{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm8941_pldo, "vdd_l9_l10_l17_l22" },
{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm8941_nldo, "vdd_l4_l11" },
{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm8941_pldo, "vdd_l6_l12_l14_l15" },
{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm8941_pldo, "vdd_l13_l20_l23_l24" },
{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm8941_pldo, "vdd_l6_l12_l14_l15" },
{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm8941_pldo, "vdd_l6_l12_l14_l15" },
{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm8941_pldo, "vdd_l8_l16_l18_l19" },
{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm8941_pldo, "vdd_l9_l10_l17_l22" },
{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm8941_pldo, "vdd_l8_l16_l18_l19" },
{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm8941_pldo, "vdd_l8_l16_l18_l19" },
{ "l20", QCOM_SMD_RPM_LDOA, 20, &pm8941_pldo, "vdd_l13_l20_l23_l24" },
{ "l21", QCOM_SMD_RPM_LDOA, 21, &pm8941_pldo, "vdd_l21" },
{ "l22", QCOM_SMD_RPM_LDOA, 22, &pm8941_pldo, "vdd_l9_l10_l17_l22" },
{ "l23", QCOM_SMD_RPM_LDOA, 23, &pm8941_pldo, "vdd_l13_l20_l23_l24" },
{ "l24", QCOM_SMD_RPM_LDOA, 24, &pm8941_pldo, "vdd_l13_l20_l23_l24" },
{ "lvs1", QCOM_SMD_RPM_VSA, 1, &pm8941_switch, "vdd_l2_lvs1_2_3" },
{ "lvs2", QCOM_SMD_RPM_VSA, 2, &pm8941_switch, "vdd_l2_lvs1_2_3" },
{ "lvs3", QCOM_SMD_RPM_VSA, 3, &pm8941_switch, "vdd_l2_lvs1_2_3" },
{ "5vs1", QCOM_SMD_RPM_VSA, 4, &pm8941_switch, "vin_5vs" },
{ "5vs2", QCOM_SMD_RPM_VSA, 5, &pm8941_switch, "vin_5vs" },
{}
};
static const struct of_device_id rpm_of_match[] = {
{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
{ .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },
{}
};
MODULE_DEVICE_TABLE(of, rpm_of_match);
static int rpm_reg_probe(struct platform_device *pdev)
{
const struct rpm_regulator_data *reg;
const struct of_device_id *match;
struct regulator_config config = { };
struct regulator_dev *rdev;
struct qcom_rpm_reg *vreg;
struct qcom_smd_rpm *rpm;
rpm = dev_get_drvdata(pdev->dev.parent);
if (!rpm) {
dev_err(&pdev->dev, "unable to retrieve handle to rpm\n");
return -ENODEV;
}
match = of_match_device(rpm_of_match, &pdev->dev);
for (reg = match->data; reg->name; reg++) {
vreg = devm_kzalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
if (!vreg)
return -ENOMEM;
vreg->dev = &pdev->dev;
vreg->type = reg->type;
vreg->id = reg->id;
vreg->rpm = rpm;
memcpy(&vreg->desc, reg->desc, sizeof(vreg->desc));
vreg->desc.id = -1;
vreg->desc.owner = THIS_MODULE;
vreg->desc.type = REGULATOR_VOLTAGE;
vreg->desc.name = reg->name;
vreg->desc.supply_name = reg->supply;
vreg->desc.of_match = reg->name;
config.dev = &pdev->dev;
config.driver_data = vreg;
rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "failed to register %s\n", reg->name);
return PTR_ERR(rdev);
}
}
return 0;
}
static struct platform_driver rpm_reg_driver = {
.probe = rpm_reg_probe,
.driver = {
.name = "qcom_rpm_smd_regulator",
.of_match_table = rpm_of_match,
},
};
static int __init rpm_reg_init(void)
{
return platform_driver_register(&rpm_reg_driver);
}
subsys_initcall(rpm_reg_init);
static void __exit rpm_reg_exit(void)
{
platform_driver_unregister(&rpm_reg_driver);
}
module_exit(rpm_reg_exit)
MODULE_DESCRIPTION("Qualcomm RPM regulator driver");
MODULE_LICENSE("GPL v2");
......@@ -26,6 +26,70 @@
#include <linux/regmap.h>
#include <linux/list.h>
/* Pin control enable input pins. */
#define SPMI_REGULATOR_PIN_CTRL_ENABLE_NONE 0x00
#define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN0 0x01
#define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN1 0x02
#define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN2 0x04
#define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN3 0x08
#define SPMI_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT 0x10
/* Pin control high power mode input pins. */
#define SPMI_REGULATOR_PIN_CTRL_HPM_NONE 0x00
#define SPMI_REGULATOR_PIN_CTRL_HPM_EN0 0x01
#define SPMI_REGULATOR_PIN_CTRL_HPM_EN1 0x02
#define SPMI_REGULATOR_PIN_CTRL_HPM_EN2 0x04
#define SPMI_REGULATOR_PIN_CTRL_HPM_EN3 0x08
#define SPMI_REGULATOR_PIN_CTRL_HPM_SLEEP_B 0x10
#define SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT 0x20
/*
* Used with enable parameters to specify that hardware default register values
* should be left unaltered.
*/
#define SPMI_REGULATOR_USE_HW_DEFAULT 2
/* Soft start strength of a voltage switch type regulator */
enum spmi_vs_soft_start_str {
SPMI_VS_SOFT_START_STR_0P05_UA = 0,
SPMI_VS_SOFT_START_STR_0P25_UA,
SPMI_VS_SOFT_START_STR_0P55_UA,
SPMI_VS_SOFT_START_STR_0P75_UA,
SPMI_VS_SOFT_START_STR_HW_DEFAULT,
};
/**
* struct spmi_regulator_init_data - spmi-regulator initialization data
* @pin_ctrl_enable: Bit mask specifying which hardware pins should be
* used to enable the regulator, if any
* Value should be an ORing of
* SPMI_REGULATOR_PIN_CTRL_ENABLE_* constants. If
* the bit specified by
* SPMI_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT is
* set, then pin control enable hardware registers
* will not be modified.
* @pin_ctrl_hpm: Bit mask specifying which hardware pins should be
* used to force the regulator into high power
* mode, if any
* Value should be an ORing of
* SPMI_REGULATOR_PIN_CTRL_HPM_* constants. If
* the bit specified by
* SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT is
* set, then pin control mode hardware registers
* will not be modified.
* @vs_soft_start_strength: This parameter sets the soft start strength for
* voltage switch type regulators. Its value
* should be one of SPMI_VS_SOFT_START_STR_*. If
* its value is SPMI_VS_SOFT_START_STR_HW_DEFAULT,
* then the soft start strength will be left at its
* default hardware value.
*/
struct spmi_regulator_init_data {
unsigned pin_ctrl_enable;
unsigned pin_ctrl_hpm;
enum spmi_vs_soft_start_str vs_soft_start_strength;
};
/* These types correspond to unique register layouts. */
enum spmi_regulator_logical_type {
SPMI_REGULATOR_LOGICAL_TYPE_SMPS,
......@@ -458,6 +522,14 @@ static int spmi_regulator_vs_enable(struct regulator_dev *rdev)
return spmi_regulator_common_enable(rdev);
}
static int spmi_regulator_vs_ocp(struct regulator_dev *rdev)
{
struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
u8 reg = SPMI_VS_OCP_OVERRIDE;
return spmi_vreg_write(vreg, SPMI_VS_REG_OCP, &reg, 1);
}
static int spmi_regulator_common_disable(struct regulator_dev *rdev)
{
struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
......@@ -504,8 +576,7 @@ static int spmi_regulator_select_voltage(struct spmi_regulator *vreg,
* Force uV to be an allowed set point by applying a ceiling function to
* the uV value.
*/
*voltage_sel = (uV - range->min_uV + range->step_uV - 1)
/ range->step_uV;
*voltage_sel = DIV_ROUND_UP(uV - range->min_uV, range->step_uV);
uV = *voltage_sel * range->step_uV + range->min_uV;
if (uV > max_uV) {
......@@ -792,6 +863,9 @@ static unsigned int spmi_regulator_common_get_mode(struct regulator_dev *rdev)
if (reg & SPMI_COMMON_MODE_HPM_MASK)
return REGULATOR_MODE_NORMAL;
if (reg & SPMI_COMMON_MODE_AUTO_MASK)
return REGULATOR_MODE_FAST;
return REGULATOR_MODE_IDLE;
}
......@@ -799,11 +873,13 @@ static int
spmi_regulator_common_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
u8 mask = SPMI_COMMON_MODE_HPM_MASK;
u8 mask = SPMI_COMMON_MODE_HPM_MASK | SPMI_COMMON_MODE_AUTO_MASK;
u8 val = 0;
if (mode == REGULATOR_MODE_NORMAL)
val = mask;
val = SPMI_COMMON_MODE_HPM_MASK;
else if (mode == REGULATOR_MODE_FAST)
val = SPMI_COMMON_MODE_AUTO_MASK;
return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
}
......@@ -973,6 +1049,7 @@ static struct regulator_ops spmi_vs_ops = {
.is_enabled = spmi_regulator_common_is_enabled,
.set_pull_down = spmi_regulator_common_set_pull_down,
.set_soft_start = spmi_regulator_common_set_soft_start,
.set_over_current_protection = spmi_regulator_vs_ocp,
};
static struct regulator_ops spmi_boost_ops = {
......@@ -1203,10 +1280,111 @@ static int spmi_regulator_ftsmps_init_slew_rate(struct spmi_regulator *vreg)
return ret;
}
static int spmi_regulator_init_registers(struct spmi_regulator *vreg,
const struct spmi_regulator_init_data *data)
{
int ret;
enum spmi_regulator_logical_type type;
u8 ctrl_reg[8], reg, mask;
type = vreg->logical_type;
ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, ctrl_reg, 8);
if (ret)
return ret;
/* Set up enable pin control. */
if ((type == SPMI_REGULATOR_LOGICAL_TYPE_SMPS
|| type == SPMI_REGULATOR_LOGICAL_TYPE_LDO
|| type == SPMI_REGULATOR_LOGICAL_TYPE_VS)
&& !(data->pin_ctrl_enable
& SPMI_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT)) {
ctrl_reg[SPMI_COMMON_IDX_ENABLE] &=
~SPMI_COMMON_ENABLE_FOLLOW_ALL_MASK;
ctrl_reg[SPMI_COMMON_IDX_ENABLE] |=
data->pin_ctrl_enable & SPMI_COMMON_ENABLE_FOLLOW_ALL_MASK;
}
/* Set up mode pin control. */
if ((type == SPMI_REGULATOR_LOGICAL_TYPE_SMPS
|| type == SPMI_REGULATOR_LOGICAL_TYPE_LDO)
&& !(data->pin_ctrl_hpm
& SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT)) {
ctrl_reg[SPMI_COMMON_IDX_MODE] &=
~SPMI_COMMON_MODE_FOLLOW_ALL_MASK;
ctrl_reg[SPMI_COMMON_IDX_MODE] |=
data->pin_ctrl_hpm & SPMI_COMMON_MODE_FOLLOW_ALL_MASK;
}
if (type == SPMI_REGULATOR_LOGICAL_TYPE_VS
&& !(data->pin_ctrl_hpm & SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT)) {
ctrl_reg[SPMI_COMMON_IDX_MODE] &=
~SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
ctrl_reg[SPMI_COMMON_IDX_MODE] |=
data->pin_ctrl_hpm & SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
}
if ((type == SPMI_REGULATOR_LOGICAL_TYPE_ULT_LO_SMPS
|| type == SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS
|| type == SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO)
&& !(data->pin_ctrl_hpm
& SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT)) {
ctrl_reg[SPMI_COMMON_IDX_MODE] &=
~SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
ctrl_reg[SPMI_COMMON_IDX_MODE] |=
data->pin_ctrl_hpm & SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
}
/* Write back any control register values that were modified. */
ret = spmi_vreg_write(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, ctrl_reg, 8);
if (ret)
return ret;
/* Set soft start strength and over current protection for VS. */
if (type == SPMI_REGULATOR_LOGICAL_TYPE_VS) {
if (data->vs_soft_start_strength
!= SPMI_VS_SOFT_START_STR_HW_DEFAULT) {
reg = data->vs_soft_start_strength
& SPMI_VS_SOFT_START_SEL_MASK;
mask = SPMI_VS_SOFT_START_SEL_MASK;
return spmi_vreg_update_bits(vreg,
SPMI_VS_REG_SOFT_START,
reg, mask);
}
}
return 0;
}
static void spmi_regulator_get_dt_config(struct spmi_regulator *vreg,
struct device_node *node, struct spmi_regulator_init_data *data)
{
/*
* Initialize configuration parameters to use hardware default in case
* no value is specified via device tree.
*/
data->pin_ctrl_enable = SPMI_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT;
data->pin_ctrl_hpm = SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT;
data->vs_soft_start_strength = SPMI_VS_SOFT_START_STR_HW_DEFAULT;
/* These bindings are optional, so it is okay if they aren't found. */
of_property_read_u32(node, "qcom,ocp-max-retries",
&vreg->ocp_max_retries);
of_property_read_u32(node, "qcom,ocp-retry-delay",
&vreg->ocp_retry_delay_ms);
of_property_read_u32(node, "qcom,pin-ctrl-enable",
&data->pin_ctrl_enable);
of_property_read_u32(node, "qcom,pin-ctrl-hpm", &data->pin_ctrl_hpm);
of_property_read_u32(node, "qcom,vs-soft-start-strength",
&data->vs_soft_start_strength);
}
static unsigned int spmi_regulator_of_map_mode(unsigned int mode)
{
if (mode)
if (mode == 1)
return REGULATOR_MODE_NORMAL;
if (mode == 2)
return REGULATOR_MODE_FAST;
return REGULATOR_MODE_IDLE;
}
......@@ -1215,12 +1393,23 @@ static int spmi_regulator_of_parse(struct device_node *node,
const struct regulator_desc *desc,
struct regulator_config *config)
{
struct spmi_regulator_init_data data = { };
struct spmi_regulator *vreg = config->driver_data;
struct device *dev = config->dev;
int ret;
vreg->ocp_max_retries = SPMI_VS_OCP_DEFAULT_MAX_RETRIES;
vreg->ocp_retry_delay_ms = SPMI_VS_OCP_DEFAULT_RETRY_DELAY_MS;
spmi_regulator_get_dt_config(vreg, node, &data);
if (!vreg->ocp_max_retries)
vreg->ocp_max_retries = SPMI_VS_OCP_DEFAULT_MAX_RETRIES;
if (!vreg->ocp_retry_delay_ms)
vreg->ocp_retry_delay_ms = SPMI_VS_OCP_DEFAULT_RETRY_DELAY_MS;
ret = spmi_regulator_init_registers(vreg, &data);
if (ret) {
dev_err(dev, "common initialization failed, ret=%d\n", ret);
return ret;
}
if (vreg->logical_type == SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS) {
ret = spmi_regulator_ftsmps_init_slew_rate(vreg);
......
......@@ -16,12 +16,16 @@
* more details.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/mfd/rk808.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/mfd/rk808.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
#include <linux/gpio/consumer.h>
/* Field Definitions */
#define RK808_BUCK_VSEL_MASK 0x3f
......@@ -36,12 +40,25 @@
#define RK808_RAMP_RATE_6MV_PER_US (2 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_10MV_PER_US (3 << RK808_RAMP_RATE_OFFSET)
#define RK808_DVS2_POL BIT(2)
#define RK808_DVS1_POL BIT(1)
/* Offset from XXX_ON_VSEL to XXX_SLP_VSEL */
#define RK808_SLP_REG_OFFSET 1
/* Offset from XXX_ON_VSEL to XXX_DVS_VSEL */
#define RK808_DVS_REG_OFFSET 2
/* Offset from XXX_EN_REG to SLEEP_SET_OFF_XXX */
#define RK808_SLP_SET_OFF_REG_OFFSET 2
/* max steps for increase voltage of Buck1/2, equal 100mv*/
#define MAX_STEPS_ONE_TIME 8
struct rk808_regulator_data {
struct gpio_desc *dvs_gpio[2];
};
static const int rk808_buck_config_regs[] = {
RK808_BUCK1_CONFIG_REG,
RK808_BUCK2_CONFIG_REG,
......@@ -70,6 +87,131 @@ static const struct regulator_linear_range rk808_ldo6_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0, 17, 100000),
};
static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
int id = rdev->desc->id - RK808_ID_DCDC1;
struct gpio_desc *gpio = pdata->dvs_gpio[id];
unsigned int val;
int ret;
if (!gpio || gpiod_get_value(gpio) == 0)
return regulator_get_voltage_sel_regmap(rdev);
ret = regmap_read(rdev->regmap,
rdev->desc->vsel_reg + RK808_DVS_REG_OFFSET,
&val);
if (ret != 0)
return ret;
val &= rdev->desc->vsel_mask;
val >>= ffs(rdev->desc->vsel_mask) - 1;
return val;
}
static int rk808_buck1_2_i2c_set_voltage_sel(struct regulator_dev *rdev,
unsigned sel)
{
int ret, delta_sel;
unsigned int old_sel, tmp, val, mask = rdev->desc->vsel_mask;
ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
if (ret != 0)
return ret;
tmp = val & ~mask;
old_sel = val & mask;
old_sel >>= ffs(mask) - 1;
delta_sel = sel - old_sel;
/*
* If directly modify the register to change the voltage, we will face
* the risk of overshoot. Put it into a multi-step, can effectively
* avoid this problem, a step is 100mv here.
*/
while (delta_sel > MAX_STEPS_ONE_TIME) {
old_sel += MAX_STEPS_ONE_TIME;
val = old_sel << (ffs(mask) - 1);
val |= tmp;
/*
* i2c is 400kHz (2.5us per bit) and we must transmit _at least_
* 3 bytes (24 bits) plus start and stop so 26 bits. So we've
* got more than 65 us between each voltage change and thus
* won't ramp faster than ~1500 uV / us.
*/
ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
delta_sel = sel - old_sel;
}
sel <<= ffs(mask) - 1;
val = tmp | sel;
ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
/*
* When we change the voltage register directly, the ramp rate is about
* 100000uv/us, wait 1us to make sure the target voltage to be stable,
* so we needn't wait extra time after that.
*/
udelay(1);
return ret;
}
static int rk808_buck1_2_set_voltage_sel(struct regulator_dev *rdev,
unsigned sel)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
int id = rdev->desc->id - RK808_ID_DCDC1;
struct gpio_desc *gpio = pdata->dvs_gpio[id];
unsigned int reg = rdev->desc->vsel_reg;
unsigned old_sel;
int ret, gpio_level;
if (!gpio)
return rk808_buck1_2_i2c_set_voltage_sel(rdev, sel);
gpio_level = gpiod_get_value(gpio);
if (gpio_level == 0) {
reg += RK808_DVS_REG_OFFSET;
ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &old_sel);
} else {
ret = regmap_read(rdev->regmap,
reg + RK808_DVS_REG_OFFSET,
&old_sel);
}
if (ret != 0)
return ret;
sel <<= ffs(rdev->desc->vsel_mask) - 1;
sel |= old_sel & ~rdev->desc->vsel_mask;
ret = regmap_write(rdev->regmap, reg, sel);
if (ret)
return ret;
gpiod_set_value(gpio, !gpio_level);
return ret;
}
static int rk808_buck1_2_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
int id = rdev->desc->id - RK808_ID_DCDC1;
struct gpio_desc *gpio = pdata->dvs_gpio[id];
/* if there is no dvs1/2 pin, we don't need wait extra time here. */
if (!gpio)
return 0;
return regulator_set_voltage_time_sel(rdev, old_selector, new_selector);
}
static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
unsigned int ramp_value = RK808_RAMP_RATE_10MV_PER_US;
......@@ -137,8 +279,9 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
static struct regulator_ops rk808_buck1_2_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = rk808_buck1_2_get_voltage_sel_regmap,
.set_voltage_sel = rk808_buck1_2_set_voltage_sel,
.set_voltage_time_sel = rk808_buck1_2_set_voltage_time_sel,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
......@@ -380,25 +523,69 @@ static struct of_regulator_match rk808_reg_matches[] = {
[RK808_ID_SWITCH2] = { .name = "SWITCH_REG2" },
};
static int rk808_regulator_dt_parse_pdata(struct device *dev,
struct device *client_dev,
struct regmap *map,
struct rk808_regulator_data *pdata)
{
struct device_node *np;
int tmp, ret, i;
np = of_get_child_by_name(client_dev->of_node, "regulators");
if (!np)
return -ENXIO;
ret = of_regulator_match(dev, np, rk808_reg_matches,
RK808_NUM_REGULATORS);
if (ret < 0)
goto dt_parse_end;
for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
pdata->dvs_gpio[i] =
devm_gpiod_get_index_optional(client_dev, "dvs", i,
GPIOD_OUT_LOW);
if (IS_ERR(pdata->dvs_gpio[i])) {
ret = PTR_ERR(pdata->dvs_gpio[i]);
dev_err(dev, "failed to get dvs%d gpio (%d)\n", i, ret);
goto dt_parse_end;
}
if (!pdata->dvs_gpio[i]) {
dev_warn(dev, "there is no dvs%d gpio\n", i);
continue;
}
tmp = i ? RK808_DVS2_POL : RK808_DVS1_POL;
ret = regmap_update_bits(map, RK808_IO_POL_REG, tmp,
gpiod_is_active_low(pdata->dvs_gpio[i]) ?
0 : tmp);
}
dt_parse_end:
of_node_put(np);
return ret;
}
static int rk808_regulator_probe(struct platform_device *pdev)
{
struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
struct i2c_client *client = rk808->i2c;
struct device_node *reg_np;
struct regulator_config config = {};
struct regulator_dev *rk808_rdev;
struct rk808_regulator_data *pdata;
int ret, i;
reg_np = of_get_child_by_name(client->dev.of_node, "regulators");
if (!reg_np)
return -ENXIO;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
ret = of_regulator_match(&pdev->dev, reg_np, rk808_reg_matches,
RK808_NUM_REGULATORS);
of_node_put(reg_np);
ret = rk808_regulator_dt_parse_pdata(&pdev->dev, &client->dev,
rk808->regmap, pdata);
if (ret < 0)
return ret;
platform_set_drvdata(pdev, pdata);
/* Instantiate the regulators */
for (i = 0; i < RK808_NUM_REGULATORS; i++) {
if (!rk808_reg_matches[i].init_data ||
......@@ -406,7 +593,7 @@ static int rk808_regulator_probe(struct platform_device *pdev)
continue;
config.dev = &client->dev;
config.driver_data = rk808;
config.driver_data = pdata;
config.regmap = rk808->regmap;
config.of_node = rk808_reg_matches[i].of_node;
config.init_data = rk808_reg_matches[i].init_data;
......@@ -427,6 +614,7 @@ static struct platform_driver rk808_regulator_driver = {
.probe = rk808_regulator_probe,
.driver = {
.name = "rk808-regulator",
.owner = THIS_MODULE,
},
};
......
......@@ -362,7 +362,6 @@ MODULE_DEVICE_TABLE(i2c, tps51632_id);
static struct i2c_driver tps51632_i2c_driver = {
.driver = {
.name = "tps51632",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(tps51632_of_match),
},
.probe = tps51632_probe,
......
......@@ -515,7 +515,6 @@ MODULE_DEVICE_TABLE(i2c, tps62360_id);
static struct i2c_driver tps62360_i2c_driver = {
.driver = {
.name = "tps62360",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(tps62360_of_match),
},
.probe = tps62360_probe,
......
......@@ -410,7 +410,6 @@ MODULE_DEVICE_TABLE(i2c, tps_65023_id);
static struct i2c_driver tps_65023_i2c_driver = {
.driver = {
.name = "tps65023",
.owner = THIS_MODULE,
},
.probe = tps_65023_probe,
.id_table = tps_65023_id,
......
......@@ -422,12 +422,12 @@ static struct tps6586x_platform_data *tps6586x_parse_regulator_dt(
return NULL;
for (i = 0; i < num; i++) {
int id;
uintptr_t id;
if (!tps6586x_matches[i].init_data)
continue;
pdata->reg_init_data[i] = tps6586x_matches[i].init_data;
id = (int)tps6586x_matches[i].driver_data;
id = (uintptr_t)tps6586x_matches[i].driver_data;
if (id == TPS6586X_ID_SYS)
sys_rail = pdata->reg_init_data[i]->constraints.name;
......
/*
* Common data shared between Maxim 77693 and 77843 drivers
*
* Copyright (C) 2015 Samsung Electronics
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __LINUX_MFD_MAX77693_COMMON_H
#define __LINUX_MFD_MAX77693_COMMON_H
enum max77693_types {
TYPE_MAX77693_UNKNOWN,
TYPE_MAX77693,
TYPE_MAX77843,
TYPE_MAX77693_NUM,
};
/*
* Shared also with max77843.
*/
struct max77693_dev {
struct device *dev;
struct i2c_client *i2c; /* 0xCC , PMIC, Charger, Flash LED */
struct i2c_client *i2c_muic; /* 0x4A , MUIC */
struct i2c_client *i2c_haptic; /* MAX77693: 0x90 , Haptic */
struct i2c_client *i2c_chg; /* MAX77843: 0xD2, Charger */
enum max77693_types type;
struct regmap *regmap;
struct regmap *regmap_muic;
struct regmap *regmap_haptic; /* Only MAX77693 */
struct regmap *regmap_chg; /* Only MAX77843 */
struct regmap_irq_chip_data *irq_data_led;
struct regmap_irq_chip_data *irq_data_topsys;
struct regmap_irq_chip_data *irq_data_chg; /* Only MAX77693 */
struct regmap_irq_chip_data *irq_data_muic;
int irq;
};
#endif /* __LINUX_MFD_MAX77693_COMMON_H */
......@@ -310,30 +310,30 @@ enum max77693_muic_reg {
#define INTMASK2_CHGTYP_MASK (1 << INTMASK2_CHGTYP_SHIFT)
/* MAX77693 MUIC - STATUS1~3 Register */
#define STATUS1_ADC_SHIFT (0)
#define STATUS1_ADCLOW_SHIFT (5)
#define STATUS1_ADCERR_SHIFT (6)
#define STATUS1_ADC1K_SHIFT (7)
#define STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT)
#define STATUS1_ADCLOW_MASK (0x1 << STATUS1_ADCLOW_SHIFT)
#define STATUS1_ADCERR_MASK (0x1 << STATUS1_ADCERR_SHIFT)
#define STATUS1_ADC1K_MASK (0x1 << STATUS1_ADC1K_SHIFT)
#define STATUS2_CHGTYP_SHIFT (0)
#define STATUS2_CHGDETRUN_SHIFT (3)
#define STATUS2_DCDTMR_SHIFT (4)
#define STATUS2_DXOVP_SHIFT (5)
#define STATUS2_VBVOLT_SHIFT (6)
#define STATUS2_VIDRM_SHIFT (7)
#define STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT)
#define STATUS2_CHGDETRUN_MASK (0x1 << STATUS2_CHGDETRUN_SHIFT)
#define STATUS2_DCDTMR_MASK (0x1 << STATUS2_DCDTMR_SHIFT)
#define STATUS2_DXOVP_MASK (0x1 << STATUS2_DXOVP_SHIFT)
#define STATUS2_VBVOLT_MASK (0x1 << STATUS2_VBVOLT_SHIFT)
#define STATUS2_VIDRM_MASK (0x1 << STATUS2_VIDRM_SHIFT)
#define STATUS3_OVP_SHIFT (2)
#define STATUS3_OVP_MASK (0x1 << STATUS3_OVP_SHIFT)
#define MAX77693_STATUS1_ADC_SHIFT 0
#define MAX77693_STATUS1_ADCLOW_SHIFT 5
#define MAX77693_STATUS1_ADCERR_SHIFT 6
#define MAX77693_STATUS1_ADC1K_SHIFT 7
#define MAX77693_STATUS1_ADC_MASK (0x1f << MAX77693_STATUS1_ADC_SHIFT)
#define MAX77693_STATUS1_ADCLOW_MASK BIT(MAX77693_STATUS1_ADCLOW_SHIFT)
#define MAX77693_STATUS1_ADCERR_MASK BIT(MAX77693_STATUS1_ADCERR_SHIFT)
#define MAX77693_STATUS1_ADC1K_MASK BIT(MAX77693_STATUS1_ADC1K_SHIFT)
#define MAX77693_STATUS2_CHGTYP_SHIFT 0
#define MAX77693_STATUS2_CHGDETRUN_SHIFT 3
#define MAX77693_STATUS2_DCDTMR_SHIFT 4
#define MAX77693_STATUS2_DXOVP_SHIFT 5
#define MAX77693_STATUS2_VBVOLT_SHIFT 6
#define MAX77693_STATUS2_VIDRM_SHIFT 7
#define MAX77693_STATUS2_CHGTYP_MASK (0x7 << MAX77693_STATUS2_CHGTYP_SHIFT)
#define MAX77693_STATUS2_CHGDETRUN_MASK BIT(MAX77693_STATUS2_CHGDETRUN_SHIFT)
#define MAX77693_STATUS2_DCDTMR_MASK BIT(MAX77693_STATUS2_DCDTMR_SHIFT)
#define MAX77693_STATUS2_DXOVP_MASK BIT(MAX77693_STATUS2_DXOVP_SHIFT)
#define MAX77693_STATUS2_VBVOLT_MASK BIT(MAX77693_STATUS2_VBVOLT_SHIFT)
#define MAX77693_STATUS2_VIDRM_MASK BIT(MAX77693_STATUS2_VIDRM_SHIFT)
#define MAX77693_STATUS3_OVP_SHIFT 2
#define MAX77693_STATUS3_OVP_MASK BIT(MAX77693_STATUS3_OVP_SHIFT)
/* MAX77693 CDETCTRL1~2 register */
#define CDETCTRL1_CHGDETEN_SHIFT (0)
......@@ -362,38 +362,38 @@ enum max77693_muic_reg {
#define COMN1SW_MASK (0x7 << COMN1SW_SHIFT)
#define COMP2SW_MASK (0x7 << COMP2SW_SHIFT)
#define COMP_SW_MASK (COMP2SW_MASK | COMN1SW_MASK)
#define CONTROL1_SW_USB ((1 << COMP2SW_SHIFT) \
#define MAX77693_CONTROL1_SW_USB ((1 << COMP2SW_SHIFT) \
| (1 << COMN1SW_SHIFT))
#define CONTROL1_SW_AUDIO ((2 << COMP2SW_SHIFT) \
#define MAX77693_CONTROL1_SW_AUDIO ((2 << COMP2SW_SHIFT) \
| (2 << COMN1SW_SHIFT))
#define CONTROL1_SW_UART ((3 << COMP2SW_SHIFT) \
#define MAX77693_CONTROL1_SW_UART ((3 << COMP2SW_SHIFT) \
| (3 << COMN1SW_SHIFT))
#define CONTROL1_SW_OPEN ((0 << COMP2SW_SHIFT) \
#define MAX77693_CONTROL1_SW_OPEN ((0 << COMP2SW_SHIFT) \
| (0 << COMN1SW_SHIFT))
#define CONTROL2_LOWPWR_SHIFT (0)
#define CONTROL2_ADCEN_SHIFT (1)
#define CONTROL2_CPEN_SHIFT (2)
#define CONTROL2_SFOUTASRT_SHIFT (3)
#define CONTROL2_SFOUTORD_SHIFT (4)
#define CONTROL2_ACCDET_SHIFT (5)
#define CONTROL2_USBCPINT_SHIFT (6)
#define CONTROL2_RCPS_SHIFT (7)
#define CONTROL2_LOWPWR_MASK (0x1 << CONTROL2_LOWPWR_SHIFT)
#define CONTROL2_ADCEN_MASK (0x1 << CONTROL2_ADCEN_SHIFT)
#define CONTROL2_CPEN_MASK (0x1 << CONTROL2_CPEN_SHIFT)
#define CONTROL2_SFOUTASRT_MASK (0x1 << CONTROL2_SFOUTASRT_SHIFT)
#define CONTROL2_SFOUTORD_MASK (0x1 << CONTROL2_SFOUTORD_SHIFT)
#define CONTROL2_ACCDET_MASK (0x1 << CONTROL2_ACCDET_SHIFT)
#define CONTROL2_USBCPINT_MASK (0x1 << CONTROL2_USBCPINT_SHIFT)
#define CONTROL2_RCPS_MASK (0x1 << CONTROL2_RCPS_SHIFT)
#define CONTROL3_JIGSET_SHIFT (0)
#define CONTROL3_BTLDSET_SHIFT (2)
#define CONTROL3_ADCDBSET_SHIFT (4)
#define CONTROL3_JIGSET_MASK (0x3 << CONTROL3_JIGSET_SHIFT)
#define CONTROL3_BTLDSET_MASK (0x3 << CONTROL3_BTLDSET_SHIFT)
#define CONTROL3_ADCDBSET_MASK (0x3 << CONTROL3_ADCDBSET_SHIFT)
#define MAX77693_CONTROL2_LOWPWR_SHIFT 0
#define MAX77693_CONTROL2_ADCEN_SHIFT 1
#define MAX77693_CONTROL2_CPEN_SHIFT 2
#define MAX77693_CONTROL2_SFOUTASRT_SHIFT 3
#define MAX77693_CONTROL2_SFOUTORD_SHIFT 4
#define MAX77693_CONTROL2_ACCDET_SHIFT 5
#define MAX77693_CONTROL2_USBCPINT_SHIFT 6
#define MAX77693_CONTROL2_RCPS_SHIFT 7
#define MAX77693_CONTROL2_LOWPWR_MASK BIT(MAX77693_CONTROL2_LOWPWR_SHIFT)
#define MAX77693_CONTROL2_ADCEN_MASK BIT(MAX77693_CONTROL2_ADCEN_SHIFT)
#define MAX77693_CONTROL2_CPEN_MASK BIT(MAX77693_CONTROL2_CPEN_SHIFT)
#define MAX77693_CONTROL2_SFOUTASRT_MASK BIT(MAX77693_CONTROL2_SFOUTASRT_SHIFT)
#define MAX77693_CONTROL2_SFOUTORD_MASK BIT(MAX77693_CONTROL2_SFOUTORD_SHIFT)
#define MAX77693_CONTROL2_ACCDET_MASK BIT(MAX77693_CONTROL2_ACCDET_SHIFT)
#define MAX77693_CONTROL2_USBCPINT_MASK BIT(MAX77693_CONTROL2_USBCPINT_SHIFT)
#define MAX77693_CONTROL2_RCPS_MASK BIT(MAX77693_CONTROL2_RCPS_SHIFT)
#define MAX77693_CONTROL3_JIGSET_SHIFT 0
#define MAX77693_CONTROL3_BTLDSET_SHIFT 2
#define MAX77693_CONTROL3_ADCDBSET_SHIFT 4
#define MAX77693_CONTROL3_JIGSET_MASK (0x3 << MAX77693_CONTROL3_JIGSET_SHIFT)
#define MAX77693_CONTROL3_BTLDSET_MASK (0x3 << MAX77693_CONTROL3_BTLDSET_SHIFT)
#define MAX77693_CONTROL3_ADCDBSET_MASK (0x3 << MAX77693_CONTROL3_ADCDBSET_SHIFT)
/* Slave addr = 0x90: Haptic */
enum max77693_haptic_reg {
......@@ -529,36 +529,4 @@ enum max77693_irq_muic {
MAX77693_MUIC_IRQ_NR,
};
struct max77693_dev {
struct device *dev;
struct i2c_client *i2c; /* 0xCC , PMIC, Charger, Flash LED */
struct i2c_client *muic; /* 0x4A , MUIC */
struct i2c_client *haptic; /* 0x90 , Haptic */
int type;
struct regmap *regmap;
struct regmap *regmap_muic;
struct regmap *regmap_haptic;
struct regmap_irq_chip_data *irq_data_led;
struct regmap_irq_chip_data *irq_data_topsys;
struct regmap_irq_chip_data *irq_data_charger;
struct regmap_irq_chip_data *irq_data_muic;
int irq;
int irq_gpio;
struct mutex irqlock;
int irq_masks_cur[MAX77693_IRQ_GROUP_NR];
int irq_masks_cache[MAX77693_IRQ_GROUP_NR];
};
enum max77693_types {
TYPE_MAX77693,
};
extern int max77693_irq_init(struct max77693_dev *max77686);
extern void max77693_irq_exit(struct max77693_dev *max77686);
extern int max77693_irq_resume(struct max77693_dev *max77686);
#endif /* __LINUX_MFD_MAX77693_PRIV_H */
......@@ -318,62 +318,62 @@ enum max77843_irq_muic {
MAX77843_INTSRCMASK_SYS_MASK | MAX77843_INTSRCMASK_CHGR_MASK)
/* MAX77843 STATUS register*/
#define STATUS1_ADC_SHIFT 0
#define STATUS1_ADCERROR_SHIFT 6
#define STATUS1_ADC1K_SHIFT 7
#define STATUS2_CHGTYP_SHIFT 0
#define STATUS2_CHGDETRUN_SHIFT 3
#define STATUS2_DCDTMR_SHIFT 4
#define STATUS2_DXOVP_SHIFT 5
#define STATUS2_VBVOLT_SHIFT 6
#define STATUS3_VBADC_SHIFT 0
#define STATUS3_VDNMON_SHIFT 4
#define STATUS3_DNRES_SHIFT 5
#define STATUS3_MPNACK_SHIFT 6
#define MAX77843_MUIC_STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT)
#define MAX77843_MUIC_STATUS1_ADCERROR_MASK BIT(STATUS1_ADCERROR_SHIFT)
#define MAX77843_MUIC_STATUS1_ADC1K_MASK BIT(STATUS1_ADC1K_SHIFT)
#define MAX77843_MUIC_STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT)
#define MAX77843_MUIC_STATUS2_CHGDETRUN_MASK BIT(STATUS2_CHGDETRUN_SHIFT)
#define MAX77843_MUIC_STATUS2_DCDTMR_MASK BIT(STATUS2_DCDTMR_SHIFT)
#define MAX77843_MUIC_STATUS2_DXOVP_MASK BIT(STATUS2_DXOVP_SHIFT)
#define MAX77843_MUIC_STATUS2_VBVOLT_MASK BIT(STATUS2_VBVOLT_SHIFT)
#define MAX77843_MUIC_STATUS3_VBADC_MASK (0xf << STATUS3_VBADC_SHIFT)
#define MAX77843_MUIC_STATUS3_VDNMON_MASK BIT(STATUS3_VDNMON_SHIFT)
#define MAX77843_MUIC_STATUS3_DNRES_MASK BIT(STATUS3_DNRES_SHIFT)
#define MAX77843_MUIC_STATUS3_MPNACK_MASK BIT(STATUS3_MPNACK_SHIFT)
#define MAX77843_MUIC_STATUS1_ADC_SHIFT 0
#define MAX77843_MUIC_STATUS1_ADCERROR_SHIFT 6
#define MAX77843_MUIC_STATUS1_ADC1K_SHIFT 7
#define MAX77843_MUIC_STATUS2_CHGTYP_SHIFT 0
#define MAX77843_MUIC_STATUS2_CHGDETRUN_SHIFT 3
#define MAX77843_MUIC_STATUS2_DCDTMR_SHIFT 4
#define MAX77843_MUIC_STATUS2_DXOVP_SHIFT 5
#define MAX77843_MUIC_STATUS2_VBVOLT_SHIFT 6
#define MAX77843_MUIC_STATUS3_VBADC_SHIFT 0
#define MAX77843_MUIC_STATUS3_VDNMON_SHIFT 4
#define MAX77843_MUIC_STATUS3_DNRES_SHIFT 5
#define MAX77843_MUIC_STATUS3_MPNACK_SHIFT 6
#define MAX77843_MUIC_STATUS1_ADC_MASK (0x1f << MAX77843_MUIC_STATUS1_ADC_SHIFT)
#define MAX77843_MUIC_STATUS1_ADCERROR_MASK BIT(MAX77843_MUIC_STATUS1_ADCERROR_SHIFT)
#define MAX77843_MUIC_STATUS1_ADC1K_MASK BIT(MAX77843_MUIC_STATUS1_ADC1K_SHIFT)
#define MAX77843_MUIC_STATUS2_CHGTYP_MASK (0x7 << MAX77843_MUIC_STATUS2_CHGTYP_SHIFT)
#define MAX77843_MUIC_STATUS2_CHGDETRUN_MASK BIT(MAX77843_MUIC_STATUS2_CHGDETRUN_SHIFT)
#define MAX77843_MUIC_STATUS2_DCDTMR_MASK BIT(MAX77843_MUIC_STATUS2_DCDTMR_SHIFT)
#define MAX77843_MUIC_STATUS2_DXOVP_MASK BIT(MAX77843_MUIC_STATUS2_DXOVP_SHIFT)
#define MAX77843_MUIC_STATUS2_VBVOLT_MASK BIT(MAX77843_MUIC_STATUS2_VBVOLT_SHIFT)
#define MAX77843_MUIC_STATUS3_VBADC_MASK (0xf << MAX77843_MUIC_STATUS3_VBADC_SHIFT)
#define MAX77843_MUIC_STATUS3_VDNMON_MASK BIT(MAX77843_MUIC_STATUS3_VDNMON_SHIFT)
#define MAX77843_MUIC_STATUS3_DNRES_MASK BIT(MAX77843_MUIC_STATUS3_DNRES_SHIFT)
#define MAX77843_MUIC_STATUS3_MPNACK_MASK BIT(MAX77843_MUIC_STATUS3_MPNACK_SHIFT)
/* MAX77843 CONTROL register */
#define CONTROL1_COMP1SW_SHIFT 0
#define CONTROL1_COMP2SW_SHIFT 3
#define CONTROL1_IDBEN_SHIFT 7
#define CONTROL2_LOWPWR_SHIFT 0
#define CONTROL2_ADCEN_SHIFT 1
#define CONTROL2_CPEN_SHIFT 2
#define CONTROL2_ACC_DET_SHIFT 5
#define CONTROL2_USBCPINT_SHIFT 6
#define CONTROL2_RCPS_SHIFT 7
#define CONTROL3_JIGSET_SHIFT 0
#define CONTROL4_ADCDBSET_SHIFT 0
#define CONTROL4_USBAUTO_SHIFT 4
#define CONTROL4_FCTAUTO_SHIFT 5
#define CONTROL4_ADCMODE_SHIFT 6
#define MAX77843_MUIC_CONTROL1_COMP1SW_MASK (0x7 << CONTROL1_COMP1SW_SHIFT)
#define MAX77843_MUIC_CONTROL1_COMP2SW_MASK (0x7 << CONTROL1_COMP2SW_SHIFT)
#define MAX77843_MUIC_CONTROL1_IDBEN_MASK BIT(CONTROL1_IDBEN_SHIFT)
#define MAX77843_MUIC_CONTROL2_LOWPWR_MASK BIT(CONTROL2_LOWPWR_SHIFT)
#define MAX77843_MUIC_CONTROL2_ADCEN_MASK BIT(CONTROL2_ADCEN_SHIFT)
#define MAX77843_MUIC_CONTROL2_CPEN_MASK BIT(CONTROL2_CPEN_SHIFT)
#define MAX77843_MUIC_CONTROL2_ACC_DET_MASK BIT(CONTROL2_ACC_DET_SHIFT)
#define MAX77843_MUIC_CONTROL2_USBCPINT_MASK BIT(CONTROL2_USBCPINT_SHIFT)
#define MAX77843_MUIC_CONTROL2_RCPS_MASK BIT(CONTROL2_RCPS_SHIFT)
#define MAX77843_MUIC_CONTROL3_JIGSET_MASK (0x3 << CONTROL3_JIGSET_SHIFT)
#define MAX77843_MUIC_CONTROL4_ADCDBSET_MASK (0x3 << CONTROL4_ADCDBSET_SHIFT)
#define MAX77843_MUIC_CONTROL4_USBAUTO_MASK BIT(CONTROL4_USBAUTO_SHIFT)
#define MAX77843_MUIC_CONTROL4_FCTAUTO_MASK BIT(CONTROL4_FCTAUTO_SHIFT)
#define MAX77843_MUIC_CONTROL4_ADCMODE_MASK (0x3 << CONTROL4_ADCMODE_SHIFT)
#define MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT 0
#define MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT 3
#define MAX77843_MUIC_CONTROL1_IDBEN_SHIFT 7
#define MAX77843_MUIC_CONTROL2_LOWPWR_SHIFT 0
#define MAX77843_MUIC_CONTROL2_ADCEN_SHIFT 1
#define MAX77843_MUIC_CONTROL2_CPEN_SHIFT 2
#define MAX77843_MUIC_CONTROL2_ACC_DET_SHIFT 5
#define MAX77843_MUIC_CONTROL2_USBCPINT_SHIFT 6
#define MAX77843_MUIC_CONTROL2_RCPS_SHIFT 7
#define MAX77843_MUIC_CONTROL3_JIGSET_SHIFT 0
#define MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT 0
#define MAX77843_MUIC_CONTROL4_USBAUTO_SHIFT 4
#define MAX77843_MUIC_CONTROL4_FCTAUTO_SHIFT 5
#define MAX77843_MUIC_CONTROL4_ADCMODE_SHIFT 6
#define MAX77843_MUIC_CONTROL1_COMP1SW_MASK (0x7 << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT)
#define MAX77843_MUIC_CONTROL1_COMP2SW_MASK (0x7 << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT)
#define MAX77843_MUIC_CONTROL1_IDBEN_MASK BIT(MAX77843_MUIC_CONTROL1_IDBEN_SHIFT)
#define MAX77843_MUIC_CONTROL2_LOWPWR_MASK BIT(MAX77843_MUIC_CONTROL2_LOWPWR_SHIFT)
#define MAX77843_MUIC_CONTROL2_ADCEN_MASK BIT(MAX77843_MUIC_CONTROL2_ADCEN_SHIFT)
#define MAX77843_MUIC_CONTROL2_CPEN_MASK BIT(MAX77843_MUIC_CONTROL2_CPEN_SHIFT)
#define MAX77843_MUIC_CONTROL2_ACC_DET_MASK BIT(MAX77843_MUIC_CONTROL2_ACC_DET_SHIFT)
#define MAX77843_MUIC_CONTROL2_USBCPINT_MASK BIT(MAX77843_MUIC_CONTROL2_USBCPINT_SHIFT)
#define MAX77843_MUIC_CONTROL2_RCPS_MASK BIT(MAX77843_MUIC_CONTROL2_RCPS_SHIFT)
#define MAX77843_MUIC_CONTROL3_JIGSET_MASK (0x3 << MAX77843_MUIC_CONTROL3_JIGSET_SHIFT)
#define MAX77843_MUIC_CONTROL4_ADCDBSET_MASK (0x3 << MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT)
#define MAX77843_MUIC_CONTROL4_USBAUTO_MASK BIT(MAX77843_MUIC_CONTROL4_USBAUTO_SHIFT)
#define MAX77843_MUIC_CONTROL4_FCTAUTO_MASK BIT(MAX77843_MUIC_CONTROL4_FCTAUTO_SHIFT)
#define MAX77843_MUIC_CONTROL4_ADCMODE_MASK (0x3 << MAX77843_MUIC_CONTROL4_ADCMODE_SHIFT)
/* MAX77843 switch port */
#define COM_OPEN 0
......@@ -383,38 +383,38 @@ enum max77843_irq_muic {
#define COM_AUX_USB 4
#define COM_AUX_UART 5
#define CONTROL1_COM_SW \
#define MAX77843_MUIC_CONTROL1_COM_SW \
((MAX77843_MUIC_CONTROL1_COMP1SW_MASK | \
MAX77843_MUIC_CONTROL1_COMP2SW_MASK))
#define CONTROL1_SW_OPEN \
((COM_OPEN << CONTROL1_COMP1SW_SHIFT | \
COM_OPEN << CONTROL1_COMP2SW_SHIFT))
#define CONTROL1_SW_USB \
((COM_USB << CONTROL1_COMP1SW_SHIFT | \
COM_USB << CONTROL1_COMP2SW_SHIFT))
#define CONTROL1_SW_AUDIO \
((COM_AUDIO << CONTROL1_COMP1SW_SHIFT | \
COM_AUDIO << CONTROL1_COMP2SW_SHIFT))
#define CONTROL1_SW_UART \
((COM_UART << CONTROL1_COMP1SW_SHIFT | \
COM_UART << CONTROL1_COMP2SW_SHIFT))
#define CONTROL1_SW_AUX_USB \
((COM_AUX_USB << CONTROL1_COMP1SW_SHIFT | \
COM_AUX_USB << CONTROL1_COMP2SW_SHIFT))
#define CONTROL1_SW_AUX_UART \
((COM_AUX_UART << CONTROL1_COMP1SW_SHIFT | \
COM_AUX_UART << CONTROL1_COMP2SW_SHIFT))
#define MAX77843_MUIC_CONTROL1_SW_OPEN \
((COM_OPEN << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
COM_OPEN << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
#define MAX77843_MUIC_CONTROL1_SW_USB \
((COM_USB << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
COM_USB << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
#define MAX77843_MUIC_CONTROL1_SW_AUDIO \
((COM_AUDIO << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
COM_AUDIO << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
#define MAX77843_MUIC_CONTROL1_SW_UART \
((COM_UART << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
COM_UART << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
#define MAX77843_MUIC_CONTROL1_SW_AUX_USB \
((COM_AUX_USB << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
COM_AUX_USB << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
#define MAX77843_MUIC_CONTROL1_SW_AUX_UART \
((COM_AUX_UART << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
COM_AUX_UART << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
#define MAX77843_DISABLE 0
#define MAX77843_ENABLE 1
#define CONTROL4_AUTO_DISABLE \
((MAX77843_DISABLE << CONTROL4_USBAUTO_SHIFT) | \
(MAX77843_DISABLE << CONTROL4_FCTAUTO_SHIFT))
((MAX77843_DISABLE << MAX77843_MUIC_CONTROL4_USBAUTO_SHIFT) | \
(MAX77843_DISABLE << MAX77843_MUIC_CONTROL4_FCTAUTO_SHIFT))
#define CONTROL4_AUTO_ENABLE \
((MAX77843_ENABLE << CONTROL4_USBAUTO_SHIFT) | \
(MAX77843_ENABLE << CONTROL4_FCTAUTO_SHIFT))
((MAX77843_ENABLE << MAX77843_MUIC_CONTROL4_USBAUTO_SHIFT) | \
(MAX77843_ENABLE << MAX77843_MUIC_CONTROL4_FCTAUTO_SHIFT))
/* MAX77843 SAFEOUT LDO Control register */
#define SAFEOUTCTRL_SAFEOUT1_SHIFT 0
......@@ -431,24 +431,4 @@ enum max77843_irq_muic {
#define MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK \
(0x3 << SAFEOUTCTRL_SAFEOUT2_SHIFT)
struct max77843 {
struct device *dev;
struct i2c_client *i2c;
struct i2c_client *i2c_chg;
struct i2c_client *i2c_fuel;
struct i2c_client *i2c_muic;
struct regmap *regmap;
struct regmap *regmap_chg;
struct regmap *regmap_fuel;
struct regmap *regmap_muic;
struct regmap_irq_chip_data *irq_data;
struct regmap_irq_chip_data *irq_data_chg;
struct regmap_irq_chip_data *irq_data_fuel;
struct regmap_irq_chip_data *irq_data_muic;
int irq;
};
#endif /* __MAX77843_H__ */
......@@ -550,8 +550,24 @@ static inline int regulator_count_voltages(struct regulator *regulator)
{
return 0;
}
static inline int regulator_list_voltage(struct regulator *regulator, unsigned selector)
{
return -EINVAL;
}
#endif
static inline int regulator_set_voltage_triplet(struct regulator *regulator,
int min_uV, int target_uV,
int max_uV)
{
if (regulator_set_voltage(regulator, target_uV, max_uV) == 0)
return 0;
return regulator_set_voltage(regulator, min_uV, max_uV);
}
static inline int regulator_set_voltage_tol(struct regulator *regulator,
int new_uV, int tol_uV)
{
......
This diff is collapsed.
......@@ -148,6 +148,7 @@ struct regulator_ops {
int (*get_current_limit) (struct regulator_dev *);
int (*set_input_current_limit) (struct regulator_dev *, int lim_uA);
int (*set_over_current_protection) (struct regulator_dev *);
/* enable/disable regulator */
int (*enable) (struct regulator_dev *);
......
......@@ -147,6 +147,7 @@ struct regulation_constraints {
unsigned ramp_disable:1; /* disable ramp delay */
unsigned soft_start:1; /* ramp voltage slowly */
unsigned pull_down:1; /* pull down resistor when regulator off */
unsigned over_current_protection:1; /* auto disable on over current */
};
/**
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment