wifi: rt2x00: use explicitly signed or unsigned types

On some platforms, `char` is unsigned, but this driver, for the most part,
assumed it was signed.  In other places, it uses `char` to mean an
unsigned number, but only in cases when the values are small.  And in
still other places, `char` is used as a boolean.  Put an end to this
confusion by declaring explicit types, depending on the context.

Link: https://lkml.kernel.org/r/20221019155541.3410813-1-Jason@zx2c4.comSigned-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

drivers/net/wireless/ralink/rt2x00/rt2400pci.c

@@ -1023,9 +1023,9 @@ static int rt2400pci_set_state(struct rt2x00_dev *rt2x00dev,
 {
 	u32 reg, reg2;
 	unsigned int i;
-	char put_to_sleep;
-	char bbp_state;
-	char rf_state;
+	bool put_to_sleep;
+	u8 bbp_state;
+	u8 rf_state;
 
 	put_to_sleep = (state != STATE_AWAKE);
 
@@ -1561,7 +1561,7 @@ static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 {
 	struct hw_mode_spec *spec = &rt2x00dev->spec;
 	struct channel_info *info;
-	char *tx_power;
+	u8 *tx_power;
 	unsigned int i;
 
 	/*

drivers/net/wireless/ralink/rt2x00/rt2400pci.h

@@ -939,7 +939,7 @@
 #define DEFAULT_TXPOWER	39
 
 #define __CLAMP_TX(__txpower) \
-	clamp_t(char, (__txpower), MIN_TXPOWER, MAX_TXPOWER)
+	clamp_t(u8, (__txpower), MIN_TXPOWER, MAX_TXPOWER)
 
 #define TXPOWER_FROM_DEV(__txpower) \
 	((__CLAMP_TX(__txpower) - MAX_TXPOWER) + MIN_TXPOWER)

drivers/net/wireless/ralink/rt2x00/rt2500pci.c

@@ -1176,9 +1176,9 @@ static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev,
 {
 	u32 reg, reg2;
 	unsigned int i;
-	char put_to_sleep;
-	char bbp_state;
-	char rf_state;
+	bool put_to_sleep;
+	u8 bbp_state;
+	u8 rf_state;
 
 	put_to_sleep = (state != STATE_AWAKE);
 
@@ -1856,7 +1856,7 @@ static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 {
 	struct hw_mode_spec *spec = &rt2x00dev->spec;
 	struct channel_info *info;
-	char *tx_power;
+	u8 *tx_power;
 	unsigned int i;
 
 	/*

drivers/net/wireless/ralink/rt2x00/rt2500pci.h

@@ -1219,6 +1219,6 @@
 	(((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
 
 #define TXPOWER_TO_DEV(__txpower) \
-	clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
+	clamp_t(u8, __txpower, MIN_TXPOWER, MAX_TXPOWER)
 
 #endif /* RT2500PCI_H */

drivers/net/wireless/ralink/rt2x00/rt2500usb.c

@@ -984,9 +984,9 @@ static int rt2500usb_set_state(struct rt2x00_dev *rt2x00dev,
 	u16 reg;
 	u16 reg2;
 	unsigned int i;
-	char put_to_sleep;
-	char bbp_state;
-	char rf_state;
+	bool put_to_sleep;
+	u8 bbp_state;
+	u8 rf_state;
 
 	put_to_sleep = (state != STATE_AWAKE);
 
@@ -1663,7 +1663,7 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 {
 	struct hw_mode_spec *spec = &rt2x00dev->spec;
 	struct channel_info *info;
-	char *tx_power;
+	u8 *tx_power;
 	unsigned int i;
 
 	/*

drivers/net/wireless/ralink/rt2x00/rt2500usb.h

@@ -839,6 +839,6 @@
 	(((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
 
 #define TXPOWER_TO_DEV(__txpower) \
-	clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
+	clamp_t(u8, __txpower, MIN_TXPOWER, MAX_TXPOWER)
 
 #endif /* RT2500USB_H */

drivers/net/wireless/ralink/rt2x00/rt2800lib.c

@@ -3372,10 +3372,10 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
 	if (rt2x00_has_cap_bt_coexist(rt2x00dev)) {
 		if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) {
 			/* r55/r59 value array of channel 1~14 */
-			static const char r55_bt_rev[] = {0x83, 0x83,
+			static const u8 r55_bt_rev[] = {0x83, 0x83,
 				0x83, 0x73, 0x73, 0x63, 0x53, 0x53,
 				0x53, 0x43, 0x43, 0x43, 0x43, 0x43};
-			static const char r59_bt_rev[] = {0x0e, 0x0e,
+			static const u8 r59_bt_rev[] = {0x0e, 0x0e,
 				0x0e, 0x0e, 0x0e, 0x0b, 0x0a, 0x09,
 				0x07, 0x07, 0x07, 0x07, 0x07, 0x07};
 
@@ -3384,7 +3384,7 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
 			rt2800_rfcsr_write(rt2x00dev, 59,
 					   r59_bt_rev[idx]);
 		} else {
-			static const char r59_bt[] = {0x8b, 0x8b, 0x8b,
+			static const u8 r59_bt[] = {0x8b, 0x8b, 0x8b,
 				0x8b, 0x8b, 0x8b, 0x8b, 0x8a, 0x89,
 				0x88, 0x88, 0x86, 0x85, 0x84};
 
@@ -3392,10 +3392,10 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
 		}
 	} else {
 		if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) {
-			static const char r55_nonbt_rev[] = {0x23, 0x23,
+			static const u8 r55_nonbt_rev[] = {0x23, 0x23,
 				0x23, 0x23, 0x13, 0x13, 0x03, 0x03,
 				0x03, 0x03, 0x03, 0x03, 0x03, 0x03};
-			static const char r59_nonbt_rev[] = {0x07, 0x07,
+			static const u8 r59_nonbt_rev[] = {0x07, 0x07,
 				0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
 				0x07, 0x07, 0x06, 0x05, 0x04, 0x04};
 
@@ -3406,14 +3406,14 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
 		} else if (rt2x00_rt(rt2x00dev, RT5390) ||
 			   rt2x00_rt(rt2x00dev, RT5392) ||
 			   rt2x00_rt(rt2x00dev, RT6352)) {
-			static const char r59_non_bt[] = {0x8f, 0x8f,
+			static const u8 r59_non_bt[] = {0x8f, 0x8f,
 				0x8f, 0x8f, 0x8f, 0x8f, 0x8f, 0x8d,
 				0x8a, 0x88, 0x88, 0x87, 0x87, 0x86};
 
 			rt2800_rfcsr_write(rt2x00dev, 59,
 					   r59_non_bt[idx]);
 		} else if (rt2x00_rt(rt2x00dev, RT5350)) {
-			static const char r59_non_bt[] = {0x0b, 0x0b,
+			static const u8 r59_non_bt[] = {0x0b, 0x0b,
 				0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0a,
 				0x0a, 0x09, 0x08, 0x07, 0x07, 0x06};
 
@@ -4035,23 +4035,23 @@ static void rt2800_iq_calibrate(struct rt2x00_dev *rt2x00dev, int channel)
 	rt2800_bbp_write(rt2x00dev, 159, cal != 0xff ? cal : 0);
 }
 
-static char rt2800_txpower_to_dev(struct rt2x00_dev *rt2x00dev,
+static s8 rt2800_txpower_to_dev(struct rt2x00_dev *rt2x00dev,
 				  unsigned int channel,
-				  char txpower)
+				  s8 txpower)
 {
 	if (rt2x00_rt(rt2x00dev, RT3593) ||
 	    rt2x00_rt(rt2x00dev, RT3883))
 		txpower = rt2x00_get_field8(txpower, EEPROM_TXPOWER_ALC);
 
 	if (channel <= 14)
-		return clamp_t(char, txpower, MIN_G_TXPOWER, MAX_G_TXPOWER);
+		return clamp_t(s8, txpower, MIN_G_TXPOWER, MAX_G_TXPOWER);
 
 	if (rt2x00_rt(rt2x00dev, RT3593) ||
 	    rt2x00_rt(rt2x00dev, RT3883))
-		return clamp_t(char, txpower, MIN_A_TXPOWER_3593,
+		return clamp_t(s8, txpower, MIN_A_TXPOWER_3593,
 			       MAX_A_TXPOWER_3593);
 	else
-		return clamp_t(char, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER);
+		return clamp_t(s8, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER);
 }
 
 static void rt3883_bbp_adjust(struct rt2x00_dev *rt2x00dev,
@@ -8530,7 +8530,7 @@ static void rt2800_r_calibration(struct rt2x00_dev *rt2x00dev)
 	u8 bytevalue = 0;
 	int rcalcode;
 	u8 r_cal_code = 0;
-	char d1 = 0, d2 = 0;
+	s8 d1 = 0, d2 = 0;
 	u8 rfvalue;
 	u32 MAC_RF_BYPASS0, MAC_RF_CONTROL0, MAC_PWR_PIN_CFG;
 	u32 maccfg;
@@ -8591,7 +8591,7 @@ static void rt2800_r_calibration(struct rt2x00_dev *rt2x00dev)
 	if (bytevalue > 128)
 		d1 = bytevalue - 256;
 	else
-		d1 = (char)bytevalue;
+		d1 = (s8)bytevalue;
 	rt2800_bbp_write(rt2x00dev, 22, 0x0);
 	rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, 0x01);
 
@@ -8601,7 +8601,7 @@ static void rt2800_r_calibration(struct rt2x00_dev *rt2x00dev)
 	if (bytevalue > 128)
 		d2 = bytevalue - 256;
 	else
-		d2 = (char)bytevalue;
+		d2 = (s8)bytevalue;
 	rt2800_bbp_write(rt2x00dev, 22, 0x0);
 
 	rcalcode = rt2800_calcrcalibrationcode(rt2x00dev, d1, d2);
@@ -8703,7 +8703,7 @@ static void rt2800_rxdcoc_calibration(struct rt2x00_dev *rt2x00dev)
 static u32 rt2800_do_sqrt_accumulation(u32 si)
 {
 	u32 root, root_pre, bit;
-	char i;
+	s8 i;
 
 	bit = 1 << 15;
 	root = 0;
@@ -9330,11 +9330,11 @@ static void rt2800_loft_search(struct rt2x00_dev *rt2x00dev, u8 ch_idx,
 			       u8 alc_idx, u8 dc_result[][RF_ALC_NUM][2])
 {
 	u32 p0 = 0, p1 = 0, pf = 0;
-	char idx0 = 0, idx1 = 0;
+	s8 idx0 = 0, idx1 = 0;
 	u8 idxf[] = {0x00, 0x00};
 	u8 ibit = 0x20;
 	u8 iorq;
-	char bidx;
+	s8 bidx;
 
 	rt2800_bbp_write(rt2x00dev, 158, 0xb0);
 	rt2800_bbp_write(rt2x00dev, 159, 0x80);
@@ -9384,17 +9384,17 @@ static void rt2800_loft_search(struct rt2x00_dev *rt2x00dev, u8 ch_idx,
 static void rt2800_iq_search(struct rt2x00_dev *rt2x00dev, u8 ch_idx, u8 *ges, u8 *pes)
 {
 	u32 p0 = 0, p1 = 0, pf = 0;
-	char perr = 0, gerr = 0, iq_err = 0;
-	char pef = 0, gef = 0;
-	char psta, pend;
-	char gsta, gend;
+	s8 perr = 0, gerr = 0, iq_err = 0;
+	s8 pef = 0, gef = 0;
+	s8 psta, pend;
+	s8 gsta, gend;
 
 	u8 ibit = 0x20;
 	u8 first_search = 0x00, touch_neg_max = 0x00;
-	char idx0 = 0, idx1 = 0;
+	s8 idx0 = 0, idx1 = 0;
 	u8 gop;
 	u8 bbp = 0;
-	char bidx;
+	s8 bidx;
 
 	for (bidx = 5; bidx >= 1; bidx--) {
 		for (gop = 0; gop < 2; gop++) {
@@ -10043,11 +10043,11 @@ static int rt2800_rf_lp_config(struct rt2x00_dev *rt2x00dev, bool btxcal)
 	return 0;
 }
 
-static char rt2800_lp_tx_filter_bw_cal(struct rt2x00_dev *rt2x00dev)
+static s8 rt2800_lp_tx_filter_bw_cal(struct rt2x00_dev *rt2x00dev)
 {
 	unsigned int cnt;
 	u8 bbp_val;
-	char cal_val;
+	s8 cal_val;
 
 	rt2800_bbp_dcoc_write(rt2x00dev, 0, 0x82);
 
@@ -10079,7 +10079,7 @@ static void rt2800_bw_filter_calibration(struct rt2x00_dev *rt2x00dev,
 	u8 rx_filter_target_20m = 0x27, rx_filter_target_40m = 0x31;
 	int loop = 0, is_ht40, cnt;
 	u8 bbp_val, rf_val;
-	char cal_r32_init, cal_r32_val, cal_diff;
+	s8 cal_r32_init, cal_r32_val, cal_diff;
 	u8 saverfb5r00, saverfb5r01, saverfb5r03, saverfb5r04, saverfb5r05;
 	u8 saverfb5r06, saverfb5r07;
 	u8 saverfb5r08, saverfb5r17, saverfb5r18, saverfb5r19, saverfb5r20;
@@ -11550,9 +11550,9 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 {
 	struct hw_mode_spec *spec = &rt2x00dev->spec;
 	struct channel_info *info;
-	char *default_power1;
-	char *default_power2;
-	char *default_power3;
+	s8 *default_power1;
+	s8 *default_power2;
+	s8 *default_power3;
 	unsigned int i, tx_chains, rx_chains;
 	u32 reg;
 

drivers/net/wireless/ralink/rt2x00/rt2800lib.h

@@ -32,10 +32,10 @@ struct rf_reg_pair {
 struct rt2800_drv_data {
 	u8 calibration_bw20;
 	u8 calibration_bw40;
-	char rx_calibration_bw20;
-	char rx_calibration_bw40;
-	char tx_calibration_bw20;
-	char tx_calibration_bw40;
+	s8 rx_calibration_bw20;
+	s8 rx_calibration_bw40;
+	s8 tx_calibration_bw20;
+	s8 tx_calibration_bw40;
 	u8 bbp25;
 	u8 bbp26;
 	u8 txmixer_gain_24g;

drivers/net/wireless/ralink/rt2x00/rt2x00usb.c

@@ -117,12 +117,12 @@ int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev,
 				  const u16 buffer_length)
 {
 	int status = 0;
-	unsigned char *tb;
+	u8 *tb;
 	u16 off, len, bsize;
 
 	mutex_lock(&rt2x00dev->csr_mutex);
 
-	tb  = (char *)buffer;
+	tb  = (u8 *)buffer;
 	off = offset;
 	len = buffer_length;
 	while (len && !status) {
@@ -215,7 +215,7 @@ void rt2x00usb_register_read_async(struct rt2x00_dev *rt2x00dev,
 	rd->cr.wLength = cpu_to_le16(sizeof(u32));
 
 	usb_fill_control_urb(urb, usb_dev, usb_rcvctrlpipe(usb_dev, 0),
-			     (unsigned char *)(&rd->cr), &rd->reg, sizeof(rd->reg),
+			     (u8 *)(&rd->cr), &rd->reg, sizeof(rd->reg),
 			     rt2x00usb_register_read_async_cb, rd);
 	usb_anchor_urb(urb, rt2x00dev->anchor);
 	if (usb_submit_urb(urb, GFP_ATOMIC) < 0) {

drivers/net/wireless/ralink/rt2x00/rt61pci.c

@@ -1709,7 +1709,7 @@ static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state)
 {
 	u32 reg, reg2;
 	unsigned int i;
-	char put_to_sleep;
+	bool put_to_sleep;
 
 	put_to_sleep = (state != STATE_AWAKE);
 
@@ -2656,7 +2656,7 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 {
 	struct hw_mode_spec *spec = &rt2x00dev->spec;
 	struct channel_info *info;
-	char *tx_power;
+	u8 *tx_power;
 	unsigned int i;
 
 	/*

drivers/net/wireless/ralink/rt2x00/rt61pci.h

@@ -1484,6 +1484,6 @@ struct hw_pairwise_ta_entry {
 	(((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
 
 #define TXPOWER_TO_DEV(__txpower) \
-	clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
+	clamp_t(u8, __txpower, MIN_TXPOWER, MAX_TXPOWER)
 
 #endif /* RT61PCI_H */

drivers/net/wireless/ralink/rt2x00/rt73usb.c

@@ -1378,7 +1378,7 @@ static int rt73usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state)
 {
 	u32 reg, reg2;
 	unsigned int i;
-	char put_to_sleep;
+	bool put_to_sleep;
 
 	put_to_sleep = (state != STATE_AWAKE);
 
@@ -2090,7 +2090,7 @@ static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 {
 	struct hw_mode_spec *spec = &rt2x00dev->spec;
 	struct channel_info *info;
-	char *tx_power;
+	u8 *tx_power;
 	unsigned int i;
 
 	/*

drivers/net/wireless/ralink/rt2x00/rt73usb.h

@@ -1063,6 +1063,6 @@ struct hw_pairwise_ta_entry {
 	(((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
 
 #define TXPOWER_TO_DEV(__txpower) \
-	clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
+	clamp_t(u8, __txpower, MIN_TXPOWER, MAX_TXPOWER)
 
 #endif /* RT73USB_H */