ARM: dts: sun8i: Add DMA controller node

Add the DMA controller node and DMA bindings to the supported devices.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

arch/arm/boot/dts/sun8i-a23.dtsi

@@ -247,6 +247,15 @@ soc@01c00000 {
 		#size-cells = <1>;
 		ranges;
 
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun8i-a23-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <0 50 4>;
+			clocks = <&ahb1_gates 6>;
+			resets = <&ahb1_rst 6>;
+			#dma-cells = <1>;
+		};
+
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
@@ -376,6 +385,8 @@ uart0: serial@01c28000 {
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 16>;
 			resets = <&apb2_rst 16>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -387,6 +398,8 @@ uart1: serial@01c28400 {
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 17>;
 			resets = <&apb2_rst 17>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -398,6 +411,8 @@ uart2: serial@01c28800 {
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 18>;
 			resets = <&apb2_rst 18>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -409,6 +424,8 @@ uart3: serial@01c28c00 {
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 19>;
 			resets = <&apb2_rst 19>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -420,6 +437,8 @@ uart4: serial@01c29000 {
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 20>;
 			resets = <&apb2_rst 20>;
+			dmas = <&dma 10>, <&dma 10>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};