Commit d0f698c4 authored by Kashyap, Desai's avatar Kashyap, Desai Committed by James Bottomley

[SCSI] mptfusion: Added new less expensive RESET (Message Unit Reset)

Message Unit Reset - instructs the IOC to reset the Reply Post and
Free FIFO's. All the Message Frames on Reply Free FIFO are
discarded. All posted buffers are freed, and event notification is
turned off.  IOC doesnt reply to any outstanding request. This will
transfer IOC to READY state.  Message unit ready is less expensive
operations than Hard Reset.  soft reset will not force Firmware to
reload again, it only do clean up of Message units.

mpt_Soft_Hard_ResetHandler will first try for Soft Reset,if
it fails then go for big hammer reset which is Hard Reset.
Signed-off-by: default avatarKashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@suse.de>
parent 1a7d7eac
......@@ -5064,7 +5064,7 @@ mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
if (!timeleft) {
printk(KERN_DEBUG "%s: Issuing Reset from %s!!\n",
ioc->name, __func__);
mpt_HardResetHandler(ioc, CAN_SLEEP);
mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
mpt_free_msg_frame(ioc, mf);
}
goto out;
......@@ -6456,7 +6456,7 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
issue_hard_reset = 0;
printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
ioc->name, __func__);
mpt_HardResetHandler(ioc, CAN_SLEEP);
mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
mpt_free_msg_frame(ioc, mf);
/* attempt one retry for a timed out command */
if (!retry_count) {
......@@ -6904,6 +6904,172 @@ mpt_halt_firmware(MPT_ADAPTER *ioc)
}
EXPORT_SYMBOL(mpt_halt_firmware);
/**
* mpt_SoftResetHandler - Issues a less expensive reset
* @ioc: Pointer to MPT_ADAPTER structure
* @sleepFlag: Indicates if sleep or schedule must be called.
*
* Returns 0 for SUCCESS or -1 if FAILED.
*
* Message Unit Reset - instructs the IOC to reset the Reply Post and
* Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
* All posted buffers are freed, and event notification is turned off.
* IOC doesnt reply to any outstanding request. This will transfer IOC
* to READY state.
**/
int
mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
{
int rc;
int ii;
u8 cb_idx;
unsigned long flags;
u32 ioc_state;
unsigned long time_count;
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n",
ioc->name));
ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
if (mpt_fwfault_debug)
mpt_halt_firmware(ioc);
if (ioc_state == MPI_IOC_STATE_FAULT ||
ioc_state == MPI_IOC_STATE_RESET) {
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"skipping, either in FAULT or RESET state!\n", ioc->name));
return -1;
}
if (ioc->bus_type == FC) {
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"skipping, because the bus type is FC!\n", ioc->name));
return -1;
}
spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
if (ioc->ioc_reset_in_progress) {
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
return -1;
}
ioc->ioc_reset_in_progress = 1;
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
rc = -1;
for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
if (MptResetHandlers[cb_idx])
mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
}
spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
if (ioc->taskmgmt_in_progress) {
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
return -1;
}
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
/* Disable reply interrupts (also blocks FreeQ) */
CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
ioc->active = 0;
time_count = jiffies;
rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
if (MptResetHandlers[cb_idx])
mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET);
}
if (rc)
goto out;
ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
if (ioc_state != MPI_IOC_STATE_READY)
goto out;
for (ii = 0; ii < 5; ii++) {
/* Get IOC facts! Allow 5 retries */
rc = GetIocFacts(ioc, sleepFlag,
MPT_HOSTEVENT_IOC_RECOVER);
if (rc == 0)
break;
if (sleepFlag == CAN_SLEEP)
msleep(100);
else
mdelay(100);
}
if (ii == 5)
goto out;
rc = PrimeIocFifos(ioc);
if (rc != 0)
goto out;
rc = SendIocInit(ioc, sleepFlag);
if (rc != 0)
goto out;
rc = SendEventNotification(ioc, 1, sleepFlag);
if (rc != 0)
goto out;
if (ioc->hard_resets < -1)
ioc->hard_resets++;
/*
* At this point, we know soft reset succeeded.
*/
ioc->active = 1;
CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
out:
spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
ioc->ioc_reset_in_progress = 0;
ioc->taskmgmt_quiesce_io = 0;
ioc->taskmgmt_in_progress = 0;
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
if (ioc->active) { /* otherwise, hard reset coming */
for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
if (MptResetHandlers[cb_idx])
mpt_signal_reset(cb_idx, ioc,
MPT_IOC_POST_RESET);
}
}
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"SoftResetHandler: completed (%d seconds): %s\n",
ioc->name, jiffies_to_msecs(jiffies - time_count)/1000,
((rc == 0) ? "SUCCESS" : "FAILED")));
return rc;
}
/**
* mpt_Soft_Hard_ResetHandler - Try less expensive reset
* @ioc: Pointer to MPT_ADAPTER structure
* @sleepFlag: Indicates if sleep or schedule must be called.
*
* Returns 0 for SUCCESS or -1 if FAILED.
* Try for softreset first, only if it fails go for expensive
* HardReset.
**/
int
mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) {
int ret = -1;
ret = mpt_SoftResetHandler(ioc, sleepFlag);
if (ret == 0)
return ret;
ret = mpt_HardResetHandler(ioc, sleepFlag);
return ret;
}
EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* Reset Handling
......
......@@ -940,6 +940,7 @@ extern int mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp);
extern u32 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked);
extern void mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buf, int *size, int len, int showlan);
extern int mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
extern int mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
extern int mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *cfg);
extern int mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size);
extern void mpt_free_fw_memory(MPT_ADAPTER *ioc);
......
......@@ -311,7 +311,7 @@ mptctl_timeout_expired(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling HardReset! \n",
ioc->name));
CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status)
mpt_HardResetHandler(ioc, CAN_SLEEP);
mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
mpt_free_msg_frame(ioc, mf);
}
......
......@@ -2041,7 +2041,7 @@ static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset)
if (!timeleft) {
/* On timeout reset the board */
mpt_free_msg_frame(ioc, mf);
mpt_HardResetHandler(ioc, CAN_SLEEP);
mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
error = -ETIMEDOUT;
goto out_unlock;
}
......@@ -2226,7 +2226,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
if (!timeleft) {
printk(MYIOC_s_ERR_FMT "%s: smp timeout!\n", ioc->name, __func__);
/* On timeout reset the board */
mpt_HardResetHandler(ioc, CAN_SLEEP);
mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
ret = -ETIMEDOUT;
goto unmap;
}
......@@ -2833,7 +2833,7 @@ mptsas_exp_repmanufacture_info(MPT_ADAPTER *ioc,
if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_DID_IOCRESET)
goto out_free;
if (!timeleft)
mpt_HardResetHandler(ioc, CAN_SLEEP);
mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
goto out_free;
}
......@@ -4717,7 +4717,7 @@ mptsas_broadcast_primative_work(struct fw_event_work *fw_event)
if (issue_reset) {
printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
ioc->name, __func__);
mpt_HardResetHandler(ioc, CAN_SLEEP);
mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
}
mptsas_free_fw_event(ioc, fw_event);
}
......
......@@ -1711,7 +1711,7 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun,
if (issue_hard_reset) {
printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
ioc->name, __func__);
retval = mpt_HardResetHandler(ioc, CAN_SLEEP);
retval = mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
mpt_free_msg_frame(ioc, mf);
}
......@@ -1991,7 +1991,7 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt)
/* If our attempts to reset the host failed, then return a failed
* status. The host will be taken off line by the SCSI mid-layer.
*/
retval = mpt_HardResetHandler(ioc, CAN_SLEEP);
retval = mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
if (retval < 0)
status = FAILED;
else
......@@ -3040,7 +3040,7 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
if (!timeleft) {
printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
ioc->name, __func__);
mpt_HardResetHandler(ioc, CAN_SLEEP);
mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
mpt_free_msg_frame(ioc, mf);
}
goto out;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment