Commit d1aeb5f3 authored by Madhav Chauhan's avatar Madhav Chauhan Committed by Jani Nikula

drm/i915/icl: Configure DSI transcoder timings

As part of DSI enable sequence, transcoder timings
(horizontal & vertical) need to be set so that transcoder
will generate the stream output as per those timings.
This patch set required transcoder timings as per BSPEC.

v2: Remove TRANS_TIMING_SHIFT usage

v3 by Jani:
 - Rebase
 - Reduce temp variable use
 - Checkpatch fix
Signed-off-by: default avatarMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/525949ae4e919a4f2b807d606234322534656048.1539613303.git.jani.nikula@intel.com
parent 7b56caf3
......@@ -476,6 +476,121 @@ gen11_dsi_configure_transcoder(struct intel_encoder *encoder,
}
}
static void
gen11_dsi_set_transcoder_timings(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
const struct drm_display_mode *adjusted_mode =
&pipe_config->base.adjusted_mode;
enum port port;
enum transcoder dsi_trans;
/* horizontal timings */
u16 htotal, hactive, hsync_start, hsync_end, hsync_size;
u16 hfront_porch, hback_porch;
/* vertical timings */
u16 vtotal, vactive, vsync_start, vsync_end, vsync_shift;
hactive = adjusted_mode->crtc_hdisplay;
htotal = adjusted_mode->crtc_htotal;
hsync_start = adjusted_mode->crtc_hsync_start;
hsync_end = adjusted_mode->crtc_hsync_end;
hsync_size = hsync_end - hsync_start;
hfront_porch = (adjusted_mode->crtc_hsync_start -
adjusted_mode->crtc_hdisplay);
hback_porch = (adjusted_mode->crtc_htotal -
adjusted_mode->crtc_hsync_end);
vactive = adjusted_mode->crtc_vdisplay;
vtotal = adjusted_mode->crtc_vtotal;
vsync_start = adjusted_mode->crtc_vsync_start;
vsync_end = adjusted_mode->crtc_vsync_end;
vsync_shift = hsync_start - htotal / 2;
if (intel_dsi->dual_link) {
hactive /= 2;
if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
hactive += intel_dsi->pixel_overlap;
htotal /= 2;
}
/* minimum hactive as per bspec: 256 pixels */
if (adjusted_mode->crtc_hdisplay < 256)
DRM_ERROR("hactive is less then 256 pixels\n");
/* if RGB666 format, then hactive must be multiple of 4 pixels */
if (intel_dsi->pixel_format == MIPI_DSI_FMT_RGB666 && hactive % 4 != 0)
DRM_ERROR("hactive pixels are not multiple of 4\n");
/* program TRANS_HTOTAL register */
for_each_dsi_port(port, intel_dsi->ports) {
dsi_trans = dsi_port_to_transcoder(port);
I915_WRITE(HTOTAL(dsi_trans),
(hactive - 1) | ((htotal - 1) << 16));
}
/* TRANS_HSYNC register to be programmed only for video mode */
if (intel_dsi->operation_mode == INTEL_DSI_VIDEO_MODE) {
if (intel_dsi->video_mode_format ==
VIDEO_MODE_NON_BURST_WITH_SYNC_PULSE) {
/* BSPEC: hsync size should be atleast 16 pixels */
if (hsync_size < 16)
DRM_ERROR("hsync size < 16 pixels\n");
}
if (hback_porch < 16)
DRM_ERROR("hback porch < 16 pixels\n");
if (intel_dsi->dual_link) {
hsync_start /= 2;
hsync_end /= 2;
}
for_each_dsi_port(port, intel_dsi->ports) {
dsi_trans = dsi_port_to_transcoder(port);
I915_WRITE(HSYNC(dsi_trans),
(hsync_start - 1) | ((hsync_end - 1) << 16));
}
}
/* program TRANS_VTOTAL register */
for_each_dsi_port(port, intel_dsi->ports) {
dsi_trans = dsi_port_to_transcoder(port);
/*
* FIXME: Programing this by assuming progressive mode, since
* non-interlaced info from VBT is not saved inside
* struct drm_display_mode.
* For interlace mode: program required pixel minus 2
*/
I915_WRITE(VTOTAL(dsi_trans),
(vactive - 1) | ((vtotal - 1) << 16));
}
if (vsync_end < vsync_start || vsync_end > vtotal)
DRM_ERROR("Invalid vsync_end value\n");
if (vsync_start < vactive)
DRM_ERROR("vsync_start less than vactive\n");
/* program TRANS_VSYNC register */
for_each_dsi_port(port, intel_dsi->ports) {
dsi_trans = dsi_port_to_transcoder(port);
I915_WRITE(VSYNC(dsi_trans),
(vsync_start - 1) | ((vsync_end - 1) << 16));
}
/*
* FIXME: It has to be programmed only for interlaced
* modes. Put the check condition here once interlaced
* info available as described above.
* program TRANS_VSYNCSHIFT register
*/
for_each_dsi_port(port, intel_dsi->ports) {
dsi_trans = dsi_port_to_transcoder(port);
I915_WRITE(VSYNCSHIFT(dsi_trans), vsync_shift);
}
}
static void
gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config)
......@@ -512,4 +627,7 @@ gen11_dsi_pre_enable(struct intel_encoder *encoder,
/* step4: enable DSI port and DPHY */
gen11_dsi_enable_port_and_phy(encoder, pipe_config);
/* step6c: configure transcoder timings */
gen11_dsi_set_transcoder_timings(encoder, pipe_config);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment