Commit d235e64a authored by Alan Cox's avatar Alan Cox Committed by Dave Airlie

cdv: continue synching up with updated reference code

In particular clean up the errata handling and correct the crtc masks. We do
this a bit differently using our device abstraction for neatness.

This doesn't address the ACPI opregion and hotplug plumbing, nor the IRQ related
changes that will need. It touches on backlight init but the full backlight
support is not in this change set.
Signed-off-by: default avatarAlan Cox <alan@linux.intel.com>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
parent b60bfb65
......@@ -49,6 +49,9 @@ static void cdv_disable_vga(struct drm_device *dev)
static int cdv_output_init(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
drm_mode_create_scaling_mode_property(dev);
cdv_disable_vga(dev);
cdv_intel_crt_init(dev, &dev_priv->mode_dev);
......@@ -238,6 +241,18 @@ static void cdv_init_pm(struct drm_device *dev)
dev_err(dev->dev, "GPU: power management timed out.\n");
}
static void cdv_errata(struct drm_device *dev)
{
/* Disable bonus launch.
* CPU and GPU competes for memory and display misses updates and flickers.
* Worst with dual core, dual displays.
*
* Fixes were done to Win 7 gfx driver to disable a feature called Bonus
* Launch to work around the issue, by degrading performance.
*/
CDV_MSG_WRITE32(3, 0x30, 0x08027108);
}
/**
* cdv_save_display_registers - save registers lost on suspend
* @dev: our DRM device
......@@ -355,7 +370,7 @@ static int cdv_restore_display_registers(struct drm_device *dev)
REG_WRITE(PSB_INT_MASK_R, regs->cdv.saveIMR);
/* Fix arbitration bug */
CDV_MSG_WRITE32(3, 0x30, 0x08027108);
cdv_errata(dev);
drm_mode_config_reset(dev);
......@@ -464,8 +479,11 @@ const struct psb_ops cdv_chip_ops = {
.accel_2d = 0,
.pipes = 2,
.crtcs = 2,
.hdmi_mask = (1 << 0) | (1 << 1),
.lvds_mask = (1 << 1),
.sgx_offset = MRST_SGX_OFFSET,
.chip_setup = cdv_chip_setup,
.errata = cdv_errata,
.crtc_helper = &cdv_intel_helper_funcs,
.crtc_funcs = &cdv_intel_crtc_funcs,
......
......@@ -78,9 +78,6 @@ static int cdv_intel_crt_mode_valid(struct drm_connector *connector,
if (mode->clock > 355000)
return MODE_CLOCK_HIGH;
if (mode->hdisplay > 1680 || mode->vdisplay > 1050)
return MODE_PANEL;
return MODE_OK;
}
......@@ -148,13 +145,7 @@ static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector,
struct drm_device *dev = connector->dev;
u32 hotplug_en;
int i, tries = 0, ret = false;
u32 adpa_orig;
/* disable the DAC when doing the hotplug detection */
adpa_orig = REG_READ(ADPA);
REG_WRITE(ADPA, adpa_orig & ~(ADPA_DAC_ENABLE));
u32 orig;
/*
* On a CDV thep, CRT detect sequence need to be done twice
......@@ -162,7 +153,7 @@ static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector,
*/
tries = 2;
hotplug_en = REG_READ(PORT_HOTPLUG_EN);
orig = hotplug_en = REG_READ(PORT_HOTPLUG_EN);
hotplug_en &= ~(CRT_HOTPLUG_DETECT_MASK);
hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
......@@ -187,8 +178,11 @@ static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector,
CRT_HOTPLUG_MONITOR_NONE)
ret = true;
/* Restore the saved ADPA */
REG_WRITE(ADPA, adpa_orig);
/* clear the interrupt we just generated, if any */
REG_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);
/* and put the bits back */
REG_WRITE(PORT_HOTPLUG_EN, orig);
return ret;
}
......
......@@ -226,13 +226,13 @@ cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc,
int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
int ref_sfr = (pipe == 0) ? SB_REF_DPLLA : SB_REF_DPLLB;
u32 ref_value;
u32 lane_reg, lane_value;
cdv_sb_reset(dev);
if ((REG_READ(dpll_reg) & DPLL_SYNCLOCK_ENABLE) == 0) {
DRM_ERROR("Attempting to set DPLL with refclk disabled\n");
return -EBUSY;
}
REG_WRITE(dpll_reg, DPLL_SYNCLOCK_ENABLE | DPLL_VGA_MODE_DIS);
udelay(100);
/* Follow the BIOS and write the REF/SFR Register. Hardcoded value */
ref_value = 0x68A701;
......@@ -337,36 +337,29 @@ cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc,
if (ret)
return ret;
/* always Program the Lane Register for the Pipe A*/
/* if (pipe == 0) */ {
/* Program the Lane0/1 for HDMI B */
u32 lane_reg, lane_value;
lane_reg = PSB_LANE0;
cdv_sb_read(dev, lane_reg, &lane_value);
lane_value &= ~(LANE_PLL_MASK);
lane_value |= LANE_PLL_ENABLE;
cdv_sb_write(dev, lane_reg, lane_value);
lane_reg = PSB_LANE1;
cdv_sb_read(dev, lane_reg, &lane_value);
lane_value &= ~(LANE_PLL_MASK);
lane_value |= LANE_PLL_ENABLE;
cdv_sb_write(dev, lane_reg, lane_value);
/* Program the Lane2/3 for HDMI C */
lane_reg = PSB_LANE2;
cdv_sb_read(dev, lane_reg, &lane_value);
lane_value &= ~(LANE_PLL_MASK);
lane_value |= LANE_PLL_ENABLE;
cdv_sb_write(dev, lane_reg, lane_value);
lane_reg = PSB_LANE3;
cdv_sb_read(dev, lane_reg, &lane_value);
lane_value &= ~(LANE_PLL_MASK);
lane_value |= LANE_PLL_ENABLE;
cdv_sb_write(dev, lane_reg, lane_value);
}
lane_reg = PSB_LANE0;
cdv_sb_read(dev, lane_reg, &lane_value);
lane_value &= ~(LANE_PLL_MASK);
lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
cdv_sb_write(dev, lane_reg, lane_value);
lane_reg = PSB_LANE1;
cdv_sb_read(dev, lane_reg, &lane_value);
lane_value &= ~(LANE_PLL_MASK);
lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
cdv_sb_write(dev, lane_reg, lane_value);
lane_reg = PSB_LANE2;
cdv_sb_read(dev, lane_reg, &lane_value);
lane_value &= ~(LANE_PLL_MASK);
lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
cdv_sb_write(dev, lane_reg, lane_value);
lane_reg = PSB_LANE3;
cdv_sb_read(dev, lane_reg, &lane_value);
lane_value &= ~(LANE_PLL_MASK);
lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
cdv_sb_write(dev, lane_reg, lane_value);
return 0;
}
......
......@@ -356,6 +356,8 @@ static void cdv_intel_lvds_mode_set(struct drm_encoder *encoder,
{
struct drm_device *dev = encoder->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(
encoder->crtc);
u32 pfit_control;
/*
......@@ -377,6 +379,8 @@ static void cdv_intel_lvds_mode_set(struct drm_encoder *encoder,
else
pfit_control = 0;
pfit_control |= psb_intel_crtc->pipe << PFIT_PIPE_SHIFT;
if (dev_priv->lvds_dither)
pfit_control |= PANEL_8TO6_DITHER_ENABLE;
......@@ -767,6 +771,19 @@ void cdv_intel_lvds_init(struct drm_device *dev,
goto failed_find;
}
/* setup PWM */
{
u32 pwm;
pwm = REG_READ(BLC_PWM_CTL2);
if (pipe == 1)
pwm |= PWM_PIPE_B;
else
pwm &= ~PWM_PIPE_B;
pwm |= PWM_ENABLE;
REG_WRITE(BLC_PWM_CTL2, pwm);
}
out:
drm_sysfs_connector_add(connector);
return;
......
......@@ -748,10 +748,7 @@ static void psb_setup_outputs(struct drm_device *dev)
clone_mask = (1 << INTEL_OUTPUT_SDVO);
break;
case INTEL_OUTPUT_LVDS:
if (IS_MRST(dev))
crtc_mask = (1 << 0);
else
crtc_mask = (1 << 1);
crtc_mask = dev_priv->ops->lvds_mask;
clone_mask = (1 << INTEL_OUTPUT_LVDS);
break;
case INTEL_OUTPUT_MIPI:
......@@ -763,10 +760,7 @@ static void psb_setup_outputs(struct drm_device *dev)
clone_mask = (1 << INTEL_OUTPUT_MIPI2);
break;
case INTEL_OUTPUT_HDMI:
if (IS_MFLD(dev))
crtc_mask = (1 << 1);
else
crtc_mask = (1 << 0);
crtc_mask = dev_priv->ops->hdmi_mask;
clone_mask = (1 << INTEL_OUTPUT_HDMI);
break;
}
......@@ -802,6 +796,9 @@ void psb_modeset_init(struct drm_device *dev)
dev->mode_config.max_height = 2048;
psb_setup_outputs(dev);
if (dev_priv->ops->errata)
dev_priv->ops->errata(dev);
}
void psb_modeset_cleanup(struct drm_device *dev)
......
......@@ -672,6 +672,8 @@ const struct psb_ops mdfld_chip_ops = {
.accel_2d = 0,
.pipes = 3,
.crtcs = 3,
.lvds_mask = (1 << 1);
.hdmi_mask = (1 << 1);
.sgx_offset = MRST_SGX_OFFSET,
.chip_setup = mid_chip_setup,
......
......@@ -487,6 +487,8 @@ const struct psb_ops oaktrail_chip_ops = {
.accel_2d = 1,
.pipes = 2,
.crtcs = 2,
.hdmi_mask = (1 << 0),
.lvds_mask = (1 << 0),
.sgx_offset = MRST_SGX_OFFSET,
.chip_setup = oaktrail_chip_setup,
......
......@@ -308,6 +308,8 @@ const struct psb_ops psb_chip_ops = {
.accel_2d = 1,
.pipes = 2,
.crtcs = 2,
.hdmi_mask = (1 << 0),
.lvds_mask = (1 << 1),
.sgx_offset = PSB_SGX_OFFSET,
.chip_setup = psb_chip_setup,
.chip_teardown = psb_chip_teardown,
......
......@@ -688,6 +688,8 @@ struct psb_ops {
int pipes; /* Number of output pipes */
int crtcs; /* Number of CRTCs */
int sgx_offset; /* Base offset of SGX device */
int hdmi_mask; /* Mask of HDMI CRTCs */
int lvds_mask; /* Mask of LVDS CRTCs */
/* Sub functions */
struct drm_crtc_helper_funcs const *crtc_helper;
......@@ -696,6 +698,8 @@ struct psb_ops {
/* Setup hooks */
int (*chip_setup)(struct drm_device *dev);
void (*chip_teardown)(struct drm_device *dev);
/* Optional helper caller after modeset */
void (*errata)(struct drm_device *dev);
/* Display management hooks */
int (*output_init)(struct drm_device *dev);
......
......@@ -91,6 +91,9 @@
#define BLC_PWM_CTL 0x61254
#define BLC_PWM_CTL2 0x61250
#define PWM_ENABLE (1 << 31)
#define PWM_LEGACY_MODE (1 << 30)
#define PWM_PIPE_B (1 << 29)
#define BLC_PWM_CTL_C 0x62254
#define BLC_PWM_CTL2_C 0x62250
#define BACKLIGHT_MODULATION_FREQ_SHIFT (17)
......@@ -1338,6 +1341,7 @@ No status bits are changed.
#define LANE_PLL_MASK (0x7 << 20)
#define LANE_PLL_ENABLE (0x3 << 20)
#define LANE_PLL_PIPE(p) (((p) == 0) ? (1 << 21) : (0 << 21))
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment