Commit d28d6d2e authored by Horatiu Vultur's avatar Horatiu Vultur Committed by David S. Miller

net: lan966x: add port module support

This patch adds support for netdev and phylink in the switch. The
injection + extraction is register based. This will be replaced with DMA
accees.
Signed-off-by: default avatarHoratiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent db8bcaad
......@@ -5,4 +5,4 @@
obj-$(CONFIG_LAN966X_SWITCH) += lan966x-switch.o
lan966x-switch-objs := lan966x_main.o
lan966x-switch-objs := lan966x_main.o lan966x_phylink.o lan966x_port.o
/* SPDX-License-Identifier: GPL-2.0+ */
#ifndef __LAN966X_IFH_H__
#define __LAN966X_IFH_H__
/* Fields with description (*) should just be cleared upon injection
* IFH is transmitted MSByte first (Highest bit pos sent as MSB of first byte)
*/
#define IFH_LEN 7
/* Timestamp for frame */
#define IFH_POS_TIMESTAMP 192
/* Bypass analyzer with a prefilled IFH */
#define IFH_POS_BYPASS 191
/* Masqueraded injection with masq_port defining logical source port */
#define IFH_POS_MASQ 190
/* Masqueraded port number for injection */
#define IFH_POS_MASQ_PORT 186
/* Frame length (*) */
#define IFH_POS_LEN 178
/* Cell filling mode. Full(0),Etype(1), LlctOpt(2), Llct(3) */
#define IFH_POS_WRDMODE 176
/* Frame has 16 bits rtag removed compared to line data */
#define IFH_POS_RTAG48 175
/* Frame has a redundancy tag */
#define IFH_POS_HAS_RED_TAG 174
/* Frame has been cut through forwarded (*) */
#define IFH_POS_CUTTHRU 173
/* Rewriter command */
#define IFH_POS_REW_CMD 163
/* Enable OAM-related rewriting. PDU_TYPE encodes OAM type. */
#define IFH_POS_REW_OAM 162
/* PDU type. Encoding: (0-NONE, 1-Y1731_CCM, 2-MRP_TST, 3-MRP_ITST, 4-DLR_BCN,
* 5-DLR_ADV, 6-RTE_NULL_INJ, 7-IPV4, 8-IPV6, 9-Y1731_NON_CCM).
*/
#define IFH_POS_PDU_TYPE 158
/* Update FCS before transmission */
#define IFH_POS_FCS_UPD 157
/* Classified DSCP value of frame */
#define IFH_POS_DSCP 151
/* Yellow indication */
#define IFH_POS_DP 150
/* Process in RTE/inbound */
#define IFH_POS_RTE_INB_UPDATE 149
/* Number of tags to pop from frame */
#define IFH_POS_POP_CNT 147
/* Number of tags in front of the ethertype */
#define IFH_POS_ETYPE_OFS 145
/* Logical source port of frame (*) */
#define IFH_POS_SRCPORT 141
/* Sequence number in redundancy tag */
#define IFH_POS_SEQ_NUM 120
/* Stagd flag and classified TCI of frame (PCP/DEI/VID) */
#define IFH_POS_TCI 103
/* Classified internal priority for queuing */
#define IFH_POS_QOS_CLASS 100
/* Bit mask with eight cpu copy classses */
#define IFH_POS_CPUQ 92
/* Relearn + learn flags (*) */
#define IFH_POS_LEARN_FLAGS 90
/* SFLOW identifier for frame (0-8: Tx port, 9: Rx sampling, 15: No sampling) */
#define IFH_POS_SFLOW_ID 86
/* Set if an ACL/S2 rule was hit (*).
* Super priority: acl_hit=0 and acl_hit(4)=1.
*/
#define IFH_POS_ACL_HIT 85
/* S2 rule index hit (*) */
#define IFH_POS_ACL_IDX 79
/* ISDX as classified by S1 */
#define IFH_POS_ISDX 71
/* Destination ports for frame */
#define IFH_POS_DSTS 62
/* Storm policer to be applied: None/Uni/Multi/Broad (*) */
#define IFH_POS_FLOOD 60
/* Redundancy tag operation */
#define IFH_POS_SEQ_OP 58
/* Classified internal priority for resourcemgt, tagging etc */
#define IFH_POS_IPV 55
/* Frame is for AFI use */
#define IFH_POS_AFI 54
/* Internal aging value (*) */
#define IFH_POS_AGED 52
/* RTP Identifier */
#define IFH_POS_RTP_ID 42
/* RTP MRPD flow */
#define IFH_POS_RTP_SUBID 41
/* Profinet DataStatus or opcua GroupVersion MSB */
#define IFH_POS_PN_DATA_STATUS 33
/* Profinet transfer status (1 iff the status is 0) */
#define IFH_POS_PN_TRANSF_STATUS_ZERO 32
/* Profinet cycle counter or opcua NetworkMessageNumber */
#define IFH_POS_PN_CC 16
#define IFH_WID_TIMESTAMP 32
#define IFH_WID_BYPASS 1
#define IFH_WID_MASQ 1
#define IFH_WID_MASQ_PORT 4
#define IFH_WID_LEN 14
#define IFH_WID_WRDMODE 2
#define IFH_WID_RTAG48 1
#define IFH_WID_HAS_RED_TAG 1
#define IFH_WID_CUTTHRU 1
#define IFH_WID_REW_CMD 10
#define IFH_WID_REW_OAM 1
#define IFH_WID_PDU_TYPE 4
#define IFH_WID_FCS_UPD 1
#define IFH_WID_DSCP 6
#define IFH_WID_DP 1
#define IFH_WID_RTE_INB_UPDATE 1
#define IFH_WID_POP_CNT 2
#define IFH_WID_ETYPE_OFS 2
#define IFH_WID_SRCPORT 4
#define IFH_WID_SEQ_NUM 16
#define IFH_WID_TCI 17
#define IFH_WID_QOS_CLASS 3
#define IFH_WID_CPUQ 8
#define IFH_WID_LEARN_FLAGS 2
#define IFH_WID_SFLOW_ID 4
#define IFH_WID_ACL_HIT 1
#define IFH_WID_ACL_IDX 6
#define IFH_WID_ISDX 8
#define IFH_WID_DSTS 9
#define IFH_WID_FLOOD 2
#define IFH_WID_SEQ_OP 2
#define IFH_WID_IPV 3
#define IFH_WID_AFI 1
#define IFH_WID_AGED 2
#define IFH_WID_RTP_ID 10
#define IFH_WID_RTP_SUBID 1
#define IFH_WID_PN_DATA_STATUS 8
#define IFH_WID_PN_TRANSF_STATUS_ZERO 1
#define IFH_WID_PN_CC 16
#endif /* __LAN966X_IFH_H__ */
......@@ -3,7 +3,12 @@
#ifndef __LAN966X_MAIN_H__
#define __LAN966X_MAIN_H__
#include <linux/etherdevice.h>
#include <linux/phy.h>
#include <linux/phylink.h>
#include "lan966x_regs.h"
#include "lan966x_ifh.h"
#define LAN966X_BUFFER_CELL_SZ 64
#define LAN966X_BUFFER_MEMORY (160 * 1024)
......@@ -27,6 +32,7 @@
#define PGID_MCIPV6 (PGID_AGGR - 1)
#define LAN966X_SPEED_NONE 0
#define LAN966X_SPEED_2500 1
#define LAN966X_SPEED_1000 1
#define LAN966X_SPEED_100 2
#define LAN966X_SPEED_10 3
......@@ -44,15 +50,47 @@ struct lan966x {
void __iomem *regs[NUM_TARGETS];
int shared_queue_sz;
/* interrupts */
int xtr_irq;
};
struct lan966x_port_config {
phy_interface_t portmode;
const unsigned long *advertising;
int speed;
int duplex;
u32 pause;
bool inband;
bool autoneg;
};
struct lan966x_port {
struct net_device *dev;
struct lan966x *lan966x;
u8 chip_port;
u16 pvid;
struct phylink_config phylink_config;
struct phylink_pcs phylink_pcs;
struct lan966x_port_config config;
struct phylink *phylink;
struct phy *serdes;
struct fwnode_handle *fwnode;
};
extern const struct phylink_mac_ops lan966x_phylink_mac_ops;
extern const struct phylink_pcs_ops lan966x_phylink_pcs_ops;
void lan966x_port_config_down(struct lan966x_port *port);
void lan966x_port_config_up(struct lan966x_port *port);
void lan966x_port_status_get(struct lan966x_port *port,
struct phylink_link_state *state);
int lan966x_port_pcs_set(struct lan966x_port *port,
struct lan966x_port_config *config);
void lan966x_port_init(struct lan966x_port *port);
static inline void __iomem *lan_addr(void __iomem *base[],
int id, int tinst, int tcnt,
int gbase, int ginst,
......
// SPDX-License-Identifier: GPL-2.0+
#include <linux/module.h>
#include <linux/phylink.h>
#include <linux/device.h>
#include <linux/netdevice.h>
#include <linux/phy/phy.h>
#include <linux/sfp.h>
#include "lan966x_main.h"
static void lan966x_phylink_mac_config(struct phylink_config *config,
unsigned int mode,
const struct phylink_link_state *state)
{
}
static int lan966x_phylink_mac_prepare(struct phylink_config *config,
unsigned int mode,
phy_interface_t iface)
{
struct lan966x_port *port = netdev_priv(to_net_dev(config->dev));
int err;
if (port->serdes) {
err = phy_set_mode_ext(port->serdes, PHY_MODE_ETHERNET,
iface);
if (err) {
netdev_err(to_net_dev(config->dev),
"Could not set mode of SerDes\n");
return err;
}
}
return 0;
}
static void lan966x_phylink_mac_link_up(struct phylink_config *config,
struct phy_device *phy,
unsigned int mode,
phy_interface_t interface,
int speed, int duplex,
bool tx_pause, bool rx_pause)
{
struct lan966x_port *port = netdev_priv(to_net_dev(config->dev));
struct lan966x_port_config *port_config = &port->config;
port_config->duplex = duplex;
port_config->speed = speed;
port_config->pause = 0;
port_config->pause |= tx_pause ? MLO_PAUSE_TX : 0;
port_config->pause |= rx_pause ? MLO_PAUSE_RX : 0;
lan966x_port_config_up(port);
}
static void lan966x_phylink_mac_link_down(struct phylink_config *config,
unsigned int mode,
phy_interface_t interface)
{
struct lan966x_port *port = netdev_priv(to_net_dev(config->dev));
struct lan966x *lan966x = port->lan966x;
lan966x_port_config_down(port);
/* Take PCS out of reset */
lan_rmw(DEV_CLOCK_CFG_PCS_RX_RST_SET(0) |
DEV_CLOCK_CFG_PCS_TX_RST_SET(0),
DEV_CLOCK_CFG_PCS_RX_RST |
DEV_CLOCK_CFG_PCS_TX_RST,
lan966x, DEV_CLOCK_CFG(port->chip_port));
}
static struct lan966x_port *lan966x_pcs_to_port(struct phylink_pcs *pcs)
{
return container_of(pcs, struct lan966x_port, phylink_pcs);
}
static void lan966x_pcs_get_state(struct phylink_pcs *pcs,
struct phylink_link_state *state)
{
struct lan966x_port *port = lan966x_pcs_to_port(pcs);
lan966x_port_status_get(port, state);
}
static int lan966x_pcs_config(struct phylink_pcs *pcs,
unsigned int mode,
phy_interface_t interface,
const unsigned long *advertising,
bool permit_pause_to_mac)
{
struct lan966x_port *port = lan966x_pcs_to_port(pcs);
struct lan966x_port_config config;
int ret;
config = port->config;
config.portmode = interface;
config.inband = phylink_autoneg_inband(mode);
config.autoneg = phylink_test(advertising, Autoneg);
config.advertising = advertising;
ret = lan966x_port_pcs_set(port, &config);
if (ret)
netdev_err(port->dev, "port PCS config failed: %d\n", ret);
return ret;
}
static void lan966x_pcs_aneg_restart(struct phylink_pcs *pcs)
{
/* Currently not used */
}
const struct phylink_mac_ops lan966x_phylink_mac_ops = {
.validate = phylink_generic_validate,
.mac_config = lan966x_phylink_mac_config,
.mac_prepare = lan966x_phylink_mac_prepare,
.mac_link_down = lan966x_phylink_mac_link_down,
.mac_link_up = lan966x_phylink_mac_link_up,
};
const struct phylink_pcs_ops lan966x_phylink_pcs_ops = {
.pcs_get_state = lan966x_pcs_get_state,
.pcs_config = lan966x_pcs_config,
.pcs_an_restart = lan966x_pcs_aneg_restart,
};
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment