Commit d29263df authored by Jarod Wilson's avatar Jarod Wilson Committed by Greg Kroah-Hartman

bonding/802.3ad: fix slave link initialization transition states

[ Upstream commit 33403121 ]

Once in a while, with just the right timing, 802.3ad slaves will fail to
properly initialize, winding up in a weird state, with a partner system
mac address of 00:00:00:00:00:00. This started happening after a fix to
properly track link_failure_count tracking, where an 802.3ad slave that
reported itself as link up in the miimon code, but wasn't able to get a
valid speed/duplex, started getting set to BOND_LINK_FAIL instead of
BOND_LINK_DOWN. That was the proper thing to do for the general "my link
went down" case, but has created a link initialization race that can put
the interface in this odd state.

The simple fix is to instead set the slave link to BOND_LINK_DOWN again,
if the link has never been up (last_link_up == 0), so the link state
doesn't bounce from BOND_LINK_DOWN to BOND_LINK_FAIL -- it hasn't failed
in this case, it simply hasn't been up yet, and this prevents the
unnecessary state change from DOWN to FAIL and getting stuck in an init
failure w/o a partner mac.

Fixes: ea53abfa ("bonding/802.3ad: fix link_failure_count tracking")
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Tested-by: default avatarHeesoon Kim <Heesoon.Kim@stratus.com>
Signed-off-by: default avatarJarod Wilson <jarod@redhat.com>
Acked-by: default avatarJay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 98e4b991
......@@ -3122,13 +3122,18 @@ static int bond_slave_netdev_event(unsigned long event,
case NETDEV_CHANGE:
/* For 802.3ad mode only:
* Getting invalid Speed/Duplex values here will put slave
* in weird state. So mark it as link-fail for the time
* being and let link-monitoring (miimon) set it right when
* correct speeds/duplex are available.
* in weird state. Mark it as link-fail if the link was
* previously up or link-down if it hasn't yet come up, and
* let link-monitoring (miimon) set it right when correct
* speeds/duplex are available.
*/
if (bond_update_speed_duplex(slave) &&
BOND_MODE(bond) == BOND_MODE_8023AD)
slave->link = BOND_LINK_FAIL;
BOND_MODE(bond) == BOND_MODE_8023AD) {
if (slave->last_link_up)
slave->link = BOND_LINK_FAIL;
else
slave->link = BOND_LINK_DOWN;
}
if (BOND_MODE(bond) == BOND_MODE_8023AD)
bond_3ad_adapter_speed_duplex_changed(slave);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment