Merge branch 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

 - new drivers for Spreadtrum I2C, Intel Cherry Trail Whiskey Cove SMBUS

 - quite some driver updates

 - cleanups for the i2c-mux subsystem

 - some subsystem-wide constification

 - further cleanup of include/linux/i2c

* 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
  i2c: sprd: Fix undefined reference errors
  i2c: nomadik: constify amba_id
  i2c: versatile: Make i2c_algo_bit_data const
  i2c: busses: make i2c_adapter_quirks const
  i2c: busses: make i2c_adapter const
  i2c: busses: make i2c_algorithm const
  i2c: Add Spreadtrum I2C controller driver
  dt-bindings: i2c: Add Spreadtrum I2C controller documentation
  i2c-cht-wc: make cht_wc_i2c_adap_driver static
  MAINTAINERS: Add entry for drivers/i2c/busses/i2c-cht-wc.c
  i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency
  dt-bindings: i2c: eeprom: Document vendor to be used and deprecated ones
  i2c: i801: Restore the presence state of P2SB PCI device after reading BAR
  MAINTAINERS: drop entry for Blackfin I2C and Sonic's email
  blackfin: merge the two TWI header files
  i2c: davinci: Preserve return value of devm_clk_get
  i2c: mediatek: Add i2c compatible for MediaTek MT7622
  dt-bindings: i2c: Add MediaTek MT7622 i2c binding
  dt-bindings: i2c: modify information formats
  i2c: mux: i2c-arb-gpio-challenge: allow compiling w/o OF support
  ...

Documentation/devicetree/bindings/eeprom/eeprom.txt

@@ -16,8 +16,12 @@ Required properties:
 
 	"renesas,r1ex24002"
 
+	The following manufacturers values have been deprecated:
+	"at", "at24"
+
 	 If there is no specific driver for <manufacturer>, a generic
-	 driver based on <type> is selected. Possible types are:
+	 device with <type> and manufacturer "atmel" should be used.
+	 Possible types are:
 	 "24c00", "24c01", "24c02", "24c04", "24c08", "24c16", "24c32", "24c64",
 	 "24c128", "24c256", "24c512", "24c1024", "spd"
 

Documentation/devicetree/bindings/i2c/i2c-mtk.txt

-* Mediatek's I2C controller
+* MediaTek's I2C controller
 
-The Mediatek's I2C controller is used to interface with I2C devices.
+The MediaTek's I2C controller is used to interface with I2C devices.
 
 Required properties:
   - compatible: value should be either of the following.
-      "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for Mediatek mt2701
-      "mediatek,mt6577-i2c": for i2c compatible with mt6577.
-      "mediatek,mt6589-i2c": for i2c compatible with mt6589.
-      "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for i2c compatible with mt7623.
-      "mediatek,mt8173-i2c": for i2c compatible with mt8173.
+      "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701
+      "mediatek,mt6577-i2c": for MediaTek MT6577
+      "mediatek,mt6589-i2c": for MediaTek MT6589
+      "mediatek,mt7622-i2c": for MediaTek MT7622
+      "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
+      "mediatek,mt8173-i2c": for MediaTek MT8173
   - reg: physical base address of the controller and dma base, length of memory
     mapped region.
   - interrupts: interrupt number to the cpu.

Documentation/devicetree/bindings/i2c/i2c-rcar.txt

@@ -2,6 +2,8 @@ I2C for R-Car platforms
 
 Required properties:
 - compatible:
+	"renesas,i2c-r8a7743" if the device is a part of a R8A7743 SoC.
+	"renesas,i2c-r8a7745" if the device is a part of a R8A7745 SoC.
 	"renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC.
 	"renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC.
 	"renesas,i2c-r8a7790" if the device is a part of a R8A7790 SoC.
@@ -12,7 +14,8 @@ Required properties:
 	"renesas,i2c-r8a7795" if the device is a part of a R8A7795 SoC.
 	"renesas,i2c-r8a7796" if the device is a part of a R8A7796 SoC.
 	"renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device.
-	"renesas,rcar-gen2-i2c" for a generic R-Car Gen2 compatible device.
+	"renesas,rcar-gen2-i2c" for a generic R-Car Gen2 or RZ/G1 compatible
+				device.
 	"renesas,rcar-gen3-i2c" for a generic R-Car Gen3 compatible device.
 	"renesas,i2c-rcar" (deprecated)
 

Documentation/devicetree/bindings/i2c/i2c-rk3x.txt

@@ -7,6 +7,7 @@ Required properties :
 
  - reg : Offset and length of the register set for the device
  - compatible: should be one of the following:
+   - "rockchip,rv1108-i2c": for rv1108
    - "rockchip,rk3066-i2c": for rk3066
    - "rockchip,rk3188-i2c": for rk3188
    - "rockchip,rk3228-i2c": for rk3228

Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt

@@ -4,6 +4,8 @@ Required properties:
 - compatible      :
 			- "renesas,iic-r8a73a4" (R-Mobile APE6)
 			- "renesas,iic-r8a7740" (R-Mobile A1)
+			- "renesas,iic-r8a7743" (RZ/G1M)
+			- "renesas,iic-r8a7745" (RZ/G1E)
 			- "renesas,iic-r8a7790" (R-Car H2)
 			- "renesas,iic-r8a7791" (R-Car M2-W)
 			- "renesas,iic-r8a7792" (R-Car V2H)
@@ -12,7 +14,8 @@ Required properties:
 			- "renesas,iic-r8a7795" (R-Car H3)
 			- "renesas,iic-r8a7796" (R-Car M3-W)
 			- "renesas,iic-sh73a0" (SH-Mobile AG5)
-			- "renesas,rcar-gen2-iic" (generic R-Car Gen2 compatible device)
+			- "renesas,rcar-gen2-iic" (generic R-Car Gen2 or RZ/G1
+							compatible device)
 			- "renesas,rcar-gen3-iic" (generic R-Car Gen3 compatible device)
 			- "renesas,rmobile-iic" (generic device)
 

Documentation/devicetree/bindings/i2c/i2c-sprd.txt

+I2C for Spreadtrum platforms
+
+Required properties:
+- compatible: Should be "sprd,sc9860-i2c".
+- reg: Specify the physical base address of the controller and length
+  of memory mapped region.
+- interrupts: Should contain I2C interrupt.
+- clock-names: Should contain following entries:
+  "i2c" for I2C clock,
+  "source" for I2C source (parent) clock,
+  "enable" for I2C module enable clock.
+- clocks: Should contain a clock specifier for each entry in clock-names.
+- clock-frequency: Constains desired I2C bus clock frequency in Hz.
+- #address-cells: Should be 1 to describe address cells for I2C device address.
+- #size-cells: Should be 0 means no size cell for I2C device address.
+
+Optional properties:
+- Child nodes conforming to I2C bus binding
+
+Examples:
+i2c0: i2c@70500000 {
+	compatible = "sprd,sc9860-i2c";
+	reg = <0 0x70500000 0 0x1000>;
+	interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+	clock-names = "i2c", "source", "enable";
+	clocks = <&clk_i2c3>, <&ext_26m>, <&clk_ap_apb_gates 11>;
+	clock-frequency = <400000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+

Documentation/i2c/i2c-topology

@@ -42,6 +42,10 @@ i2c-arb-gpio-challenge    Parent-locked
 i2c-mux-gpio              Normally parent-locked, mux-locked iff
                           all involved gpio pins are controlled by the
                           same i2c root adapter that they mux.
+i2c-mux-gpmux             Normally parent-locked, mux-locked iff
+                          specified in device-tree.
+i2c-mux-ltc4306           Mux-locked
+i2c-mux-mlxcpld           Parent-locked
 i2c-mux-pca9541           Parent-locked
 i2c-mux-pca954x           Parent-locked
 i2c-mux-pinctrl           Normally parent-locked, mux-locked iff
@@ -50,9 +54,11 @@ i2c-mux-pinctrl           Normally parent-locked, mux-locked iff
 i2c-mux-reg               Parent-locked
 
 In drivers/iio/
+gyro/mpu3050              Mux-locked
 imu/inv_mpu6050/          Mux-locked
 
 In drivers/media/
+dvb-frontends/lgdt3306a   Mux-locked
 dvb-frontends/m88ds3103   Parent-locked
 dvb-frontends/rtl2830     Parent-locked
 dvb-frontends/rtl2832     Mux-locked

MAINTAINERS

@@ -2575,13 +2575,6 @@ W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/net/ethernet/adi/
 
-BLACKFIN I2C TWI DRIVER
-M:	Sonic Zhang <sonic.zhang@analog.com>
-L:	adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
-W:	http://blackfin.uclinux.org/
-S:	Supported
-F:	drivers/i2c/busses/i2c-bfin-twi.c
-
 BLACKFIN MEDIA DRIVER
 M:	Scott Jiang <scott.jiang.linux@gmail.com>
 L:	adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
@@ -2598,14 +2591,12 @@ S:	Supported
 F:	drivers/rtc/rtc-bfin.c
 
 BLACKFIN SDH DRIVER
-M:	Sonic Zhang <sonic.zhang@analog.com>
 L:	adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/mmc/host/bfin_sdh.c
 
 BLACKFIN SERIAL DRIVER
-M:	Sonic Zhang <sonic.zhang@analog.com>
 L:	adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	http://blackfin.uclinux.org
 S:	Supported
@@ -6441,6 +6432,12 @@ F:	drivers/i2c/busses/i2c-sis96x.c
 F:	drivers/i2c/busses/i2c-via.c
 F:	drivers/i2c/busses/i2c-viapro.c
 
+I2C/SMBUS INTEL CHT WHISKEY COVE PMIC DRIVER
+M:	Hans de Goede <hdegoede@redhat.com>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	drivers/i2c/busses/i2c-cht-wc.c
+
 I2C/SMBUS ISMT DRIVER
 M:	Seth Heasley <seth.heasley@intel.com>
 M:	Neil Horman <nhorman@tuxdriver.com>

arch/blackfin/include/asm/bfin_twi.h

 /*
  * bfin_twi.h - interface to Blackfin TWIs
  *
- * Copyright 2005-2010 Analog Devices Inc.
+ * Copyright 2005-2014 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -10,6 +10,138 @@
 #define __ASM_BFIN_TWI_H__
 
 #include <asm/blackfin.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+
+/*
+ * ADI twi registers layout
+ */
+struct bfin_twi_regs {
+	u16 clkdiv;
+	u16 dummy1;
+	u16 control;
+	u16 dummy2;
+	u16 slave_ctl;
+	u16 dummy3;
+	u16 slave_stat;
+	u16 dummy4;
+	u16 slave_addr;
+	u16 dummy5;
+	u16 master_ctl;
+	u16 dummy6;
+	u16 master_stat;
+	u16 dummy7;
+	u16 master_addr;
+	u16 dummy8;
+	u16 int_stat;
+	u16 dummy9;
+	u16 int_mask;
+	u16 dummy10;
+	u16 fifo_ctl;
+	u16 dummy11;
+	u16 fifo_stat;
+	u16 dummy12;
+	u32 __pad[20];
+	u16 xmt_data8;
+	u16 dummy13;
+	u16 xmt_data16;
+	u16 dummy14;
+	u16 rcv_data8;
+	u16 dummy15;
+	u16 rcv_data16;
+	u16 dummy16;
+};
+
+struct bfin_twi_iface {
+	int			irq;
+	spinlock_t		lock;
+	char			read_write;
+	u8			command;
+	u8			*transPtr;
+	int			readNum;
+	int			writeNum;
+	int			cur_mode;
+	int			manual_stop;
+	int			result;
+	struct i2c_adapter	adap;
+	struct completion	complete;
+	struct i2c_msg		*pmsg;
+	int			msg_num;
+	int			cur_msg;
+	u16			saved_clkdiv;
+	u16			saved_control;
+	struct bfin_twi_regs __iomem *regs_base;
+};
+
+/*  ********************  TWO-WIRE INTERFACE (TWI) MASKS  ********************/
+/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y);  ) */
+#define	CLKLOW(x)	((x) & 0xFF)	/* Periods Clock Is Held Low */
+#define CLKHI(y)	(((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
+
+/* TWI_PRESCALE Masks */
+#define	PRESCALE	0x007F	/* SCLKs Per Internal Time Reference (10MHz) */
+#define	TWI_ENA		0x0080	/* TWI Enable */
+#define	SCCB		0x0200	/* SCCB Compatibility Enable */
+
+/* TWI_SLAVE_CTL Masks */
+#define	SEN		0x0001	/* Slave Enable */
+#define	SADD_LEN	0x0002	/* Slave Address Length */
+#define	STDVAL		0x0004	/* Slave Transmit Data Valid */
+#define	NAK		0x0008	/* NAK Generated At Conclusion Of Transfer */
+#define	GEN		0x0010	/* General Call Address Matching Enabled */
+
+/* TWI_SLAVE_STAT Masks	*/
+#define	SDIR		0x0001	/* Slave Transfer Direction (RX/TX*) */
+#define GCALL		0x0002	/* General Call Indicator */
+
+/* TWI_MASTER_CTL Masks	*/
+#define	MEN		0x0001	/* Master Mode Enable          */
+#define	MADD_LEN	0x0002	/* Master Address Length       */
+#define	MDIR		0x0004	/* Master Transmit Direction (RX/TX*) */
+#define	FAST		0x0008	/* Use Fast Mode Timing Specs  */
+#define	STOP		0x0010	/* Issue Stop Condition        */
+#define	RSTART		0x0020	/* Repeat Start or Stop* At End Of Transfer */
+#define	DCNT		0x3FC0	/* Data Bytes To Transfer      */
+#define	SDAOVR		0x4000	/* Serial Data Override        */
+#define	SCLOVR		0x8000	/* Serial Clock Override       */
+
+/* TWI_MASTER_STAT Masks */
+#define	MPROG		0x0001	/* Master Transfer In Progress */
+#define	LOSTARB		0x0002	/* Lost Arbitration Indicator (Xfer Aborted) */
+#define	ANAK		0x0004	/* Address Not Acknowledged    */
+#define	DNAK		0x0008	/* Data Not Acknowledged       */
+#define	BUFRDERR	0x0010	/* Buffer Read Error           */
+#define	BUFWRERR	0x0020	/* Buffer Write Error          */
+#define	SDASEN		0x0040	/* Serial Data Sense           */
+#define	SCLSEN		0x0080	/* Serial Clock Sense          */
+#define	BUSBUSY		0x0100	/* Bus Busy Indicator          */
+
+/* TWI_INT_SRC and TWI_INT_ENABLE Masks	*/
+#define	SINIT		0x0001	/* Slave Transfer Initiated    */
+#define	SCOMP		0x0002	/* Slave Transfer Complete     */
+#define	SERR		0x0004	/* Slave Transfer Error        */
+#define	SOVF		0x0008	/* Slave Overflow              */
+#define	MCOMP		0x0010	/* Master Transfer Complete    */
+#define	MERR		0x0020	/* Master Transfer Error       */
+#define	XMTSERV		0x0040	/* Transmit FIFO Service       */
+#define	RCVSERV		0x0080	/* Receive FIFO Service        */
+
+/* TWI_FIFO_CTRL Masks */
+#define	XMTFLUSH	0x0001	/* Transmit Buffer Flush                 */
+#define	RCVFLUSH	0x0002	/* Receive Buffer Flush                  */
+#define	XMTINTLEN	0x0004	/* Transmit Buffer Interrupt Length      */
+#define	RCVINTLEN	0x0008	/* Receive Buffer Interrupt Length       */
+
+/* TWI_FIFO_STAT Masks */
+#define	XMTSTAT		0x0003	/* Transmit FIFO Status                  */
+#define	XMT_EMPTY	0x0000	/* Transmit FIFO Empty                   */
+#define	XMT_HALF	0x0001	/* Transmit FIFO Has 1 Byte To Write     */
+#define	XMT_FULL	0x0003	/* Transmit FIFO Full (2 Bytes To Write) */
+
+#define	RCVSTAT		0x000C	/* Receive FIFO Status                   */
+#define	RCV_EMPTY	0x0000	/* Receive FIFO Empty                    */
+#define	RCV_HALF	0x0004	/* Receive FIFO Has 1 Byte To Read       */
+#define	RCV_FULL	0x000C	/* Receive FIFO Full (2 Bytes To Read)   */
 
 #define DEFINE_TWI_REG(reg_name, reg) \
 static inline u16 read_##reg_name(struct bfin_twi_iface *iface) \

arch/blackfin/kernel/debug-mmrs.c

@@ -10,7 +10,6 @@
 #include <linux/fs.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/i2c/bfin_twi.h>
 #include <linux/gpio.h>
 
 #include <asm/blackfin.h>

arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c

@@ -11,7 +11,7 @@
  */
 
 #include <linux/gpio.h>
-#include <linux/i2c/tc35876x.h>
+#include <linux/platform_data/tc35876x.h>
 #include <asm/intel-mid.h>
 
 /*tc35876x DSI_LVDS bridge chip and panel platform data*/

drivers/gpu/drm/gma500/tc35876x-dsi-lvds.c

@@ -26,7 +26,7 @@
 #include "mdfld_output.h"
 #include "mdfld_dsi_pkg_sender.h"
 #include "tc35876x-dsi-lvds.h"
-#include <linux/i2c/tc35876x.h>
+#include <linux/platform_data/tc35876x.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <asm/intel_scu_ipc.h>

drivers/i2c/busses/Kconfig

@@ -189,6 +189,14 @@ config I2C_PIIX4
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-piix4.
 
+config I2C_CHT_WC
+	tristate "Intel Cherry Trail Whiskey Cove PMIC smbus controller"
+	depends on INTEL_SOC_PMIC_CHTWC
+	help
+	  If you say yes to this option, support will be included for the
+	  SMBus controller found in the Intel Cherry Trail Whiskey Cove PMIC
+	  found on some Intel Cherry Trail systems.
+
 config I2C_NFORCE2
 	tristate "Nvidia nForce2, nForce3 and nForce4"
 	depends on PCI
@@ -900,6 +908,13 @@ config I2C_SIRF
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-sirf.
 
+config I2C_SPRD
+	bool "Spreadtrum I2C interface"
+	depends on I2C=y && ARCH_SPRD
+	help
+	  If you say yes to this option, support will be included for the
+	  Spreadtrum I2C interface.
+
 config I2C_ST
 	tristate "STMicroelectronics SSC I2C support"
 	depends on ARCH_STI

drivers/i2c/busses/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_I2C_ALI15X3)	+= i2c-ali15x3.o
 obj-$(CONFIG_I2C_AMD756)	+= i2c-amd756.o
 obj-$(CONFIG_I2C_AMD756_S4882)	+= i2c-amd756-s4882.o
 obj-$(CONFIG_I2C_AMD8111)	+= i2c-amd8111.o
+obj-$(CONFIG_I2C_CHT_WC)	+= i2c-cht-wc.o
 obj-$(CONFIG_I2C_I801)		+= i2c-i801.o
 obj-$(CONFIG_I2C_ISCH)		+= i2c-isch.o
 obj-$(CONFIG_I2C_ISMT)		+= i2c-ismt.o
@@ -89,6 +90,7 @@ obj-$(CONFIG_I2C_SH7760)	+= i2c-sh7760.o
 obj-$(CONFIG_I2C_SH_MOBILE)	+= i2c-sh_mobile.o
 obj-$(CONFIG_I2C_SIMTEC)	+= i2c-simtec.o
 obj-$(CONFIG_I2C_SIRF)		+= i2c-sirf.o
+obj-$(CONFIG_I2C_SPRD)		+= i2c-sprd.o
 obj-$(CONFIG_I2C_ST)		+= i2c-st.o
 obj-$(CONFIG_I2C_STM32F4)	+= i2c-stm32f4.o
 obj-$(CONFIG_I2C_STU300)	+= i2c-stu300.o

drivers/i2c/busses/i2c-aspeed.c

@@ -53,6 +53,9 @@
 #define ASPEED_I2CD_MASTER_EN				BIT(0)
 
 /* 0x04 : I2CD Clock and AC Timing Control Register #1 */
+#define ASPEED_I2CD_TIME_TBUF_MASK			GENMASK(31, 28)
+#define ASPEED_I2CD_TIME_THDSTA_MASK			GENMASK(27, 24)
+#define ASPEED_I2CD_TIME_TACST_MASK			GENMASK(23, 20)
 #define ASPEED_I2CD_TIME_SCL_HIGH_SHIFT			16
 #define ASPEED_I2CD_TIME_SCL_HIGH_MASK			GENMASK(19, 16)
 #define ASPEED_I2CD_TIME_SCL_LOW_SHIFT			12
@@ -132,6 +135,7 @@ struct aspeed_i2c_bus {
 	/* Synchronizes I/O mem access to base. */
 	spinlock_t			lock;
 	struct completion		cmd_complete;
+	u32				(*get_clk_reg_val)(u32 divisor);
 	unsigned long			parent_clk_frequency;
 	u32				bus_frequency;
 	/* Transaction state. */
@@ -675,7 +679,7 @@ static const struct i2c_algorithm aspeed_i2c_algo = {
 #endif /* CONFIG_I2C_SLAVE */
 };
 
-static u32 aspeed_i2c_get_clk_reg_val(u32 divisor)
+static u32 aspeed_i2c_get_clk_reg_val(u32 clk_high_low_max, u32 divisor)
 {
 	u32 base_clk, clk_high, clk_low, tmp;
 
@@ -695,16 +699,22 @@ static u32 aspeed_i2c_get_clk_reg_val(u32 divisor)
 	 * Thus,
 	 *	SCL_freq = APB_freq /
 	 *		((1 << base_clk) * (clk_high + 1 + clk_low + 1))
-	 * The documentation recommends clk_high >= 8 and clk_low >= 7 when
-	 * possible; this last constraint gives us the following solution:
+	 * The documentation recommends clk_high >= clk_high_max / 2 and
+	 * clk_low >= clk_low_max / 2 - 1 when possible; this last constraint
+	 * gives us the following solution:
 	 */
-	base_clk = divisor > 33 ? ilog2((divisor - 1) / 32) + 1 : 0;
-	tmp = divisor / (1 << base_clk);
-	clk_high = tmp / 2 + tmp % 2;
-	clk_low = tmp - clk_high;
+	base_clk = divisor > clk_high_low_max ?
+			ilog2((divisor - 1) / clk_high_low_max) + 1 : 0;
+	tmp = (divisor + (1 << base_clk) - 1) >> base_clk;
+	clk_low = tmp / 2;
+	clk_high = tmp - clk_low;
+
+	if (clk_high)
+		clk_high--;
+
+	if (clk_low)
+		clk_low--;
 
-	clk_high -= 1;
-	clk_low -= 1;
 
 	return ((clk_high << ASPEED_I2CD_TIME_SCL_HIGH_SHIFT)
 		& ASPEED_I2CD_TIME_SCL_HIGH_MASK)
@@ -713,13 +723,35 @@ static u32 aspeed_i2c_get_clk_reg_val(u32 divisor)
 			| (base_clk & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK);
 }
 
+static u32 aspeed_i2c_24xx_get_clk_reg_val(u32 divisor)
+{
+	/*
+	 * clk_high and clk_low are each 3 bits wide, so each can hold a max
+	 * value of 8 giving a clk_high_low_max of 16.
+	 */
+	return aspeed_i2c_get_clk_reg_val(16, divisor);
+}
+
+static u32 aspeed_i2c_25xx_get_clk_reg_val(u32 divisor)
+{
+	/*
+	 * clk_high and clk_low are each 4 bits wide, so each can hold a max
+	 * value of 16 giving a clk_high_low_max of 32.
+	 */
+	return aspeed_i2c_get_clk_reg_val(32, divisor);
+}
+
 /* precondition: bus.lock has been acquired. */
 static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus)
 {
 	u32 divisor, clk_reg_val;
 
-	divisor = bus->parent_clk_frequency / bus->bus_frequency;
-	clk_reg_val = aspeed_i2c_get_clk_reg_val(divisor);
+	divisor = DIV_ROUND_UP(bus->parent_clk_frequency, bus->bus_frequency);
+	clk_reg_val = readl(bus->base + ASPEED_I2C_AC_TIMING_REG1);
+	clk_reg_val &= (ASPEED_I2CD_TIME_TBUF_MASK |
+			ASPEED_I2CD_TIME_THDSTA_MASK |
+			ASPEED_I2CD_TIME_TACST_MASK);
+	clk_reg_val |= bus->get_clk_reg_val(divisor);
 	writel(clk_reg_val, bus->base + ASPEED_I2C_AC_TIMING_REG1);
 	writel(ASPEED_NO_TIMEOUT_CTRL, bus->base + ASPEED_I2C_AC_TIMING_REG2);
 
@@ -778,8 +810,22 @@ static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus)
 	return ret;
 }
 
+static const struct of_device_id aspeed_i2c_bus_of_table[] = {
+	{
+		.compatible = "aspeed,ast2400-i2c-bus",
+		.data = aspeed_i2c_24xx_get_clk_reg_val,
+	},
+	{
+		.compatible = "aspeed,ast2500-i2c-bus",
+		.data = aspeed_i2c_25xx_get_clk_reg_val,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
+
 static int aspeed_i2c_probe_bus(struct platform_device *pdev)
 {
+	const struct of_device_id *match;
 	struct aspeed_i2c_bus *bus;
 	struct clk *parent_clk;
 	struct resource *res;
@@ -809,6 +855,12 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev)
 		bus->bus_frequency = 100000;
 	}
 
+	match = of_match_node(aspeed_i2c_bus_of_table, pdev->dev.of_node);
+	if (!match)
+		bus->get_clk_reg_val = aspeed_i2c_24xx_get_clk_reg_val;
+	else
+		bus->get_clk_reg_val = match->data;
+
 	/* Initialize the I2C adapter */
 	spin_lock_init(&bus->lock);
 	init_completion(&bus->cmd_complete);
@@ -870,13 +922,6 @@ static int aspeed_i2c_remove_bus(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id aspeed_i2c_bus_of_table[] = {
-	{ .compatible = "aspeed,ast2400-i2c-bus", },
-	{ .compatible = "aspeed,ast2500-i2c-bus", },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
-
 static struct platform_driver aspeed_i2c_bus_driver = {
 	.probe		= aspeed_i2c_probe_bus,
 	.remove		= aspeed_i2c_remove_bus,

drivers/i2c/busses/i2c-at91.c

@@ -809,7 +809,7 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
  * The hardware can handle at most two messages concatenated by a
  * repeated start via it's internal address feature.
  */
-static struct i2c_adapter_quirks at91_twi_quirks = {
+static const struct i2c_adapter_quirks at91_twi_quirks = {
 	.flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
 	.max_comb_1st_msg_len = 3,
 };

drivers/i2c/busses/i2c-bcm-iproc.c

@@ -510,8 +510,7 @@ static int bcm_iproc_i2c_remove(struct platform_device *pdev)
 
 static int bcm_iproc_i2c_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct bcm_iproc_i2c_dev *iproc_i2c = platform_get_drvdata(pdev);
+	struct bcm_iproc_i2c_dev *iproc_i2c = dev_get_drvdata(dev);
 
 	/* make sure there's no pending interrupt when we go into suspend */
 	writel(0, iproc_i2c->base + IE_OFFSET);
@@ -526,8 +525,7 @@ static int bcm_iproc_i2c_suspend(struct device *dev)
 
 static int bcm_iproc_i2c_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct bcm_iproc_i2c_dev *iproc_i2c = platform_get_drvdata(pdev);
+	struct bcm_iproc_i2c_dev *iproc_i2c = dev_get_drvdata(dev);
 	int ret;
 	u32 val;
 

drivers/i2c/busses/i2c-bfin-twi.c

@@ -21,7 +21,6 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
-#include <linux/i2c/bfin_twi.h>
 
 #include <asm/irq.h>
 #include <asm/portmux.h>

drivers/i2c/busses/i2c-cadence.c

@@ -826,8 +826,7 @@ static int cdns_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long
  */
 static int __maybe_unused cdns_i2c_runtime_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct cdns_i2c *xi2c = platform_get_drvdata(pdev);
+	struct cdns_i2c *xi2c = dev_get_drvdata(dev);
 
 	clk_disable(xi2c->clk);
 
@@ -844,8 +843,7 @@ static int __maybe_unused cdns_i2c_runtime_suspend(struct device *dev)
  */
 static int __maybe_unused cdns_i2c_runtime_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct cdns_i2c *xi2c = platform_get_drvdata(pdev);
+	struct cdns_i2c *xi2c = dev_get_drvdata(dev);
 	int ret;
 
 	ret = clk_enable(xi2c->clk);

drivers/i2c/busses/i2c-cpm.c

@@ -413,7 +413,7 @@ static const struct i2c_algorithm cpm_i2c_algo = {
 };
 
 /* CPM_MAX_READ is also limiting writes according to the code! */
-static struct i2c_adapter_quirks cpm_i2c_quirks = {
+static const struct i2c_adapter_quirks cpm_i2c_quirks = {
 	.max_num_msgs = CPM_MAXBD,
 	.max_read_len = CPM_MAX_READ,
 	.max_write_len = CPM_MAX_READ,

drivers/i2c/busses/i2c-davinci.c

@@ -733,7 +733,7 @@ static inline void i2c_davinci_cpufreq_deregister(struct davinci_i2c_dev *dev)
 }
 #endif
 
-static struct i2c_algorithm i2c_davinci_algo = {
+static const struct i2c_algorithm i2c_davinci_algo = {
 	.master_xfer	= i2c_davinci_xfer,
 	.functionality	= i2c_davinci_func,
 };
@@ -801,7 +801,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 
 	dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(dev->clk))
-		return -ENODEV;
+		return PTR_ERR(dev->clk);
 	clk_prepare_enable(dev->clk);
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -876,8 +876,7 @@ static int davinci_i2c_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int davinci_i2c_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct davinci_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+	struct davinci_i2c_dev *i2c_dev = dev_get_drvdata(dev);
 
 	/* put I2C into reset */
 	davinci_i2c_reset_ctrl(i2c_dev, 0);
@@ -888,8 +887,7 @@ static int davinci_i2c_suspend(struct device *dev)
 
 static int davinci_i2c_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct davinci_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+	struct davinci_i2c_dev *i2c_dev = dev_get_drvdata(dev);
 
 	clk_prepare_enable(i2c_dev->clk);
 	/* take I2C out of reset */

drivers/i2c/busses/i2c-designware-platdrv.c

@@ -439,8 +439,7 @@ static void dw_i2c_plat_complete(struct device *dev)
 #ifdef CONFIG_PM
 static int dw_i2c_plat_runtime_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
+	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
 
 	i_dev->disable(i_dev);
 	i2c_dw_plat_prepare_clk(i_dev, false);
@@ -450,8 +449,7 @@ static int dw_i2c_plat_runtime_suspend(struct device *dev)
 
 static int dw_i2c_plat_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
+	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
 
 	i2c_dw_plat_prepare_clk(i_dev, true);
 	i_dev->init(i_dev);

drivers/i2c/busses/i2c-designware-slave.c

@@ -346,7 +346,7 @@ static irqreturn_t i2c_dw_isr_slave(int this_irq, void *dev_id)
 	return IRQ_RETVAL(ret);
 }
 
-static struct i2c_algorithm i2c_dw_algo = {
+static const struct i2c_algorithm i2c_dw_algo = {
 	.functionality = i2c_dw_func,
 	.reg_slave = i2c_dw_reg_slave,
 	.unreg_slave = i2c_dw_unreg_slave,

drivers/i2c/busses/i2c-exynos5.c

@@ -803,8 +803,7 @@ static int exynos5_i2c_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM_SLEEP
 static int exynos5_i2c_suspend_noirq(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct exynos5_i2c *i2c = platform_get_drvdata(pdev);
+	struct exynos5_i2c *i2c = dev_get_drvdata(dev);
 
 	i2c->suspended = 1;
 
@@ -815,8 +814,7 @@ static int exynos5_i2c_suspend_noirq(struct device *dev)
 
 static int exynos5_i2c_resume_noirq(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct exynos5_i2c *i2c = platform_get_drvdata(pdev);
+	struct exynos5_i2c *i2c = dev_get_drvdata(dev);
 	int ret = 0;
 
 	ret = clk_prepare_enable(i2c->clk);

drivers/i2c/busses/i2c-gpio.c

@@ -98,8 +98,8 @@ static int of_i2c_gpio_get_pins(struct device_node *np,
 		return -EPROBE_DEFER;
 
 	if (!gpio_is_valid(*sda_pin) || !gpio_is_valid(*scl_pin)) {
-		pr_err("%s: invalid GPIO pins, sda=%d/scl=%d\n",
-		       np->full_name, *sda_pin, *scl_pin);
+		pr_err("%pOF: invalid GPIO pins, sda=%d/scl=%d\n",
+		       np, *sda_pin, *scl_pin);
 		return -ENODEV;
 	}
 

drivers/i2c/busses/i2c-hix5hd2.c

@@ -505,8 +505,7 @@ static int hix5hd2_i2c_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int hix5hd2_i2c_runtime_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct hix5hd2_i2c_priv *priv = platform_get_drvdata(pdev);
+	struct hix5hd2_i2c_priv *priv = dev_get_drvdata(dev);
 
 	clk_disable_unprepare(priv->clk);
 
@@ -515,8 +514,7 @@ static int hix5hd2_i2c_runtime_suspend(struct device *dev)
 
 static int hix5hd2_i2c_runtime_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct hix5hd2_i2c_priv *priv = platform_get_drvdata(pdev);
+	struct hix5hd2_i2c_priv *priv = dev_get_drvdata(dev);
 
 	clk_prepare_enable(priv->clk);
 	hix5hd2_i2c_init(priv);

drivers/i2c/busses/i2c-i801.c

@@ -1332,6 +1332,7 @@ static void i801_add_tco(struct i801_priv *priv)
 	u32 tco_base, tco_ctl;
 	u32 base_addr, ctrl_val;
 	u64 base64_addr;
+	u8 hidden;
 
 	if (!(priv->features & FEATURE_TCO))
 		return;
@@ -1376,8 +1377,10 @@ static void i801_add_tco(struct i801_priv *priv)
 
 	devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 1);
 
-	/* Unhide the P2SB device */
-	pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, 0x0);
+	/* Unhide the P2SB device, if it is hidden */
+	pci_bus_read_config_byte(pci_dev->bus, devfn, 0xe1, &hidden);
+	if (hidden)
+		pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, 0x0);
 
 	pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR, &base_addr);
 	base64_addr = base_addr & 0xfffffff0;
@@ -1385,8 +1388,9 @@ static void i801_add_tco(struct i801_priv *priv)
 	pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR + 0x4, &base_addr);
 	base64_addr |= (u64)base_addr << 32;
 
-	/* Hide the P2SB device */
-	pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, 0x1);
+	/* Hide the P2SB device, if it was hidden before */
+	if (hidden)
+		pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, hidden);
 	spin_unlock(&p2sb_spinlock);
 
 	res = &tco_res[ICH_RES_MEM_OFF];

drivers/i2c/busses/i2c-kempld.c

@@ -289,7 +289,7 @@ static const struct i2c_algorithm kempld_i2c_algorithm = {
 	.functionality	= kempld_i2c_func,
 };
 
-static struct i2c_adapter kempld_i2c_adapter = {
+static const struct i2c_adapter kempld_i2c_adapter = {
 	.owner		= THIS_MODULE,
 	.name		= "i2c-kempld",
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,

drivers/i2c/busses/i2c-lpc2k.c

@@ -457,8 +457,7 @@ static int i2c_lpc2k_remove(struct platform_device *dev)
 #ifdef CONFIG_PM
 static int i2c_lpc2k_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct lpc2k_i2c *i2c = platform_get_drvdata(pdev);
+	struct lpc2k_i2c *i2c = dev_get_drvdata(dev);
 
 	clk_disable(i2c->clk);
 
@@ -467,8 +466,7 @@ static int i2c_lpc2k_suspend(struct device *dev)
 
 static int i2c_lpc2k_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct lpc2k_i2c *i2c = platform_get_drvdata(pdev);
+	struct lpc2k_i2c *i2c = dev_get_drvdata(dev);
 
 	clk_enable(i2c->clk);
 	i2c_lpc2k_reset(i2c);

drivers/i2c/busses/i2c-mlxcpld.c

@@ -433,7 +433,7 @@ static const struct i2c_algorithm mlxcpld_i2c_algo = {
 	.functionality	= mlxcpld_i2c_func
 };
 
-static struct i2c_adapter_quirks mlxcpld_i2c_quirks = {
+static const struct i2c_adapter_quirks mlxcpld_i2c_quirks = {
 	.flags = I2C_AQ_COMB_WRITE_THEN_READ,
 	.max_read_len = MLXCPLD_I2C_DATA_REG_SZ - MLXCPLD_I2C_MAX_ADDR_LEN,
 	.max_write_len = MLXCPLD_I2C_DATA_REG_SZ,

drivers/i2c/busses/i2c-mt65xx.c

@@ -50,7 +50,6 @@
 #define I2C_FS_START_CON		0x1800
 #define I2C_TIME_CLR_VALUE		0x0000
 #define I2C_TIME_DEFAULT_VALUE		0x0003
-#define I2C_FS_TIME_INIT_VALUE		0x1303
 #define I2C_WRRD_TRANAC_VALUE		0x0002
 #define I2C_RD_TRANAC_VALUE		0x0001
 
@@ -154,6 +153,7 @@ struct mtk_i2c {
 	bool use_push_pull;		/* IO config push-pull mode */
 
 	u16 irq_stat;			/* interrupt status */
+	unsigned int clk_src_div;
 	unsigned int speed_hz;		/* The speed in transfer */
 	enum mtk_trans_op op;
 	u16 timing_reg;
@@ -172,6 +172,10 @@ static const struct i2c_adapter_quirks mt6577_i2c_quirks = {
 	.max_comb_2nd_msg_len = 31,
 };
 
+static const struct i2c_adapter_quirks mt7622_i2c_quirks = {
+	.max_num_msgs = 255,
+};
+
 static const struct mtk_i2c_compatible mt6577_compat = {
 	.quirks = &mt6577_i2c_quirks,
 	.pmic_i2c = 0,
@@ -190,6 +194,15 @@ static const struct mtk_i2c_compatible mt6589_compat = {
 	.support_33bits = 0,
 };
 
+static const struct mtk_i2c_compatible mt7622_compat = {
+	.quirks = &mt7622_i2c_quirks,
+	.pmic_i2c = 0,
+	.dcm = 1,
+	.auto_restart = 1,
+	.aux_len_reg = 1,
+	.support_33bits = 0,
+};
+
 static const struct mtk_i2c_compatible mt8173_compat = {
 	.pmic_i2c = 0,
 	.dcm = 1,
@@ -201,6 +214,7 @@ static const struct mtk_i2c_compatible mt8173_compat = {
 static const struct of_device_id mtk_i2c_of_match[] = {
 	{ .compatible = "mediatek,mt6577-i2c", .data = &mt6577_compat },
 	{ .compatible = "mediatek,mt6589-i2c", .data = &mt6589_compat },
+	{ .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat },
 	{ .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat },
 	{}
 };
@@ -285,23 +299,20 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
  * less than or equal to i2c->speed_hz. The calculation try to get
  * sample_cnt and step_cn
  */
-static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk,
-			     unsigned int clock_div)
+static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
+				   unsigned int target_speed,
+				   unsigned int *timing_step_cnt,
+				   unsigned int *timing_sample_cnt)
 {
-	unsigned int clk_src;
 	unsigned int step_cnt;
 	unsigned int sample_cnt;
 	unsigned int max_step_cnt;
-	unsigned int target_speed;
 	unsigned int base_sample_cnt = MAX_SAMPLE_CNT_DIV;
 	unsigned int base_step_cnt;
 	unsigned int opt_div;
 	unsigned int best_mul;
 	unsigned int cnt_mul;
 
-	clk_src = parent_clk / clock_div;
-	target_speed = i2c->speed_hz;
-
 	if (target_speed > MAX_HS_MODE_SPEED)
 		target_speed = MAX_HS_MODE_SPEED;
 
@@ -347,16 +358,48 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk,
 		return -EINVAL;
 	}
 
-	step_cnt--;
-	sample_cnt--;
+	*timing_step_cnt = step_cnt - 1;
+	*timing_sample_cnt = sample_cnt - 1;
+
+	return 0;
+}
+
+static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
+{
+	unsigned int clk_src;
+	unsigned int step_cnt;
+	unsigned int sample_cnt;
+	unsigned int target_speed;
+	int ret;
+
+	clk_src = parent_clk / i2c->clk_src_div;
+	target_speed = i2c->speed_hz;
 
 	if (target_speed > MAX_FS_MODE_SPEED) {
+		/* Set master code speed register */
+		ret = mtk_i2c_calculate_speed(i2c, clk_src, MAX_FS_MODE_SPEED,
+					      &step_cnt, &sample_cnt);
+		if (ret < 0)
+			return ret;
+
+		i2c->timing_reg = (sample_cnt << 8) | step_cnt;
+
 		/* Set the high speed mode register */
-		i2c->timing_reg = I2C_FS_TIME_INIT_VALUE;
+		ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
+					      &step_cnt, &sample_cnt);
+		if (ret < 0)
+			return ret;
+
 		i2c->high_speed_reg = I2C_TIME_DEFAULT_VALUE |
 			(sample_cnt << 12) | (step_cnt << 8);
 	} else {
-		i2c->timing_reg = (sample_cnt << 8) | (step_cnt << 0);
+		ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
+					      &step_cnt, &sample_cnt);
+		if (ret < 0)
+			return ret;
+
+		i2c->timing_reg = (sample_cnt << 8) | step_cnt;
+
 		/* Disable the high speed transaction */
 		i2c->high_speed_reg = I2C_TIME_CLR_VALUE;
 	}
@@ -647,8 +690,7 @@ static const struct i2c_algorithm mtk_i2c_algorithm = {
 	.functionality = mtk_i2c_functionality,
 };
 
-static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c,
-			    unsigned int *clk_src_div)
+static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c)
 {
 	int ret;
 
@@ -656,11 +698,11 @@ static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c,
 	if (ret < 0)
 		i2c->speed_hz = I2C_DEFAULT_SPEED;
 
-	ret = of_property_read_u32(np, "clock-div", clk_src_div);
+	ret = of_property_read_u32(np, "clock-div", &i2c->clk_src_div);
 	if (ret < 0)
 		return ret;
 
-	if (*clk_src_div == 0)
+	if (i2c->clk_src_div == 0)
 		return -EINVAL;
 
 	i2c->have_pmic = of_property_read_bool(np, "mediatek,have-pmic");
@@ -676,7 +718,6 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 	int ret = 0;
 	struct mtk_i2c *i2c;
 	struct clk *clk;
-	unsigned int clk_src_div;
 	struct resource *res;
 	int irq;
 
@@ -684,7 +725,7 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 	if (!i2c)
 		return -ENOMEM;
 
-	ret = mtk_i2c_parse_dt(pdev->dev.of_node, i2c, &clk_src_div);
+	ret = mtk_i2c_parse_dt(pdev->dev.of_node, i2c);
 	if (ret)
 		return -EINVAL;
 
@@ -745,7 +786,7 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 
 	strlcpy(i2c->adap.name, I2C_DRV_NAME, sizeof(i2c->adap.name));
 
-	ret = mtk_i2c_set_speed(i2c, clk_get_rate(clk), clk_src_div);
+	ret = mtk_i2c_set_speed(i2c, clk_get_rate(clk));
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to set the speed.\n");
 		return -EINVAL;

drivers/i2c/busses/i2c-mv64xxx.c

@@ -820,7 +820,7 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 		goto out;
 	}
 
-	drv_data->rstc = devm_reset_control_get_optional(dev, NULL);
+	drv_data->rstc = devm_reset_control_get_optional_exclusive(dev, NULL);
 	if (IS_ERR(drv_data->rstc)) {
 		rc = PTR_ERR(drv_data->rstc);
 		goto out;
@@ -975,8 +975,7 @@ mv64xxx_i2c_remove(struct platform_device *dev)
 #ifdef CONFIG_PM
 static int mv64xxx_i2c_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct mv64xxx_i2c_data *drv_data = platform_get_drvdata(pdev);
+	struct mv64xxx_i2c_data *drv_data = dev_get_drvdata(dev);
 
 	mv64xxx_i2c_hw_init(drv_data);
 

drivers/i2c/busses/i2c-nomadik.c

@@ -1088,7 +1088,7 @@ static struct i2c_vendor_data vendor_db8500 = {
 	.fifodepth = 32, /* Guessed from TFTR/RFTR = 15 */
 };
 
-static struct amba_id nmk_i2c_ids[] = {
+static const struct amba_id nmk_i2c_ids[] = {
 	{
 		.id	= 0x00180024,
 		.mask	= 0x00ffffff,

drivers/i2c/busses/i2c-ocores.c

@@ -276,7 +276,7 @@ static const struct i2c_algorithm ocores_algorithm = {
 	.functionality = ocores_func,
 };
 
-static struct i2c_adapter ocores_adapter = {
+static const struct i2c_adapter ocores_adapter = {
 	.owner = THIS_MODULE,
 	.name = "i2c-ocores",
 	.class = I2C_CLASS_DEPRECATED,

drivers/i2c/busses/i2c-octeon-platdrv.c

@@ -126,7 +126,7 @@ static const struct i2c_algorithm octeon_i2c_algo = {
 	.functionality = octeon_i2c_functionality,
 };
 
-static struct i2c_adapter octeon_i2c_ops = {
+static const struct i2c_adapter octeon_i2c_ops = {
 	.owner = THIS_MODULE,
 	.name = "OCTEON adapter",
 	.algo = &octeon_i2c_algo,

drivers/i2c/busses/i2c-opal.c

@@ -204,7 +204,7 @@ static const struct i2c_algorithm i2c_opal_algo = {
  * For two messages, we basically support simple smbus transactions of a
  * write-then-anything.
  */
-static struct i2c_adapter_quirks i2c_opal_quirks = {
+static const struct i2c_adapter_quirks i2c_opal_quirks = {
 	.flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
 	.max_comb_1st_msg_len = 4,
 };

drivers/i2c/busses/i2c-pmcmsp.c

@@ -577,7 +577,7 @@ static u32 pmcmsptwi_i2c_func(struct i2c_adapter *adapter)
 		I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_PROC_CALL;
 }
 
-static struct i2c_adapter_quirks pmcmsptwi_i2c_quirks = {
+static const struct i2c_adapter_quirks pmcmsptwi_i2c_quirks = {
 	.flags = I2C_AQ_COMB_WRITE_THEN_READ,
 	.max_write_len = MSP_MAX_BYTES_PER_RW,
 	.max_read_len = MSP_MAX_BYTES_PER_RW,
@@ -587,7 +587,7 @@ static struct i2c_adapter_quirks pmcmsptwi_i2c_quirks = {
 
 /* -- Initialization -- */
 
-static struct i2c_algorithm pmcmsptwi_algo = {
+static const struct i2c_algorithm pmcmsptwi_algo = {
 	.master_xfer	= pmcmsptwi_master_xfer,
 	.functionality	= pmcmsptwi_i2c_func,
 };

drivers/i2c/busses/i2c-pnx.c

@@ -590,7 +590,7 @@ static u32 i2c_pnx_func(struct i2c_adapter *adapter)
 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
 }
 
-static struct i2c_algorithm pnx_algorithm = {
+static const struct i2c_algorithm pnx_algorithm = {
 	.master_xfer = i2c_pnx_xfer,
 	.functionality = i2c_pnx_func,
 };

drivers/i2c/busses/i2c-powermac.c

@@ -197,7 +197,7 @@ static const struct i2c_algorithm i2c_powermac_algorithm = {
 	.functionality	= i2c_powermac_func,
 };
 
-static struct i2c_adapter_quirks i2c_powermac_quirks = {
+static const struct i2c_adapter_quirks i2c_powermac_quirks = {
 	.max_num_msgs = 1,
 };
 
@@ -234,7 +234,7 @@ static u32 i2c_powermac_get_addr(struct i2c_adapter *adap,
 	else if (!strcmp(node->name, "deq"))
 		return 0x34;
 
-	dev_warn(&adap->dev, "No i2c address for %s\n", node->full_name);
+	dev_warn(&adap->dev, "No i2c address for %pOF\n", node);
 
 	return 0xffffffff;
 }
@@ -315,8 +315,7 @@ static bool i2c_powermac_get_type(struct i2c_adapter *adap,
 		}
 	}
 
-	dev_err(&adap->dev, "i2c-powermac: modalias failure"
-		" on %s\n", node->full_name);
+	dev_err(&adap->dev, "i2c-powermac: modalias failure on %pOF\n", node);
 	return false;
 }
 
@@ -348,8 +347,7 @@ static void i2c_powermac_register_devices(struct i2c_adapter *adap,
 		if (!pmac_i2c_match_adapter(node, adap))
 			continue;
 
-		dev_dbg(&adap->dev, "i2c-powermac: register %s\n",
-			node->full_name);
+		dev_dbg(&adap->dev, "i2c-powermac: register %pOF\n", node);
 
 		/*
 		 * Keep track of some device existence to handle
@@ -372,7 +370,7 @@ static void i2c_powermac_register_devices(struct i2c_adapter *adap,
 		newdev = i2c_new_device(adap, &info);
 		if (!newdev) {
 			dev_err(&adap->dev, "i2c-powermac: Failure to register"
-				" %s\n", node->full_name);
+				" %pOF\n", node);
 			of_node_put(node);
 			/* We do not dispose of the interrupt mapping on
 			 * purpose. It's not necessary (interrupt cannot be

drivers/i2c/busses/i2c-puv3.c

@@ -175,7 +175,7 @@ static u32 puv3_i2c_func(struct i2c_adapter *adapter)
 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
 }
 
-static struct i2c_algorithm puv3_i2c_algorithm = {
+static const struct i2c_algorithm puv3_i2c_algorithm = {
 	.master_xfer	= puv3_i2c_xfer,
 	.functionality	= puv3_i2c_func,
 };

drivers/i2c/busses/i2c-pxa.c

@@ -1346,8 +1346,7 @@ static int i2c_pxa_remove(struct platform_device *dev)
 #ifdef CONFIG_PM
 static int i2c_pxa_suspend_noirq(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct pxa_i2c *i2c = platform_get_drvdata(pdev);
+	struct pxa_i2c *i2c = dev_get_drvdata(dev);
 
 	clk_disable(i2c->clk);
 
@@ -1356,8 +1355,7 @@ static int i2c_pxa_suspend_noirq(struct device *dev)
 
 static int i2c_pxa_resume_noirq(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct pxa_i2c *i2c = platform_get_drvdata(pdev);
+	struct pxa_i2c *i2c = dev_get_drvdata(dev);
 
 	clk_enable(i2c->clk);
 	i2c_pxa_reset(i2c);

drivers/i2c/busses/i2c-qup.c

@@ -1396,7 +1396,7 @@ static const struct i2c_algorithm qup_i2c_algo_v2 = {
  * the end of the read, the length of the read is specified as one byte
  * which limits the possible read to 256 (QUP_READ_LIMIT) bytes.
  */
-static struct i2c_adapter_quirks qup_i2c_quirks = {
+static const struct i2c_adapter_quirks qup_i2c_quirks = {
 	.max_read_len = QUP_READ_LIMIT,
 };
 

drivers/i2c/busses/i2c-rcar.c

@@ -625,9 +625,8 @@ static struct dma_chan *rcar_i2c_request_dma_chan(struct device *dev,
 
 	chan = dma_request_chan(dev, chan_name);
 	if (IS_ERR(chan)) {
-		ret = PTR_ERR(chan);
-		dev_dbg(dev, "request_channel failed for %s (%d)\n",
-			chan_name, ret);
+		dev_dbg(dev, "request_channel failed for %s (%ld)\n",
+			chan_name, PTR_ERR(chan));
 		return chan;
 	}
 

drivers/i2c/busses/i2c-rk3x.c

@@ -1131,6 +1131,11 @@ static const struct i2c_algorithm rk3x_i2c_algorithm = {
 	.functionality		= rk3x_i2c_func,
 };
 
+static const struct rk3x_i2c_soc_data rv1108_soc_data = {
+	.grf_offset = -1,
+	.calc_timings = rk3x_i2c_v1_calc_timings,
+};
+
 static const struct rk3x_i2c_soc_data rk3066_soc_data = {
 	.grf_offset = 0x154,
 	.calc_timings = rk3x_i2c_v0_calc_timings,
@@ -1157,6 +1162,10 @@ static const struct rk3x_i2c_soc_data rk3399_soc_data = {
 };
 
 static const struct of_device_id rk3x_i2c_match[] = {
+	{
+		.compatible = "rockchip,rv1108-i2c",
+		.data = (void *)&rv1108_soc_data
+	},
 	{
 		.compatible = "rockchip,rk3066-i2c",
 		.data = (void *)&rk3066_soc_data

drivers/i2c/busses/i2c-s3c2410.c

@@ -1246,8 +1246,7 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM_SLEEP
 static int s3c24xx_i2c_suspend_noirq(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
+	struct s3c24xx_i2c *i2c = dev_get_drvdata(dev);
 
 	i2c->suspended = 1;
 
@@ -1259,8 +1258,7 @@ static int s3c24xx_i2c_suspend_noirq(struct device *dev)
 
 static int s3c24xx_i2c_resume_noirq(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
+	struct s3c24xx_i2c *i2c = dev_get_drvdata(dev);
 	int ret;
 
 	if (!IS_ERR(i2c->sysreg))

drivers/i2c/busses/i2c-sh_mobile.c

@@ -561,8 +561,8 @@ static struct dma_chan *sh_mobile_i2c_request_dma_chan(struct device *dev,
 
 	chan = dma_request_slave_channel_reason(dev, chan_name);
 	if (IS_ERR(chan)) {
-		ret = PTR_ERR(chan);
-		dev_dbg(dev, "request_channel failed for %s (%d)\n", chan_name, ret);
+		dev_dbg(dev, "request_channel failed for %s (%ld)\n", chan_name,
+			PTR_ERR(chan));
 		return chan;
 	}
 

drivers/i2c/busses/i2c-sirf.c

@@ -421,8 +421,7 @@ static int i2c_sirfsoc_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int i2c_sirfsoc_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct i2c_adapter *adapter = platform_get_drvdata(pdev);
+	struct i2c_adapter *adapter = dev_get_drvdata(dev);
 	struct sirfsoc_i2c *siic = adapter->algo_data;
 
 	clk_enable(siic->clk);
@@ -434,8 +433,7 @@ static int i2c_sirfsoc_suspend(struct device *dev)
 
 static int i2c_sirfsoc_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct i2c_adapter *adapter = platform_get_drvdata(pdev);
+	struct i2c_adapter *adapter = dev_get_drvdata(dev);
 	struct sirfsoc_i2c *siic = adapter->algo_data;
 
 	clk_enable(siic->clk);

drivers/i2c/busses/i2c-st.c

@@ -745,8 +745,7 @@ static int st_i2c_xfer(struct i2c_adapter *i2c_adap,
 #ifdef CONFIG_PM_SLEEP
 static int st_i2c_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct st_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+	struct st_i2c_dev *i2c_dev = dev_get_drvdata(dev);
 
 	if (i2c_dev->busy)
 		return -EBUSY;

drivers/i2c/busses/i2c-stm32f4.c

@@ -751,7 +751,7 @@ static u32 stm32f4_i2c_func(struct i2c_adapter *adap)
 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
 }
 
-static struct i2c_algorithm stm32f4_i2c_algo = {
+static const struct i2c_algorithm stm32f4_i2c_algo = {
 	.master_xfer = stm32f4_i2c_xfer,
 	.functionality = stm32f4_i2c_func,
 };
@@ -798,7 +798,7 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	rst = devm_reset_control_get(&pdev->dev, NULL);
+	rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
 	if (IS_ERR(rst)) {
 		dev_err(&pdev->dev, "Error: Missing controller reset\n");
 		ret = PTR_ERR(rst);

drivers/i2c/busses/i2c-sun6i-p2wi.c

@@ -223,8 +223,8 @@ static int p2wi_probe(struct platform_device *pdev)
 	if (childnp) {
 		ret = of_property_read_u32(childnp, "reg", &slave_addr);
 		if (ret) {
-			dev_err(dev, "invalid slave address on node %s\n",
-				childnp->full_name);
+			dev_err(dev, "invalid slave address on node %pOF\n",
+				childnp);
 			return -EINVAL;
 		}
 
@@ -258,7 +258,7 @@ static int p2wi_probe(struct platform_device *pdev)
 
 	parent_clk_freq = clk_get_rate(p2wi->clk);
 
-	p2wi->rstc = devm_reset_control_get(dev, NULL);
+	p2wi->rstc = devm_reset_control_get_exclusive(dev, NULL);
 	if (IS_ERR(p2wi->rstc)) {
 		ret = PTR_ERR(p2wi->rstc);
 		dev_err(dev, "failed to retrieve reset controller: %d\n", ret);

drivers/i2c/busses/i2c-taos-evm.c

@@ -291,7 +291,7 @@ static void taos_disconnect(struct serio *serio)
 	dev_info(&serio->dev, "Disconnected from TAOS EVM\n");
 }
 
-static struct serio_device_id taos_serio_ids[] = {
+static const struct serio_device_id taos_serio_ids[] = {
 	{
 		.type	= SERIO_RS232,
 		.proto	= SERIO_TAOSEVM,

drivers/i2c/busses/i2c-tegra.c

@@ -793,7 +793,7 @@ static const struct i2c_algorithm tegra_i2c_algo = {
 };
 
 /* payload size is only 12 bit */
-static struct i2c_adapter_quirks tegra_i2c_quirks = {
+static const struct i2c_adapter_quirks tegra_i2c_quirks = {
 	.max_read_len = 4096,
 	.max_write_len = 4096,
 };
@@ -911,7 +911,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	i2c_dev->cont_id = pdev->id;
 	i2c_dev->dev = &pdev->dev;
 
-	i2c_dev->rst = devm_reset_control_get(&pdev->dev, "i2c");
+	i2c_dev->rst = devm_reset_control_get_exclusive(&pdev->dev, "i2c");
 	if (IS_ERR(i2c_dev->rst)) {
 		dev_err(&pdev->dev, "missing controller reset\n");
 		return PTR_ERR(i2c_dev->rst);

drivers/i2c/busses/i2c-thunderx-pcidrv.c

@@ -75,7 +75,7 @@ static const struct i2c_algorithm thunderx_i2c_algo = {
 	.functionality = thunderx_i2c_functionality,
 };
 
-static struct i2c_adapter thunderx_i2c_ops = {
+static const struct i2c_adapter thunderx_i2c_ops = {
 	.owner	= THIS_MODULE,
 	.name	= "ThunderX adapter",
 	.algo	= &thunderx_i2c_algo,

drivers/i2c/busses/i2c-uniphier-f.c

@@ -97,6 +97,7 @@ struct uniphier_fi2c_priv {
 	int error;
 	unsigned int flags;
 	unsigned int busy_cnt;
+	unsigned int clk_cycle;
 };
 
 static void uniphier_fi2c_fill_txfifo(struct uniphier_fi2c_priv *priv,
@@ -461,9 +462,9 @@ static struct i2c_bus_recovery_info uniphier_fi2c_bus_recovery_info = {
 	.unprepare_recovery = uniphier_fi2c_unprepare_recovery,
 };
 
-static void uniphier_fi2c_hw_init(struct uniphier_fi2c_priv *priv,
-				  u32 bus_speed, unsigned long clk_rate)
+static void uniphier_fi2c_hw_init(struct uniphier_fi2c_priv *priv)
 {
+	unsigned int cyc = priv->clk_cycle;
 	u32 tmp;
 
 	tmp = readl(priv->membase + UNIPHIER_FI2C_CR);
@@ -472,12 +473,10 @@ static void uniphier_fi2c_hw_init(struct uniphier_fi2c_priv *priv,
 
 	uniphier_fi2c_reset(priv);
 
-	tmp = clk_rate / bus_speed;
-
-	writel(tmp, priv->membase + UNIPHIER_FI2C_CYC);
-	writel(tmp / 2, priv->membase + UNIPHIER_FI2C_LCTL);
-	writel(tmp / 2, priv->membase + UNIPHIER_FI2C_SSUT);
-	writel(tmp / 16, priv->membase + UNIPHIER_FI2C_DSUT);
+	writel(cyc, priv->membase + UNIPHIER_FI2C_CYC);
+	writel(cyc / 2, priv->membase + UNIPHIER_FI2C_LCTL);
+	writel(cyc / 2, priv->membase + UNIPHIER_FI2C_SSUT);
+	writel(cyc / 16, priv->membase + UNIPHIER_FI2C_DSUT);
 
 	uniphier_fi2c_prepare_operation(priv);
 }
@@ -531,6 +530,7 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
 		goto disable_clk;
 	}
 
+	priv->clk_cycle = clk_rate / bus_speed;
 	init_completion(&priv->comp);
 	priv->adap.owner = THIS_MODULE;
 	priv->adap.algo = &uniphier_fi2c_algo;
@@ -541,7 +541,7 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
 	i2c_set_adapdata(&priv->adap, priv);
 	platform_set_drvdata(pdev, priv);
 
-	uniphier_fi2c_hw_init(priv, bus_speed, clk_rate);
+	uniphier_fi2c_hw_init(priv);
 
 	ret = devm_request_irq(dev, irq, uniphier_fi2c_interrupt, 0,
 			       pdev->name, priv);
@@ -568,6 +568,33 @@ static int uniphier_fi2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int __maybe_unused uniphier_fi2c_suspend(struct device *dev)
+{
+	struct uniphier_fi2c_priv *priv = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static int __maybe_unused uniphier_fi2c_resume(struct device *dev)
+{
+	struct uniphier_fi2c_priv *priv = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	uniphier_fi2c_hw_init(priv);
+
+	return 0;
+}
+
+static const struct dev_pm_ops uniphier_fi2c_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(uniphier_fi2c_suspend, uniphier_fi2c_resume)
+};
+
 static const struct of_device_id uniphier_fi2c_match[] = {
 	{ .compatible = "socionext,uniphier-fi2c" },
 	{ /* sentinel */ }
@@ -580,6 +607,7 @@ static struct platform_driver uniphier_fi2c_drv = {
 	.driver = {
 		.name  = "uniphier-fi2c",
 		.of_match_table = uniphier_fi2c_match,
+		.pm = &uniphier_fi2c_pm_ops,
 	},
 };
 module_platform_driver(uniphier_fi2c_drv);

drivers/i2c/busses/i2c-uniphier.c

@@ -53,6 +53,7 @@ struct uniphier_i2c_priv {
 	void __iomem *membase;
 	struct clk *clk;
 	unsigned int busy_cnt;
+	unsigned int clk_cycle;
 };
 
 static irqreturn_t uniphier_i2c_interrupt(int irq, void *dev_id)
@@ -316,13 +317,13 @@ static struct i2c_bus_recovery_info uniphier_i2c_bus_recovery_info = {
 	.unprepare_recovery = uniphier_i2c_unprepare_recovery,
 };
 
-static void uniphier_i2c_hw_init(struct uniphier_i2c_priv *priv,
-				 u32 bus_speed, unsigned long clk_rate)
+static void uniphier_i2c_hw_init(struct uniphier_i2c_priv *priv)
 {
+	unsigned int cyc = priv->clk_cycle;
+
 	uniphier_i2c_reset(priv, true);
 
-	writel((clk_rate / bus_speed / 2 << 16) | (clk_rate / bus_speed),
-	       priv->membase + UNIPHIER_I2C_CLK);
+	writel((cyc / 2 << 16) | cyc, priv->membase + UNIPHIER_I2C_CLK);
 
 	uniphier_i2c_reset(priv, false);
 }
@@ -376,6 +377,7 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
 		goto disable_clk;
 	}
 
+	priv->clk_cycle = clk_rate / bus_speed;
 	init_completion(&priv->comp);
 	priv->adap.owner = THIS_MODULE;
 	priv->adap.algo = &uniphier_i2c_algo;
@@ -386,7 +388,7 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
 	i2c_set_adapdata(&priv->adap, priv);
 	platform_set_drvdata(pdev, priv);
 
-	uniphier_i2c_hw_init(priv, bus_speed, clk_rate);
+	uniphier_i2c_hw_init(priv);
 
 	ret = devm_request_irq(dev, irq, uniphier_i2c_interrupt, 0, pdev->name,
 			       priv);
@@ -413,6 +415,33 @@ static int uniphier_i2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int __maybe_unused uniphier_i2c_suspend(struct device *dev)
+{
+	struct uniphier_i2c_priv *priv = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static int __maybe_unused uniphier_i2c_resume(struct device *dev)
+{
+	struct uniphier_i2c_priv *priv = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	uniphier_i2c_hw_init(priv);
+
+	return 0;
+}
+
+static const struct dev_pm_ops uniphier_i2c_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(uniphier_i2c_suspend, uniphier_i2c_resume)
+};
+
 static const struct of_device_id uniphier_i2c_match[] = {
 	{ .compatible = "socionext,uniphier-i2c" },
 	{ /* sentinel */ }
@@ -425,6 +454,7 @@ static struct platform_driver uniphier_i2c_drv = {
 	.driver = {
 		.name  = "uniphier-i2c",
 		.of_match_table = uniphier_i2c_match,
+		.pm = &uniphier_i2c_pm_ops,
 	},
 };
 module_platform_driver(uniphier_i2c_drv);

drivers/i2c/busses/i2c-versatile.c

@@ -55,7 +55,7 @@ static int i2c_versatile_getscl(void *data)
 	return !!(readl(i2c->base + I2C_CONTROL) & SCL);
 }
 
-static struct i2c_algo_bit_data i2c_versatile_algo = {
+static const struct i2c_algo_bit_data i2c_versatile_algo = {
 	.setsda	= i2c_versatile_setsda,
 	.setscl = i2c_versatile_setscl,
 	.getsda	= i2c_versatile_getsda,

drivers/i2c/busses/i2c-xiic.c

@@ -721,7 +721,7 @@ static const struct i2c_algorithm xiic_algorithm = {
 	.functionality = xiic_func,
 };
 
-static struct i2c_adapter xiic_adapter = {
+static const struct i2c_adapter xiic_adapter = {
 	.owner = THIS_MODULE,
 	.name = DRIVER_NAME,
 	.class = I2C_CLASS_DEPRECATED,
@@ -853,8 +853,7 @@ MODULE_DEVICE_TABLE(of, xiic_of_match);
 
 static int __maybe_unused cdns_i2c_runtime_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct xiic_i2c *i2c = platform_get_drvdata(pdev);
+	struct xiic_i2c *i2c = dev_get_drvdata(dev);
 
 	clk_disable(i2c->clk);
 
@@ -863,8 +862,7 @@ static int __maybe_unused cdns_i2c_runtime_suspend(struct device *dev)
 
 static int __maybe_unused cdns_i2c_runtime_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct xiic_i2c *i2c = platform_get_drvdata(pdev);
+	struct xiic_i2c *i2c = dev_get_drvdata(dev);
 	int ret;
 
 	ret = clk_enable(i2c->clk);

drivers/i2c/i2c-core-of.c

@@ -32,18 +32,17 @@ static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap,
 	u32 addr;
 	int len;
 
-	dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name);
+	dev_dbg(&adap->dev, "of_i2c: register %pOF\n", node);
 
 	if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
-		dev_err(&adap->dev, "of_i2c: modalias failure on %s\n",
-			node->full_name);
+		dev_err(&adap->dev, "of_i2c: modalias failure on %pOF\n",
+			node);
 		return ERR_PTR(-EINVAL);
 	}
 
 	addr_be = of_get_property(node, "reg", &len);
 	if (!addr_be || (len < sizeof(*addr_be))) {
-		dev_err(&adap->dev, "of_i2c: invalid reg on %s\n",
-			node->full_name);
+		dev_err(&adap->dev, "of_i2c: invalid reg on %pOF\n", node);
 		return ERR_PTR(-EINVAL);
 	}
 
@@ -59,8 +58,8 @@ static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap,
 	}
 
 	if (i2c_check_addr_validity(addr, info.flags)) {
-		dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n",
-			addr, node->full_name);
+		dev_err(&adap->dev, "of_i2c: invalid addr=%x on %pOF\n",
+			addr, node);
 		return ERR_PTR(-EINVAL);
 	}
 
@@ -76,8 +75,7 @@ static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap,
 
 	result = i2c_new_device(adap, &info);
 	if (result == NULL) {
-		dev_err(&adap->dev, "of_i2c: Failure registering %s\n",
-			node->full_name);
+		dev_err(&adap->dev, "of_i2c: Failure registering %pOF\n", node);
 		of_node_put(node);
 		return ERR_PTR(-EINVAL);
 	}
@@ -106,8 +104,8 @@ void of_i2c_register_devices(struct i2c_adapter *adap)
 		client = of_i2c_register_device(adap, node);
 		if (IS_ERR(client)) {
 			dev_warn(&adap->dev,
-				 "Failed to create I2C device for %s\n",
-				 node->full_name);
+				 "Failed to create I2C device for %pOF\n",
+				 node);
 			of_node_clear_flag(node, OF_POPULATED);
 		}
 	}
@@ -243,8 +241,8 @@ static int of_i2c_notify(struct notifier_block *nb, unsigned long action,
 		put_device(&adap->dev);
 
 		if (IS_ERR(client)) {
-			dev_err(&adap->dev, "failed to create client for '%s'\n",
-				 rd->dn->full_name);
+			dev_err(&adap->dev, "failed to create client for '%pOF'\n",
+				 rd->dn);
 			of_node_clear_flag(rd->dn, OF_POPULATED);
 			return notifier_from_errno(PTR_ERR(client));
 		}

drivers/i2c/muxes/Kconfig

@@ -8,7 +8,7 @@ menu "Multiplexer I2C Chip support"
 config I2C_ARB_GPIO_CHALLENGE
 	tristate "GPIO-based I2C arbitration"
 	depends on GPIOLIB || COMPILE_TEST
-	depends on OF
+	depends on OF || COMPILE_TEST
 	help
 	  If you say yes to this option, support will be included for an
 	  I2C multimaster arbitration scheme using GPIOs and a challenge &
@@ -76,6 +76,7 @@ config I2C_MUX_PCA954x
 config I2C_MUX_PINCTRL
 	tristate "pinctrl-based I2C multiplexer"
 	depends on PINCTRL
+	depends on OF || COMPILE_TEST
 	help
 	  If you say yes to this option, support will be included for an I2C
 	  multiplexer that uses the pinctrl subsystem, i.e. pin multiplexing.

drivers/i2c/muxes/i2c-demux-pinctrl.c

@@ -167,8 +167,8 @@ static ssize_t available_masters_show(struct device *dev,
 	int count = 0, i;
 
 	for (i = 0; i < priv->num_chan && count < PAGE_SIZE; i++)
-		count += scnprintf(buf + count, PAGE_SIZE - count, "%d:%s%c",
-				   i, priv->chan[i].parent_np->full_name,
+		count += scnprintf(buf + count, PAGE_SIZE - count, "%d:%pOF%c",
+				   i, priv->chan[i].parent_np,
 				   i == priv->num_chan - 1 ? '\n' : ' ');
 
 	return count;

drivers/i2c/muxes/i2c-mux-mlxcpld.c

@@ -38,9 +38,9 @@
 #include <linux/io.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/platform_data/x86/mlxcpld.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <linux/i2c/mlxcpld.h>
 
 #define CPLD_MUX_MAX_NCHANS	8
 

drivers/i2c/muxes/i2c-mux-pca9541.c

@@ -16,15 +16,14 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/module.h>
-#include <linux/jiffies.h>
 #include <linux/delay.h>
-#include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
-
-#include <linux/i2c/pca954x.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/platform_data/pca954x.h>
+#include <linux/slab.h>
 
 /*
  * The PCA9541 is a bus master selector. It supports two I2C masters connected

drivers/i2c/muxes/i2c-mux-pca954x.c

@@ -39,13 +39,13 @@
 #include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
-#include <linux/i2c/pca954x.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
+#include <linux/platform_data/pca954x.h>
 #include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>

drivers/i2c/muxes/i2c-mux-pinctrl.c

@@ -20,17 +20,14 @@
 #include <linux/i2c-mux.h>
 #include <linux/module.h>
 #include <linux/pinctrl/consumer.h>
-#include <linux/i2c-mux-pinctrl.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/of.h>
 #include "../../pinctrl/core.h"
 
 struct i2c_mux_pinctrl {
-	struct i2c_mux_pinctrl_platform_data *pdata;
 	struct pinctrl *pinctrl;
 	struct pinctrl_state **states;
-	struct pinctrl_state *state_idle;
 };
 
 static int i2c_mux_pinctrl_select(struct i2c_mux_core *muxc, u32 chan)
@@ -42,85 +39,9 @@ static int i2c_mux_pinctrl_select(struct i2c_mux_core *muxc, u32 chan)
 
 static int i2c_mux_pinctrl_deselect(struct i2c_mux_core *muxc, u32 chan)
 {
-	struct i2c_mux_pinctrl *mux = i2c_mux_priv(muxc);
-
-	return pinctrl_select_state(mux->pinctrl, mux->state_idle);
+	return i2c_mux_pinctrl_select(muxc, muxc->num_adapters);
 }
 
-#ifdef CONFIG_OF
-static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
-				    struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-	int num_names, i, ret;
-	struct device_node *adapter_np;
-	struct i2c_adapter *adapter;
-
-	if (!np)
-		return 0;
-
-	mux->pdata = devm_kzalloc(&pdev->dev, sizeof(*mux->pdata), GFP_KERNEL);
-	if (!mux->pdata)
-		return -ENOMEM;
-
-	num_names = of_property_count_strings(np, "pinctrl-names");
-	if (num_names < 0) {
-		dev_err(&pdev->dev, "Cannot parse pinctrl-names: %d\n",
-			num_names);
-		return num_names;
-	}
-
-	mux->pdata->pinctrl_states = devm_kzalloc(&pdev->dev,
-		sizeof(*mux->pdata->pinctrl_states) * num_names,
-		GFP_KERNEL);
-	if (!mux->pdata->pinctrl_states)
-		return -ENOMEM;
-
-	for (i = 0; i < num_names; i++) {
-		ret = of_property_read_string_index(np, "pinctrl-names", i,
-			&mux->pdata->pinctrl_states[mux->pdata->bus_count]);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "Cannot parse pinctrl-names: %d\n",
-				ret);
-			return ret;
-		}
-		if (!strcmp(mux->pdata->pinctrl_states[mux->pdata->bus_count],
-			    "idle")) {
-			if (i != num_names - 1) {
-				dev_err(&pdev->dev,
-					"idle state must be last\n");
-				return -EINVAL;
-			}
-			mux->pdata->pinctrl_state_idle = "idle";
-		} else {
-			mux->pdata->bus_count++;
-		}
-	}
-
-	adapter_np = of_parse_phandle(np, "i2c-parent", 0);
-	if (!adapter_np) {
-		dev_err(&pdev->dev, "Cannot parse i2c-parent\n");
-		return -ENODEV;
-	}
-	adapter = of_find_i2c_adapter_by_node(adapter_np);
-	of_node_put(adapter_np);
-	if (!adapter) {
-		dev_err(&pdev->dev, "Cannot find parent bus\n");
-		return -EPROBE_DEFER;
-	}
-	mux->pdata->parent_bus_num = i2c_adapter_id(adapter);
-	put_device(&adapter->dev);
-
-	return 0;
-}
-#else
-static inline int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
-					   struct platform_device *pdev)
-{
-	return 0;
-}
-#endif
-
 static struct i2c_adapter *i2c_mux_pinctrl_root_adapter(
 	struct pinctrl_state *state)
 {
@@ -141,110 +62,108 @@ static struct i2c_adapter *i2c_mux_pinctrl_root_adapter(
 	return root;
 }
 
+static struct i2c_adapter *i2c_mux_pinctrl_parent_adapter(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct device_node *parent_np;
+	struct i2c_adapter *parent;
+
+	parent_np = of_parse_phandle(np, "i2c-parent", 0);
+	if (!parent_np) {
+		dev_err(dev, "Cannot parse i2c-parent\n");
+		return ERR_PTR(-ENODEV);
+	}
+	parent = of_find_i2c_adapter_by_node(parent_np);
+	of_node_put(parent_np);
+	if (!parent)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	return parent;
+}
+
 static int i2c_mux_pinctrl_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
 	struct i2c_mux_core *muxc;
 	struct i2c_mux_pinctrl *mux;
+	struct i2c_adapter *parent;
 	struct i2c_adapter *root;
-	int i, ret;
-
-	mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL);
-	if (!mux) {
-		ret = -ENOMEM;
-		goto err;
-	}
+	int num_names, i, ret;
+	const char *name;
 
-	mux->pdata = dev_get_platdata(&pdev->dev);
-	if (!mux->pdata) {
-		ret = i2c_mux_pinctrl_parse_dt(mux, pdev);
-		if (ret < 0)
-			goto err;
-	}
-	if (!mux->pdata) {
-		dev_err(&pdev->dev, "Missing platform data\n");
-		ret = -ENODEV;
-		goto err;
+	num_names = of_property_count_strings(np, "pinctrl-names");
+	if (num_names < 0) {
+		dev_err(dev, "Cannot parse pinctrl-names: %d\n",
+			num_names);
+		return num_names;
 	}
 
-	mux->states = devm_kzalloc(&pdev->dev,
-				   sizeof(*mux->states) * mux->pdata->bus_count,
-				   GFP_KERNEL);
-	if (!mux->states) {
-		dev_err(&pdev->dev, "Cannot allocate states\n");
-		ret = -ENOMEM;
-		goto err;
-	}
+	parent = i2c_mux_pinctrl_parent_adapter(dev);
+	if (IS_ERR(parent))
+		return PTR_ERR(parent);
 
-	muxc = i2c_mux_alloc(NULL, &pdev->dev, mux->pdata->bus_count, 0, 0,
-			     i2c_mux_pinctrl_select, NULL);
+	muxc = i2c_mux_alloc(parent, dev, num_names,
+			     sizeof(*mux) + num_names * sizeof(*mux->states),
+			     0, i2c_mux_pinctrl_select, NULL);
 	if (!muxc) {
 		ret = -ENOMEM;
-		goto err;
+		goto err_put_parent;
 	}
-	muxc->priv = mux;
+	mux = i2c_mux_priv(muxc);
+	mux->states = (struct pinctrl_state **)(mux + 1);
 
 	platform_set_drvdata(pdev, muxc);
 
-	mux->pinctrl = devm_pinctrl_get(&pdev->dev);
+	mux->pinctrl = devm_pinctrl_get(dev);
 	if (IS_ERR(mux->pinctrl)) {
 		ret = PTR_ERR(mux->pinctrl);
-		dev_err(&pdev->dev, "Cannot get pinctrl: %d\n", ret);
-		goto err;
+		dev_err(dev, "Cannot get pinctrl: %d\n", ret);
+		goto err_put_parent;
 	}
-	for (i = 0; i < mux->pdata->bus_count; i++) {
-		mux->states[i] = pinctrl_lookup_state(mux->pinctrl,
-						mux->pdata->pinctrl_states[i]);
+
+	for (i = 0; i < num_names; i++) {
+		ret = of_property_read_string_index(np, "pinctrl-names", i,
+						    &name);
+		if (ret < 0) {
+			dev_err(dev, "Cannot parse pinctrl-names: %d\n", ret);
+			goto err_put_parent;
+		}
+
+		mux->states[i] = pinctrl_lookup_state(mux->pinctrl, name);
 		if (IS_ERR(mux->states[i])) {
 			ret = PTR_ERR(mux->states[i]);
-			dev_err(&pdev->dev,
-				"Cannot look up pinctrl state %s: %d\n",
-				mux->pdata->pinctrl_states[i], ret);
-			goto err;
-		}
-	}
-	if (mux->pdata->pinctrl_state_idle) {
-		mux->state_idle = pinctrl_lookup_state(mux->pinctrl,
-						mux->pdata->pinctrl_state_idle);
-		if (IS_ERR(mux->state_idle)) {
-			ret = PTR_ERR(mux->state_idle);
-			dev_err(&pdev->dev,
-				"Cannot look up pinctrl state %s: %d\n",
-				mux->pdata->pinctrl_state_idle, ret);
-			goto err;
+			dev_err(dev, "Cannot look up pinctrl state %s: %d\n",
+				name, ret);
+			goto err_put_parent;
 		}
 
-		muxc->deselect = i2c_mux_pinctrl_deselect;
-	}
+		if (strcmp(name, "idle"))
+			continue;
 
-	muxc->parent = i2c_get_adapter(mux->pdata->parent_bus_num);
-	if (!muxc->parent) {
-		dev_err(&pdev->dev, "Parent adapter (%d) not found\n",
-			mux->pdata->parent_bus_num);
-		ret = -EPROBE_DEFER;
-		goto err;
+		if (i != num_names - 1) {
+			dev_err(dev, "idle state must be last\n");
+			ret = -EINVAL;
+			goto err_put_parent;
+		}
+		muxc->deselect = i2c_mux_pinctrl_deselect;
 	}
 
 	root = i2c_root_adapter(&muxc->parent->dev);
 
 	muxc->mux_locked = true;
-	for (i = 0; i < mux->pdata->bus_count; i++) {
+	for (i = 0; i < num_names; i++) {
 		if (root != i2c_mux_pinctrl_root_adapter(mux->states[i])) {
 			muxc->mux_locked = false;
 			break;
 		}
 	}
-	if (muxc->mux_locked && mux->pdata->pinctrl_state_idle &&
-	    root != i2c_mux_pinctrl_root_adapter(mux->state_idle))
-		muxc->mux_locked = false;
-
 	if (muxc->mux_locked)
-		dev_info(&pdev->dev, "mux-locked i2c mux\n");
+		dev_info(dev, "mux-locked i2c mux\n");
 
-	for (i = 0; i < mux->pdata->bus_count; i++) {
-		u32 bus = mux->pdata->base_bus_num ?
-				(mux->pdata->base_bus_num + i) : 0;
-
-		ret = i2c_mux_add_adapter(muxc, bus, i, 0);
+	/* Do not add any adapter for the idle state (if it's there at all). */
+	for (i = 0; i < num_names - !!muxc->deselect; i++) {
+		ret = i2c_mux_add_adapter(muxc, 0, i, 0);
 		if (ret)
 			goto err_del_adapter;
 	}
@@ -253,8 +172,9 @@ static int i2c_mux_pinctrl_probe(struct platform_device *pdev)
 
 err_del_adapter:
 	i2c_mux_del_adapters(muxc);
-	i2c_put_adapter(muxc->parent);
-err:
+err_put_parent:
+	i2c_put_adapter(parent);
+
 	return ret;
 }
 
@@ -264,16 +184,15 @@ static int i2c_mux_pinctrl_remove(struct platform_device *pdev)
 
 	i2c_mux_del_adapters(muxc);
 	i2c_put_adapter(muxc->parent);
+
 	return 0;
 }
 
-#ifdef CONFIG_OF
 static const struct of_device_id i2c_mux_pinctrl_of_match[] = {
 	{ .compatible = "i2c-mux-pinctrl", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, i2c_mux_pinctrl_of_match);
-#endif
 
 static struct platform_driver i2c_mux_pinctrl_driver = {
 	.driver	= {

include/linux/i2c-mux-pinctrl.h

-/*
- * i2c-mux-pinctrl platform data
- *
- * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef _LINUX_I2C_MUX_PINCTRL_H
-#define _LINUX_I2C_MUX_PINCTRL_H
-
-/**
- * struct i2c_mux_pinctrl_platform_data - Platform data for i2c-mux-pinctrl
- * @parent_bus_num: Parent I2C bus number
- * @base_bus_num: Base I2C bus number for the child busses. 0 for dynamic.
- * @bus_count: Number of child busses. Also the number of elements in
- *	@pinctrl_states
- * @pinctrl_states: The names of the pinctrl state to select for each child bus
- * @pinctrl_state_idle: The pinctrl state to select when no child bus is being
- *	accessed. If NULL, the most recently used pinctrl state will be left
- *	selected.
- */
-struct i2c_mux_pinctrl_platform_data {
-	int parent_bus_num;
-	int base_bus_num;
-	int bus_count;
-	const char **pinctrl_states;
-	const char *pinctrl_state_idle;
-};
-
-#endif

include/linux/i2c/bfin_twi.h

-/*
- * i2c-bfin-twi.h - interface to ADI TWI controller
- *
- * Copyright 2005-2014 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __I2C_BFIN_TWI_H__
-#define __I2C_BFIN_TWI_H__
-
-#include <linux/types.h>
-#include <linux/i2c.h>
-
-/*
- * ADI twi registers layout
- */
-struct bfin_twi_regs {
-	u16 clkdiv;
-	u16 dummy1;
-	u16 control;
-	u16 dummy2;
-	u16 slave_ctl;
-	u16 dummy3;
-	u16 slave_stat;
-	u16 dummy4;
-	u16 slave_addr;
-	u16 dummy5;
-	u16 master_ctl;
-	u16 dummy6;
-	u16 master_stat;
-	u16 dummy7;
-	u16 master_addr;
-	u16 dummy8;
-	u16 int_stat;
-	u16 dummy9;
-	u16 int_mask;
-	u16 dummy10;
-	u16 fifo_ctl;
-	u16 dummy11;
-	u16 fifo_stat;
-	u16 dummy12;
-	u32 __pad[20];
-	u16 xmt_data8;
-	u16 dummy13;
-	u16 xmt_data16;
-	u16 dummy14;
-	u16 rcv_data8;
-	u16 dummy15;
-	u16 rcv_data16;
-	u16 dummy16;
-};
-
-struct bfin_twi_iface {
-	int			irq;
-	spinlock_t		lock;
-	char			read_write;
-	u8			command;
-	u8			*transPtr;
-	int			readNum;
-	int			writeNum;
-	int			cur_mode;
-	int			manual_stop;
-	int			result;
-	struct i2c_adapter	adap;
-	struct completion	complete;
-	struct i2c_msg		*pmsg;
-	int			msg_num;
-	int			cur_msg;
-	u16			saved_clkdiv;
-	u16			saved_control;
-	struct bfin_twi_regs __iomem *regs_base;
-};
-
-/*  ********************  TWO-WIRE INTERFACE (TWI) MASKS  ********************/
-/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y);  ) */
-#define	CLKLOW(x)	((x) & 0xFF)	/* Periods Clock Is Held Low */
-#define CLKHI(y)	(((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
-
-/* TWI_PRESCALE Masks */
-#define	PRESCALE	0x007F	/* SCLKs Per Internal Time Reference (10MHz) */
-#define	TWI_ENA		0x0080	/* TWI Enable */
-#define	SCCB		0x0200	/* SCCB Compatibility Enable */
-
-/* TWI_SLAVE_CTL Masks */
-#define	SEN		0x0001	/* Slave Enable */
-#define	SADD_LEN	0x0002	/* Slave Address Length */
-#define	STDVAL		0x0004	/* Slave Transmit Data Valid */
-#define	NAK		0x0008	/* NAK Generated At Conclusion Of Transfer */
-#define	GEN		0x0010	/* General Call Address Matching Enabled */
-
-/* TWI_SLAVE_STAT Masks	*/
-#define	SDIR		0x0001	/* Slave Transfer Direction (RX/TX*) */
-#define GCALL		0x0002	/* General Call Indicator */
-
-/* TWI_MASTER_CTL Masks	*/
-#define	MEN		0x0001	/* Master Mode Enable          */
-#define	MADD_LEN	0x0002	/* Master Address Length       */
-#define	MDIR		0x0004	/* Master Transmit Direction (RX/TX*) */
-#define	FAST		0x0008	/* Use Fast Mode Timing Specs  */
-#define	STOP		0x0010	/* Issue Stop Condition        */
-#define	RSTART		0x0020	/* Repeat Start or Stop* At End Of Transfer */
-#define	DCNT		0x3FC0	/* Data Bytes To Transfer      */
-#define	SDAOVR		0x4000	/* Serial Data Override        */
-#define	SCLOVR		0x8000	/* Serial Clock Override       */
-
-/* TWI_MASTER_STAT Masks */
-#define	MPROG		0x0001	/* Master Transfer In Progress */
-#define	LOSTARB		0x0002	/* Lost Arbitration Indicator (Xfer Aborted) */
-#define	ANAK		0x0004	/* Address Not Acknowledged    */
-#define	DNAK		0x0008	/* Data Not Acknowledged       */
-#define	BUFRDERR	0x0010	/* Buffer Read Error           */
-#define	BUFWRERR	0x0020	/* Buffer Write Error          */
-#define	SDASEN		0x0040	/* Serial Data Sense           */
-#define	SCLSEN		0x0080	/* Serial Clock Sense          */
-#define	BUSBUSY		0x0100	/* Bus Busy Indicator          */
-
-/* TWI_INT_SRC and TWI_INT_ENABLE Masks	*/
-#define	SINIT		0x0001	/* Slave Transfer Initiated    */
-#define	SCOMP		0x0002	/* Slave Transfer Complete     */
-#define	SERR		0x0004	/* Slave Transfer Error        */
-#define	SOVF		0x0008	/* Slave Overflow              */
-#define	MCOMP		0x0010	/* Master Transfer Complete    */
-#define	MERR		0x0020	/* Master Transfer Error       */
-#define	XMTSERV		0x0040	/* Transmit FIFO Service       */
-#define	RCVSERV		0x0080	/* Receive FIFO Service        */
-
-/* TWI_FIFO_CTRL Masks */
-#define	XMTFLUSH	0x0001	/* Transmit Buffer Flush                 */
-#define	RCVFLUSH	0x0002	/* Receive Buffer Flush                  */
-#define	XMTINTLEN	0x0004	/* Transmit Buffer Interrupt Length      */
-#define	RCVINTLEN	0x0008	/* Receive Buffer Interrupt Length       */
-
-/* TWI_FIFO_STAT Masks */
-#define	XMTSTAT		0x0003	/* Transmit FIFO Status                  */
-#define	XMT_EMPTY	0x0000	/* Transmit FIFO Empty                   */
-#define	XMT_HALF	0x0001	/* Transmit FIFO Has 1 Byte To Write     */
-#define	XMT_FULL	0x0003	/* Transmit FIFO Full (2 Bytes To Write) */
-
-#define	RCVSTAT		0x000C	/* Receive FIFO Status                   */
-#define	RCV_EMPTY	0x0000	/* Receive FIFO Empty                    */
-#define	RCV_HALF	0x0004	/* Receive FIFO Has 1 Byte To Read       */
-#define	RCV_FULL	0x000C	/* Receive FIFO Full (2 Bytes To Read)   */
-
-#endif