Merge tag 'v4.9-next-dts' of https://github.com/mbgg/linux-mediatek into next/dt

- Add bindings for mtk-scpsys for mt2701
- Add clocks for auxadc on mt8173-evb
- Add nodes needed by clock controller for mt2701
- Use clocks from the clock controller for the uart of mt2701

* tag 'v4.9-next-dts' of https://github.com/mbgg/linux-mediatek:
  arm: dts: mt2701: Use real clock for UARTs
  arm: dts: mt2701: Add clock controller device nodes
  arm64: dts: mt8173: Fix auxadc node
  soc: mediatek: Add MT2701 power dt-bindings
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/soc/mediatek/scpsys.txt

@@ -9,17 +9,20 @@ domain control.
 
 The driver implements the Generic PM domain bindings described in
 power/power_domain.txt. It provides the power domains defined in
-include/dt-bindings/power/mt8173-power.h.
+include/dt-bindings/power/mt8173-power.h and mt2701-power.h.
 
 Required properties:
-- compatible: Must be "mediatek,mt8173-scpsys"
+- compatible: Should be one of:
+	- "mediatek,mt2701-scpsys"
+	- "mediatek,mt8173-scpsys"
 - #power-domain-cells: Must be 1
 - reg: Address range of the SCPSYS unit
 - infracfg: must contain a phandle to the infracfg controller
 - clock, clock-names: clocks according to the common clock binding.
-                      The clocks needed "mm", "mfg", "venc" and "venc_lt".
-		      These are the clocks which hardware needs to be enabled
-		      before enabling certain power domains.
+                      These are clocks which hardware needs to be
+                      enabled before enabling certain power domains.
+	Required clocks for MT2701: "mm", "mfg", "ethif"
+	Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt"
 
 Optional properties:
 - vdec-supply: Power supply for the vdec power domain

arch/arm/boot/dts/mt2701.dtsi

@@ -12,8 +12,10 @@
  * GNU General Public License for more details.
  */
 
+#include <dt-bindings/clock/mt2701-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/mt2701-resets.h>
 #include "skeleton64.dtsi"
 #include "mt2701-pinfunc.h"
 
@@ -71,10 +73,18 @@ rtc_clk: dummy32k {
 		#clock-cells = <0>;
 	};
 
-	uart_clk: dummy26m {
+	clk26m: oscillator@0 {
 		compatible = "fixed-clock";
+		#clock-cells = <0>;
 		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	rtc32k: oscillator@1 {
+		compatible = "fixed-clock";
 		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "rtc32k";
 	};
 
 	timer {
@@ -104,6 +114,26 @@ syscfg_pctl_a: syscfg@10005000 {
 		reg = <0 0x10005000 0 0x1000>;
 	};
 
+	topckgen: syscon@10000000 {
+		compatible = "mediatek,mt2701-topckgen", "syscon";
+		reg = <0 0x10000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	infracfg: syscon@10001000 {
+		compatible = "mediatek,mt2701-infracfg", "syscon";
+		reg = <0 0x10001000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pericfg: syscon@10003000 {
+		compatible = "mediatek,mt2701-pericfg", "syscon";
+		reg = <0 0x10003000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
 	watchdog: watchdog@10007000 {
 		compatible = "mediatek,mt2701-wdt",
 			     "mediatek,mt6589-wdt";
@@ -128,6 +158,12 @@ sysirq: interrupt-controller@10200100 {
 		reg = <0 0x10200100 0 0x1c>;
 	};
 
+	apmixedsys: syscon@10209000 {
+		compatible = "mediatek,mt2701-apmixedsys", "syscon";
+		reg = <0 0x10209000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
 	gic: interrupt-controller@10211000 {
 		compatible = "arm,cortex-a7-gic";
 		interrupt-controller;
@@ -144,7 +180,8 @@ uart0: serial@11002000 {
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11002000 0 0x400>;
 		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 
@@ -153,7 +190,8 @@ uart1: serial@11003000 {
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11003000 0 0x400>;
 		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 
@@ -162,7 +200,8 @@ uart2: serial@11004000 {
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11004000 0 0x400>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 
@@ -171,7 +210,8 @@ uart3: serial@11005000 {
 			     "mediatek,mt6577-uart";
 		reg = <0 0x11005000 0 0x400>;
 		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
+		clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+		clock-names = "baud", "bus";
 		status = "disabled";
 	};
 };

arch/arm64/boot/dts/mediatek/mt8173.dtsi

@@ -450,6 +450,9 @@ gic: interrupt-controller@10220000 {
 		auxadc: auxadc@11001000 {
 			compatible = "mediatek,mt8173-auxadc";
 			reg = <0 0x11001000 0 0x1000>;
+			clocks = <&pericfg CLK_PERI_AUXADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
 		};
 
 		uart0: serial@11002000 {

include/dt-bindings/power/mt2701-power.h

+/*
+ * Copyright (C) 2015 MediaTek Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_POWER_MT2701_POWER_H
+#define _DT_BINDINGS_POWER_MT2701_POWER_H
+
+#define MT2701_POWER_DOMAIN_CONN	0
+#define MT2701_POWER_DOMAIN_DISP	1
+#define MT2701_POWER_DOMAIN_MFG		2
+#define MT2701_POWER_DOMAIN_VDEC	3
+#define MT2701_POWER_DOMAIN_ISP		4
+#define MT2701_POWER_DOMAIN_BDP		5
+#define MT2701_POWER_DOMAIN_ETH		6
+#define MT2701_POWER_DOMAIN_HIF		7
+#define MT2701_POWER_DOMAIN_IFR_MSC	8
+
+#endif /* _DT_BINDINGS_POWER_MT2701_POWER_H */