Commit d3036336 authored by Jamie Lentin's avatar Jamie Lentin Committed by Gregory CLEMENT

ARM: dts: orion5x: Configure WNR854T ethernet PHY LEDs

The default PHY configuration disables most of the LEDs. The following
configures the ethernet activity LEDs as Netgear intended.

[gregory.clement@free-electrons.com: fix commit title]
Signed-off-by: default avatarJamie Lentin <jm@lentin.co.uk>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
parent b6114633
......@@ -124,31 +124,82 @@ ports {
port@0 {
reg = <0>;
label = "lan3";
phy-handle = <&lan3phy>;
};
port@1 {
reg = <1>;
label = "lan4";
phy-handle = <&lan4phy>;
};
port@2 {
reg = <2>;
label = "wan";
phy-handle = <&wanphy>;
};
port@3 {
reg = <3>;
label = "cpu";
ethernet = <&ethport>;
};
port@5 {
reg = <5>;
label = "lan1";
phy-handle = <&lan1phy>;
};
port@7 {
reg = <7>;
label = "lan2";
phy-handle = <&lan2phy>;
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
lan3phy: ethernet-phy@0 {
/* Marvell 88E1121R (port 1) */
compatible = "ethernet-phy-id0141.0cb0",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
};
lan4phy: ethernet-phy@1 {
/* Marvell 88E1121R (port 2) */
compatible = "ethernet-phy-id0141.0cb0",
"ethernet-phy-ieee802.3-c22";
reg = <1>;
marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
};
wanphy: ethernet-phy@2 {
/* Marvell 88E1121R (port 1) */
compatible = "ethernet-phy-id0141.0cb0",
"ethernet-phy-ieee802.3-c22";
reg = <2>;
marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
};
lan1phy: ethernet-phy@5 {
/* Marvell 88E1112 */
compatible = "ethernet-phy-id0141.0cb0",
"ethernet-phy-ieee802.3-c22";
reg = <5>;
marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
};
lan2phy: ethernet-phy@7 {
/* Marvell 88E1112 */
compatible = "ethernet-phy-id0141.0cb0",
"ethernet-phy-ieee802.3-c22";
reg = <7>;
marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
};
};
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment