Commit d3591df3 authored by Sascha Hauer's avatar Sascha Hauer Committed by Lee Jones

mfd: dt-bindings: Add bindings for the MediaTek MT6397 PMIC

Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent 6df8dd5c
MediaTek MT6397 Multifunction Device Driver
MT6397 is a multifunction device with the following sub modules:
- Regulator
- RTC
- Audio codec
- GPIO
- Clock
It is interfaced to host controller using SPI interface by a proprietary hardware
called PMIC wrapper or pwrap. MT6397 MFD is a child device of pwrap.
See the following for pwarp node definitions:
Documentation/devicetree/bindings/soc/pwrap.txt
This document describes the binding for MFD device and its sub module.
Required properties:
compatible: "mediatek,mt6397"
Optional subnodes:
- rtc
Required properties:
- compatible: "mediatek,mt6397-rtc"
- regulators
Required properties:
- compatible: "mediatek,mt6397-regulator"
see Documentation/devicetree/bindings/regulator/mt6397-regulator.txt
- codec
Required properties:
- compatible: "mediatek,mt6397-codec"
- clk
Required properties:
- compatible: "mediatek,mt6397-clk"
Example:
pwrap: pwrap@1000f000 {
compatible = "mediatek,mt8135-pwrap";
...
pmic {
compatible = "mediatek,mt6397";
codec: mt6397codec {
compatible = "mediatek,mt6397-codec";
};
regulators {
compatible = "mediatek,mt6397-regulator";
mt6397_vpca15_reg: buck_vpca15 {
regulator-compatible = "buck_vpca15";
regulator-name = "vpca15";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1400000>;
regulator-ramp-delay = <12500>;
regulator-always-on;
};
mt6397_vgp4_reg: ldo_vgp4 {
regulator-compatible = "ldo_vgp4";
regulator-name = "vgp4";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <218>;
};
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment