tsnep: Throttle interrupts
Without interrupt throttling, iperf server mode generates a CPU load of 100% (A53 1.2GHz). Also the throughput suffers with less than 900Mbit/s on a 1Gbit/s link. The reason is a high interrupt load with interrupts every ~20us. Reduce interrupt load by throttling of interrupts. Interrupt delay default is 64us. For iperf server mode the CPU load is significantly reduced to ~20% and the throughput reaches the maximum of 941MBit/s. Interrupts are generated every ~140us. RX and TX coalesce can be configured with ethtool. RX coalesce has priority over TX coalesce if the same interrupt is used. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Showing
Please register or sign in to comment