Commit d3f1e93c authored by Vinod Koul's avatar Vinod Koul

Merge branch 'topic/async' into for-linus

parents 7c7b680f b1d6ab1a
......@@ -117,7 +117,7 @@ The slave DMA usage consists of following steps:
transaction.
For cyclic DMA, a callback function may wish to terminate the
DMA via dmaengine_terminate_all().
DMA via dmaengine_terminate_async().
Therefore, it is important that DMA engine drivers drop any
locks before calling the callback function which may cause a
......@@ -155,12 +155,29 @@ The slave DMA usage consists of following steps:
Further APIs:
1. int dmaengine_terminate_all(struct dma_chan *chan)
1. int dmaengine_terminate_sync(struct dma_chan *chan)
int dmaengine_terminate_async(struct dma_chan *chan)
int dmaengine_terminate_all(struct dma_chan *chan) /* DEPRECATED */
This causes all activity for the DMA channel to be stopped, and may
discard data in the DMA FIFO which hasn't been fully transferred.
No callback functions will be called for any incomplete transfers.
Two variants of this function are available.
dmaengine_terminate_async() might not wait until the DMA has been fully
stopped or until any running complete callbacks have finished. But it is
possible to call dmaengine_terminate_async() from atomic context or from
within a complete callback. dmaengine_synchronize() must be called before it
is safe to free the memory accessed by the DMA transfer or free resources
accessed from within the complete callback.
dmaengine_terminate_sync() will wait for the transfer and any running
complete callbacks to finish before it returns. But the function must not be
called from atomic context or from within a complete callback.
dmaengine_terminate_all() is deprecated and should not be used in new code.
2. int dmaengine_pause(struct dma_chan *chan)
This pauses activity on the DMA channel without data loss.
......@@ -186,3 +203,20 @@ Further APIs:
a running DMA channel. It is recommended that DMA engine users
pause or stop (via dmaengine_terminate_all()) the channel before
using this API.
5. void dmaengine_synchronize(struct dma_chan *chan)
Synchronize the termination of the DMA channel to the current context.
This function should be used after dmaengine_terminate_async() to synchronize
the termination of the DMA channel to the current context. The function will
wait for the transfer and any running complete callbacks to finish before it
returns.
If dmaengine_terminate_async() is used to stop the DMA channel this function
must be called before it is safe to free memory accessed by previously
submitted descriptors or to free any resources accessed within the complete
callback of previously submitted descriptors.
The behavior of this function is undefined if dma_async_issue_pending() has
been called between dmaengine_terminate_async() and this function.
......@@ -327,8 +327,24 @@ supported.
* device_terminate_all
- Aborts all the pending and ongoing transfers on the channel
- This command should operate synchronously on the channel,
terminating right away all the channels
- For aborted transfers the complete callback should not be called
- Can be called from atomic context or from within a complete
callback of a descriptor. Must not sleep. Drivers must be able
to handle this correctly.
- Termination may be asynchronous. The driver does not have to
wait until the currently active transfer has completely stopped.
See device_synchronize.
* device_synchronize
- Must synchronize the termination of a channel to the current
context.
- Must make sure that memory for previously submitted
descriptors is no longer accessed by the DMA controller.
- Must make sure that all complete callbacks for previously
submitted descriptors have finished running and none are
scheduled to run.
- May sleep.
Misc notes (stuff that should be documented, but don't really know
where to put them)
......
......@@ -307,6 +307,13 @@ static int axi_dmac_terminate_all(struct dma_chan *c)
return 0;
}
static void axi_dmac_synchronize(struct dma_chan *c)
{
struct axi_dmac_chan *chan = to_axi_dmac_chan(c);
vchan_synchronize(&chan->vchan);
}
static void axi_dmac_issue_pending(struct dma_chan *c)
{
struct axi_dmac_chan *chan = to_axi_dmac_chan(c);
......@@ -613,6 +620,7 @@ static int axi_dmac_probe(struct platform_device *pdev)
dma_dev->device_prep_dma_cyclic = axi_dmac_prep_dma_cyclic;
dma_dev->device_prep_interleaved_dma = axi_dmac_prep_interleaved;
dma_dev->device_terminate_all = axi_dmac_terminate_all;
dma_dev->device_synchronize = axi_dmac_synchronize;
dma_dev->dev = &pdev->dev;
dma_dev->chancnt = 1;
dma_dev->src_addr_widths = BIT(dmac->chan.src_width);
......
......@@ -266,8 +266,11 @@ static void dma_chan_put(struct dma_chan *chan)
module_put(dma_chan_to_owner(chan));
/* This channel is not in use anymore, free it */
if (!chan->client_count && chan->device->device_free_chan_resources)
if (!chan->client_count && chan->device->device_free_chan_resources) {
/* Make sure all operations have completed */
dmaengine_synchronize(chan);
chan->device->device_free_chan_resources(chan);
}
/* If the channel is used via a DMA request router, free the mapping */
if (chan->router && chan->router->route_free) {
......
......@@ -163,4 +163,17 @@ static inline void vchan_free_chan_resources(struct virt_dma_chan *vc)
vchan_dma_desc_free_list(vc, &head);
}
/**
* vchan_synchronize() - synchronize callback execution to the current context
* @vc: virtual channel to synchronize
*
* Makes sure that all scheduled or active callbacks have finished running. For
* proper operation the caller has to ensure that no new callbacks are scheduled
* after the invocation of this function started.
*/
static inline void vchan_synchronize(struct virt_dma_chan *vc)
{
tasklet_kill(&vc->task);
}
#endif
......@@ -681,6 +681,8 @@ struct dma_filter {
* paused. Returns 0 or an error code
* @device_terminate_all: Aborts all transfers on a channel. Returns 0
* or an error code
* @device_synchronize: Synchronizes the termination of a transfers to the
* current context.
* @device_tx_status: poll for transaction completion, the optional
* txstate parameter can be supplied with a pointer to get a
* struct with auxiliary transfer status information, otherwise the call
......@@ -767,6 +769,7 @@ struct dma_device {
int (*device_pause)(struct dma_chan *chan);
int (*device_resume)(struct dma_chan *chan);
int (*device_terminate_all)(struct dma_chan *chan);
void (*device_synchronize)(struct dma_chan *chan);
enum dma_status (*device_tx_status)(struct dma_chan *chan,
dma_cookie_t cookie,
......@@ -858,6 +861,13 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_sg(
src_sg, src_nents, flags);
}
/**
* dmaengine_terminate_all() - Terminate all active DMA transfers
* @chan: The channel for which to terminate the transfers
*
* This function is DEPRECATED use either dmaengine_terminate_sync() or
* dmaengine_terminate_async() instead.
*/
static inline int dmaengine_terminate_all(struct dma_chan *chan)
{
if (chan->device->device_terminate_all)
......@@ -866,6 +876,88 @@ static inline int dmaengine_terminate_all(struct dma_chan *chan)
return -ENOSYS;
}
/**
* dmaengine_terminate_async() - Terminate all active DMA transfers
* @chan: The channel for which to terminate the transfers
*
* Calling this function will terminate all active and pending descriptors
* that have previously been submitted to the channel. It is not guaranteed
* though that the transfer for the active descriptor has stopped when the
* function returns. Furthermore it is possible the complete callback of a
* submitted transfer is still running when this function returns.
*
* dmaengine_synchronize() needs to be called before it is safe to free
* any memory that is accessed by previously submitted descriptors or before
* freeing any resources accessed from within the completion callback of any
* perviously submitted descriptors.
*
* This function can be called from atomic context as well as from within a
* complete callback of a descriptor submitted on the same channel.
*
* If none of the two conditions above apply consider using
* dmaengine_terminate_sync() instead.
*/
static inline int dmaengine_terminate_async(struct dma_chan *chan)
{
if (chan->device->device_terminate_all)
return chan->device->device_terminate_all(chan);
return -EINVAL;
}
/**
* dmaengine_synchronize() - Synchronize DMA channel termination
* @chan: The channel to synchronize
*
* Synchronizes to the DMA channel termination to the current context. When this
* function returns it is guaranteed that all transfers for previously issued
* descriptors have stopped and and it is safe to free the memory assoicated
* with them. Furthermore it is guaranteed that all complete callback functions
* for a previously submitted descriptor have finished running and it is safe to
* free resources accessed from within the complete callbacks.
*
* The behavior of this function is undefined if dma_async_issue_pending() has
* been called between dmaengine_terminate_async() and this function.
*
* This function must only be called from non-atomic context and must not be
* called from within a complete callback of a descriptor submitted on the same
* channel.
*/
static inline void dmaengine_synchronize(struct dma_chan *chan)
{
might_sleep();
if (chan->device->device_synchronize)
chan->device->device_synchronize(chan);
}
/**
* dmaengine_terminate_sync() - Terminate all active DMA transfers
* @chan: The channel for which to terminate the transfers
*
* Calling this function will terminate all active and pending transfers
* that have previously been submitted to the channel. It is similar to
* dmaengine_terminate_async() but guarantees that the DMA transfer has actually
* stopped and that all complete callbacks have finished running when the
* function returns.
*
* This function must only be called from non-atomic context and must not be
* called from within a complete callback of a descriptor submitted on the same
* channel.
*/
static inline int dmaengine_terminate_sync(struct dma_chan *chan)
{
int ret;
ret = dmaengine_terminate_async(chan);
if (ret)
return ret;
dmaengine_synchronize(chan);
return 0;
}
static inline int dmaengine_pause(struct dma_chan *chan)
{
if (chan->device->device_pause)
......
......@@ -202,13 +202,13 @@ int snd_dmaengine_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
if (runtime->info & SNDRV_PCM_INFO_PAUSE)
dmaengine_pause(prtd->dma_chan);
else
dmaengine_terminate_all(prtd->dma_chan);
dmaengine_terminate_async(prtd->dma_chan);
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
dmaengine_pause(prtd->dma_chan);
break;
case SNDRV_PCM_TRIGGER_STOP:
dmaengine_terminate_all(prtd->dma_chan);
dmaengine_terminate_async(prtd->dma_chan);
break;
default:
return -EINVAL;
......@@ -346,6 +346,7 @@ int snd_dmaengine_pcm_close(struct snd_pcm_substream *substream)
{
struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream);
dmaengine_synchronize(prtd->dma_chan);
kfree(prtd);
return 0;
......@@ -362,9 +363,11 @@ int snd_dmaengine_pcm_close_release_chan(struct snd_pcm_substream *substream)
{
struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream);
dmaengine_synchronize(prtd->dma_chan);
dma_release_channel(prtd->dma_chan);
kfree(prtd);
return snd_dmaengine_pcm_close(substream);
return 0;
}
EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_close_release_chan);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment