Commit d43f9cdb authored by John Garry's avatar John Garry Committed by Martin K. Petersen

hisi_sas: add v2 SATA interrupt handler

Signed-off-by: default avatarJohn Garry <john.garry@huawei.com>
Reviewed-by: default avatarHannes Reinecke <hare@suse.de>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent d3bf3d84
......@@ -861,6 +861,86 @@ static irqreturn_t int_chnl_int_v2_hw(int irq_no, void *p)
return IRQ_HANDLED;
}
static irqreturn_t sata_int_v2_hw(int irq_no, void *p)
{
struct hisi_sas_phy *phy = p;
struct hisi_hba *hisi_hba = phy->hisi_hba;
struct asd_sas_phy *sas_phy = &phy->sas_phy;
struct device *dev = &hisi_hba->pdev->dev;
struct hisi_sas_initial_fis *initial_fis;
struct dev_to_host_fis *fis;
u32 ent_tmp, ent_msk, ent_int, port_id, link_rate, hard_phy_linkrate;
irqreturn_t res = IRQ_HANDLED;
u8 attached_sas_addr[SAS_ADDR_SIZE] = {0};
int phy_no;
phy_no = sas_phy->id;
initial_fis = &hisi_hba->initial_fis[phy_no];
fis = &initial_fis->fis;
ent_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK1);
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, ent_msk | 1 << phy_no);
ent_int = hisi_sas_read32(hisi_hba, ENT_INT_SRC1);
ent_tmp = ent_int;
ent_int >>= ENT_INT_SRC1_D2H_FIS_CH1_OFF * (phy_no % 4);
if ((ent_int & ENT_INT_SRC1_D2H_FIS_CH0_MSK) == 0) {
dev_warn(dev, "sata int: phy%d did not receive FIS\n", phy_no);
hisi_sas_write32(hisi_hba, ENT_INT_SRC1, ent_tmp);
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, ent_msk);
res = IRQ_NONE;
goto end;
}
if (unlikely(phy_no == 8)) {
u32 port_state = hisi_sas_read32(hisi_hba, PORT_STATE);
port_id = (port_state & PORT_STATE_PHY8_PORT_NUM_MSK) >>
PORT_STATE_PHY8_PORT_NUM_OFF;
link_rate = (port_state & PORT_STATE_PHY8_CONN_RATE_MSK) >>
PORT_STATE_PHY8_CONN_RATE_OFF;
} else {
port_id = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA);
port_id = (port_id >> (4 * phy_no)) & 0xf;
link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE);
link_rate = (link_rate >> (phy_no * 4)) & 0xf;
}
if (port_id == 0xf) {
dev_err(dev, "sata int: phy%d invalid portid\n", phy_no);
res = IRQ_NONE;
goto end;
}
sas_phy->linkrate = link_rate;
hard_phy_linkrate = hisi_sas_phy_read32(hisi_hba, phy_no,
HARD_PHY_LINKRATE);
phy->maximum_linkrate = hard_phy_linkrate & 0xf;
phy->minimum_linkrate = (hard_phy_linkrate >> 4) & 0xf;
sas_phy->oob_mode = SATA_OOB_MODE;
/* Make up some unique SAS address */
attached_sas_addr[0] = 0x50;
attached_sas_addr[7] = phy_no;
memcpy(sas_phy->attached_sas_addr, attached_sas_addr, SAS_ADDR_SIZE);
memcpy(sas_phy->frame_rcvd, fis, sizeof(struct dev_to_host_fis));
dev_info(dev, "sata int phyup: phy%d link_rate=%d\n", phy_no, link_rate);
phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
phy->port_id = port_id;
phy->phy_type |= PORT_TYPE_SATA;
phy->phy_attached = 1;
phy->identify.device_type = SAS_SATA_DEV;
phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
queue_work(hisi_hba->wq, &phy->phyup_ws);
end:
hisi_sas_write32(hisi_hba, ENT_INT_SRC1, ent_tmp);
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, ent_msk);
return res;
}
static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
int_phy_updown_v2_hw,
int_chnl_int_v2_hw,
......@@ -900,6 +980,26 @@ static int interrupt_init_v2_hw(struct hisi_hba *hisi_hba)
}
}
for (i = 0; i < hisi_hba->n_phy; i++) {
struct hisi_sas_phy *phy = &hisi_hba->phy[i];
int idx = i + 72; /* First SATA interrupt is irq72 */
irq = irq_map[idx];
if (!irq) {
dev_err(dev, "irq init: fail map phy interrupt %d\n",
idx);
return -ENOENT;
}
rc = devm_request_irq(dev, irq, sata_int_v2_hw, 0,
DRV_NAME " sata", phy);
if (rc) {
dev_err(dev, "irq init: could not request "
"sata interrupt %d, rc=%d\n",
irq, rc);
return -ENOENT;
}
}
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment