Skip to content

L
linux
Commit d49824c0 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman
Browse files
Options

Staging: sep: remove driver 

It's currently stalled and the original submitter recommended that it
just be dropped at this point in time due.

Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent f86b9984
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 3757 deletions
drivers/staging/Kconfig
View file @ d49824c0
......@@ -113,8 +113,6 @@ source "drivers/staging/vme/Kconfig"
source "drivers/staging/memrar/Kconfig"
source "drivers/staging/sep/Kconfig"
source "drivers/staging/iio/Kconfig"
source "drivers/staging/zram/Kconfig"
......
drivers/staging/Makefile
View file @ d49824c0
......@@ -38,7 +38,6 @@ obj-$(CONFIG_FB_UDL) += udlfb/
obj-$(CONFIG_HYPERV) += hv/
obj-$(CONFIG_VME_BUS) += vme/
obj-$(CONFIG_MRST_RAR_HANDLER) += memrar/
obj-$(CONFIG_DX_SEP) += sep/
obj-$(CONFIG_IIO) += iio/
obj-$(CONFIG_ZRAM) += zram/
obj-$(CONFIG_WLAGS49_H2) += wlags49_h2/
......
drivers/staging/sep/Kconfig deleted 100644 → 0
View file @ f86b9984
config DX_SEP
tristate "Discretix SEP driver"
# depends on MRST
depends on RAR_REGISTER && PCI
default y
help
Discretix SEP driver
If unsure say M. The compiled module will be
called sep_driver.ko
drivers/staging/sep/Makefile deleted 100644 → 0
View file @ f86b9984
obj-$(CONFIG_DX_SEP) := sep_driver.o
drivers/staging/sep/TODO deleted 100644 → 0
View file @ f86b9984
Todo's so far (from Alan Cox)
- Fix firmware loading
- Get firmware into firmware git tree
- Review and tidy each algorithm function
- Check whether it can be plugged into any of the kernel crypto API
interfaces
- Do something about the magic shared memory interface and replace it
with something saner (in Linux terms)
drivers/staging/sep/sep_dev.h deleted 100644 → 0
View file @ f86b9984
#ifndef __SEP_DEV_H__
#define __SEP_DEV_H__
/*
*
* sep_dev.h - Security Processor Device Structures
*
* Copyright(c) 2009 Intel Corporation. All rights reserved.
* Copyright(c) 2009 Discretix. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* CONTACTS:
*
* Alan Cox alan@linux.intel.com
*
*/
struct sep_device {
/* pointer to pci dev */
struct pci_dev *pdev;
unsigned long in_use;
/* address of the shared memory allocated during init for SEP driver
(coherent alloc) */
void *shared_addr;
/* the physical address of the shared area */
dma_addr_t shared_bus;
/* restricted access region (coherent alloc) */
dma_addr_t rar_bus;
void *rar_addr;
/* firmware regions: cache is at rar_addr */
unsigned long cache_size;
/* follows the cache */
dma_addr_t resident_bus;
unsigned long resident_size;
void *resident_addr;
/* start address of the access to the SEP registers from driver */
void __iomem *reg_addr;
/* transaction counter that coordinates the transactions between SEP and HOST */
unsigned long send_ct;
/* counter for the messages from sep */
unsigned long reply_ct;
/* counter for the number of bytes allocated in the pool for the current
transaction */
unsigned long data_pool_bytes_allocated;
/* array of pointers to the pages that represent input data for the synchronic
DMA action */
struct page **in_page_array;
/* array of pointers to the pages that represent out data for the synchronic
DMA action */
struct page **out_page_array;
/* number of pages in the sep_in_page_array */
unsigned long in_num_pages;
/* number of pages in the sep_out_page_array */
unsigned long out_num_pages;
/* global data for every flow */
struct sep_flow_context_t flows[SEP_DRIVER_NUM_FLOWS];
/* pointer to the workqueue that handles the flow done interrupts */
struct workqueue_struct *flow_wq;
};
static struct sep_device *sep_dev;
static inline void sep_write_reg(struct sep_device *dev, int reg, u32 value)
{
void __iomem *addr = dev->reg_addr + reg;
writel(value, addr);
}
static inline u32 sep_read_reg(struct sep_device *dev, int reg)
{
void __iomem *addr = dev->reg_addr + reg;
return readl(addr);
}
/* wait for SRAM write complete(indirect write */
static inline void sep_wait_sram_write(struct sep_device *dev)
{
u32 reg_val;
do
reg_val = sep_read_reg(dev, HW_SRAM_DATA_READY_REG_ADDR);
while (!(reg_val & 1));
}
#endif
drivers/staging/sep/sep_driver.c deleted 100644 → 0
View file @ f86b9984
This diff is collapsed.
drivers/staging/sep/sep_driver_api.h deleted 100644 → 0
View file @ f86b9984
This diff is collapsed.
drivers/staging/sep/sep_driver_config.h deleted 100644 → 0
View file @ f86b9984
/*
*
* sep_driver_config.h - Security Processor Driver configuration
*
* Copyright(c) 2009 Intel Corporation. All rights reserved.
* Copyright(c) 2009 Discretix. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* CONTACTS:
*
* Mark Allyn mark.a.allyn@intel.com
*
* CHANGES:
*
* 2009.06.26 Initial publish
*
*/
#ifndef __SEP_DRIVER_CONFIG_H__
#define __SEP_DRIVER_CONFIG_H__
/*--------------------------------------
DRIVER CONFIGURATION FLAGS
-------------------------------------*/
/* if flag is on , then the driver is running in polling and
not interrupt mode */
#define SEP_DRIVER_POLLING_MODE 1
/* flag which defines if the shared area address should be
reconfiged (send to SEP anew) during init of the driver */
#define SEP_DRIVER_RECONFIG_MESSAGE_AREA 0
/* the mode for running on the ARM1172 Evaluation platform (flag is 1) */
#define SEP_DRIVER_ARM_DEBUG_MODE 0
/*-------------------------------------------
INTERNAL DATA CONFIGURATION
-------------------------------------------*/
/* flag for the input array */
#define SEP_DRIVER_IN_FLAG 0
/* flag for output array */
#define SEP_DRIVER_OUT_FLAG 1
/* maximum number of entries in one LLI tables */
#define SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP 8
/*--------------------------------------------------------
SHARED AREA memory total size is 36K
it is divided is following:
SHARED_MESSAGE_AREA 8K }
}
STATIC_POOL_AREA 4K } MAPPED AREA ( 24 K)
}
DATA_POOL_AREA 12K }
SYNCHRONIC_DMA_TABLES_AREA 5K
FLOW_DMA_TABLES_AREA 4K
SYSTEM_MEMORY_AREA 3k
SYSTEM_MEMORY total size is 3k
it is divided as following:
TIME_MEMORY_AREA 8B
-----------------------------------------------------------*/
/*
the maximum length of the message - the rest of the message shared
area will be dedicated to the dma lli tables
*/
#define SEP_DRIVER_MAX_MESSAGE_SIZE_IN_BYTES (8 * 1024)
/* the size of the message shared area in pages */
#define SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES (8 * 1024)
/* the size of the data pool static area in pages */
#define SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES (4 * 1024)
/* the size of the data pool shared area size in pages */
#define SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES (12 * 1024)
/* the size of the message shared area in pages */
#define SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_SIZE_IN_BYTES (1024 * 5)
/* the size of the data pool shared area size in pages */
#define SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES (1024 * 4)
/* system data (time, caller id etc') pool */
#define SEP_DRIVER_SYSTEM_DATA_MEMORY_SIZE_IN_BYTES 100
/* area size that is mapped - we map the MESSAGE AREA, STATIC POOL and
DATA POOL areas. area must be module 4k */
#define SEP_DRIVER_MMMAP_AREA_SIZE (1024 * 24)
/*-----------------------------------------------
offsets of the areas starting from the shared area start address
*/
/* message area offset */
#define SEP_DRIVER_MESSAGE_AREA_OFFSET_IN_BYTES 0
/* static pool area offset */
#define SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES \
(SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES)
/* data pool area offset */
#define SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES \
(SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES + \
SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES)
/* synhronic dma tables area offset */
#define SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES \
(SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + \
SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES)
/* sep driver flow dma tables area offset */
#define SEP_DRIVER_FLOW_DMA_TABLES_AREA_OFFSET_IN_BYTES \
(SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES + \
SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_SIZE_IN_BYTES)
/* system memory offset in bytes */
#define SEP_DRIVER_SYSTEM_DATA_MEMORY_OFFSET_IN_BYTES \
(SEP_DRIVER_FLOW_DMA_TABLES_AREA_OFFSET_IN_BYTES + \
SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES)
/* offset of the time area */
#define SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES \
(SEP_DRIVER_SYSTEM_DATA_MEMORY_OFFSET_IN_BYTES)
/* start physical address of the SEP registers memory in HOST */
#define SEP_IO_MEM_REGION_START_ADDRESS 0x80000000
/* size of the SEP registers memory region in HOST (for now 100 registers) */
#define SEP_IO_MEM_REGION_SIZE (2 * 0x100000)
/* define the number of IRQ for SEP interrupts */
#define SEP_DIRVER_IRQ_NUM 1
/* maximum number of add buffers */
#define SEP_MAX_NUM_ADD_BUFFERS 100
/* number of flows */
#define SEP_DRIVER_NUM_FLOWS 4
/* maximum number of entries in flow table */
#define SEP_DRIVER_MAX_FLOW_NUM_ENTRIES_IN_TABLE 25
/* offset of the num entries in the block length entry of the LLI */
#define SEP_NUM_ENTRIES_OFFSET_IN_BITS 24
/* offset of the interrupt flag in the block length entry of the LLI */
#define SEP_INT_FLAG_OFFSET_IN_BITS 31
/* mask for extracting data size from LLI */
#define SEP_TABLE_DATA_SIZE_MASK 0xFFFFFF
/* mask for entries after being shifted left */
#define SEP_NUM_ENTRIES_MASK 0x7F
/* default flow id */
#define SEP_FREE_FLOW_ID 0xFFFFFFFF
/* temp flow id used during cretiong of new flow until receiving
real flow id from sep */
#define SEP_TEMP_FLOW_ID (SEP_DRIVER_NUM_FLOWS + 1)
/* maximum add buffers message length in bytes */
#define SEP_MAX_ADD_MESSAGE_LENGTH_IN_BYTES (7 * 4)
/* maximum number of concurrent virtual buffers */
#define SEP_MAX_VIRT_BUFFERS_CONCURRENT 100
/* the token that defines the start of time address */
#define SEP_TIME_VAL_TOKEN 0x12345678
/* DEBUG LEVEL MASKS */
#define SEP_DEBUG_LEVEL_BASIC 0x1
#define SEP_DEBUG_LEVEL_EXTENDED 0x4
/* Debug helpers */
#define dbg(fmt, args...) \
do {\
if (debug & SEP_DEBUG_LEVEL_BASIC) \
printk(KERN_DEBUG fmt, ##args); \
} while(0);
#define edbg(fmt, args...) \
do { \
if (debug & SEP_DEBUG_LEVEL_EXTENDED) \
printk(KERN_DEBUG fmt, ##args); \
} while(0);
#endif
drivers/staging/sep/sep_driver_hw_defs.h deleted 100644 → 0
View file @ f86b9984
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7