Merge tag 'omap-for-v4.13/fixes-merge-window' of...

Merge tag 'omap-for-v4.13/fixes-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Pull "Few fixes for omaps for issues found recently" from Tony Lindgren:

- Fix disable_irq related shared IRQ warnings for omap3 PRM

- Fix omap4 legacy code regression that accidentally removed code that
  we still need for PRM interrupts

- Fix dm8168-evm NAND pins and MMC write protect pin direction

- Fix dra71-evm mdio impedance values

* tag 'omap-for-v4.13/fixes-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: dra71-evm: mdio: Fix impedance values
  ARM: dts: dm816x: Correct the state of the write protect pin
  ARM: dts: dm816x: Correct NAND support nodes
  ARM: OMAP4: Fix legacy code clean-up regression
  ARM: OMAP2+: Fix omap3 prm shared irq

arch/arm/boot/dts/dm8168-evm.dts

@@ -68,6 +68,34 @@ usb1_pins: pinmux_usb1_pins {
 			DM816X_IOPAD(0x0d08, MUX_MODE0)			/* USB1_DRVVBUS */
 		>;
 	};
+
+	nandflash_pins: nandflash_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0b38, PULL_UP | MUX_MODE0)		/* PINCTRL207 GPMC_CS0*/
+			DM816X_IOPAD(0x0b60, PULL_ENA | MUX_MODE0)		/* PINCTRL217 GPMC_ADV_ALE */
+			DM816X_IOPAD(0x0b54, PULL_UP | PULL_ENA | MUX_MODE0)	/* PINCTRL214 GPMC_OE_RE */
+			DM816X_IOPAD(0x0b58, PULL_ENA | MUX_MODE0)		/* PINCTRL215 GPMC_BE0_CLE */
+			DM816X_IOPAD(0x0b50, PULL_UP | MUX_MODE0)		/* PINCTRL213 GPMC_WE */
+			DM816X_IOPAD(0x0b6c, MUX_MODE0)				/* PINCTRL220 GPMC_WAIT */
+			DM816X_IOPAD(0x0be4, PULL_ENA | MUX_MODE0)		/* PINCTRL250 GPMC_CLK */
+			DM816X_IOPAD(0x0ba4, MUX_MODE0)				/* PINCTRL234 GPMC_D0 */
+			DM816X_IOPAD(0x0ba8, MUX_MODE0)				/* PINCTRL234 GPMC_D1 */
+			DM816X_IOPAD(0x0bac, MUX_MODE0)				/* PINCTRL234 GPMC_D2 */
+			DM816X_IOPAD(0x0bb0, MUX_MODE0)				/* PINCTRL234 GPMC_D3 */
+			DM816X_IOPAD(0x0bb4, MUX_MODE0)				/* PINCTRL234 GPMC_D4 */
+			DM816X_IOPAD(0x0bb8, MUX_MODE0)				/* PINCTRL234 GPMC_D5 */
+			DM816X_IOPAD(0x0bbc, MUX_MODE0)				/* PINCTRL234 GPMC_D6 */
+			DM816X_IOPAD(0x0bc0, MUX_MODE0)				/* PINCTRL234 GPMC_D7 */
+			DM816X_IOPAD(0x0bc4, MUX_MODE0)				/* PINCTRL234 GPMC_D8 */
+			DM816X_IOPAD(0x0bc8, MUX_MODE0)				/* PINCTRL234 GPMC_D9 */
+			DM816X_IOPAD(0x0bcc, MUX_MODE0)				/* PINCTRL234 GPMC_D10 */
+			DM816X_IOPAD(0x0bd0, MUX_MODE0)				/* PINCTRL234 GPMC_D11 */
+			DM816X_IOPAD(0x0bd4, MUX_MODE0)				/* PINCTRL234 GPMC_D12 */
+			DM816X_IOPAD(0x0bd8, MUX_MODE0)				/* PINCTRL234 GPMC_D13 */
+			DM816X_IOPAD(0x0bdc, MUX_MODE0)				/* PINCTRL234 GPMC_D14 */
+			DM816X_IOPAD(0x0be0, MUX_MODE0)				/* PINCTRL234 GPMC_D15 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -90,6 +118,8 @@ extgpio1: pcf8575@20 {
 
 &gpmc {
 	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";
@@ -98,9 +128,11 @@ nand@0,0 {
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>; /* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		gpmc,sync-clk-ps = <0>;
@@ -164,7 +196,7 @@ &mmc1 {
 	vmmc-supply = <&vmmcsd_fixed>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
 };
 
 /* At least dm8168-evm rev c won't support multipoint, later may */

arch/arm/boot/dts/dm816x.dtsi

@@ -145,7 +145,7 @@ edma: edma@49000000 {
 		};
 
 		elm: elm@48080000 {
-			compatible = "ti,816-elm";
+			compatible = "ti,am3352-elm";
 			ti,hwmods = "elm";
 			reg = <0x48080000 0x2000>;
 			interrupts = <4>;

arch/arm/boot/dts/dra71-evm.dts

@@ -190,7 +190,7 @@ dp83867_0: ethernet-phy@2 {
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,impedance-control = <0x1f>;
+		ti,min-output-impedance;
 	};
 
 	dp83867_1: ethernet-phy@3 {
@@ -198,7 +198,7 @@ dp83867_1: ethernet-phy@3 {
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,impedance-control = <0x1f>;
+		ti,min-output-impedance;
 	};
 };
 

arch/arm/mach-omap2/pm34xx.c

@@ -486,7 +486,6 @@ int __init omap3_pm_init(void)
 	ret = request_irq(omap_prcm_event_to_irq("io"),
 		_prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io",
 		omap3_pm_init);
-	enable_irq(omap_prcm_event_to_irq("io"));
 
 	if (ret) {
 		pr_err("pm: Failed to request pm_io irq\n");

arch/arm/mach-omap2/prm3xxx.c

@@ -692,7 +692,6 @@ static int omap3xxx_prm_late_init(void)
 {
 	struct device_node *np;
 	int irq_num;
-	int ret;
 
 	if (!(prm_features & PRM_HAS_IO_WAKEUP))
 		return 0;
@@ -712,12 +711,8 @@ static int omap3xxx_prm_late_init(void)
 	}
 
 	omap3xxx_prm_enable_io_wakeup();
-	ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
-	if (!ret)
-		irq_set_status_flags(omap_prcm_event_to_irq("io"),
-				     IRQ_NOAUTOEN);
 
-	return ret;
+	return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
 }
 
 static void __exit omap3xxx_prm_exit(void)

arch/arm/mach-omap2/prm44xx.c

@@ -336,6 +336,27 @@ static void omap44xx_prm_reconfigure_io_chain(void)
 	return;
 }
 
+/**
+ * omap44xx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
+ *
+ * Activates the I/O wakeup event latches and allows events logged by
+ * those latches to signal a wakeup event to the PRCM.  For I/O wakeups
+ * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and
+ * omap44xx_prm_reconfigure_io_chain() must be called.  No return value.
+ */
+static void __init omap44xx_prm_enable_io_wakeup(void)
+{
+	s32 inst = omap4_prmst_get_prm_dev_inst();
+
+	if (inst == PRM_INSTANCE_UNKNOWN)
+		return;
+
+	omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK,
+				    OMAP4430_GLOBAL_WUEN_MASK,
+				    inst,
+				    omap4_prcm_irq_setup.pm_ctrl);
+}
+
 /**
  * omap44xx_prm_read_reset_sources - return the last SoC reset source
  *
@@ -668,6 +689,8 @@ struct pwrdm_ops omap4_pwrdm_operations = {
 	.pwrdm_has_voltdm	= omap4_check_vcvp,
 };
 
+static int omap44xx_prm_late_init(void);
+
 /*
  * XXX document
  */
@@ -675,6 +698,7 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 	.read_reset_sources = &omap44xx_prm_read_reset_sources,
 	.was_any_context_lost_old = &omap44xx_prm_was_any_context_lost_old,
 	.clear_context_loss_flags_old = &omap44xx_prm_clear_context_loss_flags_old,
+	.late_init = &omap44xx_prm_late_init,
 	.assert_hardreset	= omap4_prminst_assert_hardreset,
 	.deassert_hardreset	= omap4_prminst_deassert_hardreset,
 	.is_hardreset_asserted	= omap4_prminst_is_hardreset_asserted,
@@ -711,6 +735,37 @@ int __init omap44xx_prm_init(const struct omap_prcm_init_data *data)
 	return prm_register(&omap44xx_prm_ll_data);
 }
 
+static int omap44xx_prm_late_init(void)
+{
+	int irq_num;
+
+	if (!(prm_features & PRM_HAS_IO_WAKEUP))
+		return 0;
+
+	irq_num = of_irq_get(prm_init_data->np, 0);
+	/*
+	 * Already have OMAP4 IRQ num. For all other platforms, we need
+	 * IRQ numbers from DT
+	 */
+	if (irq_num < 0 && !(prm_init_data->flags & PRM_IRQ_DEFAULT)) {
+		if (irq_num == -EPROBE_DEFER)
+			return irq_num;
+
+		/* Have nothing to do */
+		return 0;
+	}
+
+	/* Once OMAP4 DT is filled as well */
+	if (irq_num >= 0) {
+		omap4_prcm_irq_setup.irq = irq_num;
+		omap4_prcm_irq_setup.xlate_irq = NULL;
+	}
+
+	omap44xx_prm_enable_io_wakeup();
+
+	return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
+}
+
 static void __exit omap44xx_prm_exit(void)
 {
 	prm_unregister(&omap44xx_prm_ll_data);