Merge tag 'auxdisplay-for-linus-v5.18-rc1' of https://github.com/ojeda/linux

Pull auxdisplay updates from Miguel Ojeda:
 "A few auxdisplay lcd2s improvements from Andy Shevchenko"

* tag 'auxdisplay-for-linus-v5.18-rc1' of https://github.com/ojeda/linux:
  auxdisplay: lcd2s: Use array size explicitly in lcd2s_gotoxy()
  auxdisplay: lcd2s: Switch to i2c ->probe_new()
  auxdisplay: lcd2s: use module_i2c_driver to simplify the code
  auxdisplay: lcd2s: make use of device property API
  auxdisplay: lcd2s: Fix multi-line comment style

drivers/auxdisplay/lcd2s.c

 // SPDX-License-Identifier: GPL-2.0
 /*
- *  console driver for LCD2S 4x20 character displays connected through i2c.
- *  The display also has a spi interface, but the driver does not support
+ *  Console driver for LCD2S 4x20 character displays connected through i2c.
+ *  The display also has a SPI interface, but the driver does not support
  *  this yet.
  *
- *  This is a driver allowing you to use a LCD2S 4x20 from modtronix
+ *  This is a driver allowing you to use a LCD2S 4x20 from Modtronix
  *  engineering as auxdisplay character device.
  *
  *  (C) 2019 by Lemonage Software GmbH
@@ -12,7 +12,9 @@
  *  All rights reserved.
  */
 #include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/delay.h>
@@ -104,7 +106,7 @@ static int lcd2s_print(struct charlcd *lcd, int c)
 static int lcd2s_gotoxy(struct charlcd *lcd, unsigned int x, unsigned int y)
 {
 	struct lcd2s_data *lcd2s = lcd->drvdata;
-	u8 buf[] = { LCD2S_CMD_CUR_POS, y + 1, x + 1};
+	u8 buf[3] = { LCD2S_CMD_CUR_POS, y + 1, x + 1 };
 
 	lcd2s_i2c_master_send(lcd2s->i2c, buf, sizeof(buf));
 
@@ -214,16 +216,15 @@ static int lcd2s_lines(struct charlcd *lcd, enum charlcd_lines lines)
 	return 0;
 }
 
+/*
+ * Generator: LGcxxxxx...xx; must have <c> between '0' and '7',
+ * representing the numerical ASCII code of the redefined character,
+ * and <xx...xx> a sequence of 16 hex digits representing 8 bytes
+ * for each character. Most LCDs will only use 5 lower bits of
+ * the 7 first bytes.
+ */
 static int lcd2s_redefine_char(struct charlcd *lcd, char *esc)
 {
-	/* Generator : LGcxxxxx...xx; must have <c> between '0'
-	 * and '7', representing the numerical ASCII code of the
-	 * redefined character, and <xx...xx> a sequence of 16
-	 * hex digits representing 8 bytes for each character.
-	 * Most LCDs will only use 5 lower bits of the 7 first
-	 * bytes.
-	 */
-
 	struct lcd2s_data *lcd2s = lcd->drvdata;
 	u8 buf[LCD2S_CHARACTER_SIZE + 2] = { LCD2S_CMD_DEF_CUSTOM_CHAR };
 	u8 value;
@@ -286,8 +287,7 @@ static const struct charlcd_ops lcd2s_ops = {
 	.redefine_char	= lcd2s_redefine_char,
 };
 
-static int lcd2s_i2c_probe(struct i2c_client *i2c,
-				const struct i2c_device_id *id)
+static int lcd2s_i2c_probe(struct i2c_client *i2c)
 {
 	struct charlcd *lcd;
 	struct lcd2s_data *lcd2s;
@@ -355,43 +355,22 @@ static const struct i2c_device_id lcd2s_i2c_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, lcd2s_i2c_id);
 
-#ifdef CONFIG_OF
 static const struct of_device_id lcd2s_of_table[] = {
 	{ .compatible = "modtronix,lcd2s" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, lcd2s_of_table);
-#endif
 
 static struct i2c_driver lcd2s_i2c_driver = {
 	.driver = {
 		.name = "lcd2s",
-#ifdef CONFIG_OF
-		.of_match_table = of_match_ptr(lcd2s_of_table),
-#endif
+		.of_match_table = lcd2s_of_table,
 	},
-	.probe = lcd2s_i2c_probe,
+	.probe_new = lcd2s_i2c_probe,
 	.remove = lcd2s_i2c_remove,
 	.id_table = lcd2s_i2c_id,
 };
-
-static int __init lcd2s_modinit(void)
-{
-	int ret = 0;
-
-	ret = i2c_add_driver(&lcd2s_i2c_driver);
-	if (ret != 0)
-		pr_err("Failed to register lcd2s driver\n");
-
-	return ret;
-}
-module_init(lcd2s_modinit)
-
-static void __exit lcd2s_exit(void)
-{
-	i2c_del_driver(&lcd2s_i2c_driver);
-}
-module_exit(lcd2s_exit)
+module_i2c_driver(lcd2s_i2c_driver);
 
 MODULE_DESCRIPTION("LCD2S character display driver");
 MODULE_AUTHOR("Lars Poeschel");