Commit d501ff90 authored by Jon Hunter's avatar Jon Hunter Committed by Lee Jones

mfd: cros ec: spi: Simplify delay handling between SPI messages

The EC SPI driver prevents SPI transfers being to rapidly by keeping
track of the time the last transfer was issued via the
'last_transfer_ns' variable. Previously, if the 'last_transfer_ns'
variable was zero, this indicated that no previous transfer had been
sent and that no delay was needed. However, the EC SPI driver has
been updated to always initialise the 'last_transfer_ns' variable
during probe and therefore, it is no longer necessary to test if it
is zero. Remove the code that checks if this variable is zero.
Signed-off-by: default avatarJon Hunter <jonathanh@nvidia.com>
Reviewed-by: default avatarBrian Norris <briannorris@chromium.org>
Reviewed-by: default avatarDouglas Anderson <dianders@chromium.org>
Acked-by: default avatarBenson Leung <bleung@chromium.org>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent 572ff4d5
......@@ -72,8 +72,7 @@
* struct cros_ec_spi - information about a SPI-connected EC
*
* @spi: SPI device we are connected to
* @last_transfer_ns: time that we last finished a transfer, or 0 if there
* if no record
* @last_transfer_ns: time that we last finished a transfer.
* @start_of_msg_delay: used to set the delay_usecs on the spi_transfer that
* is sent when we want to turn on CS at the start of a transaction.
* @end_of_msg_delay: used to set the delay_usecs on the spi_transfer that
......@@ -378,18 +377,15 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
u8 *rx_buf;
u8 sum;
int ret = 0, final_ret;
unsigned long delay;
len = cros_ec_prepare_tx(ec_dev, ec_msg);
dev_dbg(ec_dev->dev, "prepared, len=%d\n", len);
/* If it's too soon to do another transaction, wait */
if (ec_spi->last_transfer_ns) {
unsigned long delay; /* The delay completed so far */
delay = ktime_get_ns() - ec_spi->last_transfer_ns;
if (delay < EC_SPI_RECOVERY_TIME_NS)
ndelay(EC_SPI_RECOVERY_TIME_NS - delay);
}
delay = ktime_get_ns() - ec_spi->last_transfer_ns;
if (delay < EC_SPI_RECOVERY_TIME_NS)
ndelay(EC_SPI_RECOVERY_TIME_NS - delay);
rx_buf = kzalloc(len, GFP_KERNEL);
if (!rx_buf)
......@@ -510,18 +506,15 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
u8 *rx_buf;
int sum;
int ret = 0, final_ret;
unsigned long delay;
len = cros_ec_prepare_tx(ec_dev, ec_msg);
dev_dbg(ec_dev->dev, "prepared, len=%d\n", len);
/* If it's too soon to do another transaction, wait */
if (ec_spi->last_transfer_ns) {
unsigned long delay; /* The delay completed so far */
delay = ktime_get_ns() - ec_spi->last_transfer_ns;
if (delay < EC_SPI_RECOVERY_TIME_NS)
ndelay(EC_SPI_RECOVERY_TIME_NS - delay);
}
delay = ktime_get_ns() - ec_spi->last_transfer_ns;
if (delay < EC_SPI_RECOVERY_TIME_NS)
ndelay(EC_SPI_RECOVERY_TIME_NS - delay);
rx_buf = kzalloc(len, GFP_KERNEL);
if (!rx_buf)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment