Commit d5a0c816 authored by Stefan Agner's avatar Stefan Agner

drm: mxsfb: check framebuffer pitch

The lcdif IP does not support a framebuffer pitch (stride) other than
framebuffer width. Check for equality and reject the framebuffer
otherwise.

This prevents a distorted picture when using 640x800 and running the
Mesa graphics stack. Mesa tries to use a cache aligned stride, which
leads at that particular resolution to width != stride. Currently
Mesa has no fallback behavior, but rejecting this configuration allows
userspace to handle the issue correctly.

Fixes: 45d59d70 ("drm: Add new driver for MXSFB controller")
Signed-off-by: default avatarStefan Agner <stefan@agner.ch>
Reviewed-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200908141654.266836-1-stefan@agner.ch
parent dd425545
......@@ -21,6 +21,7 @@
#include <drm/drm_connector.h>
#include <drm/drm_drv.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_gem_framebuffer_helper.h>
#include <drm/drm_irq.h>
......@@ -81,8 +82,26 @@ void mxsfb_disable_axi_clk(struct mxsfb_drm_private *mxsfb)
clk_disable_unprepare(mxsfb->clk_axi);
}
static struct drm_framebuffer *
mxsfb_fb_create(struct drm_device *dev, struct drm_file *file_priv,
const struct drm_mode_fb_cmd2 *mode_cmd)
{
const struct drm_format_info *info;
info = drm_get_format_info(dev, mode_cmd);
if (!info)
return ERR_PTR(-EINVAL);
if (mode_cmd->width * info->cpp[0] != mode_cmd->pitches[0]) {
dev_dbg(dev->dev, "Invalid pitch: fb width must match pitch\n");
return ERR_PTR(-EINVAL);
}
return drm_gem_fb_create(dev, file_priv, mode_cmd);
}
static const struct drm_mode_config_funcs mxsfb_mode_config_funcs = {
.fb_create = drm_gem_fb_create,
.fb_create = mxsfb_fb_create,
.atomic_check = drm_atomic_helper_check,
.atomic_commit = drm_atomic_helper_commit,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment