Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: don't call switch on old cards
  mmc: fix broken if clause
  au1xmmc: Replace C code with call to ARRAY_SIZE() macro.
  mmc-atmel: remove linux/mmc/protocol.h dependencies

drivers/mmc/core/sd.c

@@ -15,6 +15,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
 #include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
 
 #include "core.h"
 #include "sysfs.h"
@@ -192,6 +193,16 @@ static int mmc_read_switch(struct mmc_card *card)
 	int err;
 	u8 *status;
 
+	if (card->scr.sda_vsn < SCR_SPEC_VER_1)
+		return MMC_ERR_NONE;
+
+	if (!(card->csd.cmdclass & CCC_SWITCH)) {
+		printk(KERN_WARNING "%s: card lacks mandatory switch "
+			"function, performance might suffer.\n",
+			mmc_hostname(card->host));
+		return MMC_ERR_NONE;
+	}
+
 	err = MMC_ERR_FAILED;
 
 	status = kmalloc(64, GFP_KERNEL);
@@ -204,10 +215,9 @@ static int mmc_read_switch(struct mmc_card *card)
 
 	err = mmc_sd_switch(card, 0, 0, 1, status);
 	if (err != MMC_ERR_NONE) {
-		/*
-		 * Card not supporting high-speed will ignore the
-		 * command.
-		 */
+		printk(KERN_WARNING "%s: problem reading switch "
+			"capabilities, performance might suffer.\n",
+			mmc_hostname(card->host));
 		err = MMC_ERR_NONE;
 		goto out;
 	}
@@ -229,6 +239,12 @@ static int mmc_switch_hs(struct mmc_card *card)
 	int err;
 	u8 *status;
 
+	if (card->scr.sda_vsn < SCR_SPEC_VER_1)
+		return MMC_ERR_NONE;
+
+	if (!(card->csd.cmdclass & CCC_SWITCH))
+		return MMC_ERR_NONE;
+
 	if (!(card->host->caps & MMC_CAP_SD_HIGHSPEED))
 		return MMC_ERR_NONE;
 
@@ -402,7 +418,7 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
 	/*
 	 * Switch to wider bus (if supported).
 	 */
-	if ((host->caps && MMC_CAP_4_BIT_DATA) &&
+	if ((host->caps & MMC_CAP_4_BIT_DATA) &&
 		(card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
 		err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4);
 		if (err != MMC_ERR_NONE)

drivers/mmc/host/at91_mci.c

@@ -417,7 +417,7 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_
 		blocks = 0;
 	}
 
-	if (cmd->opcode == MMC_STOP_TRANSMISSION)
+	if (host->flags & FL_SENT_STOP)
 		cmdr |= AT91_MCI_TRCMD_STOP;
 
 	if (host->bus_mode == MMC_BUSMODE_OPENDRAIN)
@@ -563,8 +563,7 @@ static void at91mci_completed_command(struct at91mci_host *host)
 	if (status & (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE |
 			AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE |
 			AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)) {
-		if ((status & AT91_MCI_RCRCE) &&
-			((cmd->opcode == MMC_SEND_OP_COND) || (cmd->opcode == SD_APP_OP_COND))) {
+		if ((status & AT91_MCI_RCRCE) && !(mmc_resp_type(cmd) & MMC_RSP_CRC)) {
 			cmd->error = MMC_ERR_NONE;
 		}
 		else {

drivers/mmc/host/au1xmmc.c

@@ -76,8 +76,7 @@ const struct {
 #endif
 };
 
-#define AU1XMMC_CONTROLLER_COUNT \
-	(sizeof(au1xmmc_card_table) / sizeof(au1xmmc_card_table[0]))
+#define AU1XMMC_CONTROLLER_COUNT (ARRAY_SIZE(au1xmmc_card_table))
 
 /* This array stores pointers for the hosts (used by the IRQ handler) */
 struct au1xmmc_host *au1xmmc_hosts[AU1XMMC_CONTROLLER_COUNT];