ARM: ux500: move TC35892 at 0x42 to hrefprev60

The TC35892 was mounted as a GPIO expander on the HREF prior
to v60 and not in later versions, which instead use the Nomadik
GPIO directly, so move it over to the hrefprev60 DTS file.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/boot/dts/ste-href.dtsi

@@ -41,28 +41,6 @@ uart@80007000 {
 			status = "okay";
 		};
 
-		i2c@80004000 {
-			tc3589x@42 {
-				compatible = "tc3589x";
-				reg = <0x42>;
-				interrupt-parent = <&gpio6>;
-				interrupts = <25 IRQ_TYPE_EDGE_RISING>;
-
-				interrupt-controller;
-				#interrupt-cells = <2>;
-
-				tc3589x_gpio: tc3589x_gpio {
-					compatible = "tc3589x-gpio";
-					interrupts = <0 IRQ_TYPE_EDGE_RISING>;
-
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-			};
-		};
-
 		i2c@80128000 {
 			lp5521@33 {
 				compatible = "national,lp5521";

arch/arm/boot/dts/ste-hrefprev60.dts

@@ -30,6 +30,26 @@ tps61052@33 {
 				compatible = "tps61052";
 				reg = <0x33>;
 			};
+
+			tc3589x@42 {
+				compatible = "tc3589x";
+				reg = <0x42>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				tc3589x_gpio: tc3589x_gpio {
+					compatible = "tc3589x-gpio";
+					interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
 		};
 
 		i2c@80110000 {