Commit d6661da8 authored by Rafał Miłecki's avatar Rafał Miłecki Committed by Florian Fainelli

ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2

This is BCM47081A0 based home router with BCM43217 and BCM4352 wireless
chipsets.
Signed-off-by: default avatarRafał Miłecki <rafal@milecki.pl>
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
parent 6822d772
...@@ -88,6 +88,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ ...@@ -88,6 +88,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47081-buffalo-wzr-900dhp.dtb \ bcm47081-buffalo-wzr-900dhp.dtb \
bcm47081-luxul-xap-1410.dtb \ bcm47081-luxul-xap-1410.dtb \
bcm47081-luxul-xwr-1200.dtb \ bcm47081-luxul-xwr-1200.dtb \
bcm47081-tplink-archer-c5-v2.dtb \
bcm4709-asus-rt-ac87u.dtb \ bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \ bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-linksys-ea9200.dtb \ bcm4709-linksys-ea9200.dtb \
......
/*
* Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
*
* Licensed under the ISC license.
*/
/dts-v1/;
#include "bcm47081.dtsi"
/ {
compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708";
model = "TP-LINK Archer C5 V2";
chosen {
bootargs = "earlycon";
};
memory {
reg = <0x00000000 0x08000000>;
};
leds {
compatible = "gpio-leds";
2ghz {
label = "bcm53xx:green:2ghz";
gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
lan {
label = "bcm53xx:green:lan";
gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
};
usb2-port1 {
label = "bcm53xx:green:usb2-port1";
gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
};
power {
label = "bcm53xx:green:power";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
wan-green {
label = "bcm53xx:green:wan";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
};
wps {
label = "bcm53xx:green:wps";
gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
};
wan-amber {
label = "bcm53xx:amber:wan";
gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
};
5ghz {
label = "bcm53xx:green:5ghz";
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
};
usb2-port2 {
label = "bcm53xx:green:usb2-port2";
gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
};
restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
};
};
};
&spi_nor {
status = "okay";
};
&usb2 {
vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment