ASoC: mxs: add some error messages to help identifying problems

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

sound/soc/mxs/mxs-sgtl5000.c

@@ -50,18 +50,27 @@ static int mxs_sgtl5000_hw_params(struct snd_pcm_substream *substream,
 	}
 
 	/* Sgtl5000 sysclk should be >= 8MHz and <= 27M */
-	if (mclk < 8000000 || mclk > 27000000)
+	if (mclk < 8000000 || mclk > 27000000) {
+		dev_err(codec_dai->dev, "Invalid mclk frequency: %u.%03uMHz\n",
+			mclk / 1000000, mclk / 1000 % 1000);
 		return -EINVAL;
+	}
 
 	/* Set SGTL5000's SYSCLK (provided by SAIF MCLK) */
 	ret = snd_soc_dai_set_sysclk(codec_dai, SGTL5000_SYSCLK, mclk, 0);
-	if (ret)
+	if (ret) {
+		dev_err(codec_dai->dev, "Failed to set sysclk to %u.%03uMHz\n",
+			mclk / 1000000, mclk / 1000 % 1000);
 		return ret;
+	}
 
 	/* The SAIF MCLK should be the same as SGTL5000_SYSCLK */
 	ret = snd_soc_dai_set_sysclk(cpu_dai, MXS_SAIF_MCLK, mclk, 0);
-	if (ret)
+	if (ret) {
+		dev_err(cpu_dai->dev, "Failed to set sysclk to %u.%03uMHz\n",
+			mclk / 1000000, mclk / 1000 % 1000);
 		return ret;
+	}
 
 	/* set codec to slave mode */
 	dai_format = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
@@ -69,13 +78,19 @@ static int mxs_sgtl5000_hw_params(struct snd_pcm_substream *substream,
 
 	/* set codec DAI configuration */
 	ret = snd_soc_dai_set_fmt(codec_dai, dai_format);
-	if (ret)
+	if (ret) {
+		dev_err(codec_dai->dev, "Failed to set dai format to %08x\n",
+			dai_format);
 		return ret;
+	}
 
 	/* set cpu DAI configuration */
 	ret = snd_soc_dai_set_fmt(cpu_dai, dai_format);
-	if (ret)
+	if (ret) {
+		dev_err(cpu_dai->dev, "Failed to set dai format to %08x\n",
+			dai_format);
 		return ret;
+	}
 
 	return 0;
 }
@@ -153,8 +168,10 @@ static int mxs_sgtl5000_probe(struct platform_device *pdev)
 	 * should be >= 8MHz and <= 27M.
 	 */
 	ret = mxs_saif_get_mclk(0, 44100 * 256, 44100);
-	if (ret)
+	if (ret) {
+		dev_err(&pdev->dev, "failed to get mclk\n");
 		return ret;
+	}
 
 	card->dev = &pdev->dev;
 	platform_set_drvdata(pdev, card);