Commit d71c11f3 authored by Sascha Hauer's avatar Sascha Hauer Committed by Matthias Brugger

soc: mediatek: PMIC wrap: Fix clock rate handling

replace chipselect extension values based on SPI clock with hardcoded SoC
specific values.

The PMIC wrapper has the ability of extending the chipselects by configurable
amounts of time. We configured the values based on the rate of SPI clock, but
this is wrong. The delays should be configured based on the internal PMIC clock
that latches the values from the SPI bus to the internal PMIC registers. By
default this clock is 24MHz. Other clock frequencies are for debugging only
and can be removed from the driver.
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: default avatarMatthias Brugger <matthias.bgg@gmail.com>
parent b787f68c
......@@ -563,45 +563,17 @@ static int pwrap_init_sidly(struct pmic_wrapper *wrp)
static int pwrap_init_reg_clock(struct pmic_wrapper *wrp)
{
unsigned long rate_spi;
int ck_mhz;
rate_spi = clk_get_rate(wrp->clk_spi);
if (rate_spi > 26000000)
ck_mhz = 26;
else if (rate_spi > 18000000)
ck_mhz = 18;
else
ck_mhz = 0;
switch (ck_mhz) {
case 18:
if (pwrap_is_mt8135(wrp))
pwrap_writel(wrp, 0xc, PWRAP_CSHEXT);
pwrap_writel(wrp, 0x4, PWRAP_CSHEXT_WRITE);
pwrap_writel(wrp, 0xc, PWRAP_CSHEXT_READ);
pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_START);
pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_END);
break;
case 26:
if (pwrap_is_mt8135(wrp))
pwrap_writel(wrp, 0x4, PWRAP_CSHEXT);
if (pwrap_is_mt8135(wrp)) {
pwrap_writel(wrp, 0x4, PWRAP_CSHEXT);
pwrap_writel(wrp, 0x0, PWRAP_CSHEXT_WRITE);
pwrap_writel(wrp, 0x4, PWRAP_CSHEXT_READ);
pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_START);
pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_END);
break;
case 0:
if (pwrap_is_mt8135(wrp))
pwrap_writel(wrp, 0xf, PWRAP_CSHEXT);
pwrap_writel(wrp, 0xf, PWRAP_CSHEXT_WRITE);
pwrap_writel(wrp, 0xf, PWRAP_CSHEXT_READ);
pwrap_writel(wrp, 0xf, PWRAP_CSLEXT_START);
pwrap_writel(wrp, 0xf, PWRAP_CSLEXT_END);
break;
default:
return -EINVAL;
} else {
pwrap_writel(wrp, 0x0, PWRAP_CSHEXT_WRITE);
pwrap_writel(wrp, 0x4, PWRAP_CSHEXT_READ);
pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_START);
pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_END);
}
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment