i2c: emev2: avoid race when unregistering slave client

After we disabled interrupts, there might still be an active one
running. Sync before clearing the pointer to the slave device.

Fixes: c31d0a00 ("i2c: emev2: add slave support")
Reported-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

drivers/i2c/busses/i2c-emev2.c

@@ -69,6 +69,7 @@ struct em_i2c_device {
 	struct completion msg_done;
 	struct clk *sclk;
 	struct i2c_client *slave;
+	int irq;
 };
 
 static inline void em_clear_set_bit(struct em_i2c_device *priv, u8 clear, u8 set, u8 reg)
@@ -339,6 +340,12 @@ static int em_i2c_unreg_slave(struct i2c_client *slave)
 
 	writeb(0, priv->base + I2C_OFS_SVA0);
 
+	/*
+	 * Wait for interrupt to finish. New slave irqs cannot happen because we
+	 * cleared the slave address and, thus, only extension codes will be
+	 * detected which do not use the slave ptr.
+	 */
+	synchronize_irq(priv->irq);
 	priv->slave = NULL;
 
 	return 0;
@@ -355,7 +362,7 @@ static int em_i2c_probe(struct platform_device *pdev)
 {
 	struct em_i2c_device *priv;
 	struct resource *r;
-	int irq, ret;
+	int ret;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -390,8 +397,8 @@ static int em_i2c_probe(struct platform_device *pdev)
 
 	em_i2c_reset(&priv->adap);
 
-	irq = platform_get_irq(pdev, 0);
-	ret = devm_request_irq(&pdev->dev, irq, em_i2c_irq_handler, 0,
+	priv->irq = platform_get_irq(pdev, 0);
+	ret = devm_request_irq(&pdev->dev, priv->irq, em_i2c_irq_handler, 0,
 				"em_i2c", priv);
 	if (ret)
 		goto err_clk;
@@ -401,7 +408,8 @@ static int em_i2c_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_clk;
 
-	dev_info(&pdev->dev, "Added i2c controller %d, irq %d\n", priv->adap.nr, irq);
+	dev_info(&pdev->dev, "Added i2c controller %d, irq %d\n", priv->adap.nr,
+		 priv->irq);
 
 	return 0;