Commit d7c0dcb6 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: pcl711: fix 8254 timer programming

As pointed out by Ian Abbott, the i8254_load() function does not
use the I8254_MODE* values to specify the "mode".

Refactor the 8254 timer programming to use the i8254_set_mode()
and i8254_write() helpers instead of i8254_load(). This allows
us to use the I8254_MODE* defines to clarify the code.

For aesthetics, factor the timer programming out as a separate
function.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 241f1c96
......@@ -360,6 +360,18 @@ static int pcl711_ai_cmdtest(struct comedi_device *dev,
return 0;
}
static void pcl711_ai_load_counters(struct comedi_device *dev)
{
struct pcl711_private *devpriv = dev->private;
unsigned long timer_base = dev->iobase + PCL711_TIMER_BASE;
i8254_set_mode(timer_base, 0, 1, I8254_MODE2 | I8254_BINARY);
i8254_set_mode(timer_base, 0, 2, I8254_MODE2 | I8254_BINARY);
i8254_write(timer_base, 0, 1, devpriv->divisor1);
i8254_write(timer_base, 0, 2, devpriv->divisor2);
}
static int pcl711_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
struct pcl711_private *devpriv = dev->private;
......@@ -378,13 +390,8 @@ static int pcl711_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
}
if (cmd->scan_begin_src == TRIG_TIMER) {
i8254_load(dev->iobase + PCL711_TIMER_BASE, 0,
1, devpriv->divisor1, I8254_MODE2 | I8254_BINARY);
i8254_load(dev->iobase + PCL711_TIMER_BASE, 0,
2, devpriv->divisor2, I8254_MODE2 | I8254_BINARY);
pcl711_ai_load_counters(dev);
outb(PCL711_INT_STAT_CLR, dev->iobase + PCL711_INT_STAT_REG);
pcl711_ai_set_mode(dev, PCL711_MODE_PACER_IRQ);
} else {
pcl711_ai_set_mode(dev, PCL711_MODE_EXT_IRQ);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment