Commit d7c1a9a0 authored by Aloka Dixit's avatar Aloka Dixit Committed by Johannes Berg

wifi: nl80211: validate and configure puncturing bitmap

- New feature flag, NL80211_EXT_FEATURE_PUNCT, to advertise
  driver support for preamble puncturing in AP mode.
- New attribute, NL80211_ATTR_PUNCT_BITMAP, to receive a puncturing
  bitmap from the userspace during AP bring up (NL80211_CMD_START_AP)
  and channel switch (NL80211_CMD_CHANNEL_SWITCH) operations. Each bit
  corresponds to a 20 MHz channel in the operating bandwidth, lowest
  bit for the lowest channel. Bit set to 1 indicates that the channel
  is punctured. Higher 16 bits are reserved.
- New members added to structures cfg80211_ap_settings and
  cfg80211_csa_settings to propagate the bitmap to the driver after
  validation.
Signed-off-by: default avatarAloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: default avatarMuna Sinada <quic_msinada@quicinc.com>
Link: https://lore.kernel.org/r/20230131001227.25014-3-quic_alokad@quicinc.com
[move validation against 0xffff into policy]
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
parent b25413fe
......@@ -1316,6 +1316,9 @@ struct cfg80211_unsol_bcast_probe_resp {
* @fils_discovery: FILS discovery transmission parameters
* @unsol_bcast_probe_resp: Unsolicited broadcast probe response parameters
* @mbssid_config: AP settings for multiple bssid
* @punct_bitmap: Preamble puncturing bitmap. Each bit represents
* a 20 MHz channel, lowest bit corresponding to the lowest channel.
* Bit set to 1 indicates that the channel is punctured.
*/
struct cfg80211_ap_settings {
struct cfg80211_chan_def chandef;
......@@ -1350,6 +1353,7 @@ struct cfg80211_ap_settings {
struct cfg80211_fils_discovery fils_discovery;
struct cfg80211_unsol_bcast_probe_resp unsol_bcast_probe_resp;
struct cfg80211_mbssid_config mbssid_config;
u16 punct_bitmap;
};
/**
......@@ -1367,6 +1371,9 @@ struct cfg80211_ap_settings {
* @radar_required: whether radar detection is required on the new channel
* @block_tx: whether transmissions should be blocked while changing
* @count: number of beacons until switch
* @punct_bitmap: Preamble puncturing bitmap. Each bit represents
* a 20 MHz channel, lowest bit corresponding to the lowest channel.
* Bit set to 1 indicates that the channel is punctured.
*/
struct cfg80211_csa_settings {
struct cfg80211_chan_def chandef;
......@@ -1379,6 +1386,7 @@ struct cfg80211_csa_settings {
bool radar_required;
bool block_tx;
u8 count;
u16 punct_bitmap;
};
/**
......
......@@ -2769,6 +2769,12 @@ enum nl80211_commands {
* the incoming frame RX timestamp.
* @NL80211_ATTR_TD_BITMAP: Transition Disable bitmap, for subsequent
* (re)associations.
*
* @NL80211_ATTR_PUNCT_BITMAP: (u32) Preamble puncturing bitmap, lowest
* bit corresponds to the lowest 20 MHz channel. Each bit set to 1
* indicates that the sub-channel is punctured. Higher 16 bits are
* reserved.
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
......@@ -3298,6 +3304,8 @@ enum nl80211_attrs {
NL80211_ATTR_RX_HW_TIMESTAMP,
NL80211_ATTR_TD_BITMAP,
NL80211_ATTR_PUNCT_BITMAP,
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
......@@ -6313,6 +6321,8 @@ enum nl80211_feature_flags {
* might apply, e.g. no scans in progress, no offchannel operations
* in progress, and no active connections.
*
* @NL80211_EXT_FEATURE_PUNCT: Driver supports preamble puncturing in AP mode.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
......@@ -6381,6 +6391,7 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD,
NL80211_EXT_FEATURE_RADAR_BACKGROUND,
NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE,
NL80211_EXT_FEATURE_PUNCT,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
......
......@@ -805,6 +805,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_MLD_ADDR] = NLA_POLICY_EXACT_LEN(ETH_ALEN),
[NL80211_ATTR_MLO_SUPPORT] = { .type = NLA_FLAG },
[NL80211_ATTR_MAX_NUM_AKM_SUITES] = { .type = NLA_REJECT },
[NL80211_ATTR_PUNCT_BITMAP] = NLA_POLICY_RANGE(NLA_U8, 0, 0xffff),
};
/* policy for the key attributes */
......@@ -3173,6 +3174,21 @@ static bool nl80211_can_set_dev_channel(struct wireless_dev *wdev)
wdev->iftype == NL80211_IFTYPE_P2P_GO;
}
static int nl80211_parse_punct_bitmap(struct cfg80211_registered_device *rdev,
struct genl_info *info,
const struct cfg80211_chan_def *chandef,
u16 *punct_bitmap)
{
if (!wiphy_ext_feature_isset(&rdev->wiphy, NL80211_EXT_FEATURE_PUNCT))
return -EINVAL;
*punct_bitmap = nla_get_u32(info->attrs[NL80211_ATTR_PUNCT_BITMAP]);
if (!cfg80211_valid_disable_subchannel_bitmap(punct_bitmap, chandef))
return -EINVAL;
return 0;
}
int nl80211_parse_chandef(struct cfg80211_registered_device *rdev,
struct genl_info *info,
struct cfg80211_chan_def *chandef)
......@@ -5957,6 +5973,14 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
goto out;
}
if (info->attrs[NL80211_ATTR_PUNCT_BITMAP]) {
err = nl80211_parse_punct_bitmap(rdev, info,
&params->chandef,
&params->punct_bitmap);
if (err)
goto out;
}
if (!cfg80211_reg_can_beacon_relax(&rdev->wiphy, &params->chandef,
wdev->iftype)) {
err = -EINVAL;
......@@ -10114,6 +10138,14 @@ static int nl80211_channel_switch(struct sk_buff *skb, struct genl_info *info)
if (info->attrs[NL80211_ATTR_CH_SWITCH_BLOCK_TX])
params.block_tx = true;
if (info->attrs[NL80211_ATTR_PUNCT_BITMAP]) {
err = nl80211_parse_punct_bitmap(rdev, info,
&params.chandef,
&params.punct_bitmap);
if (err)
goto free;
}
wdev_lock(wdev);
err = rdev_channel_switch(rdev, dev, &params);
wdev_unlock(wdev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment