Merge branch 'bond_vlan'

Veaceslav Falico says:

====================
bonding: remove vlan special handling

v1: Per Jiri's advice, remove the exported netdev_upper struct to keep it
    inside dev.c only, and instead implement a macro to iterate over the
    list and return only net_device *.
v2: Jiri noted that we need to see every upper device, but not only the
    first level. Modify the netdev_upper logic to include a list of lower
    devices and for both upper/lower lists every device would see both its
    first-level devices and every other devices that is lower/upper of it.
    Also, convert some annoying spamming warnings to pr_debug in
    bond_arp_send_all.
v3: move renaming part completely to patch 1 (did I forget to git add
    before commiting?) and address Jiri's input about comments/style of
    patch 2.
v4: as Vlad found spotted, bond_arp_send_all() won't work in a config where
    we have a device with ip on top of our upper vlan. It fails to send
    packets because we don't tag the packet, while the device on top of
    vlan will emit tagged packets through this vlan. Fix this by first
    searching for all upper vlans, and for each vlan - for the devs on top
    of it. If we find the dev - then tag the packet with the underling's
    vlan_id, otherwise just search the old way - for all devices on top of
    bonding. Also, move the version changes under "---" so they won't get
    into the commit message, if/when applied.

The aim of this patchset is to remove bondings' own vlan handling as much
as possible and replace it with the netdev upper device functionality.

The upper device functionality is extended to include also lower devices
and to have, for each device, a full view of every lower and upper device,
but not only the first-level ones. This might permit in the future to
avoid, for any grouping/teaming/upper/lower devices, to maintain its own
lists of slaves/vlans/etc.

This is achieved by adding a helper function to upper dev list handling -
netdev_upper_get_next_dev(dev, iter), which returns the next device after
the list_head **iter, and sets *iter to the next list_head *. This patchset
also adds netdev_for_each_upper_dev(dev, upper, iter), which iterates
through the whole dev->upper_dev_list, setting upper to the net_device.
The only special treatment of vlans remains in rlb code.

This patchset solves several issues with bonding, simplifies it overall,
RCUify further and exports upper list functions for any other users which
might also want to get rid of its own vlan_lists or slaves.

I'm testing it continuously currently, no issues found, will update on
anything.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/bonding/bond_alb.c

@@ -971,58 +971,62 @@ static void rlb_clear_vlan(struct bonding *bond, unsigned short vlan_id)
 
 /*********************** tlb/rlb shared functions *********************/
 
-static void alb_send_learning_packets(struct slave *slave, u8 mac_addr[])
+static void alb_send_lp_vid(struct slave *slave, u8 mac_addr[],
+			    u16 vid)
 {
-	struct bonding *bond = bond_get_bond_by_slave(slave);
 	struct learning_pkt pkt;
+	struct sk_buff *skb;
 	int size = sizeof(struct learning_pkt);
-	int i;
+	char *data;
 
 	memset(&pkt, 0, size);
 	memcpy(pkt.mac_dst, mac_addr, ETH_ALEN);
 	memcpy(pkt.mac_src, mac_addr, ETH_ALEN);
 	pkt.type = cpu_to_be16(ETH_P_LOOP);
 
-	for (i = 0; i < MAX_LP_BURST; i++) {
-		struct sk_buff *skb;
-		char *data;
+	skb = dev_alloc_skb(size);
+	if (!skb)
+		return;
+
+	data = skb_put(skb, size);
+	memcpy(data, &pkt, size);
 
-		skb = dev_alloc_skb(size);
+	skb_reset_mac_header(skb);
+	skb->network_header = skb->mac_header + ETH_HLEN;
+	skb->protocol = pkt.type;
+	skb->priority = TC_PRIO_CONTROL;
+	skb->dev = slave->dev;
+
+	if (vid) {
+		skb = vlan_put_tag(skb, htons(ETH_P_8021Q), vid);
 		if (!skb) {
+			pr_err("%s: Error: failed to insert VLAN tag\n",
+			       slave->bond->dev->name);
 			return;
 		}
+	}
 
-		data = skb_put(skb, size);
-		memcpy(data, &pkt, size);
-
-		skb_reset_mac_header(skb);
-		skb->network_header = skb->mac_header + ETH_HLEN;
-		skb->protocol = pkt.type;
-		skb->priority = TC_PRIO_CONTROL;
-		skb->dev = slave->dev;
-
-		if (bond_vlan_used(bond)) {
-			struct vlan_entry *vlan;
+	dev_queue_xmit(skb);
+}
 
-			vlan = bond_next_vlan(bond,
-					      bond->alb_info.current_alb_vlan);
 
-			bond->alb_info.current_alb_vlan = vlan;
-			if (!vlan) {
-				kfree_skb(skb);
-				continue;
-			}
+static void alb_send_learning_packets(struct slave *slave, u8 mac_addr[])
+{
+	struct bonding *bond = bond_get_bond_by_slave(slave);
+	struct net_device *upper;
+	struct list_head *iter;
 
-			skb = vlan_put_tag(skb, htons(ETH_P_8021Q), vlan->vlan_id);
-			if (!skb) {
-				pr_err("%s: Error: failed to insert VLAN tag\n",
-				       bond->dev->name);
-				continue;
-			}
-		}
+	/* send untagged */
+	alb_send_lp_vid(slave, mac_addr, 0);
 
-		dev_queue_xmit(skb);
+	/* loop through vlans and send one packet for each */
+	rcu_read_lock();
+	netdev_for_each_upper_dev_rcu(bond->dev, upper, iter) {
+		if (upper->priv_flags & IFF_802_1Q_VLAN)
+			alb_send_lp_vid(slave, mac_addr,
+					vlan_dev_vlan_id(upper));
 	}
+	rcu_read_unlock();
 }
 
 static int alb_set_slave_mac_addr(struct slave *slave, u8 addr[])
@@ -1759,11 +1763,6 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr)
 
 void bond_alb_clear_vlan(struct bonding *bond, unsigned short vlan_id)
 {
-	if (bond->alb_info.current_alb_vlan &&
-	    (bond->alb_info.current_alb_vlan->vlan_id == vlan_id)) {
-		bond->alb_info.current_alb_vlan = NULL;
-	}
-
 	if (bond->alb_info.rlb_enabled) {
 		rlb_clear_vlan(bond, vlan_id);
 	}

drivers/net/bonding/bond_alb.h

@@ -53,7 +53,6 @@ struct slave;
 
 
 #define TLB_NULL_INDEX		0xffffffff
-#define MAX_LP_BURST		3
 
 /* rlb defs */
 #define RLB_HASH_TABLE_SIZE	256
@@ -170,7 +169,6 @@ struct alb_bond_info {
 						 * rx traffic should be
 						 * rebalanced
 						 */
-	struct vlan_entry	*current_alb_vlan;
 };
 
 int bond_alb_initialize(struct bonding *bond, int rlb_enabled);

drivers/net/bonding/bond_main.c

@@ -282,116 +282,6 @@ const char *bond_mode_name(int mode)
 
 /*---------------------------------- VLAN -----------------------------------*/
 
-/**
- * bond_add_vlan - add a new vlan id on bond
- * @bond: bond that got the notification
- * @vlan_id: the vlan id to add
- *
- * Returns -ENOMEM if allocation failed.
- */
-static int bond_add_vlan(struct bonding *bond, unsigned short vlan_id)
-{
-	struct vlan_entry *vlan;
-
-	pr_debug("bond: %s, vlan id %d\n",
-		 (bond ? bond->dev->name : "None"), vlan_id);
-
-	vlan = kzalloc(sizeof(struct vlan_entry), GFP_KERNEL);
-	if (!vlan)
-		return -ENOMEM;
-
-	INIT_LIST_HEAD(&vlan->vlan_list);
-	vlan->vlan_id = vlan_id;
-
-	write_lock_bh(&bond->lock);
-
-	list_add_tail(&vlan->vlan_list, &bond->vlan_list);
-
-	write_unlock_bh(&bond->lock);
-
-	pr_debug("added VLAN ID %d on bond %s\n", vlan_id, bond->dev->name);
-
-	return 0;
-}
-
-/**
- * bond_del_vlan - delete a vlan id from bond
- * @bond: bond that got the notification
- * @vlan_id: the vlan id to delete
- *
- * returns -ENODEV if @vlan_id was not found in @bond.
- */
-static int bond_del_vlan(struct bonding *bond, unsigned short vlan_id)
-{
-	struct vlan_entry *vlan;
-	int res = -ENODEV;
-
-	pr_debug("bond: %s, vlan id %d\n", bond->dev->name, vlan_id);
-
-	block_netpoll_tx();
-	write_lock_bh(&bond->lock);
-
-	list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
-		if (vlan->vlan_id == vlan_id) {
-			list_del(&vlan->vlan_list);
-
-			if (bond_is_lb(bond))
-				bond_alb_clear_vlan(bond, vlan_id);
-
-			pr_debug("removed VLAN ID %d from bond %s\n",
-				 vlan_id, bond->dev->name);
-
-			kfree(vlan);
-
-			res = 0;
-			goto out;
-		}
-	}
-
-	pr_debug("couldn't find VLAN ID %d in bond %s\n",
-		 vlan_id, bond->dev->name);
-
-out:
-	write_unlock_bh(&bond->lock);
-	unblock_netpoll_tx();
-	return res;
-}
-
-/**
- * bond_next_vlan - safely skip to the next item in the vlans list.
- * @bond: the bond we're working on
- * @curr: item we're advancing from
- *
- * Returns %NULL if list is empty, bond->next_vlan if @curr is %NULL,
- * or @curr->next otherwise (even if it is @curr itself again).
- *
- * Caller must hold bond->lock
- */
-struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr)
-{
-	struct vlan_entry *next, *last;
-
-	if (list_empty(&bond->vlan_list))
-		return NULL;
-
-	if (!curr) {
-		next = list_entry(bond->vlan_list.next,
-				  struct vlan_entry, vlan_list);
-	} else {
-		last = list_entry(bond->vlan_list.prev,
-				  struct vlan_entry, vlan_list);
-		if (last == curr) {
-			next = list_entry(bond->vlan_list.next,
-					  struct vlan_entry, vlan_list);
-		} else {
-			next = list_entry(curr->vlan_list.next,
-					  struct vlan_entry, vlan_list);
-		}
-	}
-
-	return next;
-}
-
 /**
  * bond_dev_queue_xmit - Prepare skb for xmit.
  *
@@ -451,13 +341,6 @@ static int bond_vlan_rx_add_vid(struct net_device *bond_dev,
 			goto unwind;
 	}
 
-	res = bond_add_vlan(bond, vid);
-	if (res) {
-		pr_err("%s: Error: Failed to add vlan id %d\n",
-		       bond_dev->name, vid);
-		goto unwind;
-	}
-
 	return 0;
 
 unwind:
@@ -478,17 +361,12 @@ static int bond_vlan_rx_kill_vid(struct net_device *bond_dev,
 {
 	struct bonding *bond = netdev_priv(bond_dev);
 	struct slave *slave;
-	int res;
 
 	bond_for_each_slave(bond, slave)
 		vlan_vid_del(slave->dev, proto, vid);
 
-	res = bond_del_vlan(bond, vid);
-	if (res) {
-		pr_err("%s: Error: Failed to remove vlan id %d\n",
-		       bond_dev->name, vid);
-		return res;
-	}
+	if (bond_is_lb(bond))
+		bond_alb_clear_vlan(bond, vid);
 
 	return 0;
 }
@@ -1954,7 +1832,7 @@ static int __bond_release_one(struct net_device *bond_dev,
 		bond_set_carrier(bond);
 		eth_hw_addr_random(bond_dev);
 
-		if (bond_vlan_used(bond)) {
+		if (vlan_uses_dev(bond_dev)) {
 			pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
 				   bond_dev->name, bond_dev->name);
 			pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
@@ -2392,24 +2270,25 @@ void bond_mii_monitor(struct work_struct *work)
 	}
 }
 
-static int bond_has_this_ip(struct bonding *bond, __be32 ip)
+static bool bond_has_this_ip(struct bonding *bond, __be32 ip)
 {
-	struct vlan_entry *vlan;
-	struct net_device *vlan_dev;
+	struct net_device *upper;
+	struct list_head *iter;
+	bool ret = false;
 
 	if (ip == bond_confirm_addr(bond->dev, 0, ip))
-		return 1;
+		return true;
 
-	list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
-		rcu_read_lock();
-		vlan_dev = __vlan_find_dev_deep(bond->dev, htons(ETH_P_8021Q),
-						vlan->vlan_id);
-		rcu_read_unlock();
-		if (vlan_dev && ip == bond_confirm_addr(vlan_dev, 0, ip))
-			return 1;
+	rcu_read_lock();
+	netdev_for_each_upper_dev_rcu(bond->dev, upper, iter) {
+		if (ip == bond_confirm_addr(upper, 0, ip)) {
+			ret = true;
+			break;
+		}
 	}
+	rcu_read_unlock();
 
-	return 0;
+	return ret;
 }
 
 /*
@@ -2444,81 +2323,79 @@ static void bond_arp_send(struct net_device *slave_dev, int arp_op, __be32 dest_
 
 static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
 {
-	int i, vlan_id;
-	__be32 *targets = bond->params.arp_targets;
-	struct vlan_entry *vlan;
-	struct net_device *vlan_dev = NULL;
+	struct net_device *upper, *vlan_upper;
+	struct list_head *iter, *vlan_iter;
 	struct rtable *rt;
+	__be32 *targets = bond->params.arp_targets, addr;
+	int i, vlan_id;
 
-	for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
-		__be32 addr;
-		if (!targets[i])
-			break;
+	for (i = 0; i < BOND_MAX_ARP_TARGETS && targets[i]; i++) {
 		pr_debug("basa: target %pI4\n", &targets[i]);
-		if (!bond_vlan_used(bond)) {
-			pr_debug("basa: empty vlan: arp_send\n");
-			addr = bond_confirm_addr(bond->dev, targets[i], 0);
-			bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
-				      addr, 0);
-			continue;
-		}
 
-		/*
-		 * If VLANs are configured, we do a route lookup to
-		 * determine which VLAN interface would be used, so we
-		 * can tag the ARP with the proper VLAN tag.
-		 */
+		/* Find out through which dev should the packet go */
 		rt = ip_route_output(dev_net(bond->dev), targets[i], 0,
 				     RTO_ONLINK, 0);
 		if (IS_ERR(rt)) {
-			if (net_ratelimit()) {
-				pr_warning("%s: no route to arp_ip_target %pI4\n",
-					   bond->dev->name, &targets[i]);
-			}
+			pr_debug("%s: no route to arp_ip_target %pI4\n",
+				 bond->dev->name, &targets[i]);
 			continue;
 		}
 
-		/*
-		 * This target is not on a VLAN
+		vlan_id = 0;
+
+		/* bond device itself */
+		if (rt->dst.dev == bond->dev)
+			goto found;
+
+		rcu_read_lock();
+		/* first we search only for vlan devices. for every vlan
+		 * found we verify its upper dev list, searching for the
+		 * rt->dst.dev. If found we save the tag of the vlan and
+		 * proceed to send the packet.
+		 *
+		 * TODO: QinQ?
 		 */
-		if (rt->dst.dev == bond->dev) {
-			ip_rt_put(rt);
-			pr_debug("basa: rtdev == bond->dev: arp_send\n");
-			addr = bond_confirm_addr(bond->dev, targets[i], 0);
-			bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
-				      addr, 0);
-			continue;
+		netdev_for_each_upper_dev_rcu(bond->dev, vlan_upper, vlan_iter) {
+			if (!is_vlan_dev(vlan_upper))
+				continue;
+			netdev_for_each_upper_dev_rcu(vlan_upper, upper, iter) {
+				if (upper == rt->dst.dev) {
+					vlan_id = vlan_dev_vlan_id(vlan_upper);
+					rcu_read_unlock();
+					goto found;
+				}
+			}
 		}
 
-		vlan_id = 0;
-		list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
-			rcu_read_lock();
-			vlan_dev = __vlan_find_dev_deep(bond->dev,
-							htons(ETH_P_8021Q),
-							vlan->vlan_id);
-			rcu_read_unlock();
-			if (vlan_dev == rt->dst.dev) {
-				vlan_id = vlan->vlan_id;
-				pr_debug("basa: vlan match on %s %d\n",
-				       vlan_dev->name, vlan_id);
-				break;
+		/* if the device we're looking for is not on top of any of
+		 * our upper vlans, then just search for any dev that
+		 * matches, and in case it's a vlan - save the id
+		 */
+		netdev_for_each_upper_dev_rcu(bond->dev, upper, iter) {
+			if (upper == rt->dst.dev) {
+				/* if it's a vlan - get its VID */
+				if (is_vlan_dev(upper))
+					vlan_id = vlan_dev_vlan_id(upper);
+
+				rcu_read_unlock();
+				goto found;
 			}
 		}
+		rcu_read_unlock();
 
-		if (vlan_id && vlan_dev) {
-			ip_rt_put(rt);
-			addr = bond_confirm_addr(vlan_dev, targets[i], 0);
-			bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
-				      addr, vlan_id);
-			continue;
-		}
+		/* Not our device - skip */
+		pr_debug("%s: no path to arp_ip_target %pI4 via rt.dev %s\n",
+			 bond->dev->name, &targets[i],
+			 rt->dst.dev ? rt->dst.dev->name : "NULL");
 
-		if (net_ratelimit()) {
-			pr_warning("%s: no path to arp_ip_target %pI4 via rt.dev %s\n",
-				   bond->dev->name, &targets[i],
-				   rt->dst.dev ? rt->dst.dev->name : "NULL");
-		}
 		ip_rt_put(rt);
+		continue;
+
+found:
+		addr = bond_confirm_addr(rt->dst.dev, targets[i], 0);
+		ip_rt_put(rt);
+		bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
+			      addr, vlan_id);
 	}
 }
 
@@ -4142,7 +4019,6 @@ static void bond_setup(struct net_device *bond_dev)
 
 	/* Initialize pointers */
 	bond->dev = bond_dev;
-	INIT_LIST_HEAD(&bond->vlan_list);
 
 	/* Initialize the device entry points */
 	ether_setup(bond_dev);
@@ -4195,7 +4071,6 @@ static void bond_uninit(struct net_device *bond_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
 	struct slave *slave, *tmp_slave;
-	struct vlan_entry *vlan, *tmp;
 
 	bond_netpoll_cleanup(bond_dev);
 
@@ -4207,11 +4082,6 @@ static void bond_uninit(struct net_device *bond_dev)
 	list_del(&bond->bond_list);
 
 	bond_debug_unregister(bond);
-
-	list_for_each_entry_safe(vlan, tmp, &bond->vlan_list, vlan_list) {
-		list_del(&vlan->vlan_list);
-		kfree(vlan);
-	}
 }
 
 /*------------------------- Module initialization ---------------------------*/

drivers/net/bonding/bonding.h

@@ -185,11 +185,6 @@ struct bond_parm_tbl {
 
 #define BOND_MAX_MODENAME_LEN 20
 
-struct vlan_entry {
-	struct list_head vlan_list;
-	unsigned short vlan_id;
-};
-
 struct slave {
 	struct net_device *dev; /* first - useful for panic debug */
 	struct list_head list;
@@ -254,7 +249,6 @@ struct bonding {
 	struct   ad_bond_info ad_info;
 	struct   alb_bond_info alb_info;
 	struct   bond_params params;
-	struct   list_head vlan_list;
 	struct   workqueue_struct *wq;
 	struct   delayed_work mii_work;
 	struct   delayed_work arp_work;
@@ -267,9 +261,22 @@ struct bonding {
 #endif /* CONFIG_DEBUG_FS */
 };
 
+/* if we hold rtnl_lock() - call vlan_uses_dev() */
 static inline bool bond_vlan_used(struct bonding *bond)
 {
-	return !list_empty(&bond->vlan_list);
+	struct net_device *upper;
+	struct list_head *iter;
+
+	rcu_read_lock();
+	netdev_for_each_upper_dev_rcu(bond->dev, upper, iter) {
+		if (upper->priv_flags & IFF_802_1Q_VLAN) {
+			rcu_read_unlock();
+			return true;
+		}
+	}
+	rcu_read_unlock();
+
+	return false;
 }
 
 #define bond_slave_get_rcu(dev) \

include/linux/netdevice.h

@@ -1125,6 +1125,7 @@ struct net_device {
 	struct list_head	napi_list;
 	struct list_head	unreg_list;
 	struct list_head	upper_dev_list; /* List of upper devices */
+	struct list_head	lower_dev_list;
 
 
 	/* currently active device features */
@@ -2767,6 +2768,16 @@ extern int		bpf_jit_enable;
 extern bool netdev_has_upper_dev(struct net_device *dev,
 				 struct net_device *upper_dev);
 extern bool netdev_has_any_upper_dev(struct net_device *dev);
+extern struct net_device *netdev_upper_get_next_dev_rcu(struct net_device *dev,
+							struct list_head **iter);
+
+/* iterate through upper list, must be called under RCU read lock */
+#define netdev_for_each_upper_dev_rcu(dev, upper, iter) \
+	for (iter = &(dev)->upper_dev_list, \
+	     upper = netdev_upper_get_next_dev_rcu(dev, &(iter)); \
+	     upper; \
+	     upper = netdev_upper_get_next_dev_rcu(dev, &(iter)))
+
 extern struct net_device *netdev_master_upper_dev_get(struct net_device *dev);
 extern struct net_device *netdev_master_upper_dev_get_rcu(struct net_device *dev);
 extern int netdev_upper_dev_link(struct net_device *dev,