Commit d8e018c0 authored by Vincent Cuissard's avatar Vincent Cuissard Committed by Samuel Ortiz

NFC: nfcmrvl: update device tree bindings for Marvell NFC

Align NFC bindgins to use marvell instead of mrvl.
Signed-off-by: default avatarVincent Cuissard <cuissard@marvell.com>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent caf6e49b
......@@ -2,9 +2,9 @@
Required properties:
- compatible: Should be:
- "mrvl,nfc-uart" for UART devices
- "mrvl,nfc-i2c" for I2C devices
- "mrvl,nfc-spi" for SPI devices
- "marvell,nfc-uart" or "mrvl,nfc-uart" for UART devices
- "marvell,nfc-i2c" for I2C devices
- "marvell,nfc-spi" for SPI devices
Optional SoC specific properties:
- pinctrl-names: Contains only one value - "default".
......@@ -28,7 +28,7 @@ Example (for ARM-based BeagleBoard Black with 88W8887 on UART5):
status = "okay";
nfcmrvluart: nfcmrvluart@5 {
compatible = "mrvl,nfc-uart";
compatible = "marvell,nfc-uart";
reset-n-io = <&gpio3 16 0>;
......@@ -45,7 +45,7 @@ Example (for ARM-based BeagleBoard Black with 88W8887 on I2C1):
clock-frequency = <400000>;
nfcmrvli2c0: i2c@1 {
compatible = "mrvl,nfc-i2c";
compatible = "marvell,nfc-i2c";
reg = <0x8>;
......@@ -67,7 +67,7 @@ Example (for ARM-based BeagleBoard Black on SPI0):
&spi0 {
mrvlnfcspi0: spi@0 {
compatible = "mrvl,nfc-spi";
compatible = "marvell,nfc-spi";
reg = <0>;
......
......@@ -261,7 +261,7 @@ static int nfcmrvl_i2c_remove(struct i2c_client *client)
static const struct of_device_id of_nfcmrvl_i2c_match[] = {
{ .compatible = "mrvl,nfc-i2c", },
{ .compatible = "marvell,nfc-i2c", },
{},
};
MODULE_DEVICE_TABLE(of, of_nfcmrvl_i2c_match);
......
......@@ -199,7 +199,7 @@ static int nfcmrvl_spi_remove(struct spi_device *spi)
}
static const struct of_device_id of_nfcmrvl_spi_match[] = {
{ .compatible = "mrvl,nfc-spi", },
{ .compatible = "marvell,nfc-spi", },
{},
};
MODULE_DEVICE_TABLE(of, of_nfcmrvl_spi_match);
......
......@@ -75,9 +75,13 @@ static int nfcmrvl_uart_parse_dt(struct device_node *node,
struct device_node *matched_node;
int ret;
matched_node = of_find_compatible_node(node, NULL, "mrvl,nfc-uart");
if (!matched_node)
return -ENODEV;
matched_node = of_find_compatible_node(node, NULL, "marvell,nfc-uart");
if (!matched_node) {
matched_node = of_find_compatible_node(node, NULL,
"mrvl,nfc-uart");
if (!matched_node)
return -ENODEV;
}
ret = nfcmrvl_parse_dt(matched_node, pdata);
if (ret < 0) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment