Merge branch 'mvneta-fixes'

Gregory CLEMENT says:

====================
Few mvneta fixes

In this second version I split the last patch in two parts as
requested.

For the record the initial cover letter was:
"here is a patch set of few fixes. Without the first one, a kernel
configured with debug features ended to hang when the driver is built
as a module and is removed. This is quite is annoying for debugging!

The second patch fix a forgotten flag at the initial submission of the
driver.

The third patch is only really a cosmetic one so I have no problem to
not apply it for 4.5 and wait for 4.6.

I really would like to see the first one applied for 4.5 and for the
second I let you judge if it something needed for now or that should
wait the next release."
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/marvell/mvneta.c

@@ -1107,14 +1107,14 @@ static void mvneta_port_down(struct mvneta_port *pp)
 	do {
 		if (count++ >= MVNETA_RX_DISABLE_TIMEOUT_MSEC) {
 			netdev_warn(pp->dev,
-				    "TIMEOUT for RX stopped ! rx_queue_cmd: 0x08%x\n",
+				    "TIMEOUT for RX stopped ! rx_queue_cmd: 0x%08x\n",
 				    val);
 			break;
 		}
 		mdelay(1);
 
 		val = mvreg_read(pp, MVNETA_RXQ_CMD);
-	} while (val & 0xff);
+	} while (val & MVNETA_RXQ_ENABLE_MASK);
 
 	/* Stop Tx port activity. Check port Tx activity. Issue stop
 	 * command for active channels only
@@ -1139,14 +1139,14 @@ static void mvneta_port_down(struct mvneta_port *pp)
 		/* Check TX Command reg that all Txqs are stopped */
 		val = mvreg_read(pp, MVNETA_TXQ_CMD);
 
-	} while (val & 0xff);
+	} while (val & MVNETA_TXQ_ENABLE_MASK);
 
 	/* Double check to verify that TX FIFO is empty */
 	count = 0;
 	do {
 		if (count++ >= MVNETA_TX_FIFO_EMPTY_TIMEOUT) {
 			netdev_warn(pp->dev,
-				    "TX FIFO empty timeout status=0x08%x\n",
+				    "TX FIFO empty timeout status=0x%08x\n",
 				    val);
 			break;
 		}
@@ -3480,17 +3480,17 @@ static int mvneta_stop(struct net_device *dev)
 	struct mvneta_port *pp = netdev_priv(dev);
 
 	/* Inform that we are stopping so we don't want to setup the
-	 * driver for new CPUs in the notifiers
+	 * driver for new CPUs in the notifiers. The code of the
+	 * notifier for CPU online is protected by the same spinlock,
+	 * so when we get the lock, the notifer work is done.
 	 */
 	spin_lock(&pp->lock);
 	pp->is_stopped = true;
+	spin_unlock(&pp->lock);
+
 	mvneta_stop_dev(pp);
 	mvneta_mdio_remove(pp);
 	unregister_cpu_notifier(&pp->cpu_notifier);
-	/* Now that the notifier are unregistered, we can release le
-	 * lock
-	 */
-	spin_unlock(&pp->lock);
 	on_each_cpu(mvneta_percpu_disable, pp, true);
 	free_percpu_irq(dev->irq, pp->ports);
 	mvneta_cleanup_rxqs(pp);
@@ -4023,6 +4023,7 @@ static int mvneta_probe(struct platform_device *pdev)
 	dev->ethtool_ops = &mvneta_eth_tool_ops;
 
 	pp = netdev_priv(dev);
+	spin_lock_init(&pp->lock);
 	pp->phy_node = phy_node;
 	pp->phy_interface = phy_mode;
 
@@ -4144,7 +4145,7 @@ static int mvneta_probe(struct platform_device *pdev)
 	dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
 	dev->hw_features |= dev->features;
 	dev->vlan_features |= dev->features;
-	dev->priv_flags |= IFF_UNICAST_FLT;
+	dev->priv_flags |= IFF_UNICAST_FLT | IFF_LIVE_ADDR_CHANGE;
 	dev->gso_max_segs = MVNETA_MAX_TSO_SEGS;
 
 	err = register_netdev(dev);