Commit d9e7f0e3 authored by Dmitry Torokhov's avatar Dmitry Torokhov Committed by Bartosz Golaszewski

gpiolib: of: factor out conversion from OF flags

There are several places where we need to convert from OF flags to
"normal" GPIO_* flags, so let's introduce a helper and use it.
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarBartosz Golaszewski <brgl@bgdev.pl>
parent a2b5e207
......@@ -289,6 +289,36 @@ int of_get_named_gpio_flags(const struct device_node *np, const char *list_name,
}
EXPORT_SYMBOL_GPL(of_get_named_gpio_flags);
/* Converts gpio_lookup_flags into bitmask of GPIO_* values */
static unsigned long of_convert_gpio_flags(enum of_gpio_flags flags)
{
unsigned long lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
if (flags & OF_GPIO_ACTIVE_LOW)
lflags |= GPIO_ACTIVE_LOW;
if (flags & OF_GPIO_SINGLE_ENDED) {
if (flags & OF_GPIO_OPEN_DRAIN)
lflags |= GPIO_OPEN_DRAIN;
else
lflags |= GPIO_OPEN_SOURCE;
}
if (flags & OF_GPIO_TRANSITORY)
lflags |= GPIO_TRANSITORY;
if (flags & OF_GPIO_PULL_UP)
lflags |= GPIO_PULL_UP;
if (flags & OF_GPIO_PULL_DOWN)
lflags |= GPIO_PULL_DOWN;
if (flags & OF_GPIO_PULL_DISABLE)
lflags |= GPIO_PULL_DISABLE;
return lflags;
}
/**
* gpiod_get_from_of_node() - obtain a GPIO from an OF node
* @node: handle of the OF node
......@@ -308,26 +338,14 @@ struct gpio_desc *gpiod_get_from_of_node(const struct device_node *node,
enum gpiod_flags dflags,
const char *label)
{
unsigned long lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
unsigned long lflags;
struct gpio_desc *desc;
enum of_gpio_flags flags;
bool active_low = false;
bool single_ended = false;
bool open_drain = false;
bool transitory = false;
enum of_gpio_flags of_flags;
int ret;
desc = of_get_named_gpiod_flags(node, propname,
index, &flags);
if (!desc || IS_ERR(desc)) {
desc = of_get_named_gpiod_flags(node, propname, index, &of_flags);
if (!desc || IS_ERR(desc))
return desc;
}
active_low = flags & OF_GPIO_ACTIVE_LOW;
single_ended = flags & OF_GPIO_SINGLE_ENDED;
open_drain = flags & OF_GPIO_OPEN_DRAIN;
transitory = flags & OF_GPIO_TRANSITORY;
ret = gpiod_request(desc, label);
if (ret == -EBUSY && (dflags & GPIOD_FLAGS_BIT_NONEXCLUSIVE))
......@@ -335,27 +353,7 @@ struct gpio_desc *gpiod_get_from_of_node(const struct device_node *node,
if (ret)
return ERR_PTR(ret);
if (active_low)
lflags |= GPIO_ACTIVE_LOW;
if (single_ended) {
if (open_drain)
lflags |= GPIO_OPEN_DRAIN;
else
lflags |= GPIO_OPEN_SOURCE;
}
if (transitory)
lflags |= GPIO_TRANSITORY;
if (flags & OF_GPIO_PULL_UP)
lflags |= GPIO_PULL_UP;
if (flags & OF_GPIO_PULL_DOWN)
lflags |= GPIO_PULL_DOWN;
if (flags & OF_GPIO_PULL_DISABLE)
lflags |= GPIO_PULL_DISABLE;
lflags = of_convert_gpio_flags(of_flags);
ret = gpiod_configure_flags(desc, propname, lflags, dflags);
if (ret < 0) {
......@@ -534,25 +532,7 @@ struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
if (IS_ERR(desc))
return desc;
if (of_flags & OF_GPIO_ACTIVE_LOW)
*flags |= GPIO_ACTIVE_LOW;
if (of_flags & OF_GPIO_SINGLE_ENDED) {
if (of_flags & OF_GPIO_OPEN_DRAIN)
*flags |= GPIO_OPEN_DRAIN;
else
*flags |= GPIO_OPEN_SOURCE;
}
if (of_flags & OF_GPIO_TRANSITORY)
*flags |= GPIO_TRANSITORY;
if (of_flags & OF_GPIO_PULL_UP)
*flags |= GPIO_PULL_UP;
if (of_flags & OF_GPIO_PULL_DOWN)
*flags |= GPIO_PULL_DOWN;
if (of_flags & OF_GPIO_PULL_DISABLE)
*flags |= GPIO_PULL_DISABLE;
*flags = of_convert_gpio_flags(of_flags);
return desc;
}
......@@ -610,16 +590,7 @@ static struct gpio_desc *of_parse_own_gpio(struct device_node *np,
if (IS_ERR(desc))
return desc;
if (xlate_flags & OF_GPIO_ACTIVE_LOW)
*lflags |= GPIO_ACTIVE_LOW;
if (xlate_flags & OF_GPIO_TRANSITORY)
*lflags |= GPIO_TRANSITORY;
if (xlate_flags & OF_GPIO_PULL_UP)
*lflags |= GPIO_PULL_UP;
if (xlate_flags & OF_GPIO_PULL_DOWN)
*lflags |= GPIO_PULL_DOWN;
if (xlate_flags & OF_GPIO_PULL_DISABLE)
*lflags |= GPIO_PULL_DISABLE;
*lflags = of_convert_gpio_flags(xlate_flags);
if (of_property_read_bool(np, "input"))
*dflags |= GPIOD_IN;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment