m68knommu: force setting of CONFIG_CLOCK_FREQ for ColdFire

It is possible to disable the clock selection at configuration time,
but for ColdFire targets we always expect a clock frequency to be
selected. This results in the following compile time error:

  CC      arch/m68k/kernel/asm-offsets.s
In file included from ./arch/m68k/include/asm/timex.h:14:0,
                 from include/linux/timex.h:65,
                 from include/linux/sched.h:19,
                 from arch/m68k/kernel/asm-offsets.c:14:
./arch/m68k/include/asm/coldfire.h:25:2: error: #error "Don't know what your ColdFire CPU clock frequency is??"

Remove CONFIG_CLOCK_SELECT completely and always enable CONFIG_CLOCK_FREQ
for ColdFire.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>

arch/m68k/Kconfig.cpu

@@ -416,22 +416,10 @@ config HAVE_MBAR
 config HAVE_IPSBAR
 	bool
 
-config CLOCK_SET
-	bool "Enable setting the CPU clock frequency"
-	depends on COLDFIRE
-	default n
-	help
-	  On some CPU's you do not need to know what the core CPU clock
-	  frequency is. On these you can disable clock setting. On some
-	  traditional 68K parts, and on all ColdFire parts you need to set
-	  the appropriate CPU clock frequency. On these devices many of the
-	  onboard peripherals derive their timing from the master CPU clock
-	  frequency.
-
 config CLOCK_FREQ
 	int "Set the core clock frequency"
 	default "66666666"
-	depends on CLOCK_SET
+	depends on COLDFIRE
 	help
 	  Define the CPU clock frequency in use. This is the core clock
 	  frequency, it may or may not be the same as the external clock

arch/m68k/include/asm/coldfire.h

@@ -19,7 +19,7 @@
  *	in any case new boards come along from time to time that have yet
  *	another different clocking frequency.
  */
-#ifdef CONFIG_CLOCK_SET
+#ifdef CONFIG_CLOCK_FREQ
 #define	MCF_CLK		CONFIG_CLOCK_FREQ
 #else
 #error "Don't know what your ColdFire CPU clock frequency is??"