Commit da3522f8 authored by Mark Brown's avatar Mark Brown

Merge remote-tracking branch 'regulator/topic/tps6507x' into regulator-next

parents b67a2ecb 0ce7d00d
TPS6507x Power Management Integrated Circuit
Required properties:
- compatible: "ti,tps6507x"
- reg: I2C slave address
- regulators: This is the list of child nodes that specify the regulator
initialization data for defined regulators. Not all regulators for the
given device need to be present. The definition for each of these nodes
is defined using the standard binding for regulators found at
Documentation/devicetree/bindings/regulator/regulator.txt.
The regulator is matched with the regulator-compatible.
The valid regulator-compatible values are:
tps6507x: vdcdc1, vdcdc2, vdcdc3, vldo1, vldo2
- xxx-supply: Input voltage supply regulator.
These entries are required if regulators are enabled for a device.
Missing of these properties can cause the regulator registration
fails.
If some of input supply is powered through battery or always-on
supply then also it is require to have these parameters with proper
node handle of always on power supply.
tps6507x:
vindcdc1_2-supply: VDCDC1 and VDCDC2 input.
vindcdc3-supply : VDCDC3 input.
vldo1_2-supply : VLDO1 and VLDO2 input.
Regulator Optional properties:
- defdcdc_default: It's property of DCDC2 and DCDC3 regulators.
0: If defdcdc pin of DCDC2/DCDC3 is pulled to GND.
1: If defdcdc pin of DCDC2/DCDC3 is driven HIGH.
If this property is not defined, it defaults to 0 (not enabled).
Example:
pmu: tps6507x@48 {
compatible = "ti,tps6507x";
reg = <0x48>;
vindcdc1_2-supply = <&vbat>;
vindcdc3-supply = <...>;
vinldo1_2-supply = <...>;
regulators {
#address-cells = <1>;
#size-cells = <0>;
vdcdc1_reg: regulator@0 {
regulator-compatible = "VDCDC1";
reg = <0>;
regulator-min-microvolt = <3150000>;
regulator-max-microvolt = <3450000>;
regulator-always-on;
regulator-boot-on;
};
vdcdc2_reg: regulator@1 {
regulator-compatible = "VDCDC2";
reg = <1>;
regulator-min-microvolt = <1710000>;
regulator-max-microvolt = <3450000>;
regulator-always-on;
regulator-boot-on;
defdcdc_default = <1>;
};
vdcdc3_reg: regulator@2 {
regulator-compatible = "VDCDC3";
reg = <2>;
regulator-min-microvolt = <950000>
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
defdcdc_default = <1>;
};
ldo1_reg: regulator@3 {
regulator-compatible = "LDO1";
reg = <3>;
regulator-min-microvolt = <1710000>;
regulator-max-microvolt = <1890000>;
regulator-always-on;
regulator-boot-on;
};
ldo2_reg: regulator@4 {
regulator-compatible = "LDO2";
reg = <4>;
regulator-min-microvolt = <1140000>;
regulator-max-microvolt = <1320000>;
regulator-always-on;
regulator-boot-on;
};
};
};
......@@ -23,8 +23,10 @@
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/tps6507x.h>
#include <linux/of.h>
#include <linux/slab.h>
#include <linux/mfd/tps6507x.h>
#include <linux/regulator/of_regulator.h>
/* DCDC's */
#define TPS6507X_DCDC_1 0
......@@ -356,6 +358,80 @@ static struct regulator_ops tps6507x_pmic_ops = {
.list_voltage = regulator_list_voltage_table,
};
#ifdef CONFIG_OF
static struct of_regulator_match tps6507x_matches[] = {
{ .name = "VDCDC1"},
{ .name = "VDCDC2"},
{ .name = "VDCDC3"},
{ .name = "LDO1"},
{ .name = "LDO2"},
};
static struct tps6507x_board *tps6507x_parse_dt_reg_data(
struct platform_device *pdev,
struct of_regulator_match **tps6507x_reg_matches)
{
struct tps6507x_board *tps_board;
struct device_node *np = pdev->dev.parent->of_node;
struct device_node *regulators;
struct of_regulator_match *matches;
static struct regulator_init_data *reg_data;
int idx = 0, count, ret;
tps_board = devm_kzalloc(&pdev->dev, sizeof(*tps_board),
GFP_KERNEL);
if (!tps_board) {
dev_err(&pdev->dev, "Failure to alloc pdata for regulators.\n");
return NULL;
}
regulators = of_find_node_by_name(np, "regulators");
if (!regulators) {
dev_err(&pdev->dev, "regulator node not found\n");
return NULL;
}
count = ARRAY_SIZE(tps6507x_matches);
matches = tps6507x_matches;
ret = of_regulator_match(&pdev->dev, regulators, matches, count);
if (ret < 0) {
dev_err(&pdev->dev, "Error parsing regulator init data: %d\n",
ret);
return NULL;
}
*tps6507x_reg_matches = matches;
reg_data = devm_kzalloc(&pdev->dev, (sizeof(struct regulator_init_data)
* TPS6507X_NUM_REGULATOR), GFP_KERNEL);
if (!reg_data) {
dev_err(&pdev->dev, "Failure to alloc init data for regulators.\n");
return NULL;
}
tps_board->tps6507x_pmic_init_data = reg_data;
for (idx = 0; idx < count; idx++) {
if (!matches[idx].init_data || !matches[idx].of_node)
continue;
memcpy(&reg_data[idx], matches[idx].init_data,
sizeof(struct regulator_init_data));
}
return tps_board;
}
#else
static inline struct tps6507x_board *tps6507x_parse_dt_reg_data(
struct platform_device *pdev,
struct of_regulator_match **tps6507x_reg_matches)
{
*tps6507x_reg_matches = NULL;
return NULL;
}
#endif
static int tps6507x_pmic_probe(struct platform_device *pdev)
{
struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
......@@ -365,8 +441,10 @@ static int tps6507x_pmic_probe(struct platform_device *pdev)
struct regulator_dev *rdev;
struct tps6507x_pmic *tps;
struct tps6507x_board *tps_board;
struct of_regulator_match *tps6507x_reg_matches = NULL;
int i;
int error;
unsigned int prop;
/**
* tps_board points to pmic related constants
......@@ -374,6 +452,9 @@ static int tps6507x_pmic_probe(struct platform_device *pdev)
*/
tps_board = dev_get_platdata(tps6507x_dev->dev);
if (!tps_board && tps6507x_dev->dev->of_node)
tps_board = tps6507x_parse_dt_reg_data(pdev,
&tps6507x_reg_matches);
if (!tps_board)
return -EINVAL;
......@@ -415,6 +496,17 @@ static int tps6507x_pmic_probe(struct platform_device *pdev)
config.init_data = init_data;
config.driver_data = tps;
if (tps6507x_reg_matches) {
error = of_property_read_u32(
tps6507x_reg_matches[i].of_node,
"ti,defdcdc_default", &prop);
if (!error)
tps->info[i]->defdcdc_default = prop;
config.of_node = tps6507x_reg_matches[i].of_node;
}
rdev = regulator_register(&tps->desc[i], &config);
if (IS_ERR(rdev)) {
dev_err(tps6507x_dev->dev,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment