net: phy: dp83867: perform soft reset and retain established link

Current logic is performing hard reset and causing the programmed
registers to be wiped out.

as per datasheet: https://www.ti.com/lit/ds/symlink/dp83867cr.pdf
8.6.26 Control Register (CTRL)

do SW_RESTART to perform a reset not including the registers,
If performed when link is already present,
it will drop the link and trigger re-auto negotiation.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Geet Modi <geet.modi@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/dp83867.c

@@ -826,16 +826,12 @@ static int dp83867_phy_reset(struct phy_device *phydev)
 {
 	int err;
 
-	err = phy_write(phydev, DP83867_CTRL, DP83867_SW_RESET);
+	err = phy_write(phydev, DP83867_CTRL, DP83867_SW_RESTART);
 	if (err < 0)
 		return err;
 
 	usleep_range(10, 20);
 
-	/* After reset FORCE_LINK_GOOD bit is set. Although the
-	 * default value should be unset. Disable FORCE_LINK_GOOD
-	 * for the phy to work properly.
-	 */
 	return phy_modify(phydev, MII_DP83867_PHYCTRL,
 			 DP83867_PHYCR_FORCE_LINK_GOOD, 0);
 }