of: convert unittest overlay devicetree source to sugar syntax

The unittest-data overlays have been pulled into proper overlay
devicetree source files without changing their format.  The
next step is to convert them to use sugar syntax instead of
hand coding overlay fragments structure.

A few of the overlays can not be converted because they test
absolute target paths in the overlay fragment.  dtc does not
generate this type of target:
  overlay_0.dts
  overlay_1.dts
  overlay_12.dts
  overlay_13.dts

Two pre-existing unittest overlay devicetree source files are
also converted:
  overlay_bad_phandle.dts
  overlay_bad_symbol.dts
Signed-off-by: Frank Rowand <frank.rowand@sony.com>

drivers/of/unittest-data/overlay.dts

@@ -2,76 +2,63 @@
 /dts-v1/;
 /plugin/;
 
-/ {
+&electric_1 {
 
-	fragment@0 {
-		target = <&electric_1>;
+	status = "okay";
 
-		__overlay__ {
-			status = "okay";
-
-			hvac_2: hvac-large-1 {
-				compatible = "ot,hvac-large";
-				heat-range = < 40 75 >;
-				cool-range = < 65 80 >;
-			};
-		};
+	hvac_2: hvac-large-1 {
+		compatible = "ot,hvac-large";
+		heat-range = < 40 75 >;
+		cool-range = < 65 80 >;
 	};
+};
 
-	fragment@1 {
-		target = <&rides_1>;
-
-		__overlay__ {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "okay";
-
-			ride@100 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				track@30 {
-					incline-up = < 48 32 16 >;
-				};
+&rides_1 {
 
-				track@40 {
-					incline-up = < 47 31 15 >;
-				};
-			};
+	#address-cells = <1>;
+	#size-cells = <1>;
+	status = "okay";
 
-			ride_200: ride@200 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "ot,ferris-wheel";
-				reg = < 0x00000200 0x100 >;
-				hvac-provider = < &hvac_2 >;
-				hvac-thermostat = < 27 32 > ;
-				hvac-zones = < 12 5 >;
-				hvac-zone-names = "operator", "snack-bar";
-				spin-controller = < &spin_ctrl_1 3 >;
-				spin-rph = < 30 >;
-				gondolas = < 16 >;
-				gondola-capacity = < 6 >;
+	ride@100 {
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-				ride_200_left: track@10 {
-					reg = < 0x00000010 0x10 >;
-				};
+		track@30 {
+			incline-up = < 48 32 16 >;
+		};
 
-				ride_200_right: track@20 {
-					reg = < 0x00000020 0x10 >;
-				};
-			};
+		track@40 {
+			incline-up = < 47 31 15 >;
 		};
 	};
 
-	fragment@2 {
-		target = <&lights_2>;
+	ride_200: ride@200 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "ot,ferris-wheel";
+		reg = < 0x00000200 0x100 >;
+		hvac-provider = < &hvac_2 >;
+		hvac-thermostat = < 27 32 > ;
+		hvac-zones = < 12 5 >;
+		hvac-zone-names = "operator", "snack-bar";
+		spin-controller = < &spin_ctrl_1 3 >;
+		spin-rph = < 30 >;
+		gondolas = < 16 >;
+		gondola-capacity = < 6 >;
+
+		ride_200_left: track@10 {
+			reg = < 0x00000010 0x10 >;
+		};
 
-		__overlay__ {
-			status = "okay";
-			color = "purple", "white", "red", "green";
-			rate = < 3 256 >;
+		ride_200_right: track@20 {
+			reg = < 0x00000020 0x10 >;
 		};
 	};
+};
+
+&lights_2 {
 
+	status = "okay";
+	color = "purple", "white", "red", "green";
+	rate = < 3 256 >;
 };

drivers/of/unittest-data/overlay_10.dts

@@ -2,33 +2,26 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_10 */
-	/* overlays 8, 9, 10, 11 application and removal in bad sequence */
+/* overlay_10 */
+/* overlays 8, 9, 10, 11 application and removal in bad sequence */
 
-	fragment@0 {
-		target-path = "/testcase-data/overlay-node/test-bus";
-		__overlay__ {
+&unittest_test_bus {
+	/* suppress DTC warning */
+	#address-cells = <1>;
+	#size-cells = <0>;
 
-			/* suppress DTC warning */
-			#address-cells = <1>;
-			#size-cells = <0>;
+	test-unittest10 {
+		compatible = "unittest";
+		status = "okay";
+		reg = <10>;
 
-			test-unittest10 {
-				compatible = "unittest";
-				status = "okay";
-				reg = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				test-unittest101 {
-					compatible = "unittest";
-					status = "okay";
-					reg = <1>;
-				};
-
-			};
+		test-unittest101 {
+			compatible = "unittest";
+			status = "okay";
+			reg = <1>;
 		};
 	};
 };

drivers/of/unittest-data/overlay_11.dts

@@ -2,33 +2,27 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_11 */
-	/* overlays 8, 9, 10, 11 application and removal in bad sequence */
+/* overlay_11 */
+/* overlays 8, 9, 10, 11 application and removal in bad sequence */
 
-	fragment@0 {
-		target-path = "/testcase-data/overlay-node/test-bus";
-		__overlay__ {
+&unittest_test_bus {
+	/* suppress DTC warning */
+	#address-cells = <1>;
+	#size-cells = <0>;
 
-			/* suppress DTC warning */
-			#address-cells = <1>;
-			#size-cells = <0>;
+	test-unittest11 {
+		compatible = "unittest";
+		status = "okay";
+		reg = <11>;
 
-			test-unittest11 {
-				compatible = "unittest";
-				status = "okay";
-				reg = <11>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				test-unittest111 {
-					compatible = "unittest";
-					status = "okay";
-					reg = <1>;
-				};
-
-			};
+		test-unittest111 {
+			compatible = "unittest";
+			status = "okay";
+			reg = <1>;
 		};
+
 	};
 };

drivers/of/unittest-data/overlay_15.dts

@@ -2,33 +2,28 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_15 - mux overlay */
+/* overlay_15 - mux overlay */
 
-	fragment@0 {
-		target-path = "/testcase-data/overlay-node/test-bus/i2c-test-bus";
-		__overlay__ {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			test-unittest15 {
-				reg = <11>;
-				compatible = "unittest-i2c-mux";
-				status = "okay";
+&unittest_i2c_test_bus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	test-unittest15 {
+		reg = <11>;
+		compatible = "unittest-i2c-mux";
+		status = "okay";
 
-				#address-cells = <1>;
-				#size-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-				i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
 
-					test-mux-dev {
-						reg = <32>;
-						compatible = "unittest-i2c-dev";
-						status = "okay";
-					};
-				};
+			test-mux-dev {
+				reg = <32>;
+				compatible = "unittest-i2c-dev";
+				status = "okay";
 			};
 		};
 	};

drivers/of/unittest-data/overlay_2.dts

@@ -2,13 +2,8 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_2 -  enable using label */
+/* overlay_2 -  enable using label */
 
-	fragment@0 {
-		target = <&unittest2>;
-		__overlay__ {
-			status = "okay";
-		};
-	};
+&unittest2 {
+	status = "okay";
 };

drivers/of/unittest-data/overlay_3.dts

@@ -2,13 +2,8 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_3 - disable using label */
+/* overlay_3 - disable using label */
 
-	fragment@0 {
-		target = <&unittest3>;
-		__overlay__ {
-			status = "disabled";
-		};
-	};
+&unittest3 {
+	status = "disabled";
 };

drivers/of/unittest-data/overlay_4.dts

@@ -2,22 +2,17 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_4 - test insertion of a full node */
+/* overlay_4 - test insertion of a full node */
 
-	fragment@0 {
-		target = <&unittestbus>;
-		__overlay__ {
+&unittest_test_bus {
 
-			/* suppress DTC warning */
-			#address-cells = <1>;
-			#size-cells = <0>;
+	/* suppress DTC warning */
+	#address-cells = <1>;
+	#size-cells = <0>;
 
-			test-unittest4 {
-				compatible = "unittest";
-				status = "okay";
-				reg = <4>;
-			};
-		};
+	test-unittest4 {
+		compatible = "unittest";
+		status = "okay";
+		reg = <4>;
 	};
 };

drivers/of/unittest-data/overlay_5.dts

@@ -2,13 +2,8 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_5 - test overlay apply revert */
+/* overlay_5 - test overlay apply revert */
 
-	fragment@0 {
-		target-path = "/testcase-data/overlay-node/test-bus/test-unittest5";
-		__overlay__ {
-			status = "okay";
-		};
-	};
+&unittest5 {
+	status = "okay";
 };

drivers/of/unittest-data/overlay_6.dts

@@ -2,14 +2,9 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_6 */
-	/* overlays 6, 7 application and removal in sequence */
+/* overlay_6 */
+/* overlays 6, 7 application and removal in sequence */
 
-	fragment@0 {
-		target-path = "/testcase-data/overlay-node/test-bus/test-unittest6";
-		__overlay__ {
-			status = "okay";
-		};
-	};
+&unittest6 {
+	status = "okay";
 };

drivers/of/unittest-data/overlay_7.dts

@@ -2,14 +2,9 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_7 */
-	/* overlays 6, 7 application and removal in sequence */
+/* overlay_7 */
+/* overlays 6, 7 application and removal in sequence */
 
-	fragment@0 {
-		target-path = "/testcase-data/overlay-node/test-bus/test-unittest7";
-		__overlay__ {
-			status = "okay";
-		};
-	};
+&unittest7 {
+	status = "okay";
 };

drivers/of/unittest-data/overlay_8.dts

@@ -2,14 +2,9 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_8 */
-	/* overlays 8, 9, 10, 11 application and removal in bad sequence */
+/* overlay_8 */
+/* overlays 8, 9, 10, 11 application and removal in bad sequence */
 
-	fragment@0 {
-		target-path = "/testcase-data/overlay-node/test-bus/test-unittest8";
-		__overlay__ {
-			status = "okay";
-		};
-	};
+&unittest8 {
+	status = "okay";
 };

drivers/of/unittest-data/overlay_9.dts

@@ -2,14 +2,9 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	/* overlay_9 */
-	/* overlays 8, 9, 10, 11 application and removal in bad sequence */
+/* overlay_9 */
+/* overlays 8, 9, 10, 11 application and removal in bad sequence */
 
-	fragment@0 {
-		target-path = "/testcase-data/overlay-node/test-bus/test-unittest8";
-		__overlay__ {
-			property-foo = "bar";
-		};
-	};
+&unittest8 {
+	property-foo = "bar";
 };

drivers/of/unittest-data/overlay_bad_phandle.dts

@@ -2,20 +2,13 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-
-	fragment@0 {
-		target = <&electric_1>;
-
-		__overlay__ {
-
-			// This label should cause an error when the overlay
-			// is applied.  There is already a phandle value
-			// in the base tree for motor-1.
-			spin_ctrl_1_conflict: motor-1 {
-				accelerate = < 3 >;
-				decelerate = < 5 >;
-			};
-		};
+&electric_1 {
+
+	// This label should cause an error when the overlay
+	// is applied.  There is already a phandle value
+	// in the base tree for motor-1.
+	spin_ctrl_1_conflict: motor-1 {
+		accelerate = < 3 >;
+		decelerate = < 5 >;
 	};
 };

drivers/of/unittest-data/overlay_bad_symbol.dts

@@ -2,22 +2,15 @@
 /dts-v1/;
 /plugin/;
 
-/ {
+&electric_1 {
 
-	fragment@0 {
-		target = <&electric_1>;
-
-		__overlay__ {
-
-			// This label should cause an error when the overlay
-			// is applied.  There is already a symbol hvac_1
-			// in the base tree
-			hvac_1: hvac-medium-2 {
-				compatible = "ot,hvac-medium";
-				heat-range = < 50 75 >;
-				cool-range = < 60 80 >;
-			};
-
-		};
+	// This label should cause an error when the overlay
+	// is applied.  There is already a symbol hvac_1
+	// in the base tree
+	hvac_1: hvac-medium-2 {
+		compatible = "ot,hvac-medium";
+		heat-range = < 50 75 >;
+		cool-range = < 60 80 >;
 	};
+
 };

drivers/of/unittest-data/tests-overlay.dtsi

@@ -5,7 +5,7 @@ testcase-data {
 		overlay-node {
 
 			/* test bus */
-			unittestbus: test-bus {
+			unittest_test_bus: test-bus {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -70,7 +70,7 @@ unittest8: test-unittest8 {
 					reg = <8>;
 				};
 
-				i2c-test-bus {
+				unittest_i2c_test_bus: i2c-test-bus {
 					compatible = "unittest-i2c-bus";
 					status = "okay";
 					reg = <50>;