drm/i915: Add readout and state check for pch_pfit.force_thru

Convert the HSW pch_pfit.force_thru to a proper state variable
with readout and accompanying pipe conf check. Makes the logic
a bit more straightforward, and hopefully prevents some
breakage in the future.

'force_thru' is probably not the best name for this, but I
didn't manage to come up with anything better either, so I
left it alone.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190425162906.5242-2-ville.syrjala@linux.intel.comReviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drivers/gpu/drm/i915/intel_ddi.c

@@ -1779,9 +1779,7 @@ void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state)
 			 * eDP when not using the panel fitter, and when not
 			 * using motion blur mitigation (which we don't
 			 * support). */
-			if (IS_HASWELL(dev_priv) &&
-			    (crtc_state->pch_pfit.enabled ||
-			     crtc_state->pch_pfit.force_thru))
+			if (crtc_state->pch_pfit.force_thru)
 				temp |= TRANS_DDI_EDP_INPUT_A_ONOFF;
 			else
 				temp |= TRANS_DDI_EDP_INPUT_A_ON;
@@ -3860,6 +3858,7 @@ static int intel_ddi_compute_config(struct intel_encoder *encoder,
 				    struct intel_crtc_state *pipe_config,
 				    struct drm_connector_state *conn_state)
 {
+	struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	enum port port = encoder->port;
 	int ret;
@@ -3874,6 +3873,12 @@ static int intel_ddi_compute_config(struct intel_encoder *encoder,
 	if (ret)
 		return ret;
 
+	if (IS_HASWELL(dev_priv) && crtc->pipe == PIPE_A &&
+	    pipe_config->cpu_transcoder == TRANSCODER_EDP)
+		pipe_config->pch_pfit.force_thru =
+			pipe_config->pch_pfit.enabled ||
+			pipe_config->crc_enabled;
+
 	if (IS_GEN9_LP(dev_priv))
 		pipe_config->lane_lat_optim_mask =
 			bxt_ddi_phy_calc_lane_lat_optim_mask(pipe_config->lane_count);
@@ -3881,7 +3886,6 @@ static int intel_ddi_compute_config(struct intel_encoder *encoder,
 	intel_ddi_compute_min_voltage_level(dev_priv, pipe_config);
 
 	return 0;
-
 }
 
 static void intel_ddi_encoder_suspend(struct intel_encoder *encoder)

drivers/gpu/drm/i915/intel_display.c

@@ -9652,6 +9652,7 @@ static bool hsw_get_transcoder_state(struct intel_crtc *crtc,
 	for_each_set_bit(panel_transcoder,
 			 &panel_transcoder_mask,
 			 ARRAY_SIZE(INTEL_INFO(dev_priv)->trans_offsets)) {
+		bool force_thru = false;
 		enum pipe trans_pipe;
 
 		tmp = I915_READ(TRANS_DDI_FUNC_CTL(panel_transcoder));
@@ -9673,6 +9674,8 @@ static bool hsw_get_transcoder_state(struct intel_crtc *crtc,
 			     transcoder_name(panel_transcoder));
 			/* fall through */
 		case TRANS_DDI_EDP_INPUT_A_ONOFF:
+			force_thru = true;
+			/* fall through */
 		case TRANS_DDI_EDP_INPUT_A_ON:
 			trans_pipe = PIPE_A;
 			break;
@@ -9684,8 +9687,10 @@ static bool hsw_get_transcoder_state(struct intel_crtc *crtc,
 			break;
 		}
 
-		if (trans_pipe == crtc->pipe)
+		if (trans_pipe == crtc->pipe) {
 			pipe_config->cpu_transcoder = panel_transcoder;
+			pipe_config->pch_pfit.force_thru = force_thru;
+		}
 	}
 
 	/*
@@ -11520,10 +11525,11 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
 			      pipe_config->gmch_pfit.pgm_ratios,
 			      pipe_config->gmch_pfit.lvds_border_bits);
 	else
-		DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x, %s\n",
+		DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x, %s, force thru: %s\n",
 			      pipe_config->pch_pfit.pos,
 			      pipe_config->pch_pfit.size,
-		              enableddisabled(pipe_config->pch_pfit.enabled));
+			      enableddisabled(pipe_config->pch_pfit.enabled),
+			      yesno(pipe_config->pch_pfit.force_thru));
 
 	DRM_DEBUG_KMS("ips: %i, double wide: %i\n",
 		      pipe_config->ips_enabled, pipe_config->double_wide);
@@ -11645,7 +11651,6 @@ clear_intel_crtc_state(struct intel_crtc_state *crtc_state)
 	saved_state->scaler_state = crtc_state->scaler_state;
 	saved_state->shared_dpll = crtc_state->shared_dpll;
 	saved_state->dpll_hw_state = crtc_state->dpll_hw_state;
-	saved_state->pch_pfit.force_thru = crtc_state->pch_pfit.force_thru;
 	saved_state->crc_enabled = crtc_state->crc_enabled;
 	if (IS_G4X(dev_priv) ||
 	    IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
@@ -11937,7 +11942,6 @@ intel_pipe_config_compare(struct drm_i915_private *dev_priv,
 			  struct intel_crtc_state *pipe_config,
 			  bool adjust)
 {
-	struct intel_crtc *crtc = to_intel_crtc(current_config->base.crtc);
 	bool ret = true;
 	bool fixup_inherited = adjust &&
 		(current_config->base.mode.private_flags & I915_MODE_FLAG_INHERITED) &&
@@ -12163,9 +12167,7 @@ intel_pipe_config_compare(struct drm_i915_private *dev_priv,
 	 * Changing the EDP transcoder input mux
 	 * (A_ONOFF vs. A_ON) requires a full modeset.
 	 */
-	if (IS_HASWELL(dev_priv) && crtc->pipe == PIPE_A &&
-	    current_config->cpu_transcoder == TRANSCODER_EDP)
-		PIPE_CONF_CHECK_BOOL(pch_pfit.enabled);
+	PIPE_CONF_CHECK_BOOL(pch_pfit.force_thru);
 
 	if (!adjust) {
 		PIPE_CONF_CHECK_I(pipe_src_w);

drivers/gpu/drm/i915/intel_pipe_crc.c

@@ -314,17 +314,8 @@ intel_crtc_crc_setup_workarounds(struct intel_crtc *crtc, bool enable)
 
 	if (IS_HASWELL(dev_priv) &&
 	    pipe_config->base.active && crtc->pipe == PIPE_A &&
-	    pipe_config->cpu_transcoder == TRANSCODER_EDP) {
-		bool old_need_power_well = pipe_config->pch_pfit.enabled ||
-			pipe_config->pch_pfit.force_thru;
-		bool new_need_power_well = pipe_config->pch_pfit.enabled ||
-			enable;
-
-		pipe_config->pch_pfit.force_thru = enable;
-
-		if (old_need_power_well != new_need_power_well)
-			pipe_config->base.connectors_changed = true;
-	}
+	    pipe_config->cpu_transcoder == TRANSCODER_EDP)
+		pipe_config->base.mode_changed = true;
 
 	ret = drm_atomic_commit(state);