Commit dc0fe7d4 authored by Andrew Lunn's avatar Andrew Lunn Committed by David S. Miller

net: dsa: Set the master device's MTU to account for DSA overheads

DSA tagging of frames sent over the master interface to the switch
increases the size of the frame. Such frames can then be bigger than
the normal MTU of the master interface, and it may drop them. Use the
overhead information from the tagger to set the MTU of the master
device to include this overhead.
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent a5dd3087
......@@ -158,8 +158,24 @@ static void dsa_master_ethtool_teardown(struct net_device *dev)
cpu_dp->orig_ethtool_ops = NULL;
}
void dsa_master_set_mtu(struct net_device *dev, struct dsa_port *cpu_dp)
{
unsigned int mtu = ETH_DATA_LEN + cpu_dp->tag_ops->overhead;
int err;
rtnl_lock();
if (mtu <= dev->max_mtu) {
err = dev_set_mtu(dev, mtu);
if (err)
netdev_dbg(dev, "Unable to set MTU to include for DSA overheads\n");
}
rtnl_unlock();
}
int dsa_master_setup(struct net_device *dev, struct dsa_port *cpu_dp)
{
dsa_master_set_mtu(dev, cpu_dp);
/* If we use a tagging format that doesn't have an ethertype
* field, make sure that all packets from this point on get
* sent to the tag format's receive function.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment