Commit dc273f67 authored by Todor Tomov's avatar Todor Tomov Committed by Mauro Carvalho Chehab

media: dt-bindings: media: qcom,camss: Fix whitespaces

Use tabs.

CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: devicetree@vger.kernel.org
Signed-off-by: default avatarTodor Tomov <todor.tomov@linaro.org>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarHans Verkuil <hansverk@cisco.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
parent 06d690f0
......@@ -53,25 +53,25 @@ Qualcomm Camera Subsystem
Usage: required
Value type: <stringlist>
Definition: Should contain the following entries:
- "top_ahb"
- "ispif_ahb"
- "csiphy0_timer"
- "csiphy1_timer"
- "csi0_ahb"
- "csi0"
- "csi0_phy"
- "csi0_pix"
- "csi0_rdi"
- "csi1_ahb"
- "csi1"
- "csi1_phy"
- "csi1_pix"
- "csi1_rdi"
- "ahb"
- "vfe0"
- "csi_vfe0"
- "vfe_ahb"
- "vfe_axi"
- "top_ahb"
- "ispif_ahb"
- "csiphy0_timer"
- "csiphy1_timer"
- "csi0_ahb"
- "csi0"
- "csi0_phy"
- "csi0_pix"
- "csi0_rdi"
- "csi1_ahb"
- "csi1"
- "csi1_phy"
- "csi1_pix"
- "csi1_rdi"
- "ahb"
- "vfe0"
- "csi_vfe0"
- "vfe_ahb"
- "vfe_axi"
- vdda-supply:
Usage: required
Value type: <phandle>
......@@ -95,17 +95,17 @@ Qualcomm Camera Subsystem
- clock-lanes:
Usage: required
Value type: <u32>
Definition: The physical clock lane index. The value
must always be <1> as the physical clock
lane is lane 1.
Definition: The physical clock lane index. The value
must always be <1> as the physical clock
lane is lane 1.
- data-lanes:
Usage: required
Value type: <prop-encoded-array>
Definition: An array of physical data lanes indexes.
Position of an entry determines the logical
lane number, while the value of an entry
indicates physical lane index. Lane swapping
is supported.
Definition: An array of physical data lanes indexes.
Position of an entry determines the logical
lane number, while the value of an entry
indicates physical lane index. Lane swapping
is supported.
* An Example
......@@ -161,25 +161,25 @@ Qualcomm Camera Subsystem
<&gcc GCC_CAMSS_CSI_VFE0_CLK>,
<&gcc GCC_CAMSS_VFE_AHB_CLK>,
<&gcc GCC_CAMSS_VFE_AXI_CLK>;
clock-names = "top_ahb",
"ispif_ahb",
"csiphy0_timer",
"csiphy1_timer",
"csi0_ahb",
"csi0",
"csi0_phy",
"csi0_pix",
"csi0_rdi",
"csi1_ahb",
"csi1",
"csi1_phy",
"csi1_pix",
"csi1_rdi",
"ahb",
"vfe0",
"csi_vfe0",
"vfe_ahb",
"vfe_axi";
clock-names = "top_ahb",
"ispif_ahb",
"csiphy0_timer",
"csiphy1_timer",
"csi0_ahb",
"csi0",
"csi0_phy",
"csi0_pix",
"csi0_rdi",
"csi1_ahb",
"csi1",
"csi1_phy",
"csi1_pix",
"csi1_rdi",
"ahb",
"vfe0",
"csi_vfe0",
"vfe_ahb",
"vfe_axi";
vdda-supply = <&pm8916_l2>;
iommus = <&apps_iommu 3>;
ports {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment