Import 2.1.52

CREDITS

@@ -529,6 +529,7 @@ S: Canada
 
 N: Richard Gnther
 E: richard.guenther@student.uni-tuebingen.de
+P: 2048/2E829319 2F 83 FC 93 E9 E4 19 E2  93 7A 32 42 45 37 23 57
 D: binfmt_misc
 S: Fichtenweg 3/511
 S: 72076 Tbingen
@@ -1467,10 +1468,12 @@ S: MacGregor A.C.T
 S: 2615 Australia
 
 N: Winfried Trmper
-E: truemper@MI.Uni-Koeln.DE
-D: German HOWTO, Enhanced German HOWTO, Crash-Kurs Linux (German)
-D: 1- or 5-days tutorials on Linux twice a year (free of charge)
-D: Linux-Workshop Kln (aka LUUG cologne, germany)
+E: winni@xpilot.org
+W: http://www.shop.de/~winni/
+D: German HOWTO, Crash-Kurs Linux (German, 100 comprehensive pages)
+D: CD-Writing HOWTO, various mini-HOWTOs
+D: one-week tutorials on Linux twice a year (free of charge)
+D: Linux-Workshop Kln (aka LUG Cologne, Germany), Installfests
 S: Tacitusstr. 6
 S: D-50968 Kln
 

Documentation/Changes

@@ -54,6 +54,7 @@ running, the suggested command should tell you.
 - Autofs                 0.3.7                   ; automount --version
 - NFS                    0.4.21                  ; showmount --version
 - Bash                   1.14.7                  ; bash -version
+- Smbfs                  2.1.0
 
 Upgrade notes
 *************
@@ -160,6 +161,10 @@ to a 2.6 release.  Also, amd is being phased out in favor of the much
 better autofs.  You'll also have to get the appropriate utils to use
 autofs as well as the new NFS utils.
 
+The smbfs code is also being revised. This results in an incompatible
+mount interface. See the README of smbfs-2.1.0 or later for a
+description of the new mount command.
+
 RPM
 ===
 

Documentation/Configure.help

@@ -1982,12 +1982,10 @@ NCR53C8XX SCSI support
 CONFIG_SCSI_NCR53C8XX
   This is the BSD ncr driver adapted to linux for the NCR53C8XX family
   of PCI-SCSI controllers. This driver supports parity checking,
-  tagged command queuing, fast scsi II transfer up to 10 MB/s with
-  narrow scsi devices and 20 MB/s with wide scsi devices.
-  Support of Ultra SCSI data transfers with NCR53C860 and NCR53C875 
-  controllers has been recently added to the driver.
+  tagged command queuing, Fast-20 data transfer up to 20 MB/s with
+  narrow scsi devices and 40 MB/s with wide scsi devices.
   Please read drivers/scsi/README.ncr53c8xx for more information.
-  Linux/i386 and Linux/Alpha are supported by this driver.
+  Linux/i386, Linux/Alpha and Linux/PPC are supported by this driver.
 
 synchronous data transfers frequency
 CONFIG_SCSI_NCR53C8XX_SYNC
@@ -2015,10 +2013,11 @@ use normal IO
 CONFIG_SCSI_NCR53C8XX_IOMAPPED
   This option allows you to force the driver to use normal IO.
   Memory mapped IO has less latency than normal IO and works for most 
-  Intel-based hardware.
-  Under Linux/Alpha only normal IO is currently supported by the driver 
-  and so, this option has no effect.
-  The normal answer therefore is N. Try Y only if you have problems.
+  Intel-based hardware.  Under Linux/Alpha and Linux/PPC only normal 
+  IO is currently supported by the driver and so, this option has no
+  effect. On Linux/PPC MMIO and normal IO are done the same (all IO
+  is memory mapped) so you loose nothing by using normal IO. The normal
+  answer therefore is N. Try Y only if you have problems.
 
 not allow targets to disconnect
 CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT

Documentation/binfmt_misc.txt

@@ -9,7 +9,7 @@ To achieve this you must tell binfmt_misc which interpreter has to be invoked
 with which binary. Binfmt_misc recognises the binary-type by matching some bytes
 at the beginning of the file with a magic byte sequence (masking out specified
 bits) you have supplied. Binfmt_misc can also recognise a filename extension
-(aka .com) and optionally strip it off.
+aka '.com' or '.exe'.
 
 To actually register a new binary type, you have to set up a string looking like
 :name:type:offset:magic:mask:interpreter: (where you can choose the ':' upon
@@ -18,44 +18,46 @@ Here is what the fields mean:
  - 'name' is an identifier string. A new /proc file will be created with this
    name below /proc/sys/fs/binfmt_misc
  - 'type' is the type of recognition. Give 'M' for magic and 'E' for extension.
-   Give the corresponding lowercase letter to let binfmt_misc strip off the
-   filename extension.
  - 'offset' is the offset of the magic/mask in the file, counted in bytes. This
    defaults to 0 if you omit it (i.e. you write ':name:type::magic...')
  - 'magic' is the byte sequence binfmt_misc is matching for. The magic string
    may contain hex-encoded characters like \x0a or \xA4. In a shell environment
    you will have to write \\x0a to prevent the shell from eating your \.
    If you chose filename extension matching, this is the extension to be
-   recognised (the \x0a specials are not allowed). Extension matching is case
-   sensitive!
+   recognised (without the '.', the \x0a specials are not allowed). Extension
+   matching is case sensitive!
  - 'mask' is an (optional, defaults to all 0xff) mask. You can mask out some
    bits from matching by supplying a string like magic and as long as magic.
    The mask is anded with the byte sequence of the file.
  - 'interpreter' is the program that should be invoked with the binary as first
    argument (specify the full path)
+
 There are some restrictions:
  - the whole register string may not exceed 255 characters
  - the magic must resist in the first 128 bytes of the file, i.e.
    offset+size(magic) has to be less than 128
  - the interpreter string may not exceed 127 characters
+
 You may want to add the binary formats in one of your /etc/rc scripts during
 boot-up. Read the manual of your init program to figure out how to do this
 right.
 
+Think about the order of adding entries! Later added entries are matched first!
+
 
 A few examples (assumed you are in /proc/sys/fs/binfmt_misc):
 
 - enable support for em86 (like binfmt_em86, for Alpha AXP only):
-  echo ":i386:M::\x7fELF\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfb\xff\xff:/bin/em86:" > register
-  echo ":i486:M::\x7fELF\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x06:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfb\xff\xff:/bin/em86:" > register
+  echo ':i386:M::\x7fELF\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfb\xff\xff:/bin/em86:' > register
+  echo ':i486:M::\x7fELF\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x06:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfb\xff\xff:/bin/em86:' > register
 
 - enable support for packed DOS applications (pre-configured dosemu hdimages):
-  echo ":DEXE:M::\x0eDEX::/usr/bin/dosexec:" > register
+  echo ':DEXE:M::\x0eDEX::/usr/bin/dosexec:' > register
 
 - enable support for DOS/Windows executables (using mzloader and dosemu/wine):
-  echo ":DOSWin:M::MZ::/usr/sbin/mzloader:" > register
-  echo ":DOScom:E::com::/usr/sbin/mzloader:" > register
-  echo ":DOSexe:E::exe::/usr/sbin/mzloader:" > register
+  echo ':DOSWin:M::MZ::/usr/sbin/mzloader:' > register
+  echo ':DOScom:E::com::/usr/sbin/mzloader:' > register
+  echo ':DOSexe:E::exe::/usr/sbin/mzloader:' > register
 
 
 You can enable/disable binfmt_misc or one binary type by echoing 0 (to disable)
@@ -71,11 +73,11 @@ Emulating binfmt_java:
 
 To emulate binfmt_java the following register-strings could be used: 
 for compiled Java programs use
-  ":Java:M::\xca\xfe\xba\xbe::/usr/local/java/bin/javawrapper:"
+  ':Java:M::\xca\xfe\xba\xbe::/usr/local/java/bin/javawrapper:'
 for simple applet support use
-  ":Applet:E::html::/usr/local/java/bin/appletviewer:"
+  ':Applet:E::html::/usr/local/java/bin/appletviewer:'
 for more selective applet support (like binfmt_java) use
-  ":Applet:M::\<\!--applet::/usr/local/java/bin/appletviewer:"
+  ':Applet:M::<!--applet::/usr/local/java/bin/appletviewer:'
 
 Note, that for the more selective applet support you have to modify
 existing html-files to contain <!--applet--> in the first line to
@@ -94,7 +96,7 @@ CLASS=$1
 if [ -L "$1" ] ; then
 	CLASS=`ls --color=no -l $1 | tr -s '\t ' '  ' | cut -d ' ' -f 11` 
 fi
-CLASSN=`basename $CLASS | sed s/\.class$//`
+CLASSN=`basename $CLASS .class`
 CLASSP=`dirname $CLASS`
 
 FOO=$PATH

Documentation/filesystems/smbfs.txt

@@ -8,6 +8,6 @@ NetBIOS over TCP/IP. There you also find explanation for concepts like
 netbios name or share.
 
 To use smbfs, you need a special mount program, which can be found in
-the ksmbfs package, found on
+the smbfs package, found on
 
-	sunsite.unc.edu:/pub/Linux/system/filesystems/smbfs
+	ftp://ftp.gwdg.de/pub/linux/misc/smbfs/

Documentation/ioctl-number.txt

 Ioctl Numbers
-7 Aug 1997
+1 Sep 1997
 Michael Chastain
 <mec@shout.net>
 
@@ -106,6 +106,8 @@ Code	Seq#	Include File		Comments
 'u'	all	linux/smb_fs.h
 'v'	all	linux/ext2_fs.h
 'w'	all	CERN SCI driver		in development
+'z'	00-3F	CAN bus card		in development:
+					<mailto:hdstich@connectu.ulm.circular.de>
 0x89	00-0F	asm-i386/sockios.h
 0x89	10-DF	linux/sockios.h
 0x89	E0-EF	linux/sockios.h		SIOCPROTOPRIVATE range

MAINTAINERS

@@ -449,7 +449,7 @@ PARALLEL PORT SHARING SUPPORT
 P:	Phil Blundell
 M:	Philip.Blundell@pobox.com
 P:	Tim Waugh
-M:	tmw20@cyberelk.demon.co.uk
+M:	tim@cyberelk.demon.co.uk
 P:	David Campbell
 M:	campbell@tirian.che.curtin.edu.au
 L:	linux-parport@torque.net

Makefile

 VERSION = 2
 PATCHLEVEL = 1
-SUBLEVEL = 51
+SUBLEVEL = 52
 
 ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/)
 

arch/alpha/config.in

@@ -94,9 +94,9 @@ bool 'System V IPC' CONFIG_SYSVIPC
 bool 'Sysctl support' CONFIG_SYSCTL
 tristate 'Kernel support for a.out (ECOFF) binaries' CONFIG_BINFMT_AOUT
 tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
+tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-  tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
-  tristate 'Kernel support for JAVA binaries' CONFIG_BINFMT_JAVA
+  tristate 'Kernel support for JAVA binaries (obsolete)' CONFIG_BINFMT_JAVA
 fi
 tristate 'Kernel support for Linux/Intel ELF binaries' CONFIG_BINFMT_EM86
 tristate 'Parallel port support' CONFIG_PARPORT

arch/alpha/defconfig

@@ -43,7 +43,7 @@ CONFIG_SYSCTL=y
 CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_EM86=y
-# CONFIG_PNP_PARPORT is not set
+# CONFIG_PARPORT is not set
 
 #
 # Plug and Play support
@@ -67,7 +67,6 @@ CONFIG_BLK_DEV_FD=y
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_MD is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_BLK_DEV_XD is not set
 # CONFIG_BLK_DEV_EZ is not set
 # CONFIG_BLK_DEV_HD is not set
@@ -142,6 +141,7 @@ CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_NCR53C406A is not set
 # CONFIG_SCSI_NCR53C7xx is not set
 # CONFIG_SCSI_NCR53C8XX is not set
+# CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_PAS16 is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
 CONFIG_SCSI_QLOGIC_ISP=y
@@ -150,6 +150,8 @@ CONFIG_SCSI_QLOGIC_ISP=y
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_U14_34F is not set
 # CONFIG_SCSI_ULTRASTOR is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 
 #
 # Network device support
@@ -174,6 +176,7 @@ CONFIG_DE4X5=y
 # CONFIG_NET_POCKET is not set
 # CONFIG_FDDI is not set
 # CONFIG_DLCI is not set
+# CONFIG_PLIP is not set
 # CONFIG_PPP is not set
 # CONFIG_NET_RADIO is not set
 # CONFIG_SLIP is not set
@@ -215,6 +218,7 @@ CONFIG_ISO9660_FS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_MAC_PARTITION is not set
 
 #
 # Character devices
@@ -230,12 +234,15 @@ CONFIG_MOUSE=y
 # CONFIG_MS_BUSMOUSE is not set
 CONFIG_PSMOUSE=y
 # CONFIG_82C710_MOUSE is not set
+# CONFIG_PC110_PAD is not set
 # CONFIG_UMISC is not set
 # CONFIG_QIC02_TAPE is not set
 # CONFIG_FTAPE is not set
 # CONFIG_APM is not set
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
+# CONFIG_NVRAM is not set
+# CONFIG_JOYSTICK is not set
 
 #
 # Sound

arch/alpha/kernel/entry.S

@@ -437,8 +437,8 @@ entUnaUser:
 	stq $13,32($30)
 	stq $14,40($30)
 	stq $15,48($30)
-	bis $31,$30,$19
 	lda $8,0x3fff
+	addq $30,56,$19
 	bic $30,$8,$8
 	jsr $26,do_entUnaUser
 	ldq $9,0($30)

arch/alpha/kernel/traps.c

@@ -491,8 +491,22 @@ static inline unsigned long s_reg_to_mem (unsigned long s_reg)
 			| 1L << 0x2c | 1L << 0x2d   /* stl stq */	\
 			| 1L << 0xd )		    /* stw */
 
+#define R(x)	((size_t) &((struct pt_regs *)0)->x)
+
+static int unauser_reg_offsets[32] = {
+	R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), R(r8),
+	/* r9 ... r15 are stored in front of regs.  */
+	-56, -48, -40, -32, -24, -16, -8,
+	R(r16), R(r17), R(r18),
+	R(r19), R(r20), R(r21), R(r22), R(r23), R(r24), R(r25), R(r26),
+	R(r27), R(r28), R(gp),
+	0, 0
+};
+
+#undef R
+
 asmlinkage void do_entUnaUser(void * va, unsigned long opcode,
-			      unsigned long reg, unsigned long * frame)
+			      unsigned long reg, struct pt_regs *regs)
 {
 	extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
 	extern unsigned long alpha_read_fp_reg (unsigned long reg);
@@ -501,12 +515,10 @@ asmlinkage void do_entUnaUser(void * va, unsigned long opcode,
 	static long last_time = 0;
 
 	unsigned long tmp1, tmp2, tmp3, tmp4;
-	unsigned long *reg_addr, *pc_addr, fake_reg;
+	unsigned long fake_reg, *reg_addr = &fake_reg;
 	unsigned long uac_bits;
 	long error;
 
-	pc_addr = frame + 7 + 20 + 1;			/* pc in PAL frame */
-
 	/* Check the UAC bits to decide what the user wants us to do
 	   with the unaliged access.  */
 
@@ -519,7 +531,7 @@ asmlinkage void do_entUnaUser(void * va, unsigned long opcode,
 			lock_kernel();
 			printk("%s(%d): unaligned trap at %016lx: %p %lx %ld\n",
 			       current->comm, current->pid,
-			       *pc_addr - 4, va, opcode, reg);
+			       regs->pc - 4, va, opcode, reg);
 			unlock_kernel();
 		}
 		last_time = jiffies;
@@ -540,51 +552,19 @@ asmlinkage void do_entUnaUser(void * va, unsigned long opcode,
 
 	++unaligned[1].count;
 	unaligned[1].va = (unsigned long)va;
-	unaligned[1].pc = *pc_addr - 4;
+	unaligned[1].pc = regs->pc - 4;
 
-	reg_addr = frame;
 	if ((1L << opcode) & OP_INT_MASK) {
 		/* it's an integer load/store */
-		switch (reg) {
-		      case 0: case 1: case 2: case 3: case 4:
-		      case 5: case 6: case 7: case 8:
-			/* v0-t7 in SAVE_ALL frame */
-			reg_addr += 7 + reg;
-			break;
-
-		      case 9: case 10: case 11: case 12:
-		      case 13: case 14: case 15:
-			/* s0-s6 in entUna frame */
-			reg_addr += (reg - 9);
-			break;
-
-		      case 16: case 17: case 18:
-			/* a0-a2 in PAL frame */
-			reg_addr += 7 + 20 + 3 + (reg - 16);
-			break;
-
-		      case 19: case 20: case 21: case 22: case 23:
-		      case 24: case 25: case 26: case 27: case 28:
-			/* a3-at in SAVE_ALL frame */
-			reg_addr += 7 + 9 + (reg - 19);
-			break;
-
-		      case 29:
-			/* gp in PAL frame */
-			reg_addr += 7 + 20 + 2;
-			break;
-
-		      case 30:
+		if (reg < 30) {
+			reg_addr = (unsigned long *)
+			  ((char *)regs + unauser_reg_offsets[reg]);
+		} else if (reg == 30) {
 			/* usp in PAL regs */
 			fake_reg = rdusp();
-			reg_addr = &fake_reg;
-			break;
-
-		      case 31:
+		} else {
 			/* zero "register" */
 			fake_reg = 0;
-			reg_addr = &fake_reg;
-			break;
 		}
 	}
 
@@ -728,7 +708,6 @@ asmlinkage void do_entUnaUser(void * va, unsigned long opcode,
 
 	case 0x26: /* sts */
 		fake_reg = s_reg_to_mem(alpha_read_fp_reg(reg));
-		reg_addr = &fake_reg;
 		/* FALLTHRU */
 
 	case 0x2c: /* stl */
@@ -763,7 +742,6 @@ asmlinkage void do_entUnaUser(void * va, unsigned long opcode,
 
 	case 0x27: /* stt */
 		fake_reg = alpha_read_fp_reg(reg);
-		reg_addr = &fake_reg;
 		/* FALLTHRU */
 
 	case 0x2d: /* stq */
@@ -807,14 +785,14 @@ asmlinkage void do_entUnaUser(void * va, unsigned long opcode,
 	return;
 
 give_sigsegv:
-	*pc_addr -= 4;  /* make pc point to faulting insn */
+	regs->pc -= 4;  /* make pc point to faulting insn */
 	lock_kernel();
 	force_sig(SIGSEGV, current);
 	unlock_kernel();
 	return;
 
 give_sigbus:
-	*pc_addr -= 4;
+	regs->pc -= 4;
 	lock_kernel();
 	force_sig(SIGBUS, current);
 	unlock_kernel();

arch/i386/config.in

@@ -36,7 +36,7 @@ tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
 tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
 tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-  tristate 'Kernel support for JAVA binaries' CONFIG_BINFMT_JAVA
+  tristate 'Kernel support for JAVA binaries (obsolete)' CONFIG_BINFMT_JAVA
 fi
 
 choice 'Processor type' \

arch/m68k/config.in

@@ -52,9 +52,7 @@ bool 'System V IPC' CONFIG_SYSVIPC
 bool 'Sysctl support' CONFIG_SYSCTL
 tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
 tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
-if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-  tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
-fi
+tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
 
 if [ "$CONFIG_AMIGA" = "y" ]; then
   bool 'Amiga AutoConfig Identification' CONFIG_ZORRO

arch/mips/config.in

@@ -77,7 +77,8 @@ fi
 define_bool CONFIG_BINFMT_ELF y
 define_bool CONFIG_BINFMT_AOUT n
 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-  tristate 'Kernel support for JAVA binaries' CONFIG_BINFMT_JAVA
+  tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
+  tristate 'Kernel support for JAVA binaries (obsolete)' CONFIG_BINFMT_JAVA
 fi
 bool 'Networking support' CONFIG_NET
 bool 'System V IPC' CONFIG_SYSVIPC

arch/ppc/config.in

@@ -46,7 +46,7 @@ bool 'System V IPC' CONFIG_SYSVIPC
 define_bool CONFIG_BINFMT_ELF y
 define_bool CONFIG_KERNEL_ELF y
 tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
-tristate 'Kernel support for JAVA binaries' CONFIG_BINFMT_JAVA
+tristate 'Kernel support for JAVA binaries (obsolete)' CONFIG_BINFMT_JAVA
 
 if [ "$CONFIG_PMAC" = "y" ]; then
   define_bool CONFIG_PMAC_CONSOLE y

arch/sparc/config.in

@@ -53,9 +53,9 @@ bool 'System V IPC' CONFIG_SYSVIPC
 bool 'Sysctl support' CONFIG_SYSCTL
 tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
 tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
+tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-  tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
-  tristate 'Kernel support for JAVA binaries' CONFIG_BINFMT_JAVA
+  tristate 'Kernel support for JAVA binaries (obsolete)' CONFIG_BINFMT_JAVA
 fi
 endmenu
 

arch/sparc64/config.in

@@ -57,11 +57,9 @@ if [ "$CONFIG_SPARC32_COMPAT" != "n" ]; then
   tristate 'Kernel support for 32-bit ELF binaries' CONFIG_BINFMT_ELF32
   bool 'Kernel support for 32-bit (ie. SunOS) a.out binaries' CONFIG_BINFMT_AOUT32
 fi
-if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-  tristate 'Kernel support for JAVA binaries' CONFIG_BINFMT_JAVA
-fi
 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
+  tristate 'Kernel support for JAVA binaries (obsolete)' CONFIG_BINFMT_JAVA
 fi
 endmenu
 

drivers/char/lp.c

@@ -36,11 +36,11 @@
 /* if you have more than 3 printers, remember to increase LP_NO */
 struct lp_struct lp_table[] =
 {
- {NULL, 0, LP_INIT_CHAR, LP_INIT_TIME, LP_INIT_WAIT, NULL, NULL, 0, 0, 0,
+ {NULL, 0, LP_INIT_CHAR, LP_INIT_TIME, LP_INIT_WAIT, NULL, NULL, 0, 0, 0, 0,
   {0}},
- {NULL, 0, LP_INIT_CHAR, LP_INIT_TIME, LP_INIT_WAIT, NULL, NULL, 0, 0, 0,
+ {NULL, 0, LP_INIT_CHAR, LP_INIT_TIME, LP_INIT_WAIT, NULL, NULL, 0, 0, 0, 0,
   {0}},
- {NULL, 0, LP_INIT_CHAR, LP_INIT_TIME, LP_INIT_WAIT, NULL, NULL, 0, 0, 0,
+ {NULL, 0, LP_INIT_CHAR, LP_INIT_TIME, LP_INIT_WAIT, NULL, NULL, 0, 0, 0, 0,
   {0}}
 };
 #define LP_NO 3
@@ -60,6 +60,41 @@ static char *dev_name = "lp";
 #undef LP_DEBUG
 #undef LP_READ_DEBUG
 
+static inline void lp_parport_release (int minor)
+{
+	parport_release (lp_table[minor].dev);
+	lp_table[minor].should_relinquish = 0;
+}
+
+static inline void lp_parport_claim (int minor)
+{
+	if (parport_claim (lp_table[minor].dev))
+		sleep_on (&lp_table[minor].lp_wait_q);
+}
+
+static inline void lp_schedule (int minor)
+{
+	if (lp_table[minor].should_relinquish) {
+		lp_parport_release (minor);
+		schedule ();
+		lp_parport_claim (minor);
+	}
+	else
+		schedule ();
+}
+
+
+static int lp_preempt (void *handle)
+{
+	struct lp_struct *lps = (struct lp_struct *)handle;
+
+	/* Just remember that someone wants the port */
+	lps->should_relinquish = 1;
+
+	/* Don't actually release the port now */
+	return 1;
+}
+
 static int lp_reset(int minor)
 {
 	w_ctr(minor, LP_PSELECP);
@@ -70,7 +105,8 @@ static int lp_reset(int minor)
 
 static inline int lp_char_polled(char lpchar, int minor)
 {
-	int status, wait = 0;
+	int status;
+	unsigned int wait = 0;
 	unsigned long count = 0;
 	struct lp_stats *stats;
 
@@ -78,7 +114,7 @@ static inline int lp_char_polled(char lpchar, int minor)
 		status = r_str(minor);
 		count++;
 		if (need_resched)
-			schedule();
+			lp_schedule (minor);
 	} while (!LP_READY(minor, status) && count < LP_CHAR(minor));
 
 	if (count == LP_CHAR(minor)) {
@@ -90,11 +126,11 @@ static inline int lp_char_polled(char lpchar, int minor)
 	stats->chars++;
 	/* must wait before taking strobe high, and after taking strobe
 	   low, according spec.  Some printers need it, others don't. */
-	while (wait != LP_WAIT(minor))
+	while (wait != LP_WAIT(minor)) /* FIXME: should be a udelay() */
 		wait++;
 	/* control port takes strobe high */
 	w_ctr(minor, LP_PSELECP | LP_PINITP | LP_PSTROBE);
-	while (wait)
+	while (wait)			/* FIXME: should be a udelay() */
 		wait--;
 	/* take strobe low */
 	w_ctr(minor, LP_PSELECP | LP_PINITP);
@@ -116,14 +152,14 @@ static inline int lp_char_polled(char lpchar, int minor)
 
 static inline int lp_char_interrupt(char lpchar, int minor)
 {
-	int wait;
+	unsigned int wait;
 	unsigned long count = 0;
 	unsigned char status;
 	struct lp_stats *stats;
 
 	do {
 		if(need_resched)
-			schedule();
+			lp_schedule (minor);
 		if ((status = r_str(minor)) & LP_PBUSY) {
 			if (!LP_CAREFUL_READY(minor, status))
 				return 0;
@@ -133,12 +169,12 @@ static inline int lp_char_interrupt(char lpchar, int minor)
 			/* must wait before taking strobe high, and after taking strobe
 			   low, according spec.  Some printers need it, others don't. */
 			wait = 0;
-			while (wait != LP_WAIT(minor))
-				wait++;
+			while (wait != LP_WAIT(minor)) /* FIXME: should be */
+				wait++;		       /* a udelay ()      */
 			/* control port takes strobe high */
 			w_ctr(minor, LP_PSELECP | LP_PINITP | LP_PSTROBE);
 			while (wait)
-				wait--;
+				wait--;	/* FIXME: should be a udelay() */
 			/* take strobe low */
 			w_ctr(minor, LP_PSELECP | LP_PINITP);
 			/* update waittime statistics */
@@ -164,7 +200,7 @@ static void lp_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	struct pardevice *pd = pb->cad;
 	struct lp_struct *lp_dev = (struct lp_struct *) pd->private;
 
-	if (lp_dev->lp_wait_q)
+	if (waitqueue_active (&lp_dev->lp_wait_q))
 		wake_up(&lp_dev->lp_wait_q);
 }
 
@@ -211,7 +247,8 @@ static inline int lp_write_interrupt(unsigned int minor, const char *buf, int co
 				}
 				LP_STAT(minor).sleeps++;
 				cli();
-				w_ctr(minor, LP_PSELECP | LP_PINITP | LP_PINTEN);
+				enable_irq(lp->dev->port->irq);
+				w_ctr(minor, LP_PSELECP|LP_PINITP|LP_PINTEN);
 				status = r_str(minor);
 				if ((!(status & LP_PACK) || (status & LP_PBUSY))
 				    && LP_CAREFUL_READY(minor, status)) {
@@ -222,6 +259,7 @@ static inline int lp_write_interrupt(unsigned int minor, const char *buf, int co
 				lp_table[minor].runchars = 0;
 				current->timeout = jiffies + LP_TIMEOUT_INTERRUPT;
 				interruptible_sleep_on(&lp->lp_wait_q);
+
 				w_ctr(minor, LP_PSELECP | LP_PINITP);
 				sti();
 				if (current->signal & ~current->blocked) {
@@ -267,7 +305,7 @@ static inline int lp_write_polled(unsigned int minor, const char *buf, int count
 					return temp-buf?temp-buf:-ENOSPC;
 				current->state = TASK_INTERRUPTIBLE;
 				current->timeout = jiffies + LP_TIMEOUT_POLLED;
-				schedule();
+				lp_schedule (minor);
 			} else
 			if (!(status & LP_PSELECD)) {
 				printk(KERN_INFO "lp%d off-line\n", minor);
@@ -275,7 +313,7 @@ static inline int lp_write_polled(unsigned int minor, const char *buf, int count
 					return temp-buf?temp-buf:-EIO;
 				current->state = TASK_INTERRUPTIBLE;
 				current->timeout = jiffies + LP_TIMEOUT_POLLED;
-				schedule();
+				lp_schedule (minor);
 			} else
 			/* not offline or out of paper. on fire? */
 			if (!(status & LP_PERRORP)) {
@@ -284,7 +322,7 @@ static inline int lp_write_polled(unsigned int minor, const char *buf, int count
 					return temp-buf?temp-buf:-EIO;
 				current->state = TASK_INTERRUPTIBLE;
 				current->timeout = jiffies + LP_TIMEOUT_POLLED;
-				schedule();
+				lp_schedule (minor);
 			}
 
 			/* check for signals before going to sleep */
@@ -302,7 +340,7 @@ static inline int lp_write_polled(unsigned int minor, const char *buf, int count
 			lp_table[minor].runchars=0;
 			current->state = TASK_INTERRUPTIBLE;
 			current->timeout = jiffies + LP_TIME(minor);
-			schedule();
+			lp_schedule (minor);
 		}
 	}
 	return temp-buf;
@@ -322,16 +360,14 @@ static long lp_write(struct inode * inode, struct file * file,
  	/* Claim Parport or sleep until it becomes available
  	 * (see lp_wakeup() for details)
  	 */
- 	if (parport_claim(lp_table[minor].dev)) {
- 		sleep_on(&lp_table[minor].lp_wait_q);
- 		lp_table[minor].lp_wait_q = NULL;
- 	}
+ 	lp_parport_claim (minor);
+
  	if (LP_IRQ(minor) > 0)
  		retv = lp_write_interrupt(minor, buf, count);
   	else
  		retv = lp_write_polled(minor, buf, count);
  
- 	parport_release(lp_table[minor].dev);
+ 	lp_parport_release (minor);
  	return retv;
 }
 
@@ -370,10 +406,7 @@ static long lp_read(struct inode * inode, struct file * file,
  	/* Claim Parport or sleep until it becomes available
  	 * (see lp_wakeup() for details)
  	 */
- 	if (parport_claim(lp_table[minor].dev)) {
- 		sleep_on(&lp_table[minor].lp_wait_q);
- 		lp_table[minor].lp_wait_q = NULL;
- 	}
+ 	lp_parport_claim (minor);
 
 	temp=buf;	
 #ifdef LP_READ_DEBUG 
@@ -399,7 +432,7 @@ static long lp_read(struct inode * inode, struct file * file,
 			udelay(50);
 			counter++;
 			if (need_resched)
-				schedule();
+				lp_schedule (minor);
 		} while ( (status == 0x40) && (counter < 20) );
 		if ( counter == 20 ) { /* Timeout */
 #ifdef LP_READ_DEBUG
@@ -418,7 +451,7 @@ static long lp_read(struct inode * inode, struct file * file,
 			udelay(20);
 			counter++;
 			if (need_resched)
-				schedule();
+				lp_schedule (minor);
 		} while ( (status == 0) && (counter < 20) );
 		if (counter == 20) { /* Timeout */
 #ifdef LP_READ_DEBUG
@@ -434,7 +467,7 @@ static long lp_read(struct inode * inode, struct file * file,
 			}
 			current->state=TASK_INTERRUPTIBLE;
 			current->timeout=jiffies + LP_TIME(minor);
-			schedule();
+			lp_schedule (minor);
 		}
 		counter=0;
 		if (( i & 1) != 0) {
@@ -656,7 +689,7 @@ void lp_wakeup(void *ref)
 {
 	struct lp_struct *lp_dev = (struct lp_struct *) ref;
 
-	if (!lp_dev->lp_wait_q)
+	if (!waitqueue_active (&lp_dev->lp_wait_q))
 		return;	/* Wake up whom? */
 
 	/* Claim the Parport */
@@ -691,8 +724,8 @@ int lp_init(void)
 			    (parport[0] == -3 &&
 			     pb->probe_info.class == PARPORT_CLASS_PRINTER)) {
 				lp_table[count].dev =
-				  parport_register_device(pb, dev_name, NULL, 
-						lp_wakeup,
+				  parport_register_device(pb, dev_name, 
+						lp_preempt, lp_wakeup,
 						lp_interrupt, PARPORT_DEV_TRAN,
 						(void *) &lp_table[count]);
 				lp_table[count].flags |= LP_EXIST;

drivers/char/mem.c

@@ -530,7 +530,8 @@ __initfunc(int chr_dev_init(void))
     defined (CONFIG_ATIXL_BUSMOUSE) || defined(CONFIG_SOFT_WATCHDOG) || \
     defined (CONFIG_AMIGAMOUSE) || defined (CONFIG_ATARIMOUSE) || \
     defined (CONFIG_PCWATCHDOG) || \
-    defined (CONFIG_APM) || defined (CONFIG_RTC) || defined (CONFIG_SUN_MOUSE)
+    defined (CONFIG_APM) || defined (CONFIG_RTC) || \
+    defined (CONFIG_SUN_MOUSE) || defined (CONFIG_NVRAM)
 	misc_init();
 #endif
 #ifdef CONFIG_SOUND

drivers/char/vt.c

@@ -490,6 +490,8 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 	case KIOCSOUND:
 		if (!perm)
 			return -EPERM;
+		if (arg)
+			arg = 1193180 / arg;
 		kd_mksound(arg, 0);
 		return 0;
 
@@ -505,6 +507,8 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 		 */
 		ticks = HZ * ((arg >> 16) & 0xffff) / 1000;
 		count = ticks ? (arg & 0xffff) : 0;
+		if (count)
+			count = 1193180 / count;
 		kd_mksound(count, ticks);
 		return 0;
 	}

drivers/misc/BUGS-parport

 Currently known (or at least suspected) bugs in parport:
 
-o /proc/parport is untested under 2.0.XX
-
-o SCSI aborts for PPA under 2.0.29 [reported by jmr].  Under investigation.
-
-o make config (etc) allow you to select CONFIG_PNP_PARPORT=m, CONFIG_PPA=y -
-  the resulting kernel won't link.
-
 o IEEE1284 code does not do the terminating handshake after transfers, which
   seems to upset some devices.
 

drivers/misc/parport_arc.c

-/* $Id$
- * Parallel-port routines for ARC onboard hardware.
+/* Parallel-port routines for ARC onboard hardware.
  *
- * Author: Phil Blundell <pjb27@cam.ac.uk>
+ * Author: Phil Blundell <Philip.Blundell@pobox.com>
  */
 
 #include <linux/tasks.h>
@@ -37,6 +36,20 @@ static unsigned int arc_read_data(struct parport *p)
 	return data_copy;
 }
 
+static void arc_inc_use_count(void)
+{
+#ifdef MODULE
+	MOD_INC_USE_COUNT;
+#endif
+}
+
+static void arc_dec_use_count(void)
+{
+#ifdef MODULE
+	MOD_DEC_USE_COUNT;
+#endif
+}
+
 static struct parport_operations arc_ops = 
 {
 	arc_write_data,
@@ -72,5 +85,8 @@ static struct parport_operations arc_ops =
 
 	arc_enable_irq,
 	arc_disable_irq,
-	arc_examine_irq 
+	arc_examine_irq,
+
+	arc_inc_use_count,
+	arc_dec_use_count
 };

drivers/misc/parport_ieee1284.c

-/* $Id$ 
- * IEEE-1284 implementation for parport.
+/* IEEE-1284 implementation for parport.
  *
- * Authors: Philip Blundell <pjb27@cam.ac.uk>
+ * Authors: Phil Blundell <Philip.Blundell@pobox.com>
  *          Carsten Gross <carsten@sol.wohnheim.uni-ulm.de>
  *	    Jose Renau <renau@acm.org>
  */

drivers/misc/parport_init.c

-/* $Id: parport_init.c,v 1.1.2.2 1997/04/18 15:00:52 phil Exp $
- * Parallel-port initialisation code.
+/* Parallel-port initialisation code.
  * 
  * Authors: David Campbell <campbell@tirian.che.curtin.edu.au>
- *          Tim Waugh <tmw20@cam.ac.uk>
+ *          Tim Waugh <tim@cyberelk.demon.co.uk>
  *	    Jose Renau <renau@acm.org>
  *
  * based on work by Grant Guenther <grant@torque.net>
@@ -62,17 +61,6 @@ int init_module(void)
 
 void cleanup_module(void)
 {
-	struct parport *port, *next;
-   
-	for (port = parport_enumerate(); port; port = next) {
-		next = port->next;
-		if (!(port->flags & PARPORT_FLAG_COMA))
-			parport_quiesce(port);
-		parport_proc_unregister(port);
-		kfree(port->name);
-		kfree(port);
-	}
-	
 	parport_proc_cleanup();
 }
 #else

drivers/misc/parport_pc.c

-/* $Id: parport_pc.c,v 1.1.2.3 1997/04/18 15:00:52 phil Exp $ 
- * Parallel-port routines for PC architecture
+/* Parallel-port routines for PC architecture
  * 
- * Authors: Phil Blundell <pjb27@cam.ac.uk>
- *          Tim Waugh <tmw20@cam.ac.uk>
+ * Authors: Phil Blundell <Philip.Blundell@pobox.com>
+ *          Tim Waugh <tim@cyberelk.demon.co.uk>
  *	    Jose Renau <renau@acm.org>
  *          David Campbell <campbell@tirian.che.curtin.edu.au>
  *
- * based on work by Grant Guenther <grant@torque.net>
- *              and Philip Blundell <Philip.Blundell@pobox.com>
+ * based on work by Grant Guenther <grant@torque.net> and Phil Blundell.
  */
 
 #include <linux/stddef.h>
@@ -153,7 +151,7 @@ static int pc_claim_resources(struct parport *p)
 {
 	/* FIXME check that resources are free */
 	if (p->irq != PARPORT_IRQ_NONE)
-		request_irq(p->irq, pc_null_intr_func, 0, p->name, NULL);
+		request_irq(p->irq, pc_null_intr_func, 0, p->name, p);
 	request_region(p->base, p->size, p->name);
 	if (p->modes & PARPORT_MODE_PCECR)
 		request_region(p->base+0x400, 3, p->name);
@@ -162,12 +160,14 @@ static int pc_claim_resources(struct parport *p)
 
 static void pc_save_state(struct parport *p, struct parport_state *s)
 {
-	/* FIXME */
+	s->u.pc.ctr = pc_read_control(p);
+	s->u.pc.ecr = pc_read_econtrol(p);
 }
 
 static void pc_restore_state(struct parport *p, struct parport_state *s)
 {
-	/* FIXME */
+	pc_write_control(p, s->u.pc.ctr);
+	pc_write_econtrol(p, s->u.pc.ecr);
 }
 
 static unsigned int pc_epp_read_block(struct parport *p, void *buf, unsigned  int length)
@@ -195,6 +195,20 @@ static int pc_examine_irq(struct parport *p)
 	return 0; /* FIXME */
 }
 
+static void pc_inc_use_count(void)
+{
+#ifdef MODULE
+	MOD_INC_USE_COUNT;
+#endif
+}
+
+static void pc_dec_use_count(void)
+{
+#ifdef MODULE
+	MOD_DEC_USE_COUNT;
+#endif
+}
+
 static struct parport_operations pc_ops = 
 {
 	pc_write_data,
@@ -230,7 +244,10 @@ static struct parport_operations pc_ops =
 
 	pc_enable_irq,
 	pc_disable_irq,
-	pc_examine_irq 
+	pc_examine_irq,
+
+	pc_inc_use_count,
+	pc_dec_use_count
 };
 
 /******************************************************
@@ -322,7 +339,6 @@ static int programmable_dma_support(struct parport *pb)
 		return dma;
 }
 
-#if 0
 /* Only called if port supports ECP mode.
  *
  * The only restriction on DMA channels is that it has to be
@@ -388,7 +404,6 @@ static int parport_dma_probe(struct parport *pb)
 	
 	return retv;
 }
-#endif
 
 /******************************************************
  *  MODE detection section:
@@ -449,18 +464,20 @@ static int parport_ECR_present(struct parport *pb)
 	  oecr = pc_read_econtrol(pb);
 
 	r = pc_read_control(pb);	
-	if ((pc_read_econtrol(pb) & 0x03) == (r & 0x03)) {
-		pc_write_control(pb, r ^ 0x03 ); /* Toggle bits 0-1 */
+	if ((pc_read_econtrol(pb) & 0x3) == (r & 0x3)) {
+		pc_write_control(pb, r ^ 0x2 ); /* Toggle bit 1 */
 
-		r= pc_read_control(pb);	
-		if ((pc_read_econtrol(pb) & 0x03) == (r & 0x03))
+		r = pc_read_control(pb);	
+		if ((pc_read_econtrol(pb) & 0x2) == (r & 0x2)) {
+			pc_write_control(pb, octr);
 			return 0; /* Sure that no ECR register exists */
+		}
 	}
 	
-	if ((pc_read_econtrol(pb) & 0x03 ) != 0x01)
+	if ((pc_read_econtrol(pb) & 0x3 ) != 0x1)
 		return 0;
 
-	pc_write_econtrol(pb,0x34);
+	pc_write_econtrol(pb, 0x34);
 	if (pc_read_econtrol(pb) != 0x35)
 		return 0;
 
@@ -846,6 +863,11 @@ static int probe_one_port(unsigned long int base, int irq, int dma)
 #undef printmode
 	printk("]\n");
 	parport_proc_register(p);
+	p->flags |= PARPORT_FLAG_COMA;
+
+	/* Done probing.  Now put the port into a sensible start-up state. */
+	pc_write_control(p, 0xc);
+	pc_write_data(p, 0);
 	return 1;
 }
 
@@ -860,11 +882,8 @@ int parport_pc_init(int *io, int *irq, int *dma)
 	} else {
 		/* Probe all the likely ports. */
 		count += probe_one_port(0x378, PARPORT_IRQ_AUTO, PARPORT_DMA_AUTO);
-		
-#if defined(__i386__)
 		count += probe_one_port(0x278, PARPORT_IRQ_AUTO, PARPORT_DMA_AUTO);
 		count += probe_one_port(0x3bc, PARPORT_IRQ_AUTO, PARPORT_DMA_AUTO);
-#endif
 	}
 	return count;
 }
@@ -877,22 +896,23 @@ MODULE_PARM(io, "1-" __MODULE_STRING(PC_MAX_PORTS) "i");
 MODULE_PARM(irq, "1-" __MODULE_STRING(PC_MAX_PORTS) "i");
 MODULE_PARM(dma, "1-" __MODULE_STRING(PC_MAX_PORTS) "i");
 
-static int init_module(void)
+int init_module(void)
 {	
 	return (parport_pc_init(io, irq, dma)?0:1);
 }
 
-static void cleanup_module(void)
+void cleanup_module(void)
 {
-	struct parport *p = parport_enumerate();
+	struct parport *p = parport_enumerate(), *tmp;
 	while (p) {
+		tmp = p->next;
 		if (p->modes & PARPORT_MODE_PCSPP) { 
 			if (!(p->flags & PARPORT_FLAG_COMA)) 
 				parport_quiesce(p);
 			parport_proc_unregister(p);
 			parport_unregister_port(p);
 		}
-		p = p->next;
+		p = tmp;
 	}
 }
 #endif

drivers/misc/parport_procfs.c

-/* $Id: parport_procfs.c,v 1.1.2.2 1997/04/18 15:00:52 phil Exp $
- * Parallel port /proc interface code.
+/* Parallel port /proc interface code.
  * 
  * Authors: David Campbell <campbell@tirian.che.curtin.edu.au>
  *          Tim Waugh <tmw20@cam.ac.uk>

drivers/misc/parport_share.c

-/* $Id: parport_share.c,v 1.1.2.2 1997/04/18 15:00:52 phil Exp $
- * Parallel-port resource manager code.
+/* Parallel-port resource manager code.
  * 
  * Authors: David Campbell <campbell@tirian.che.curtin.edu.au>
- *          Tim Waugh <tmw20@cam.ac.uk>
+ *          Tim Waugh <tim@cyberelk.demon.co.uk>
  *	    Jose Renau <renau@acm.org>
  *
  * based on work by Grant Guenther <grant@torque.net>
@@ -19,6 +18,10 @@
 #include <linux/kernel.h>
 #include <linux/malloc.h>
 
+#ifdef CONFIG_KERNELD
+#include <linux/kerneld.h>
+#endif
+
 #undef PARPORT_PARANOID
 
 static struct parport *portlist = NULL, *portlist_tail = NULL;
@@ -27,6 +30,10 @@ static int portcount = 0;
 /* Return a list of all the ports we know about. */
 struct parport *parport_enumerate(void)
 {
+#ifdef CONFIG_KERNELD
+	if (portlist == NULL)
+		request_module("parport_lowlevel");
+#endif
 	return portlist;
 }
 
@@ -93,7 +100,8 @@ void parport_unregister_port(struct parport *port)
 	struct parport *p;
 	kfree(port->name);
 	if (portlist == port) {
-		portlist = port->next;
+		if ((portlist = port->next) == NULL)
+			portlist_tail = NULL;
 	} else {
 		for (p = portlist; (p != NULL) && (p->next != port); 
 		     p=p->next);
@@ -184,6 +192,7 @@ struct pardevice *parport_register_device(struct parport *port, const char *name
 		port->lurker = tmp;
 
 	inc_parport_count();
+	port->ops->inc_use_count();
 
 	return tmp;
 }
@@ -218,6 +227,7 @@ void parport_unregister_device(struct pardevice *dev)
 	kfree(dev);
 
 	dec_parport_count();
+	port->ops->dec_use_count();
 
 	/* If there are no more devices, put the port to sleep. */
 	if (!port->devices)

drivers/net/Config.in

@@ -123,8 +123,8 @@ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   fi
 fi
 
-if [ ! "$CONFIG_PNP_PARPORT" = "n" ]; then
-  dep_tristate 'PLIP (parallel port) support' CONFIG_PLIP $CONFIG_PNP_PARPORT
+if [ ! "$CONFIG_PARPORT" = "n" ]; then
+  dep_tristate 'PLIP (parallel port) support' CONFIG_PLIP $CONFIG_PARPORT
 fi
 
 tristate 'PPP (point-to-point) support' CONFIG_PPP

drivers/net/tlan.h

+#ifndef TLAN_H
+#define TLAN_H
+
 /********************************************************************
  *
  *  Linux ThunderLAN Driver
@@ -18,6 +21,11 @@
 #include <asm/types.h>
 #include <linux/netdevice.h>
 
+#if LINUX_VERSION_CODE <= 0x20100
+#define net_device_stats	enet_statistics
+#endif
+
+
 
 
 	/*****************************************************************
@@ -37,7 +45,11 @@
 		#define TLAN_IGNORE	0
 		#define TLAN_RECORD	1
 
-		#define TLAN_DBG(lvl, format, args...)	if ( debug >= lvl ) printk( format, ##args );
+		#define TLAN_DBG(lvl, format, args...)	if ( debug & lvl ) printk( format, ##args );
+		#define TLAN_DEBUG_GNRL	0x0001
+		#define TLAN_DEBUG_TX	0x0002
+		#define TLAN_DEBUG_RX	0x0004 
+		#define TLAN_DEBUG_LIST	0x0008
 
 
 
@@ -50,7 +62,12 @@
 		/* NOTE: These should be moved to pci.h someday */
 		#define PCI_DEVICE_ID_NETELLIGENT_10 0xAE34
 		#define PCI_DEVICE_ID_NETELLIGENT_10_100 0xAE32
-		#define PCI_DEVICE_ID_NETFLEX_3_INTEGRATED 0xAE35
+		#define PCI_DEVICE_ID_NETFLEX_3P_INTEGRATED 0xAE35
+		#define PCI_DEVICE_ID_NETFLEX_3P 0xF130
+		#define PCI_DEVICE_ID_NETFLEX_3P_BNC 0xF150
+		#define PCI_DEVICE_ID_NETELLIGENT_10_100_PROLIANT 0xAE43
+		#define PCI_DEVICE_ID_NETELLIGENT_10_100_DUAL 0xAE40
+		#define PCI_DEVICE_ID_DESKPRO_4000_5233MMX 0xB011
 
 
 		typedef struct tlan_pci_id {
@@ -152,11 +169,12 @@
 			u32						timerSetAt;
 			u32						timerType;
 			struct timer_list		timer;
-			struct enet_statistics  stats;
+			struct net_device_stats	stats;
 			u32                     pciEntry;
 			u8                      pciRevision;
 			u8                      pciBus;
 			u8                      pciDeviceFn;
+			u8						tlanRev;
 			char                    devName[8];
 		} TLanPrivateInfo;
 
@@ -479,3 +497,7 @@ inline u32 TLan_HashFunc( u8 *a )
 
 } 
 
+
+
+
+#endif

drivers/pnp/parport_probe.c

@@ -52,7 +52,7 @@ static long read_polled(struct parport *port, char *buf,
 {
 	int i;
 	char *temp=buf;
-	int count = 0;
+	unsigned int count = 0;
 	unsigned char z=0;
 	unsigned char Byte=0;
 

drivers/scsi/ChangeLog.ncr53c8xx

+Thu Aug 23 23:43 1997 Gerard Roudier (groudier@club-internet.fr)
+	* revision 2.5a
+	- Update Configure.help for inclusion in linux-2.1.51/2/3
+	- Use BASE_2 address from PCI config space instead of some 
+	  IO register for getting the on-board SRAM bus address.
+	- Remove error testing of pcibios_read/write functions.
+	  These functions are intended to be used for successfully 
+	  detected PCI devices. Expecting error condition from them 
+	  is nothing but paranoia.
+
+Thu Aug 21 23:00 1997 Gerard Roudier (groudier@club-internet.fr)
+	* revision 2.5
+	- 53C860 chip support fix.
+	- Move the 'host_status' to the last DWORD of the CCB header.
+	  This header is copied back by the script processor. This 
+	  guarantees that the header is entirely copied back over 
+	  the PCI when the CPU completes a CCB.
+	- (re)read ISTAT prior to scanning CCBs for completion. This
+	  ensure that any posted buffer are flushed prior CCBs scan.
+	- Support for BIG ENDIAN cpu. Added by Cort <cort@cs.nmt.edu>.
+	  Initial patch did'nt support disconnections and tagged commands.
+	  I've completed the patch and it seems that all is ok now.
+	  Only some powerpc under 2.1.X is supported for the moment.
+	- Misc. trivial fixes and cleanups.
+
 Sat July 26 18:00 1997 Gerard Roudier (groudier@club-internet.fr)
 	* revision 2.4
 	Several clean-ups:

drivers/scsi/Config.in

@@ -84,8 +84,8 @@ fi
 if [ "$CONFIG_MCA" = "y" ]; then
   dep_tristate 'IBMMCA SCSI support' CONFIG_SCSI_IBMMCA $CONFIG_SCSI
 fi
-if [ "$CONFIG_PNP_PARPORT" != "n" ]; then
-  dep_tristate 'IOMEGA Parallel Port ZIP drive SCSI support' CONFIG_SCSI_PPA $CONFIG_SCSI $CONFIG_PNP_PARPORT
+if [ "$CONFIG_PARPORT" != "n" ]; then
+  dep_tristate 'IOMEGA Parallel Port ZIP drive SCSI support' CONFIG_SCSI_PPA $CONFIG_SCSI $CONFIG_PARPORT
   if [ "$CONFIG_SCSI_PPA" != "n" ]; then
     int  '  Pedantic EPP-checking'   CONFIG_SCSI_PPA_HAVE_PEDANTIC 2 0 3
     int  '  EPP timeout'             CONFIG_SCSI_PPA_EPP_TIME 128

drivers/scsi/README.ncr53c8xx

@@ -4,7 +4,7 @@ Written by Gerard Roudier <groudier@club-internet.fr>
 21 Rue Carnot
 95170 DEUIL LA BARRE - FRANCE
 
-19 June 1997
+23 August 1997
 ===============================================================================
 
 1.  Introduction
@@ -46,6 +46,9 @@ Written by Gerard Roudier <groudier@club-internet.fr>
       17.1 Features
       17.2 Symbios NVRAM layout
       17.3 Tekram  NVRAM layout
+18. Support for Big Endian
+      18.1 Big Endian CPU
+      18.2 NCR chip in Big Endian mode of operations
 
 ===============================================================================
 
@@ -83,7 +86,7 @@ This short documentation only describes the features of the NCR53C8XX
 driver, configuration parameters and control commands available
 through the proc SCSI file system read / write operations.
 
-This driver has been tested OK with linux/i386 and Linux/Alpha.
+This driver has been tested OK with linux/i386, Linux/Alpha and Linux/PPC.
 
 Latest driver version and patches are available at:
 
@@ -429,7 +432,10 @@ this feature after boot-up only for devices that support it safely.
 
 CONFIG_SCSI_NCR53C8XX_IOMAPPED       (default answer: n)
     Answer "y" if you suspect your mother board to not allow memory mapped I/O.
-    May slow down performance a little.
+    May slow down performance a little.  This option is required by
+    Linux/PPC and is used no matter what you select here.  Linux/PPC
+    suffers no performance loss with this option since all IO is memory
+    mapped anyway.
 
 CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE    (default answer: n)
     Answer "y" if you are sure that all your SCSI devices that are able to 
@@ -1430,8 +1436,29 @@ default nvram data:
 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0xfbbc
 
-===============================================================================
-End of NCR53C8XX driver README file
 
+18. Support for Big Endian
+
+The PCI local bus has been primarily designed for x86 architecture.
+As a consequence, PCI devices generally expect DWORDS using little endian 
+byte ordering.
+
+18.1 Big Endian CPU
 
+In order to support NCR chips on a Big Endian architecture the driver has to 
+perform byte reordering each time it is needed. This feature has been 
+added to the driver by Cort <cort@cs.nmt.edu> and is available in driver 
+version 2.5 and later ones. For the moment Big Endian support has only 
+been tested on Linux/PPC (PowerPC).
 
+18.2 NCR chip in Big Endian mode of operations
+
+It can be read in SYMBIOS documentation that some chips support a special 
+Big Endian mode, on paper: 53C815, 53C825A, 53C875, 53C875N, 53C895.
+This mode of operations is not software-selectable, but needs pin named 
+BigLit to be pulled-up. Using this mode, most of byte reorderings should 
+be avoided when the driver is running on a Big Endian CPU.
+Driver version 2.5 is also, in theory, ready for this feature.
+
+===============================================================================
+End of NCR53C8XX driver README file

drivers/scsi/ncr53c8xx.h

@@ -45,7 +45,7 @@
 /*
 **	Name and revision of the driver
 */
-#define SCSI_NCR_DRIVER_NAME		"ncr53c8xx - revision 2.4"
+#define SCSI_NCR_DRIVER_NAME		"ncr53c8xx - revision 2.5a"
 
 /*
 **	Check supported Linux versions
@@ -155,9 +155,11 @@
 #endif
 
 /*
- * Use normal IO if configured. Forced for alpha.
+ * Use normal IO if configured. Forced for alpha and ppc.
  */
-#if defined(CONFIG_SCSI_NCR53C8XX_IOMAPPED) || defined(__alpha__)
+#if defined(CONFIG_SCSI_NCR53C8XX_IOMAPPED)
+#define	SCSI_NCR_IOMAPPED
+#elif defined(__alpha__) || defined(__powerpc__)
 #define	SCSI_NCR_IOMAPPED
 #endif
 
@@ -315,6 +317,45 @@ int ncr53c8xx_release(struct Scsi_Host *);
 
 #ifndef HOSTS_C
 
+/*
+**	IO functions definition for big/little endian support.
+**	For now, the NCR is only supported in little endian addressing mode, 
+**	and big endian byte ordering is only supported for the PPC.
+**	MMIO is not used on PPC.
+*/
+
+#ifdef	__BIG_ENDIAN
+
+#if	LINUX_VERSION_CODE < LinuxVersionCode(2,1,0)
+#error	"BIG ENDIAN byte ordering needs kernel version >= 2.1.0"
+#endif
+
+#ifdef	__powerpc__
+#define	inw_l2b		inw
+#define	inl_l2b		inl
+#define	outw_b2l	outw
+#define	outl_b2l	outl
+#else
+#error	"Support for BIG ENDIAN is only available for the PowerPC"
+#endif
+
+#else	/* Assumed x86 or alpha */
+
+#define	inw_raw		inw
+#define	inl_raw		inl
+#define	outw_raw	outw
+#define	outl_raw	outl
+#define	readw_raw	readw
+#define	readl_raw	readl
+#define	writew_raw	writew
+#define	writel_raw	writel
+
+#endif
+
+#ifdef	SCSI_NCR_BIG_ENDIAN
+#error	"The NCR in BIG ENDIAN adressing mode is not (yet) supported"
+#endif
+
 /*
 **	NCR53C8XX Device Ids
 */
@@ -416,7 +457,7 @@ typedef struct {
  FE_WIDE|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM}		\
  ,									\
  {PCI_DEVICE_ID_NCR_53C860, 0xff, "860",  4,  8, 5,			\
- FE_WIDE|FE_ULTRA|FE_CLK80|FE_CACHE_SET|FE_BOF|FE_LDSTR|FE_PFEN|FE_RAM}	\
+ FE_ULTRA|FE_CLK80|FE_CACHE_SET|FE_BOF|FE_LDSTR|FE_PFEN}		\
  ,									\
  {PCI_DEVICE_ID_NCR_53C875, 0x01, "875",  7, 16, 5,			\
  FE_WIDE|FE_ULTRA|FE_CLK80|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM}\

drivers/scsi/scsi_ioctl.c

@@ -9,6 +9,7 @@
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>
+#include <asm/page.h>
 
 #include <linux/errno.h>
 #include <linux/kernel.h>
@@ -23,7 +24,7 @@
 
 #define MAX_RETRIES 5   
 #define MAX_TIMEOUT (9 * HZ)
-#define MAX_BUF 4096
+#define MAX_BUF PAGE_SIZE
 
 #define max(a,b) (((a) > (b)) ? (a) : (b))
 
@@ -73,12 +74,9 @@ static int ioctl_probe(struct Scsi_Host * host, void *buffer)
  * 
  * *(char *) ((int *) arg)[2] the actual command byte.   
  * 
- * Note that no more than MAX_BUF data bytes will be transfered.  Since
- * SCSI block device size is 512 bytes, I figured 1K was good.
- * but (WDE) changed it to 8192 to handle large bad track buffers.
- * ERY: I changed this to a dynamic allocation using scsi_malloc - we were
- * getting a kernel stack overflow which was crashing the system when we
- * were using 8192 bytes.
+ * Note that if more than MAX_BUF bytes are requested to be transfered,
+ * the ioctl will fail with error EINVAL.  MAX_BUF can be increased in
+ * the future by increasing the size that scsi_malloc will accept.
  * 
  * This size *does not* include the initial lengths that were passed.
  * 
@@ -201,8 +199,8 @@ static int ioctl_command(Scsi_Device *dev, Scsi_Ioctl_Command *sic)
      * If the user needs to transfer more data than this, they
      * should use scsi_generics instead.
      */
-    if( inlen > MAX_BUF ) inlen = MAX_BUF;
-    if( outlen > MAX_BUF ) outlen = MAX_BUF;
+    if( inlen > MAX_BUF ) return -EINVAL;
+    if( outlen > MAX_BUF ) return -EINVAL;
 
     cmd_in = sic->data;
     get_user(opcode, cmd_in); 

fs/attr.c

@@ -17,83 +17,87 @@
 /* POSIX UID/GID verification for setting inode attributes. */
 int inode_change_ok(struct inode *inode, struct iattr *attr)
 {
+	int retval = -EPERM;
+	unsigned int ia_valid = attr->ia_valid;
+
 	/* If force is set do it anyway. */
-	if (attr->ia_valid & ATTR_FORCE)
-		return 0;
+	if (ia_valid & ATTR_FORCE)
+		goto fine;
 
 	/* Make sure a caller can chown. */
-	if ((attr->ia_valid & ATTR_UID) &&
+	if ((ia_valid & ATTR_UID) &&
 	    (current->fsuid != inode->i_uid ||
 	     attr->ia_uid != inode->i_uid) && !fsuser())
-		return -EPERM;
+		goto error;
 
 	/* Make sure caller can chgrp. */
-	if ((attr->ia_valid & ATTR_GID) &&
+	if ((ia_valid & ATTR_GID) &&
 	    (!in_group_p(attr->ia_gid) && attr->ia_gid != inode->i_gid) &&
 	    !fsuser())
-		return -EPERM;
+		goto error;
 
 	/* Make sure a caller can chmod. */
-	if (attr->ia_valid & ATTR_MODE) {
+	if (ia_valid & ATTR_MODE) {
 		if ((current->fsuid != inode->i_uid) && !fsuser())
-			return -EPERM;
+			goto error;
 		/* Also check the setgid bit! */
-		if (!fsuser() && !in_group_p((attr->ia_valid & ATTR_GID) ? attr->ia_gid :
+		if (!fsuser() && !in_group_p((ia_valid & ATTR_GID) ? attr->ia_gid :
 					     inode->i_gid))
 			attr->ia_mode &= ~S_ISGID;
 	}
 
 	/* Check for setting the inode time. */
-	if ((attr->ia_valid & ATTR_ATIME_SET) &&
-	    ((current->fsuid != inode->i_uid) && !fsuser()))
-		return -EPERM;
-	if ((attr->ia_valid & ATTR_MTIME_SET) &&
-	    ((current->fsuid != inode->i_uid) && !fsuser()))
-		return -EPERM;
-	return 0;
+	if (ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET)) {
+		if (current->fsuid != inode->i_uid && !fsuser())
+			goto error;
+	}
+fine:
+	retval = 0;
+error:
+	return retval;
 }
 
 void inode_setattr(struct inode * inode, struct iattr * attr)
 {
-	if(attr->ia_valid &
-	   (ATTR_UID|ATTR_GID|ATTR_SIZE|ATTR_ATIME|ATTR_MTIME|ATTR_CTIME|ATTR_MODE)) {
-		if (attr->ia_valid & ATTR_UID)
-			inode->i_uid = attr->ia_uid;
-		if (attr->ia_valid & ATTR_GID)
-			inode->i_gid = attr->ia_gid;
-		if (attr->ia_valid & ATTR_SIZE)
-			inode->i_size = attr->ia_size;
-		if (attr->ia_valid & ATTR_ATIME)
-			inode->i_atime = attr->ia_atime;
-		if (attr->ia_valid & ATTR_MTIME)
-			inode->i_mtime = attr->ia_mtime;
-		if (attr->ia_valid & ATTR_CTIME)
-			inode->i_ctime = attr->ia_ctime;
-		if (attr->ia_valid & ATTR_MODE) {
-			inode->i_mode = attr->ia_mode;
-			if (!fsuser() && !in_group_p(inode->i_gid))
-				inode->i_mode &= ~S_ISGID;
-		}
-		mark_inode_dirty(inode);
+	unsigned int ia_valid = attr->ia_valid;
+
+	if (ia_valid & ATTR_UID)
+		inode->i_uid = attr->ia_uid;
+	if (ia_valid & ATTR_GID)
+		inode->i_gid = attr->ia_gid;
+	if (ia_valid & ATTR_SIZE)
+		inode->i_size = attr->ia_size;
+	if (ia_valid & ATTR_ATIME)
+		inode->i_atime = attr->ia_atime;
+	if (ia_valid & ATTR_MTIME)
+		inode->i_mtime = attr->ia_mtime;
+	if (ia_valid & ATTR_CTIME)
+		inode->i_ctime = attr->ia_ctime;
+	if (ia_valid & ATTR_MODE) {
+		inode->i_mode = attr->ia_mode;
+		if (!fsuser() && !in_group_p(inode->i_gid))
+			inode->i_mode &= ~S_ISGID;
 	}
+	mark_inode_dirty(inode);
 }
 
 int notify_change(struct inode * inode, struct iattr * attr)
 {
 	int error;
 	time_t now = CURRENT_TIME;
+	unsigned int ia_valid = attr->ia_valid;
 
 	attr->ia_ctime = now;
-	if ((attr->ia_valid & (ATTR_ATIME | ATTR_ATIME_SET)) == ATTR_ATIME)
+	if (!(ia_valid & ATTR_ATIME_SET))
 		attr->ia_atime = now;
-	if ((attr->ia_valid & (ATTR_MTIME | ATTR_MTIME_SET)) == ATTR_MTIME)
+	if (!(ia_valid & ATTR_MTIME_SET))
 		attr->ia_mtime = now;
-	attr->ia_valid &= ~(ATTR_CTIME);
+
 	if (inode->i_sb && inode->i_sb->s_op && inode->i_sb->s_op->notify_change) 
 		return inode->i_sb->s_op->notify_change(inode, attr);
+
 	error = inode_change_ok(inode, attr);
-	if(!error)
+	if (!error)
 		inode_setattr(inode, attr);
 	return error;
 }
-

fs/binfmt_misc.c

@@ -12,6 +12,7 @@
  *  1997-05-19 cleanup
  *  1997-06-26 hpa: pass the real filename rather than argv[0]
  *  1997-06-30 minor cleanup
+ *  1997-08-09 removed extension stripping, locking cleanup
  */
 
 #include <linux/module.h>
@@ -31,10 +32,6 @@
 
 #define VERBOSE_STATUS /* undef this to save 400 bytes kernel memory */
 
-#ifndef MIN
-#define MIN(x,y) (((x)<(y))?(x):(y))
-#endif
-
 struct binfmt_entry {
 	struct binfmt_entry *next;
 	int id;
@@ -50,7 +47,6 @@ struct binfmt_entry {
 
 #define ENTRY_ENABLED 1		/* the old binfmt_entry.enabled */
 #define	ENTRY_MAGIC 8		/* not filename detection */
-#define ENTRY_STRIP_EXT 32	/* strip off last filename extension */
 
 static int load_misc_binary(struct linux_binprm *bprm, struct pt_regs *regs);
 static void entry_proc_cleanup(struct binfmt_entry *e);
@@ -70,7 +66,9 @@ static struct binfmt_entry *entries = NULL;
 static int free_id = 1;
 static int enabled = 1;
 
+#ifdef __SMP__
 static rwlock_t entries_lock = RW_LOCK_UNLOCKED;
+#endif
 
 
 /*
@@ -84,12 +82,14 @@ static void clear_entry(int id)
 	ep = &entries;
 	while (*ep && ((*ep)->id != id))
 		ep = &((*ep)->next);
-	if ((e = *ep)) {
+	if ((e = *ep))
 		*ep = e->next;
+	write_unlock(&entries_lock);
+
+	if (e) {
 		entry_proc_cleanup(e);
 		kfree(e);
 	}
-	write_unlock(&entries_lock);
 }
 
 /*
@@ -97,29 +97,45 @@ static void clear_entry(int id)
  */
 static void clear_entries(void)
 {
-	struct binfmt_entry *e;
+	struct binfmt_entry *e, *n;
 
 	write_lock(&entries_lock);
-	while ((e = entries)) {
-		entries = entries->next;
+	n = entries;
+	entries = NULL;
+	write_unlock(&entries_lock);
+
+	while ((e = n)) {
+		n = e->next;
 		entry_proc_cleanup(e);
 		kfree(e);
 	}
-	write_unlock(&entries_lock);
 }
 
 /*
- * Find entry through id - caller has to do locking
+ * Find entry through id and lock it
  */
 static struct binfmt_entry *get_entry(int id)
 {
-	struct binfmt_entry *e = entries;
+	struct binfmt_entry *e;
 
+	read_lock(&entries_lock);
+	e = entries;
 	while (e && (e->id != id))
 		e = e->next;
+	if (!e)
+		read_unlock(&entries_lock);
 	return e;
 }
 
+/*
+ * unlock entry
+ */
+static inline void put_entry(struct binfmt_entry *e)
+{
+	if (e)
+		read_unlock(&entries_lock);
+}
+
 
 /* 
  * Check if we support the binfmt
@@ -128,10 +144,11 @@ static struct binfmt_entry *get_entry(int id)
  */
 static struct binfmt_entry *check_file(struct linux_binprm *bprm)
 {
-	struct binfmt_entry *e = entries;
+	struct binfmt_entry *e;
 	char *p = strrchr(bprm->filename, '.');
 	int j;
 
+	e = entries;
 	while (e) {
 		if (e->flags & ENTRY_ENABLED) {
 			if (!(e->flags & ENTRY_MAGIC)) {
@@ -160,7 +177,7 @@ static int load_misc_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 	struct binfmt_entry *fmt;
 	struct dentry * dentry;
 	char iname[128];
-	char *iname_addr = iname, *p;
+	char *iname_addr = iname;
 	int retval, fmt_flags = 0;
 
 	MOD_INC_USE_COUNT;
@@ -186,9 +203,6 @@ static int load_misc_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 	bprm->dentry = NULL;
 
 	/* Build args for interpreter */
-	if ((fmt_flags & ENTRY_STRIP_EXT) &&
-	    (p = strrchr(bprm->filename, '.')))
-		*p = '\0';
 	remove_arg_zero(bprm);
 	bprm->p = copy_strings(1, &bprm->filename, bprm->page, bprm->p, 2);
 	bprm->argc++;
@@ -288,13 +302,12 @@ static int proc_write_register(struct file *file, const char *buffer,
 
 	e->proc_name = copyarg(&dp, &sp, &cnt, del, 0, &err);
 
-	/* we can use bit 3 and 5 of type for ext/magic and ext-strip
-	   flag due to the nice encoding of E, M, e and m */
-	if ((*sp & 0x92) || (sp[1] != del))
+	/* we can use bit 3 of type for ext/magic
+	   flag due to the nice encoding of E and M */
+	if ((*sp & ~('E' | 'M')) || (sp[1] != del))
 		err = -EINVAL;
 	else
-		e->flags = (*sp++ & (ENTRY_MAGIC | ENTRY_STRIP_EXT))
-			    | ENTRY_ENABLED;
+		e->flags = (*sp++ & (ENTRY_MAGIC | ENTRY_ENABLED));
 	cnt -= 2; sp++;
 
 	e->offset = 0;
@@ -342,17 +355,17 @@ static int proc_read_status(char *page, char **start, off_t off,
 {
 	struct binfmt_entry *e;
 	char *dp;
-	int elen, i;
+	int elen, i, err;
 
 	MOD_INC_USE_COUNT;
 #ifndef VERBOSE_STATUS
 	if (data) {
-		read_lock(&entries_lock);
-		if (!(e = get_entry((int) data)))
-			i = 0;
-		else
-			i = e->flags & ENTRY_ENABLED;
-		read_unlock(&entries_lock);
+		if (!(e = get_entry((int) data))) {
+			err = -ENOENT;
+			goto _err;
+		}
+		i = e->flags & ENTRY_ENABLED;
+		put_entry(e);
 	} else {
 		i = enabled;
 	} 
@@ -361,10 +374,9 @@ static int proc_read_status(char *page, char **start, off_t off,
 	if (!data)
 		sprintf(page, "%s\n", (enabled ? "enabled" : "disabled"));
 	else {
-		read_lock(&entries_lock);
 		if (!(e = get_entry((int) data))) {
-			*page = '\0';
-			goto _out;
+			err = -ENOENT;
+			goto _err;
 		}
 		sprintf(page, "%s\ninterpreter %s\n",
 		        (e->flags & ENTRY_ENABLED ? "enabled" : "disabled"),
@@ -391,10 +403,7 @@ static int proc_read_status(char *page, char **start, off_t off,
 			*dp++ = '\n';
 			*dp = '\0';
 		}
-		if (e->flags & ENTRY_STRIP_EXT)
-			sprintf(dp, "extension stripped\n");
-_out:
-		read_unlock(&entries_lock);
+		put_entry(e);
 	}
 #endif
 
@@ -403,9 +412,11 @@ static int proc_read_status(char *page, char **start, off_t off,
 		elen = 0;
 	*eof = (elen <= count) ? 1 : 0;
 	*start = page + off;
+	err = elen;
 
+_err:
 	MOD_DEC_USE_COUNT;
-	return elen;
+	return err;
 }
 
 /*
@@ -419,18 +430,18 @@ static int proc_write_status(struct file *file, const char *buffer,
 	int res = count;
 
 	MOD_INC_USE_COUNT;
-	if (((buffer[0] == '1') || (buffer[0] == '0')) &&
-	    ((count == 1) || ((count == 2) && (buffer[1] == '\n')))) {
+	if (buffer[count-1] == '\n')
+		count--;
+	if ((count == 1) && !(buffer[0] & ~('0' | '1'))) {
 		if (data) {
-			read_lock(&entries_lock);
 			if ((e = get_entry((int) data)))
-				e->flags = (e->flags & -2) | (int) (buffer[0] - '0');
-			read_unlock(&entries_lock);
+				e->flags = (e->flags & ~ENTRY_ENABLED)
+					    | (int)(buffer[0] - '0');
+			put_entry(e);
 		} else {
 			enabled = buffer[0] - '0';
 		}
-	} else if ((buffer[0] == '-') && (buffer[1] == '1') &&
-	       ((count == 2) || ((count == 3) && (buffer[2] == '\n')))) {
+	} else if ((count == 2) && (buffer[0] == '-') && (buffer[1] == '1')) {
 		if (data)
 			clear_entry((int) data);
 		else

fs/buffer.c

@@ -823,12 +823,8 @@ printk("refill_freelist: waking bdflush\n");
 struct buffer_head * getblk(kdev_t dev, int block, int size)
 {
 	struct buffer_head * bh;
-	int isize = BUFSIZE_INDEX(size);
+	int isize;
 
-	/* If there are too many dirty buffers, we wake up the update process
-	 * now so as to ensure that there are still clean buffers available
-	 * for user processes to use (and dirty).
-	 */
 repeat:
 	bh = get_hash_table(dev, block, size);
 	if (bh) {
@@ -841,17 +837,15 @@ struct buffer_head * getblk(kdev_t dev, int block, int size)
 		return bh;
 	}
 
-	while(!free_list[isize])
-		refill_freelist(size);
-	
-	if (find_buffer(dev,block,size))
-		 goto repeat;
-
+	isize = BUFSIZE_INDEX(size);
+get_free:
 	bh = free_list[isize];
+	if (!bh)
+		goto refill;
 	remove_from_free_list(bh);
 
 	/* OK, FINALLY we know that this buffer is the only one of its kind,
-	 * and that it's unused (b_count=0), unlocked (buffer_locked=0), and clean.
+	 * and that it's unused (b_count=0), unlocked, and clean.
 	 */
 	bh->b_count=1;
 	bh->b_list	= BUF_CLEAN;
@@ -862,6 +856,16 @@ struct buffer_head * getblk(kdev_t dev, int block, int size)
 	bh->b_blocknr=block;
 	insert_into_queues(bh);
 	return bh;
+
+	/*
+	 * If we block while refilling the free list, somebody may
+	 * create the buffer first ... search the hashes again.
+	 */
+refill:
+	refill_freelist(size);
+	if (!find_buffer(dev,block,size))
+		goto get_free;
+	goto repeat;
 }
 
 void set_writetime(struct buffer_head * buf, int flag)

fs/dcache.c

@@ -19,6 +19,9 @@
 #include <linux/malloc.h>
 #include <linux/init.h>
 
+/* For managing the dcache */
+extern int nr_free_pages, free_pages_low;
+
 /*
  * This is the single most critical data structure when it comes
  * to the dcache: the hashtable for lookups. Somebody should try
@@ -72,13 +75,13 @@ void dput(struct dentry *dentry)
 		dentry->d_count = count;
 		if (!count) {
 			list_del(&dentry->d_lru);
+			if (dentry->d_op && dentry->d_op->d_delete)
+				dentry->d_op->d_delete(dentry);
 			if (list_empty(&dentry->d_hash)) {
 				struct inode *inode = dentry->d_inode;
 				struct dentry * parent;
-				if (inode) {
-					list_del(&dentry->d_alias);
+				if (inode)
 					iput(inode);
-				}
 				parent = dentry->d_parent;
 				d_free(dentry);
 				if (dentry == parent)
@@ -134,7 +137,6 @@ void shrink_dcache(void)
 			if (dentry->d_inode) {
 				struct inode * inode = dentry->d_inode;
 
-				list_del(&dentry->d_alias);
 				dentry->d_inode = NULL;
 				iput(inode);
 			}
@@ -152,6 +154,13 @@ struct dentry * d_alloc(struct dentry * parent, const struct qstr *name)
 	char * str;
 	struct dentry *dentry;
 
+	/*
+	 * Check whether to shrink the dcache ... this greatly reduces
+	 * the likelyhood that kmalloc() will need additional memory.
+	 */
+	if (nr_free_pages < free_pages_low)
+		shrink_dcache();
+
 	dentry = kmalloc(sizeof(struct dentry), GFP_KERNEL);
 	if (!dentry)
 		return NULL;
@@ -172,7 +181,6 @@ struct dentry * d_alloc(struct dentry * parent, const struct qstr *name)
 	dentry->d_mounts = dentry;
 	dentry->d_covers = dentry;
 	INIT_LIST_HEAD(&dentry->d_hash);
-	INIT_LIST_HEAD(&dentry->d_alias);
 	INIT_LIST_HEAD(&dentry->d_lru);
 
 	dentry->d_name.name = str;
@@ -194,9 +202,6 @@ struct dentry * d_alloc(struct dentry * parent, const struct qstr *name)
  */
 void d_instantiate(struct dentry *entry, struct inode * inode)
 {
-	if (inode)
-		list_add(&entry->d_alias, &inode->i_dentry);
-
 	entry->d_inode = inode;
 }
 
@@ -312,10 +317,10 @@ void d_delete(struct dentry * dentry)
 	 */
 	if (dentry->d_count == 1) {
 		struct inode * inode = dentry->d_inode;
-
-		dentry->d_inode = NULL;
-		list_del(&dentry->d_alias);
-		iput(inode);
+		if (inode) {
+			dentry->d_inode = NULL;
+			iput(inode);
+		}
 		return;
 	}
 

fs/exec.c

@@ -134,21 +134,23 @@ int unregister_binfmt(struct linux_binfmt * fmt)
 }
 #endif	/* CONFIG_MODULES */
 
+/* N.B. Error returns must be < 0 */
 int open_dentry(struct dentry * dentry, int mode)
 {
 	int fd;
 	struct inode * inode = dentry->d_inode;
+	struct file * f;
+	int error;
 
+	error = -EINVAL;
 	if (!inode->i_op || !inode->i_op->default_file_ops)
-		return -EINVAL;
+		goto out;
 	fd = get_unused_fd();
 	if (fd >= 0) {
-		struct file * f = get_empty_filp();
-
-		if (!f) {
-			put_unused_fd(fd);
-			return -ENFILE;
-		}
+		error = -ENFILE;
+		f = get_empty_filp();
+		if (!f)
+			goto out_fd;
 		f->f_flags = mode;
 		f->f_mode = (mode+1) & O_ACCMODE;
 		f->f_dentry = dentry;
@@ -156,17 +158,23 @@ int open_dentry(struct dentry * dentry, int mode)
 		f->f_reada = 0;
 		f->f_op = inode->i_op->default_file_ops;
 		if (f->f_op->open) {
-			int error = f->f_op->open(inode,f);
-			if (error) {
-				put_filp(f);
-				put_unused_fd(fd);
-				return error;
-			}
+			error = f->f_op->open(inode,f);
+			if (error)
+				goto out_filp;
 		}
 		current->files->fd[fd] = f;
 		dget(dentry);
 	}
 	return fd;
+
+out_filp:
+	if (error > 0)
+		error = -EIO;
+	put_filp(f);
+out_fd:
+	put_unused_fd(fd);
+out:
+	return error;
 }
 
 /*
@@ -379,37 +387,53 @@ int read_exec(struct dentry *dentry, unsigned long offset,
 	return result;
 }
 
-static void exec_mmap(void)
+static int exec_mmap(void)
 {
+	struct mm_struct * mm, * old_mm;
+	int retval;
+
+	if (current->mm->count == 1) {
+		flush_cache_mm(current->mm);
+		exit_mmap(current->mm);
+		clear_page_tables(current);
+		flush_tlb_mm(current->mm);
+		return 0;
+	}
+
 	/*
 	 * The clear_page_tables done later on exec does the right thing
 	 * to the page directory when shared, except for graceful abort
 	 * (the oom is wrong there, too, IMHO)
 	 */
-	if (current->mm->count > 1) {
-		struct mm_struct *mm = kmem_cache_alloc(mm_cachep, SLAB_KERNEL);
-		if (!mm) {
-			/* this is wrong, I think. */
-			oom(current);
-			return;
-		}
-		*mm = *current->mm;
-		init_new_context(mm);
-		mm->def_flags = 0;	/* should future lockings be kept? */
-		mm->cpu_vm_mask = (1UL << smp_processor_id());
-		mm->count = 1;
-		mm->mmap = mm->mmap_cache = NULL;
-		mm->total_vm = 0;
-		mm->rss = 0;
-		current->mm->count--;
-		current->mm = mm;
-		new_page_tables(current);
-		return;
-	}
-	flush_cache_mm(current->mm);
-	exit_mmap(current->mm);
-	clear_page_tables(current);
-	flush_tlb_mm(current->mm);
+	retval = -ENOMEM;
+	mm = mm_alloc();
+	if (!mm)
+		goto fail_nomem;
+	mm->cpu_vm_mask = (1UL << smp_processor_id());
+	mm->total_vm = 0;
+	mm->rss = 0;
+	old_mm = current->mm;
+	current->mm = mm;
+	retval = new_page_tables(current);
+	if (retval)
+		goto fail_restore;
+	mmput(old_mm);
+	return 0;
+
+	/*
+	 * Failure ... restore the prior mm_struct.
+	 */
+fail_restore:
+	current->mm = old_mm;
+	mmput(mm);
+
+	/*
+	 * N.B. binfmt_xxx needs to handle the error instead of oom()
+	 */
+fail_nomem:
+	/* this is wrong, I think. */
+	oom(current);
+	return retval;
 }
 
 /*
@@ -454,9 +478,16 @@ static inline void flush_old_files(struct files_struct * files)
 
 void flush_old_exec(struct linux_binprm * bprm)
 {
-	int i;
-	int ch;
 	char * name;
+	int i, ch, retval;
+
+	/* 
+	 * Release all of the old mmap stuff ... do this first
+	 * so we can bail out on failure.
+	 */
+	retval = exec_mmap();
+	if (retval)
+		goto out;
 
 	if (current->euid == current->uid && current->egid == current->gid)
 		current->dumpable = 1;
@@ -470,9 +501,6 @@ void flush_old_exec(struct linux_binprm * bprm)
 	}
 	current->comm[i] = '\0';
 
-	/* Release all of the old mmap stuff. */
-	exec_mmap();
-
 	flush_thread();
 
 	if (bprm->e_uid != current->euid || bprm->e_gid != current->egid || 
@@ -481,6 +509,8 @@ void flush_old_exec(struct linux_binprm * bprm)
 
 	flush_old_signals(current->sig);
 	flush_old_files(current->files);
+out:
+	return; /* retval; FIXME. */
 }
 
 /* 

fs/file_table.c

@@ -43,26 +43,6 @@ static inline void put_inuse(struct file *file)
 	file->f_pprev = &inuse_filps;
 }
 
-/* Get more free filp's. */
-static int grow_files(void)
-{
-	int i = 16;
-
-	while(i--) {
-		struct file * file = kmem_cache_alloc(filp_cache, SLAB_KERNEL);
-		if(!file) {
-			if(i == 15)
-				return 0;
-			goto got_some;
-		}
-
-		insert_file_free(file);
-		nr_files++;
-	}
-got_some:
-	return 1;
-}
-
 void file_table_init(void)
 {
 	filp_cache = kmem_cache_create("filp", sizeof(struct file),
@@ -78,28 +58,36 @@ void file_table_init(void)
  */
 struct file * get_empty_filp(void)
 {
+	static int old_max = 0;
 	struct file * f;
 
-again:
-	if((f = free_filps) != NULL) {
-		remove_filp(f);
-		memset(f, 0, sizeof(*f));
-		f->f_count = 1;
-		f->f_version = ++event;
-		put_inuse(f);
-	} else {
-		int max = max_files;
-
-		/* Reserve a few files for the super-user.. */
-		if (current->euid)
-			max -= 10;
-
-		if (nr_files < max && grow_files())
-			goto again;
+	f = free_filps;
+	if (!f) 
+		goto get_more;
+	remove_filp(f);
+got_one:
+	memset(f, 0, sizeof(*f));
+	f->f_count = 1;
+	f->f_version = ++event;
+	put_inuse(f);
+	return f;
 
+get_more:
+	/* Reserve a few files for the super-user.. */
+	if (nr_files < (current->euid ? max_files - 10 : max_files)) {
+		f = kmem_cache_alloc(filp_cache, SLAB_KERNEL);
+		if (f) {
+			nr_files++;
+			goto got_one;
+		}
 		/* Big problems... */
+		printk("VFS: filp allocation failed\n");
+
+	} else if (max_files > old_max) {
+		printk("VFS: file-max limit %d reached\n", max_files);
+		old_max = max_files;
 	}
-	return f;
+	return NULL;
 }
 
 /*

fs/inode.c

@@ -109,7 +109,6 @@ static inline void init_once(struct inode * inode)
 {
 	memset(inode, 0, sizeof(*inode));
 	init_waitqueue(&inode->i_wait);
-	INIT_LIST_HEAD(&inode->i_dentry);
 	INIT_LIST_HEAD(&inode->i_hash);
 	sema_init(&inode->i_sem, 1);
 }

fs/msdos/namei.c

@@ -232,8 +232,11 @@ struct super_block *msdos_read_super(struct super_block *sb,void *data, int sile
 
 	sb->s_op = &msdos_sops;
 	res =  fat_read_super(sb, data, silent);
-	if (res == NULL)
+	if (res == NULL) {
+		sb->s_dev = 0;
 		MOD_DEC_USE_COUNT;
+		return NULL;
+	}
 	sb->s_root->d_op = &msdos_dentry_operations;
 	return res;
 }

fs/nfs/dir.c

@@ -7,6 +7,13 @@
  *
  * 10 Apr 1996	Added silly rename for unlink	--okir
  * 28 Sep 1996	Improved directory cache --okir
+ * 23 Aug 1997  Claus Heine claus@momo.math.rwth-aachen.de 
+ *              Re-implemented silly rename for unlink, newly implemented
+ *              silly rename for nfs_rename() following the suggestions
+ *              of Olaf Kirch (okir) found in this file.
+ *              Following Linus comments on my original hack, this version
+ *              depends only on the dcache stuff and doesn't touch the inode
+ *              layer (iput() and friends).
  */
 
 #include <linux/sched.h>
@@ -349,10 +356,13 @@ static int nfs_lookup_revalidate(struct dentry * dentry)
 	return time < max;
 }
 
+static void nfs_silly_delete(struct dentry *);
+
 static struct dentry_operations nfs_dentry_operations = {
 	nfs_lookup_revalidate,
 	0,			/* d_hash */
 	0,			/* d_compare */
+	nfs_silly_delete,
 };
 
 static int nfs_lookup(struct inode *dir, struct dentry * dentry)
@@ -378,7 +388,6 @@ static int nfs_lookup(struct inode *dir, struct dentry * dentry)
 
 	inode = NULL;
 	if (!error) {
-		error = -ENOENT;
 		inode = nfs_fhget(dir->i_sb, &fhandle, &fattr);
 		if (!inode)
 			return -EACCES;
@@ -530,9 +539,150 @@ static int nfs_rmdir(struct inode *dir, struct dentry *dentry)
 	return 0;
 }
 
-/*
- * We should do silly-rename here, but I'm too lazy to fix
- * up the directory entry implications of it..
+
+/*  Note: we copy the code from lookup_dentry() here, only: we have to
+ *  omit the directory lock. We are already the owner of the lock when
+ *  we reach here. And "down(&dir->i_sem)" would make us sleep forever
+ *  ('cause WE have the lock)
+ * 
+ *  VERY IMPORTANT: calculate the hash for this dentry!!!!!!!!
+ *  Otherwise the cached lookup DEFINITELY WILL fail. And a new dentry
+ *  is created. Without the DCACHE_NFSFS_RENAMED flag. And with d_count
+ *  == 1. And trouble.
+ *
+ *  Concerning my choice of the temp name: it is just nice to have
+ *  i_ino part of the temp name, as this offers another check whether
+ *  somebody attempts to remove the "silly renamed" dentry
+ *  itself. Which is something that I consider evil. Your opinion may
+ *  vary.
+ *  BUT:
+ *  Now that I compute the hash value right, it should be possible to simply
+ *  check for the DCACHE_NFSFS_RENAMED flag in dentry->d_flag instead of
+ *  doing the string compare.
+ *  WHICH MEANS:
+ *  This offers the opportunity to shorten the temp name. Currently, I use
+ *  the hex representation of i_ino + the hex value of jiffies. This
+ *  sums up to as much as 36 characters for a 64 bit machine, and needs
+ *  20 chars on a 32 bit machine. Have a look at jiffiesize etc.
+ *  QUINTESSENCE
+ *  The use of i_ino is simply cosmetic. All we need is a unique temp
+ *  file name for the .nfs files. The hex representation of "jiffies"
+ *  seemed to be adequate. And as we retry in case such a file already
+ *  exists we are guaranteed to succed (after some jiffies have passed
+ *  by :)
+ */
+
+static
+struct dentry *nfs_silly_lookup(struct dentry *parent, char *silly, int slen)
+{
+	struct qstr    sqstr;
+	struct dentry *sdentry;
+	int i, error;
+
+	sqstr.name = silly;
+	sqstr.len  = slen;
+	sqstr.hash = init_name_hash();
+	for (i= 0; i < slen; i++)
+		sqstr.hash = partial_name_hash(silly[i], sqstr.hash);
+	sqstr.hash = end_name_hash(sqstr.hash);
+	sdentry = d_lookup(parent, &sqstr);
+	if (!sdentry) {
+		sdentry = d_alloc(parent, &sqstr);
+		if (sdentry == NULL)
+			return ERR_PTR(-ENOMEM);
+		error = nfs_lookup(parent->d_inode, sdentry);
+		if (error) {
+			dput(sdentry);
+			return ERR_PTR(error);
+		}
+	}
+	return sdentry;
+}
+
+static int nfs_sillyrename(struct inode *dir, struct dentry *dentry)
+{
+	static unsigned int sillycounter = 0;
+	const int      i_inosize  = sizeof(dir->i_ino)*2;
+	const int      countersize = sizeof(sillycounter)*2;
+	const int      slen       = strlen(".nfs") + i_inosize + countersize;
+	char           silly[slen+1];
+	int            error;
+	struct dentry *sdentry;
+
+	if (dentry->d_count == 1) {
+		return -EIO;  /* No need to silly rename. */
+	}
+
+	if (dentry->d_flags & DCACHE_NFSFS_RENAMED) {
+		return -EBUSY; /* don't allow to unlink silly inode -- nope,
+				* think a bit: silly DENTRY, NOT inode --
+				* itself
+				*/
+	}
+
+	sprintf(silly, ".nfs%*.*lx",
+		i_inosize, i_inosize, dentry->d_inode->i_ino);
+
+	sdentry = NULL;
+	do {
+		char *suffix = silly + slen - countersize;
+
+		dput(sdentry);
+		sillycounter++;
+		sprintf(suffix, "%*.*x", countersize, countersize, sillycounter);
+
+		dfprintk(VFS, "trying to rename %s to %s\n",
+			 dentry->d_name.name, silly);
+		
+		sdentry = nfs_silly_lookup(dentry->d_parent, silly, slen);
+		if (IS_ERR(sdentry)) {
+			return -EIO; /* FIXME ? */
+		}		
+	} while(sdentry->d_inode != NULL); /* need negative lookup */
+
+	error = nfs_proc_rename(NFS_SERVER(dir),
+				NFS_FH(dir), dentry->d_name.name,
+				NFS_FH(dir), silly);
+	if (error) {
+		dput(sdentry);
+		return error;
+	}
+	nfs_invalidate_dircache(dir);
+	d_move(dentry, sdentry);
+	dput(sdentry);
+	dentry->d_flags |= DCACHE_NFSFS_RENAMED;
+
+	return 0; /* don't unlink */
+}
+
+static void nfs_silly_delete(struct dentry *dentry)
+{
+	if (dentry->d_flags & DCACHE_NFSFS_RENAMED) {
+		struct inode *dir = dentry->d_parent->d_inode;
+		int error;
+		
+		dentry->d_flags &= ~DCACHE_NFSFS_RENAMED;
+
+		/* Unhash it first */
+		d_drop(dentry);
+		dfprintk(VFS, "trying to unlink %s\n", dentry->d_name.name);
+		error = nfs_proc_remove(NFS_SERVER(dir),
+					NFS_FH(dir), dentry->d_name.name);
+		if (error < 0)
+			printk("NFS " __FUNCTION__ " failed (err = %d)\n",
+			       -error);
+		dentry->d_inode->i_nlink --;
+		nfs_invalidate_dircache(dir);
+	}
+}
+
+/*  We do silly rename. In case sillyrename() returns -EBUSY, the inode
+ *  belongs to an active ".nfs..." file and we return -EBUSY.
+ *
+ *  If sillyrename() returns 0, we do nothing, otherwise we unlink.
+ * 
+ *  inode->i_nlink is updated here rather than waiting for the next
+ *  nfs_refresh_inode() for cosmetic reasons only.
  */
 static int nfs_unlink(struct inode *dir, struct dentry *dentry)
 {
@@ -549,12 +699,21 @@ static int nfs_unlink(struct inode *dir, struct dentry *dentry)
 	if (dentry->d_name.len > NFS_MAXNAMLEN)
 		return -ENAMETOOLONG;
 
-	error = nfs_proc_remove(NFS_SERVER(dir), NFS_FH(dir), dentry->d_name.name);
-	if (error)
-		return error;
+	error = nfs_sillyrename(dir, dentry);
+
+	if (error == -EBUSY) {
+		return -EBUSY;
+	} else if (error < 0) {
+		error = nfs_proc_remove(NFS_SERVER(dir),
+					NFS_FH(dir), dentry->d_name.name);
+		if (error < 0)
+			return error;
+		
+		dentry->d_inode->i_nlink --;
+		nfs_invalidate_dircache(dir);
+		d_delete(dentry);
+	}
 
-	nfs_invalidate_dircache(dir);
-	d_delete(dentry);
 	return 0;
 }
 
@@ -588,7 +747,7 @@ static int nfs_symlink(struct inode *dir, struct dentry *dentry, const char *sym
 		return error;
 
 	nfs_invalidate_dircache(dir);
-	/*  this looks _funny_ doesn't it? But: nfs_proc_symlynk()
+	/*  this looks _funny_ doesn't it? But: nfs_proc_symlink()
 	 *  only fills in sattr, not fattr. Thus nfs_fhget() cannot be
 	 *  called, it would be pointless, without a valid fattr
 	 *  argument. Other possibility: call nfs_proc_lookup()
@@ -623,7 +782,8 @@ static int nfs_link(struct inode *inode, struct inode *dir, struct dentry *dentr
 		return error;
 
 	nfs_invalidate_dircache(dir);
-	inode->i_count++;
+	inode->i_count ++;
+	inode->i_nlink ++; /* no need to wait for nfs_refresh_inode() */
 	d_instantiate(dentry, inode);
 	return 0;
 }
@@ -634,8 +794,17 @@ static int nfs_link(struct inode *inode, struct inode *dir, struct dentry *dentr
  * different file handle for the same inode after a rename (e.g. when
  * moving to a different directory). A fail-safe method to do so would
  * be to look up old_dir/old_name, create a link to new_dir/new_name and
- * rename the old file using the silly_rename stuff. This way, the original
+ * rename the old file using the sillyrename stuff. This way, the original
  * file in old_dir will go away when the last process iput()s the inode.
+ *
+ * FIXED.
+ * 
+ * It actually works quite well. One needs to have the possibility for
+ * at least one ".nfs..." file in each directory the file ever gets
+ * moved or linked to which happens automagically with the new
+ * implementation that only depends on the dcache stuff instead of
+ * using the inode layer
+ *
  */
 static int nfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 		      struct inode *new_dir, struct dentry *new_dentry)
@@ -659,10 +828,22 @@ static int nfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	if (old_dentry->d_name.len > NFS_MAXNAMLEN || new_dentry->d_name.len > NFS_MAXNAMLEN)
 		return -ENAMETOOLONG;
 
-	error = nfs_proc_rename(NFS_SERVER(old_dir),
-		NFS_FH(old_dir), old_dentry->d_name.name,
-		NFS_FH(new_dir), new_dentry->d_name.name);
+	if (new_dir != old_dir) {
+		error = nfs_sillyrename(old_dir, old_dentry);
 
+		if (error == -EBUSY) {
+			return -EBUSY;
+		} else if (error == 0) { /* did silly rename stuff */
+			error = nfs_link(old_dentry->d_inode,
+					 new_dir, new_dentry);
+			
+			return error;
+		}
+		/* no need for silly rename, proceed as usual */
+	}
+	error = nfs_proc_rename(NFS_SERVER(old_dir),
+				NFS_FH(old_dir), old_dentry->d_name.name,
+				NFS_FH(new_dir), new_dentry->d_name.name);
 	if (error)
 		return error;
 
@@ -737,3 +918,10 @@ void nfs_refresh_inode(struct inode *inode, struct nfs_fattr *fattr)
 	} else
 		inode->i_op = NULL;
 }
+
+/*
+ * Local variables:
+ *  version-control: t
+ *  kept-new-versions: 5
+ * End:
+ */

fs/nfs/inode.c

@@ -77,10 +77,6 @@ nfs_put_inode(struct inode * inode)
 	dprintk("NFS: put_inode(%x/%ld)\n", inode->i_dev, inode->i_ino);
 }
 
-/*
- * This should do any silly-rename cleanups once we
- * get silly-renaming working again..
- */
 static void
 nfs_delete_inode(struct inode * inode)
 {
@@ -454,6 +450,8 @@ int
 init_nfs_fs(void)
 {
 #ifdef CONFIG_PROC_FS
+	rpc_register_sysctl();
+	rpc_proc_init();
 	rpc_proc_register(&nfs_rpcstat);
 #endif
         return register_filesystem(&nfs_fs_type);

fs/proc/array.c

@@ -295,14 +295,20 @@ static int get_uptime(char * buffer)
 static int get_meminfo(char * buffer)
 {
 	struct sysinfo i;
+	int len;
 
 	si_meminfo(&i);
 	si_swapinfo(&i);
-
+	len = sprintf(buffer, "        total:    used:    free:  shared: buffers:  cached:\n"
+		"Mem:  %8lu %8lu %8lu %8lu %8lu %8lu\n"
+		"Swap: %8lu %8lu %8lu\n",
+		i.totalram, i.totalram-i.freeram, i.freeram, i.sharedram, i.bufferram, page_cache_size*PAGE_SIZE,
+		i.totalswap, i.totalswap-i.freeswap, i.freeswap);
 	/*
-	 * Tagged format, for easy grepping and expansion.
+	 * Tagged format, for easy grepping and expansion. The above will go away
+	 * eventually, once the tools have been updated.
 	 */
-	return sprintf(buffer,
+	return len + sprintf(buffer+len,
 		"MemTotal:  %8lu kB\n"
 		"MemFree:   %8lu kB\n"
 		"MemShared: %8lu kB\n"

fs/select.c

@@ -423,7 +423,7 @@ asmlinkage int sys_poll(struct pollfd * ufds, unsigned int nfds, int timeout)
 	wait_table.nr = 0;
 	wait_table.entry = entry;
 
-	fdcount = do_poll(nfds, fds, &wait_table);
+	fdcount = do_poll(nfds, fds, timeout ? &wait_table : NULL);
 	current->timeout = 0;
 
 	free_wait(&wait_table);

include/asm-i386/string.h

@@ -23,7 +23,8 @@
  * set, making the functions fast and clean. String instructions have been
  * used through-out, making for "slightly" unclear code :-)
  *
- *		Copyright (C) 1991, 1992 Linus Torvalds
+ *		NO Copyright (C) 1991, 1992 Linus Torvalds,
+ *		consider these trivial functions to be PD.
  */
 
 #define __HAVE_ARCH_STRCPY