Merge tag 'ux500-dev-for-armsoc' of...

Merge tag 'ux500-dev-for-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/soc

Some two collected patches simplifying some Ux500
stuff.

* tag 'ux500-dev-for-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: remove duplicated include from cpu-db8500.c
  ARM: ux500: simplify secondary boot
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/mach-ux500/cpu-db8500.c

@@ -12,7 +12,6 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqchip.h>

arch/arm/mach-ux500/platsmp.c

@@ -31,10 +31,14 @@
 #define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
 #define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
 
-static void wakeup_secondary(void)
+static void __iomem *backupram;
+
+static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
 {
 	struct device_node *np;
-	static void __iomem *backupram;
+	static void __iomem *scu_base;
+	unsigned int ncores;
+	int i;
 
 	np = of_find_compatible_node(NULL, NULL, "ste,dbx500-backupram");
 	if (!np) {
@@ -48,29 +52,6 @@ static void wakeup_secondary(void)
 		return;
 	}
 
-	/*
-	 * write the address of secondary startup into the backup ram register
-	 * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
-	 * backup ram register at offset 0x1FF0, which is what boot rom code
-	 * is waiting for. This will wake up the secondary core from WFE.
-	 */
-	writel(virt_to_phys(secondary_startup),
-	       backupram + UX500_CPU1_JUMPADDR_OFFSET);
-	writel(0xA1FEED01,
-	       backupram + UX500_CPU1_WAKEMAGIC_OFFSET);
-
-	/* make sure write buffer is drained */
-	mb();
-	iounmap(backupram);
-}
-
-static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
-{
-	struct device_node *np;
-	static void __iomem *scu_base;
-	unsigned int ncores;
-	int i;
-
 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
 	if (!np) {
 		pr_err("No SCU base address\n");
@@ -92,7 +73,19 @@ static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
 
 static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	wakeup_secondary();
+	/*
+	 * write the address of secondary startup into the backup ram register
+	 * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
+	 * backup ram register at offset 0x1FF0, which is what boot rom code
+	 * is waiting for. This will wake up the secondary core from WFE.
+	 */
+	writel(virt_to_phys(secondary_startup),
+	       backupram + UX500_CPU1_JUMPADDR_OFFSET);
+	writel(0xA1FEED01,
+	       backupram + UX500_CPU1_WAKEMAGIC_OFFSET);
+
+	/* make sure write buffer is drained */
+	mb();
 	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 	return 0;
 }