[PATCH] fix black/white-only svideo input in vpx3220 decoder

Fix the fact that the svideo input will only give input in black/white in
some circumstances.  Reason is that in the PCI controller driver (zr36067),
after setting input, we reset norm, which overwrites the input register
with the default.  This patch makes it always set the correct value for the
input when changing norm.
Signed-off-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/media/video/vpx3220.c

@@ -408,6 +408,12 @@ vpx3220_command (struct i2c_client *client,
 	case DECODER_SET_NORM:
 	{
 		int *iarg = arg, data;
+		int temp_input;
+
+		/* Here we back up the input selection because it gets
+		   overwritten when we fill the registers with the
+                   choosen video norm */
+		temp_input = vpx3220_fp_read(client, 0xf2);
 
 		dprintk(1, KERN_DEBUG "%s: DECODER_SET_NORM %d\n",
 			I2C_NAME(client), *iarg);
@@ -447,6 +453,10 @@ vpx3220_command (struct i2c_client *client,
 
 		}
 		decoder->norm = *iarg;
+
+		/* And here we set the backed up video input again */
+		vpx3220_fp_write(client, 0xf2, temp_input | 0x0010);
+		udelay(10);
 	}
 		break;