Commit de9ae744 authored by Alex Deucher's avatar Alex Deucher

drm/radeon: implement pci config reset for r6xx/7xx (v3)

pci config reset is a low level reset that resets
the entire chip from the bus interface.  It can
be more reliable if soft reset fails.

There's not much information still available on
r6xx, so r6xx is based on guess-work.

v2: put behind module parameter
v3: add IGP check
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 1a0041b8
......@@ -105,6 +105,7 @@ void r600_fini(struct radeon_device *rdev);
void r600_irq_disable(struct radeon_device *rdev);
static void r600_pcie_gen2_enable(struct radeon_device *rdev);
extern int evergreen_rlc_resume(struct radeon_device *rdev);
extern void rv770_set_clk_bypass_mode(struct radeon_device *rdev);
/**
* r600_get_xclk - get the xclk
......@@ -1644,6 +1645,67 @@ static void r600_gpu_soft_reset(struct radeon_device *rdev, u32 reset_mask)
r600_print_gpu_status_regs(rdev);
}
static void r600_gpu_pci_config_reset(struct radeon_device *rdev)
{
struct rv515_mc_save save;
u32 tmp, i;
dev_info(rdev->dev, "GPU pci config reset\n");
/* disable dpm? */
/* Disable CP parsing/prefetching */
if (rdev->family >= CHIP_RV770)
WREG32(R_0086D8_CP_ME_CNTL, S_0086D8_CP_ME_HALT(1) | S_0086D8_CP_PFP_HALT(1));
else
WREG32(R_0086D8_CP_ME_CNTL, S_0086D8_CP_ME_HALT(1));
/* disable the RLC */
WREG32(RLC_CNTL, 0);
/* Disable DMA */
tmp = RREG32(DMA_RB_CNTL);
tmp &= ~DMA_RB_ENABLE;
WREG32(DMA_RB_CNTL, tmp);
mdelay(50);
/* set mclk/sclk to bypass */
if (rdev->family >= CHIP_RV770)
rv770_set_clk_bypass_mode(rdev);
/* disable BM */
pci_clear_master(rdev->pdev);
/* disable mem access */
rv515_mc_stop(rdev, &save);
if (r600_mc_wait_for_idle(rdev)) {
dev_warn(rdev->dev, "Wait for MC idle timedout !\n");
}
/* BIF reset workaround. Not sure if this is needed on 6xx */
tmp = RREG32(BUS_CNTL);
tmp |= VGA_COHE_SPEC_TIMER_DIS;
WREG32(BUS_CNTL, tmp);
tmp = RREG32(BIF_SCRATCH0);
/* reset */
radeon_pci_config_reset(rdev);
mdelay(1);
/* BIF reset workaround. Not sure if this is needed on 6xx */
tmp = SOFT_RESET_BIF;
WREG32(SRBM_SOFT_RESET, tmp);
mdelay(1);
WREG32(SRBM_SOFT_RESET, 0);
/* wait for asic to come out of reset */
for (i = 0; i < rdev->usec_timeout; i++) {
if (RREG32(CONFIG_MEMSIZE) != 0xffffffff)
break;
udelay(1);
}
}
int r600_asic_reset(struct radeon_device *rdev)
{
u32 reset_mask;
......@@ -1653,10 +1715,17 @@ int r600_asic_reset(struct radeon_device *rdev)
if (reset_mask)
r600_set_bios_scratch_engine_hung(rdev, true);
/* try soft reset */
r600_gpu_soft_reset(rdev, reset_mask);
reset_mask = r600_gpu_check_soft_reset(rdev);
/* try pci config reset */
if (reset_mask && radeon_hard_reset)
r600_gpu_pci_config_reset(rdev);
reset_mask = r600_gpu_check_soft_reset(rdev);
if (!reset_mask)
r600_set_bios_scratch_engine_hung(rdev, false);
......
......@@ -701,11 +701,18 @@
#define RLC_UCODE_DATA 0x3f30
#define SRBM_SOFT_RESET 0xe60
# define SOFT_RESET_BIF (1 << 1)
# define SOFT_RESET_DMA (1 << 12)
# define SOFT_RESET_RLC (1 << 13)
# define SOFT_RESET_UVD (1 << 18)
# define RV770_SOFT_RESET_DMA (1 << 20)
#define BIF_SCRATCH0 0x5438
#define BUS_CNTL 0x5420
# define BIOS_ROM_DIS (1 << 1)
# define VGA_COHE_SPEC_TIMER_DIS (1 << 9)
#define CP_INT_CNTL 0xc124
# define CNTX_BUSY_INT_ENABLE (1 << 19)
# define CNTX_EMPTY_INT_ENABLE (1 << 20)
......
......@@ -1123,6 +1123,35 @@ void r700_cp_fini(struct radeon_device *rdev)
radeon_scratch_free(rdev, ring->rptr_save_reg);
}
void rv770_set_clk_bypass_mode(struct radeon_device *rdev)
{
u32 tmp, i;
if (rdev->flags & RADEON_IS_IGP)
return;
tmp = RREG32(CG_SPLL_FUNC_CNTL_2);
tmp &= SCLK_MUX_SEL_MASK;
tmp |= SCLK_MUX_SEL(1) | SCLK_MUX_UPDATE;
WREG32(CG_SPLL_FUNC_CNTL_2, tmp);
for (i = 0; i < rdev->usec_timeout; i++) {
if (RREG32(CG_SPLL_STATUS) & SPLL_CHG_STATUS)
break;
udelay(1);
}
tmp &= ~SCLK_MUX_UPDATE;
WREG32(CG_SPLL_FUNC_CNTL_2, tmp);
tmp = RREG32(MPLL_CNTL_MODE);
if ((rdev->family == CHIP_RV710) || (rdev->family == CHIP_RV730))
tmp &= ~RV730_MPLL_MCLK_SEL;
else
tmp &= ~MPLL_MCLK_SEL;
WREG32(MPLL_CNTL_MODE, tmp);
}
/*
* Core functions
*/
......
......@@ -100,14 +100,21 @@
#define CG_SPLL_FUNC_CNTL_2 0x604
#define SCLK_MUX_SEL(x) ((x) << 0)
#define SCLK_MUX_SEL_MASK (0x1ff << 0)
#define SCLK_MUX_UPDATE (1 << 26)
#define CG_SPLL_FUNC_CNTL_3 0x608
#define SPLL_FB_DIV(x) ((x) << 0)
#define SPLL_FB_DIV_MASK (0x3ffffff << 0)
#define SPLL_DITHEN (1 << 28)
#define CG_SPLL_STATUS 0x60c
#define SPLL_CHG_STATUS (1 << 1)
#define SPLL_CNTL_MODE 0x610
#define SPLL_DIV_SYNC (1 << 5)
#define MPLL_CNTL_MODE 0x61c
# define MPLL_MCLK_SEL (1 << 11)
# define RV730_MPLL_MCLK_SEL (1 << 25)
#define MPLL_AD_FUNC_CNTL 0x624
#define CLKF(x) ((x) << 0)
#define CLKF_MASK (0x7f << 0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment