Commit dea05fe6 authored by Frank Li's avatar Frank Li Committed by Mark Brown

regulator: gpio-regulator: doc: Fix wrong key gpio-enable

Wrong description in binding document.
Doc use "gpio-enable", but code use "enable-gpio"

In drivers/regulator/gpio-regulator.c
	config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);
Signed-off-by: default avatarFrank Li <Frank.Li@freescale.com>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 006694d0
...@@ -4,7 +4,7 @@ Required properties: ...@@ -4,7 +4,7 @@ Required properties:
- compatible : Must be "regulator-gpio". - compatible : Must be "regulator-gpio".
Optional properties: Optional properties:
- gpio-enable : GPIO to use to enable/disable the regulator. - enable-gpio : GPIO to use to enable/disable the regulator.
- gpios : GPIO group used to control voltage. - gpios : GPIO group used to control voltage.
- states : Selection of available voltages and GPIO configs. - states : Selection of available voltages and GPIO configs.
- startup-delay-us : Startup time in microseconds. - startup-delay-us : Startup time in microseconds.
...@@ -23,7 +23,7 @@ Example: ...@@ -23,7 +23,7 @@ Example:
regulator-max-microvolt = <2600000>; regulator-max-microvolt = <2600000>;
regulator-boot-on; regulator-boot-on;
gpio-enable = <&gpio0 23 0x4>; enable-gpio = <&gpio0 23 0x4>;
gpios = <&gpio0 24 0x4 gpios = <&gpio0 24 0x4
&gpio0 25 0x4>; &gpio0 25 0x4>;
states = <1800000 0x3 states = <1800000 0x3
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment