Skip to content

L
linux
Commit dedca6ab authored by Mike Turquette's avatar Mike Turquette
Browse files
Options

Merge remote-tracking branch 'linaro/clk-next' into clk-next

parents 4b660a7f fb8abb7a
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 3389 additions and 813 deletions
Documentation/clk.txt
View file @ dedca6ab
......@@ -68,21 +68,27 @@ the operations defined in clk.h:
int (*is_enabled)(struct clk_hw *hw);
unsigned long (*recalc_rate)(struct clk_hw *hw,
unsigned long parent_rate);
long (*round_rate)(struct clk_hw *hw, unsigned long,
unsigned long *);
long (*round_rate)(struct clk_hw *hw,
unsigned long rate,
unsigned long *parent_rate);
long (*determine_rate)(struct clk_hw *hw,
unsigned long rate,
unsigned long *best_parent_rate,
struct clk **best_parent_clk);
int (*set_parent)(struct clk_hw *hw, u8 index);
u8 (*get_parent)(struct clk_hw *hw);
int (*set_rate)(struct clk_hw *hw, unsigned long);
int (*set_rate)(struct clk_hw *hw,
unsigned long rate,
unsigned long parent_rate);
int (*set_rate_and_parent)(struct clk_hw *hw,
unsigned long rate,
unsigned long parent_rate, u8 index);
unsigned long parent_rate,
u8 index);
unsigned long (*recalc_accuracy)(struct clk_hw *hw,
unsigned long parent_accuracy);
unsigned long parent_accuracy);
void (*init)(struct clk_hw *hw);
int (*debug_init)(struct clk_hw *hw,
struct dentry *dentry);
};
Part 3 - hardware clk implementations
......
Documentation/devicetree/bindings/clock/bcm-kona-clock.txt
View file @ dedca6ab
......@@ -10,12 +10,12 @@ This binding uses the common clock binding:
Required properties:
- compatible
Shall have one of the following values:
- "brcm,bcm11351-root-ccu"
- "brcm,bcm11351-aon-ccu"
- "brcm,bcm11351-hub-ccu"
- "brcm,bcm11351-master-ccu"
- "brcm,bcm11351-slave-ccu"
Shall have a value of the form "brcm,<model>-<which>-ccu",
where <model> is a Broadcom SoC model number and <which> is
the name of a defined CCU. For example:
"brcm,bcm11351-root-ccu"
The compatible strings used for each supported SoC family
are defined below.
- reg
Shall define the base and range of the address space
containing clock control registers
......@@ -26,12 +26,48 @@ Required properties:
Shall be an ordered list of strings defining the names of
the clocks provided by the CCU.
Device tree example:
slave_ccu: slave_ccu {
compatible = "brcm,bcm11351-slave-ccu";
reg = <0x3e011000 0x0f00>;
#clock-cells = <1>;
clock-output-names = "uartb",
"uartb2",
"uartb3",
"uartb4";
};
ref_crystal_clk: ref_crystal {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <26000000>;
};
uart@3e002000 {
compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
status = "disabled";
reg = <0x3e002000 0x1000>;
clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
};
BCM281XX family
---------------
CCU compatible string values for SoCs in the BCM281XX family are:
"brcm,bcm11351-root-ccu"
"brcm,bcm11351-aon-ccu"
"brcm,bcm11351-hub-ccu"
"brcm,bcm11351-master-ccu"
"brcm,bcm11351-slave-ccu"
BCM281XX family SoCs use Kona CCUs. The following table defines
the set of CCUs and clock specifiers for BCM281XX clocks. When
a clock consumer references a clocks, its symbolic specifier
(rather than its numeric index value) should be used. These
specifiers are defined in "include/dt-bindings/clock/bcm281xx.h".
The following table defines the set of CCUs and clock specifiers for
BCM281XX family clocks. When a clock consumer references a clocks,
its symbolic specifier (rather than its numeric index value) should
be used. These specifiers are defined in:
"include/dt-bindings/clock/bcm281xx.h"
CCU Clock Type Index Specifier
--- ----- ---- ----- ---------
......@@ -64,30 +100,40 @@ specifiers are defined in "include/dt-bindings/clock/bcm281xx.h".
slave pwm peri 9 BCM281XX_SLAVE_CCU_PWM
Device tree example:
BCM21664 family
---------------
CCU compatible string values for SoCs in the BCM21664 family are:
"brcm,bcm21664-root-ccu"
"brcm,bcm21664-aon-ccu"
"brcm,bcm21664-master-ccu"
"brcm,bcm21664-slave-ccu"
slave_ccu: slave_ccu {
compatible = "brcm,bcm11351-slave-ccu";
reg = <0x3e011000 0x0f00>;
#clock-cells = <1>;
clock-output-names = "uartb",
"uartb2",
"uartb3",
"uartb4";
};
The following table defines the set of CCUs and clock specifiers for
BCM21664 family clocks. When a clock consumer references a clocks,
its symbolic specifier (rather than its numeric index value) should
be used. These specifiers are defined in:
"include/dt-bindings/clock/bcm21664.h"
ref_crystal_clk: ref_crystal {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <26000000>;
};
CCU Clock Type Index Specifier
--- ----- ---- ----- ---------
root frac_1m peri 0 BCM21664_ROOT_CCU_FRAC_1M
uart@3e002000 {
compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
status = "disabled";
reg = <0x3e002000 0x1000>;
clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
};
aon hub_timer peri 0 BCM21664_AON_CCU_HUB_TIMER
master sdio1 peri 0 BCM21664_MASTER_CCU_SDIO1
master sdio2 peri 1 BCM21664_MASTER_CCU_SDIO2
master sdio3 peri 2 BCM21664_MASTER_CCU_SDIO3
master sdio4 peri 3 BCM21664_MASTER_CCU_SDIO4
master sdio1_sleep peri 4 BCM21664_MASTER_CCU_SDIO1_SLEEP
master sdio2_sleep peri 5 BCM21664_MASTER_CCU_SDIO2_SLEEP
master sdio3_sleep peri 6 BCM21664_MASTER_CCU_SDIO3_SLEEP
master sdio4_sleep peri 7 BCM21664_MASTER_CCU_SDIO4_SLEEP
slave uartb peri 0 BCM21664_SLAVE_CCU_UARTB
slave uartb2 peri 1 BCM21664_SLAVE_CCU_UARTB2
slave uartb3 peri 2 BCM21664_SLAVE_CCU_UARTB3
slave uartb4 peri 3 BCM21664_SLAVE_CCU_UARTB4
slave bsc1 peri 4 BCM21664_SLAVE_CCU_BSC1
slave bsc2 peri 5 BCM21664_SLAVE_CCU_BSC2
slave bsc3 peri 6 BCM21664_SLAVE_CCU_BSC3
slave bsc4 peri 7 BCM21664_SLAVE_CCU_BSC4
Documentation/devicetree/bindings/clock/clock-bindings.txt
View file @ dedca6ab
......@@ -44,10 +44,9 @@ For example:
clocks by index. The names should reflect the clock output signal
names for the device.
clock-indices: If the identifyng number for the clocks in the node
is not linear from zero, then the this mapping allows
the mapping of identifiers into the clock-output-names
array.
clock-indices: If the identifying number for the clocks in the node
is not linear from zero, then this allows the mapping of
identifiers into the clock-output-names array.
For example, if we have two clocks <&oscillator 1> and <&oscillator 3>:
......@@ -58,7 +57,7 @@ For example, if we have two clocks <&oscillator 1> and <&oscillator 3>:
clock-output-names = "clka", "clkb";
}
This ensures we do not have any empty nodes in clock-output-names
This ensures we do not have any empty strings in clock-output-names
==Clock consumers==
......
Documentation/devicetree/bindings/clock/fixed-clock.txt
View file @ dedca6ab
......@@ -12,7 +12,6 @@ Required properties:
Optional properties:
- clock-accuracy : accuracy of clock in ppb (parts per billion).
Should be a single cell.
- gpios : From common gpio binding; gpio connection to clock enable pin.
- clock-output-names : From common clock binding.
Example:
......
Documentation/devicetree/bindings/clock/hix5hd2-clock.txt 0 → 100644
View file @ dedca6ab
* Hisilicon Hix5hd2 Clock Controller
The hix5hd2 clock controller generates and supplies clock to various
controllers within the hix5hd2 SoC.
Required Properties:
- compatible: should be "hisilicon,hix5hd2-clock"
- reg: Address and length of the register set
- #clock-cells: Should be <1>
Each clock is assigned an identifier and client nodes use this identifier
to specify the clock which they consume.
All these identifier could be found in <dt-bindings/clock/hix5hd2-clock.h>.
Examples:
clock: clock@f8a22000 {
compatible = "hisilicon,hix5hd2-clock";
reg = <0xf8a22000 0x1000>;
#clock-cells = <1>;
};
uart0: uart@f8b00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xf8b00000 0x1000>;
interrupts = <0 49 4>;
clocks = <&clock HIX5HD2_FIXED_83M>;
clock-names = "apb_pclk";
status = "disabled";
};
Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt 0 → 100644
View file @ dedca6ab
AXM5516 clock driver bindings
-----------------------------
Required properties :
- compatible : shall contain "lsi,axm5516-clks"
- reg : shall contain base register location and length
- #clock-cells : shall contain 1
The consumer specifies the desired clock by having the clock ID in its "clocks"
phandle cell. See <dt-bindings/clock/lsi,axxia-clock.h> for the list of
supported clock IDs.
Example:
clks: clock-controller@2010020000 {
compatible = "lsi,axm5516-clks";
#clock-cells = <1>;
reg = <0x20 0x10020000 0 0x20000>;
};
serial0: uart@2010080000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x20 0x10080000 0 0x1000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks AXXIA_CLK_PER>;
clock-names = "apb_pclk";
};
};
Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
View file @ dedca6ab
......@@ -29,6 +29,11 @@ The following is a list of provided IDs and clock names on Kirkwood and Dove:
2 = l2clk (L2 Cache clock derived from CPU0 clock)
3 = ddrclk (DDR controller clock derived from CPU0 clock)
The following is a list of provided IDs and clock names on Orion5x:
0 = tclk (Internal Bus clock)
1 = cpuclk (CPU0 clock)
2 = ddrclk (DDR controller clock derived from CPU0 clock)
Required properties:
- compatible : shall be one of the following:
"marvell,armada-370-core-clock" - For Armada 370 SoC core clocks
......@@ -38,6 +43,9 @@ Required properties:
"marvell,dove-core-clock" - for Dove SoC core clocks
"marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
"marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC
"marvell,mv88f5182-core-clock" - for Orion MV88F5182 SoC
"marvell,mv88f5281-core-clock" - for Orion MV88F5281 SoC
"marvell,mv88f6183-core-clock" - for Orion MV88F6183 SoC
- reg : shall be the register address of the Sample-At-Reset (SAR) register
- #clock-cells : from common clock binding; shall be set to 1
......
Documentation/devicetree/bindings/clock/qcom,gcc.txt
View file @ dedca6ab
......@@ -4,6 +4,7 @@ Qualcomm Global Clock & Reset Controller Binding
Required properties :
- compatible : shall contain only one of the following:
"qcom,gcc-apq8064"
"qcom,gcc-msm8660"
"qcom,gcc-msm8960"
"qcom,gcc-msm8974"
......
Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
View file @ dedca6ab
......@@ -10,6 +10,7 @@ index in the group, from 0 to 31.
Required Properties:
- compatible: Must be one of the following
- "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks
- "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
- "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks
- "renesas,cpg-mstp-clock" for generic MSTP gate clocks
......
Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt 0 → 100644
View file @ dedca6ab
These bindings should be considered EXPERIMENTAL for now.
* Renesas R8A7740 Clock Pulse Generator (CPG)
The CPG generates core clocks for the R8A7740 SoC. It includes three PLLs
and several fixed ratio and variable ratio dividers.
Required Properties:
- compatible: Must be "renesas,r8a7740-cpg-clocks"
- reg: Base address and length of the memory resource used by the CPG
- clocks: Reference to the three parent clocks
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are
"system", "pllc0", "pllc1", "pllc2", "r", "usb24s", "i", "zg", "b",
"m1", "hp", "hpp", "usbp", "s", "zb", "m3", and "cp".
- renesas,mode: board-specific settings of the MD_CK* bits
Example
-------
cpg_clocks: cpg_clocks@e6150000 {
compatible = "renesas,r8a7740-cpg-clocks";
reg = <0xe6150000 0x10000>;
clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
#clock-cells = <1>;
clock-output-names = "system", "pllc0", "pllc1",
"pllc2", "r",
"usb24s",
"i", "zg", "b", "m1", "hp",
"hpp", "usbp", "s", "zb", "m3",
"cp";
};
&cpg_clocks {
renesas,mode = <0x05>;
};
Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt 0 → 100644
View file @ dedca6ab
* Renesas R8A7779 Clock Pulse Generator (CPG)
The CPG generates core clocks for the R8A7779. It includes one PLL and
several fixed ratio dividers
Required Properties:
- compatible: Must be "renesas,r8a7779-cpg-clocks"
- reg: Base address and length of the memory resource used by the CPG
- clocks: Reference to the parent clock
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are "plla",
"z", "zs", "s", "s1", "p", "b", "out".
Example
-------
cpg_clocks: cpg_clocks@ffc80000 {
compatible = "renesas,r8a7779-cpg-clocks";
reg = <0 0xffc80000 0 0x30>;
clocks = <&extal_clk>;
#clock-cells = <1>;
clock-output-names = "plla", "z", "zs", "s", "s1", "p",
"b", "out";
};
arch/arm/boot/dts/bcm21664.dtsi
View file @ dedca6ab
......@@ -14,6 +14,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "dt-bindings/clock/bcm21664.h"
#include "skeleton.dtsi"
/ {
......@@ -43,7 +45,7 @@ uart@3e000000 {
compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
status = "disabled";
reg = <0x3e000000 0x118>;
clocks = <&uartb_clk>;
clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
......@@ -53,7 +55,7 @@ uart@3e001000 {
compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
status = "disabled";
reg = <0x3e001000 0x118>;
clocks = <&uartb2_clk>;
clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
......@@ -63,7 +65,7 @@ uart@3e002000 {
compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
status = "disabled";
reg = <0x3e002000 0x118>;
clocks = <&uartb3_clk>;
clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
......@@ -85,7 +87,7 @@ timer@35006000 {
compatible = "brcm,kona-timer";
reg = <0x35006000 0x1c>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hub_timer_clk>;
clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
};
gpio: gpio@35003000 {
......@@ -106,7 +108,7 @@ sdio1: sdio@3f180000 {
compatible = "brcm,kona-sdhci";
reg = <0x3f180000 0x801c>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sdio1_clk>;
clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
status = "disabled";
};
......@@ -114,7 +116,7 @@ sdio2: sdio@3f190000 {
compatible = "brcm,kona-sdhci";
reg = <0x3f190000 0x801c>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sdio2_clk>;
clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
status = "disabled";
};
......@@ -122,7 +124,7 @@ sdio3: sdio@3f1a0000 {
compatible = "brcm,kona-sdhci";
reg = <0x3f1a0000 0x801c>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sdio3_clk>;
clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
status = "disabled";
};
......@@ -130,7 +132,7 @@ sdio4: sdio@3f1b0000 {
compatible = "brcm,kona-sdhci";
reg = <0x3f1b0000 0x801c>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sdio4_clk>;
clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
status = "disabled";
};
......@@ -140,7 +142,7 @@ i2c@3e016000 {
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&bsc1_clk>;
clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
status = "disabled";
};
......@@ -150,7 +152,7 @@ i2c@3e017000 {
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&bsc2_clk>;
clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
status = "disabled";
};
......@@ -160,7 +162,7 @@ i2c@3e018000 {
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&bsc3_clk>;
clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
status = "disabled";
};
......@@ -170,105 +172,149 @@ i2c@3e01c000 {
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&bsc4_clk>;
clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
status = "disabled";
};
clocks {
bsc1_clk: bsc1 {
compatible = "fixed-clock";
clock-frequency = <13000000>;
#clock-cells = <0>;
};
#address-cells = <1>;
#size-cells = <1>;
ranges;
bsc2_clk: bsc2 {
compatible = "fixed-clock";
clock-frequency = <13000000>;
/*
* Fixed clocks are defined before CCUs whose
* clocks may depend on them.
*/
ref_32k_clk: ref_32k {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
};
bsc3_clk: bsc3 {
compatible = "fixed-clock";
clock-frequency = <13000000>;
bbl_32k_clk: bbl_32k {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
};
bsc4_clk: bsc4 {
ref_13m_clk: ref_13m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <13000000>;
#clock-cells = <0>;
};
pmu_bsc_clk: pmu_bsc {
var_13m_clk: var_13m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <13000000>;
#clock-cells = <0>;
};
hub_timer_clk: hub_timer {
compatible = "fixed-clock";
clock-frequency = <32768>;
dft_19_5m_clk: dft_19_5m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <19500000>;
};
pwm_clk: pwm {
ref_crystal_clk: ref_crystal {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <26000000>;
#clock-cells = <0>;
};
sdio1_clk: sdio1 {
compatible = "fixed-clock";
clock-frequency = <48000000>;
ref_52m_clk: ref_52m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <52000000>;
};
sdio2_clk: sdio2 {
compatible = "fixed-clock";
clock-frequency = <48000000>;
var_52m_clk: var_52m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <52000000>;
};
sdio3_clk: sdio3 {
compatible = "fixed-clock";
clock-frequency = <48000000>;
usb_otg_ahb_clk: usb_otg_ahb {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <52000000>;
};
sdio4_clk: sdio4 {
compatible = "fixed-clock";
clock-frequency = <48000000>;
ref_96m_clk: ref_96m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <96000000>;
};
tmon_1m_clk: tmon_1m {
compatible = "fixed-clock";
clock-frequency = <1000000>;
var_96m_clk: var_96m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <96000000>;
};
uartb_clk: uartb {
compatible = "fixed-clock";
clock-frequency = <13000000>;
ref_104m_clk: ref_104m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <104000000>;
};
uartb2_clk: uartb2 {
compatible = "fixed-clock";
clock-frequency = <13000000>;
var_104m_clk: var_104m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <104000000>;
};
uartb3_clk: uartb3 {
compatible = "fixed-clock";
clock-frequency = <13000000>;
ref_156m_clk: ref_156m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <156000000>;
};
usb_otg_ahb_clk: usb_otg_ahb {
compatible = "fixed-clock";
clock-frequency = <52000000>;
var_156m_clk: var_156m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <156000000>;
};
root_ccu: root_ccu {
compatible = BCM21664_DT_ROOT_CCU_COMPAT;
reg = <0x35001000 0x0f00>;
#clock-cells = <1>;
clock-output-names = "frac_1m";
};
aon_ccu: aon_ccu {
compatible = BCM21664_DT_AON_CCU_COMPAT;
reg = <0x35002000 0x0f00>;
#clock-cells = <1>;
clock-output-names = "hub_timer";
};
master_ccu: master_ccu {
compatible = BCM21664_DT_MASTER_CCU_COMPAT;
reg = <0x3f001000 0x0f00>;
#clock-cells = <1>;
clock-output-names = "sdio1",
"sdio2",
"sdio3",
"sdio4",
"sdio1_sleep",
"sdio2_sleep",
"sdio3_sleep",
"sdio4_sleep";
};
slave_ccu: slave_ccu {
compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
reg = <0x3e011000 0x0f00>;
#clock-cells = <1>;
clock-output-names = "uartb",
"uartb2",
"uartb3",
"bsc1",
"bsc2",
"bsc3",
"bsc4";
};
};
......
drivers/clk/Makefile
View file @ dedca6ab
......@@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK) += clk-composite.o
# hardware specific clock types
# please keep this section sorted lexicographically by file/directory path name
obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
obj-$(CONFIG_ARCH_AXXIA) += clk-axm5516.o
obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o
obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
......@@ -33,6 +34,7 @@ obj-$(CONFIG_COMMON_CLK_AT91) += at91/
obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm/
obj-$(CONFIG_ARCH_HI3xxx) += hisilicon/
obj-$(CONFIG_ARCH_HIP04) += hisilicon/
obj-$(CONFIG_ARCH_HIX5HD2) += hisilicon/
obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/
ifeq ($(CONFIG_COMMON_CLK), y)
obj-$(CONFIG_ARCH_MMP) += mmp/
......
drivers/clk/bcm/Kconfig
View file @ dedca6ab
......@@ -6,4 +6,4 @@ config CLK_BCM_KONA
help
Enable common clock framework support for Broadcom SoCs
using "Kona" style clock control units, including those
in the BCM281xx family.
in the BCM281xx and BCM21664 families.
drivers/clk/bcm/Makefile
View file @ dedca6ab
obj-$(CONFIG_CLK_BCM_KONA) += clk-kona.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o
drivers/clk/bcm/clk-bcm21664.c 0 → 100644
View file @ dedca6ab
/*
* Copyright (C) 2014 Broadcom Corporation
* Copyright 2014 Linaro Limited
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "clk-kona.h"
#include "dt-bindings/clock/bcm21664.h"
#define BCM21664_CCU_COMMON(_name, _capname) \
KONA_CCU_COMMON(BCM21664, _name, _capname)
/* Root CCU */
static struct peri_clk_data frac_1m_data = {
.gate = HW_SW_GATE(0x214, 16, 0, 1),
.clocks = CLOCKS("ref_crystal"),
};
static struct ccu_data root_ccu_data = {
BCM21664_CCU_COMMON(root, ROOT),
/* no policy control */
.kona_clks = {
[BCM21664_ROOT_CCU_FRAC_1M] =
KONA_CLK(root, frac_1m, peri),
[BCM21664_ROOT_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
},
};
/* AON CCU */
static struct peri_clk_data hub_timer_data = {
.gate = HW_SW_GATE(0x0414, 16, 0, 1),
.hyst = HYST(0x0414, 8, 9),
.clocks = CLOCKS("bbl_32k",
"frac_1m",
"dft_19_5m"),
.sel = SELECTOR(0x0a10, 0, 2),
.trig = TRIGGER(0x0a40, 4),
};
static struct ccu_data aon_ccu_data = {
BCM21664_CCU_COMMON(aon, AON),
.policy = {
.enable = CCU_LVM_EN(0x0034, 0),
.control = CCU_POLICY_CTL(0x000c, 0, 1, 2),
},
.kona_clks = {
[BCM21664_AON_CCU_HUB_TIMER] =
KONA_CLK(aon, hub_timer, peri),
[BCM21664_AON_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
},
};
/* Master CCU */
static struct peri_clk_data sdio1_data = {
.gate = HW_SW_GATE(0x0358, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_52m",
"ref_52m",
"var_96m",
"ref_96m"),
.sel = SELECTOR(0x0a28, 0, 3),
.div = DIVIDER(0x0a28, 4, 14),
.trig = TRIGGER(0x0afc, 9),
};
static struct peri_clk_data sdio2_data = {
.gate = HW_SW_GATE(0x035c, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_52m",
"ref_52m",
"var_96m",
"ref_96m"),
.sel = SELECTOR(0x0a2c, 0, 3),
.div = DIVIDER(0x0a2c, 4, 14),
.trig = TRIGGER(0x0afc, 10),
};
static struct peri_clk_data sdio3_data = {
.gate = HW_SW_GATE(0x0364, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_52m",
"ref_52m",
"var_96m",
"ref_96m"),
.sel = SELECTOR(0x0a34, 0, 3),
.div = DIVIDER(0x0a34, 4, 14),
.trig = TRIGGER(0x0afc, 12),
};
static struct peri_clk_data sdio4_data = {
.gate = HW_SW_GATE(0x0360, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_52m",
"ref_52m",
"var_96m",
"ref_96m"),
.sel = SELECTOR(0x0a30, 0, 3),
.div = DIVIDER(0x0a30, 4, 14),
.trig = TRIGGER(0x0afc, 11),
};
static struct peri_clk_data sdio1_sleep_data = {
.clocks = CLOCKS("ref_32k"), /* Verify */
.gate = HW_SW_GATE(0x0358, 18, 2, 3),
};
static struct peri_clk_data sdio2_sleep_data = {
.clocks = CLOCKS("ref_32k"), /* Verify */
.gate = HW_SW_GATE(0x035c, 18, 2, 3),
};
static struct peri_clk_data sdio3_sleep_data = {
.clocks = CLOCKS("ref_32k"), /* Verify */
.gate = HW_SW_GATE(0x0364, 18, 2, 3),
};
static struct peri_clk_data sdio4_sleep_data = {
.clocks = CLOCKS("ref_32k"), /* Verify */
.gate = HW_SW_GATE(0x0360, 18, 2, 3),
};
static struct ccu_data master_ccu_data = {
BCM21664_CCU_COMMON(master, MASTER),
.policy = {
.enable = CCU_LVM_EN(0x0034, 0),
.control = CCU_POLICY_CTL(0x000c, 0, 1, 2),
},
.kona_clks = {
[BCM21664_MASTER_CCU_SDIO1] =
KONA_CLK(master, sdio1, peri),
[BCM21664_MASTER_CCU_SDIO2] =
KONA_CLK(master, sdio2, peri),
[BCM21664_MASTER_CCU_SDIO3] =
KONA_CLK(master, sdio3, peri),
[BCM21664_MASTER_CCU_SDIO4] =
KONA_CLK(master, sdio4, peri),
[BCM21664_MASTER_CCU_SDIO1_SLEEP] =
KONA_CLK(master, sdio1_sleep, peri),
[BCM21664_MASTER_CCU_SDIO2_SLEEP] =
KONA_CLK(master, sdio2_sleep, peri),
[BCM21664_MASTER_CCU_SDIO3_SLEEP] =
KONA_CLK(master, sdio3_sleep, peri),
[BCM21664_MASTER_CCU_SDIO4_SLEEP] =
KONA_CLK(master, sdio4_sleep, peri),
[BCM21664_MASTER_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
},
};
/* Slave CCU */
static struct peri_clk_data uartb_data = {
.gate = HW_SW_GATE(0x0400, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_156m",
"ref_156m"),
.sel = SELECTOR(0x0a10, 0, 2),
.div = FRAC_DIVIDER(0x0a10, 4, 12, 8),
.trig = TRIGGER(0x0afc, 2),
};
static struct peri_clk_data uartb2_data = {
.gate = HW_SW_GATE(0x0404, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_156m",
"ref_156m"),
.sel = SELECTOR(0x0a14, 0, 2),
.div = FRAC_DIVIDER(0x0a14, 4, 12, 8),
.trig = TRIGGER(0x0afc, 3),
};
static struct peri_clk_data uartb3_data = {
.gate = HW_SW_GATE(0x0408, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_156m",
"ref_156m"),
.sel = SELECTOR(0x0a18, 0, 2),
.div = FRAC_DIVIDER(0x0a18, 4, 12, 8),
.trig = TRIGGER(0x0afc, 4),
};
static struct peri_clk_data bsc1_data = {
.gate = HW_SW_GATE(0x0458, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_104m",
"ref_104m",
"var_13m",
"ref_13m"),
.sel = SELECTOR(0x0a64, 0, 3),
.trig = TRIGGER(0x0afc, 23),
};
static struct peri_clk_data bsc2_data = {
.gate = HW_SW_GATE(0x045c, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_104m",
"ref_104m",
"var_13m",
"ref_13m"),
.sel = SELECTOR(0x0a68, 0, 3),
.trig = TRIGGER(0x0afc, 24),
};
static struct peri_clk_data bsc3_data = {
.gate = HW_SW_GATE(0x0470, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_104m",
"ref_104m",
"var_13m",
"ref_13m"),
.sel = SELECTOR(0x0a7c, 0, 3),
.trig = TRIGGER(0x0afc, 18),
};
static struct peri_clk_data bsc4_data = {
.gate = HW_SW_GATE(0x0474, 18, 2, 3),
.clocks = CLOCKS("ref_crystal",
"var_104m",
"ref_104m",
"var_13m",
"ref_13m"),
.sel = SELECTOR(0x0a80, 0, 3),
.trig = TRIGGER(0x0afc, 19),
};
static struct ccu_data slave_ccu_data = {
BCM21664_CCU_COMMON(slave, SLAVE),
.policy = {
.enable = CCU_LVM_EN(0x0034, 0),
.control = CCU_POLICY_CTL(0x000c, 0, 1, 2),
},
.kona_clks = {
[BCM21664_SLAVE_CCU_UARTB] =
KONA_CLK(slave, uartb, peri),
[BCM21664_SLAVE_CCU_UARTB2] =
KONA_CLK(slave, uartb2, peri),
[BCM21664_SLAVE_CCU_UARTB3] =
KONA_CLK(slave, uartb3, peri),
[BCM21664_SLAVE_CCU_BSC1] =
KONA_CLK(slave, bsc1, peri),
[BCM21664_SLAVE_CCU_BSC2] =
KONA_CLK(slave, bsc2, peri),
[BCM21664_SLAVE_CCU_BSC3] =
KONA_CLK(slave, bsc3, peri),
[BCM21664_SLAVE_CCU_BSC4] =
KONA_CLK(slave, bsc4, peri),
[BCM21664_SLAVE_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
},
};
/* Device tree match table callback functions */
static void __init kona_dt_root_ccu_setup(struct device_node *node)
{
kona_dt_ccu_setup(&root_ccu_data, node);
}
static void __init kona_dt_aon_ccu_setup(struct device_node *node)
{
kona_dt_ccu_setup(&aon_ccu_data, node);
}
static void __init kona_dt_master_ccu_setup(struct device_node *node)
{
kona_dt_ccu_setup(&master_ccu_data, node);
}
static void __init kona_dt_slave_ccu_setup(struct device_node *node)
{
kona_dt_ccu_setup(&slave_ccu_data, node);
}
CLK_OF_DECLARE(bcm21664_root_ccu, BCM21664_DT_ROOT_CCU_COMPAT,
kona_dt_root_ccu_setup);
CLK_OF_DECLARE(bcm21664_aon_ccu, BCM21664_DT_AON_CCU_COMPAT,
kona_dt_aon_ccu_setup);
CLK_OF_DECLARE(bcm21664_master_ccu, BCM21664_DT_MASTER_CCU_COMPAT,
kona_dt_master_ccu_setup);
CLK_OF_DECLARE(bcm21664_slave_ccu, BCM21664_DT_SLAVE_CCU_COMPAT,
kona_dt_slave_ccu_setup);
drivers/clk/bcm/clk-bcm281xx.c
View file @ dedca6ab
......@@ -15,14 +15,10 @@
#include "clk-kona.h"
#include "dt-bindings/clock/bcm281xx.h"
/* bcm11351 CCU device tree "compatible" strings */
#define BCM11351_DT_ROOT_CCU_COMPAT "brcm,bcm11351-root-ccu"
#define BCM11351_DT_AON_CCU_COMPAT "brcm,bcm11351-aon-ccu"
#define BCM11351_DT_HUB_CCU_COMPAT "brcm,bcm11351-hub-ccu"
#define BCM11351_DT_MASTER_CCU_COMPAT "brcm,bcm11351-master-ccu"
#define BCM11351_DT_SLAVE_CCU_COMPAT "brcm,bcm11351-slave-ccu"
#define BCM281XX_CCU_COMMON(_name, _ucase_name) \
KONA_CCU_COMMON(BCM281XX, _name, _ucase_name)
/* Root CCU clocks */
/* Root CCU */
static struct peri_clk_data frac_1m_data = {
.gate = HW_SW_GATE(0x214, 16, 0, 1),
......@@ -31,7 +27,16 @@ static struct peri_clk_data frac_1m_data = {
.clocks = CLOCKS("ref_crystal"),
};
/* AON CCU clocks */
static struct ccu_data root_ccu_data = {
BCM281XX_CCU_COMMON(root, ROOT),
.kona_clks = {
[BCM281XX_ROOT_CCU_FRAC_1M] =
KONA_CLK(root, frac_1m, peri),
[BCM281XX_ROOT_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
},
};
/* AON CCU */
static struct peri_clk_data hub_timer_data = {
.gate = HW_SW_GATE(0x0414, 16, 0, 1),
......@@ -60,7 +65,20 @@ static struct peri_clk_data pmu_bsc_var_data = {
.trig = TRIGGER(0x0a40, 2),
};
/* Hub CCU clocks */
static struct ccu_data aon_ccu_data = {
BCM281XX_CCU_COMMON(aon, AON),
.kona_clks = {
[BCM281XX_AON_CCU_HUB_TIMER] =
KONA_CLK(aon, hub_timer, peri),
[BCM281XX_AON_CCU_PMU_BSC] =
KONA_CLK(aon, pmu_bsc, peri),
[BCM281XX_AON_CCU_PMU_BSC_VAR] =
KONA_CLK(aon, pmu_bsc_var, peri),
[BCM281XX_AON_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
},
};
/* Hub CCU */
static struct peri_clk_data tmon_1m_data = {
.gate = HW_SW_GATE(0x04a4, 18, 2, 3),
......@@ -70,7 +88,16 @@ static struct peri_clk_data tmon_1m_data = {
.trig = TRIGGER(0x0e84, 1),
};
/* Master CCU clocks */
static struct ccu_data hub_ccu_data = {
BCM281XX_CCU_COMMON(hub, HUB),
.kona_clks = {
[BCM281XX_HUB_CCU_TMON_1M] =
KONA_CLK(hub, tmon_1m, peri),
[BCM281XX_HUB_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
},
};
/* Master CCU */
static struct peri_clk_data sdio1_data = {
.gate = HW_SW_GATE(0x0358, 18, 2, 3),
......@@ -153,7 +180,28 @@ static struct peri_clk_data hsic2_12m_data = {
.trig = TRIGGER(0x0afc, 5),
};
/* Slave CCU clocks */
static struct ccu_data master_ccu_data = {
BCM281XX_CCU_COMMON(master, MASTER),
.kona_clks = {
[BCM281XX_MASTER_CCU_SDIO1] =
KONA_CLK(master, sdio1, peri),
[BCM281XX_MASTER_CCU_SDIO2] =
KONA_CLK(master, sdio2, peri),
[BCM281XX_MASTER_CCU_SDIO3] =
KONA_CLK(master, sdio3, peri),
[BCM281XX_MASTER_CCU_SDIO4] =
KONA_CLK(master, sdio4, peri),
[BCM281XX_MASTER_CCU_USB_IC] =
KONA_CLK(master, usb_ic, peri),
[BCM281XX_MASTER_CCU_HSIC2_48M] =
KONA_CLK(master, hsic2_48m, peri),
[BCM281XX_MASTER_CCU_HSIC2_12M] =
KONA_CLK(master, hsic2_12m, peri),
[BCM281XX_MASTER_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
},
};
/* Slave CCU */
static struct peri_clk_data uartb_data = {
.gate = HW_SW_GATE(0x0400, 18, 2, 3),
......@@ -261,156 +309,67 @@ static struct peri_clk_data pwm_data = {
.trig = TRIGGER(0x0afc, 15),
};
/*
* CCU setup routines
*
* These are called from kona_dt_ccu_setup() to initialize the array
* of clocks provided by the CCU. Once allocated, the entries in
* the array are initialized by calling kona_clk_setup() with the
* initialization data for each clock. They return 0 if successful
* or an error code otherwise.
*/
static int __init bcm281xx_root_ccu_clks_setup(struct ccu_data *ccu)
{
struct clk **clks;
size_t count = BCM281XX_ROOT_CCU_CLOCK_COUNT;
clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
if (!clks) {
pr_err("%s: failed to allocate root clocks\n", __func__);
return -ENOMEM;
}
ccu->data.clks = clks;
ccu->data.clk_num = count;
PERI_CLK_SETUP(clks, ccu, BCM281XX_ROOT_CCU_FRAC_1M, frac_1m);
return 0;
}
static int __init bcm281xx_aon_ccu_clks_setup(struct ccu_data *ccu)
{
struct clk **clks;
size_t count = BCM281XX_AON_CCU_CLOCK_COUNT;
clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
if (!clks) {
pr_err("%s: failed to allocate aon clocks\n", __func__);
return -ENOMEM;
}
ccu->data.clks = clks;
ccu->data.clk_num = count;
PERI_CLK_SETUP(clks, ccu, BCM281XX_AON_CCU_HUB_TIMER, hub_timer);
PERI_CLK_SETUP(clks, ccu, BCM281XX_AON_CCU_PMU_BSC, pmu_bsc);
PERI_CLK_SETUP(clks, ccu, BCM281XX_AON_CCU_PMU_BSC_VAR, pmu_bsc_var);
return 0;
}
static int __init bcm281xx_hub_ccu_clks_setup(struct ccu_data *ccu)
{
struct clk **clks;
size_t count = BCM281XX_HUB_CCU_CLOCK_COUNT;
clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
if (!clks) {
pr_err("%s: failed to allocate hub clocks\n", __func__);
return -ENOMEM;
}
ccu->data.clks = clks;
ccu->data.clk_num = count;
PERI_CLK_SETUP(clks, ccu, BCM281XX_HUB_CCU_TMON_1M, tmon_1m);
return 0;
}
static int __init bcm281xx_master_ccu_clks_setup(struct ccu_data *ccu)
{
struct clk **clks;
size_t count = BCM281XX_MASTER_CCU_CLOCK_COUNT;
clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
if (!clks) {
pr_err("%s: failed to allocate master clocks\n", __func__);
return -ENOMEM;
}
ccu->data.clks = clks;
ccu->data.clk_num = count;
PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO1, sdio1);
PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO2, sdio2);
PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO3, sdio3);
PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO4, sdio4);
PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_USB_IC, usb_ic);
PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_HSIC2_48M, hsic2_48m);
PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_HSIC2_12M, hsic2_12m);
return 0;
}
static int __init bcm281xx_slave_ccu_clks_setup(struct ccu_data *ccu)
{
struct clk **clks;
size_t count = BCM281XX_SLAVE_CCU_CLOCK_COUNT;
clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
if (!clks) {
pr_err("%s: failed to allocate slave clocks\n", __func__);
return -ENOMEM;
}
ccu->data.clks = clks;
ccu->data.clk_num = count;
PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB, uartb);
PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB2, uartb2);
PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB3, uartb3);
PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB4, uartb4);
PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_SSP0, ssp0);
PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_SSP2, ssp2);
PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_BSC1, bsc1);
PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_BSC2, bsc2);
PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_BSC3, bsc3);
PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_PWM, pwm);
return 0;
}
static struct ccu_data slave_ccu_data = {
BCM281XX_CCU_COMMON(slave, SLAVE),
.kona_clks = {
[BCM281XX_SLAVE_CCU_UARTB] =
KONA_CLK(slave, uartb, peri),
[BCM281XX_SLAVE_CCU_UARTB2] =
KONA_CLK(slave, uartb2, peri),
[BCM281XX_SLAVE_CCU_UARTB3] =
KONA_CLK(slave, uartb3, peri),
[BCM281XX_SLAVE_CCU_UARTB4] =
KONA_CLK(slave, uartb4, peri),
[BCM281XX_SLAVE_CCU_SSP0] =
KONA_CLK(slave, ssp0, peri),
[BCM281XX_SLAVE_CCU_SSP2] =
KONA_CLK(slave, ssp2, peri),
[BCM281XX_SLAVE_CCU_BSC1] =
KONA_CLK(slave, bsc1, peri),
[BCM281XX_SLAVE_CCU_BSC2] =
KONA_CLK(slave, bsc2, peri),
[BCM281XX_SLAVE_CCU_BSC3] =
KONA_CLK(slave, bsc3, peri),
[BCM281XX_SLAVE_CCU_PWM] =
KONA_CLK(slave, pwm, peri),
[BCM281XX_SLAVE_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
},
};
/* Device tree match table callback functions */
static void __init kona_dt_root_ccu_setup(struct device_node *node)
{
kona_dt_ccu_setup(node, bcm281xx_root_ccu_clks_setup);
kona_dt_ccu_setup(&root_ccu_data, node);
}
static void __init kona_dt_aon_ccu_setup(struct device_node *node)
{
kona_dt_ccu_setup(node, bcm281xx_aon_ccu_clks_setup);
kona_dt_ccu_setup(&aon_ccu_data, node);
}
static void __init kona_dt_hub_ccu_setup(struct device_node *node)
{
kona_dt_ccu_setup(node, bcm281xx_hub_ccu_clks_setup);
kona_dt_ccu_setup(&hub_ccu_data, node);
}
static void __init kona_dt_master_ccu_setup(struct device_node *node)
{
kona_dt_ccu_setup(node, bcm281xx_master_ccu_clks_setup);
kona_dt_ccu_setup(&master_ccu_data, node);
}
static void __init kona_dt_slave_ccu_setup(struct device_node *node)
{
kona_dt_ccu_setup(node, bcm281xx_slave_ccu_clks_setup);
kona_dt_ccu_setup(&slave_ccu_data, node);
}
CLK_OF_DECLARE(bcm11351_root_ccu, BCM11351_DT_ROOT_CCU_COMPAT,
CLK_OF_DECLARE(bcm281xx_root_ccu, BCM281XX_DT_ROOT_CCU_COMPAT,
kona_dt_root_ccu_setup);
CLK_OF_DECLARE(bcm11351_aon_ccu, BCM11351_DT_AON_CCU_COMPAT,
CLK_OF_DECLARE(bcm281xx_aon_ccu, BCM281XX_DT_AON_CCU_COMPAT,
kona_dt_aon_ccu_setup);
CLK_OF_DECLARE(bcm11351_hub_ccu, BCM11351_DT_HUB_CCU_COMPAT,
CLK_OF_DECLARE(bcm281xx_hub_ccu, BCM281XX_DT_HUB_CCU_COMPAT,
kona_dt_hub_ccu_setup);
CLK_OF_DECLARE(bcm11351_master_ccu, BCM11351_DT_MASTER_CCU_COMPAT,
CLK_OF_DECLARE(bcm281xx_master_ccu, BCM281XX_DT_MASTER_CCU_COMPAT,
kona_dt_master_ccu_setup);
CLK_OF_DECLARE(bcm11351_slave_ccu, BCM11351_DT_SLAVE_CCU_COMPAT,
CLK_OF_DECLARE(bcm281xx_slave_ccu, BCM281XX_DT_SLAVE_CCU_COMPAT,
kona_dt_slave_ccu_setup);
drivers/clk/bcm/clk-kona-setup.c
View file @ dedca6ab
This diff is collapsed.
drivers/clk/bcm/clk-kona.c
View file @ dedca6ab
......@@ -16,6 +16,14 @@
#include <linux/delay.h>
/*
* "Policies" affect the frequencies of bus clocks provided by a
* CCU. (I believe these polices are named "Deep Sleep", "Economy",
* "Normal", and "Turbo".) A lower policy number has lower power
* consumption, and policy 2 is the default.
*/
#define CCU_POLICY_COUNT 4
#define CCU_ACCESS_PASSWORD 0xA5A500
#define CLK_GATE_DELAY_LOOP 2000
......@@ -207,9 +215,154 @@ __ccu_wait_bit(struct ccu_data *ccu, u32 reg_offset, u32 bit, bool want)
return true;
udelay(1);
}
pr_warn("%s: %s/0x%04x bit %u was never %s\n", __func__,
ccu->name, reg_offset, bit, want ? "set" : "clear");
return false;
}
/* Policy operations */
static bool __ccu_policy_engine_start(struct ccu_data *ccu, bool sync)
{
struct bcm_policy_ctl *control = &ccu->policy.control;
u32 offset;
u32 go_bit;
u32 mask;
bool ret;
/* If we don't need to control policy for this CCU, we're done. */
if (!policy_ctl_exists(control))
return true;
offset = control->offset;
go_bit = control->go_bit;
/* Ensure we're not busy before we start */
ret = __ccu_wait_bit(ccu, offset, go_bit, false);
if (!ret) {
pr_err("%s: ccu %s policy engine wouldn't go idle\n",
__func__, ccu->name);
return false;
}
/*
* If it's a synchronous request, we'll wait for the voltage
* and frequency of the active load to stabilize before
* returning. To do this we select the active load by
* setting the ATL bit.
*
* An asynchronous request instead ramps the voltage in the
* background, and when that process stabilizes, the target
* load is copied to the active load and the CCU frequency
* is switched. We do this by selecting the target load
* (ATL bit clear) and setting the request auto-copy (AC bit
* set).
*
* Note, we do NOT read-modify-write this register.
*/
mask = (u32)1 << go_bit;
if (sync)
mask |= 1 << control->atl_bit;
else
mask |= 1 << control->ac_bit;
__ccu_write(ccu, offset, mask);
/* Wait for indication that operation is complete. */
ret = __ccu_wait_bit(ccu, offset, go_bit, false);
if (!ret)
pr_err("%s: ccu %s policy engine never started\n",
__func__, ccu->name);
return ret;
}
static bool __ccu_policy_engine_stop(struct ccu_data *ccu)
{
struct bcm_lvm_en *enable = &ccu->policy.enable;
u32 offset;
u32 enable_bit;
bool ret;
/* If we don't need to control policy for this CCU, we're done. */
if (!policy_lvm_en_exists(enable))
return true;
/* Ensure we're not busy before we start */
offset = enable->offset;
enable_bit = enable->bit;
ret = __ccu_wait_bit(ccu, offset, enable_bit, false);
if (!ret) {
pr_err("%s: ccu %s policy engine already stopped\n",
__func__, ccu->name);
return false;
}
/* Now set the bit to stop the engine (NO read-modify-write) */
__ccu_write(ccu, offset, (u32)1 << enable_bit);
/* Wait for indication that it has stopped. */
ret = __ccu_wait_bit(ccu, offset, enable_bit, false);
if (!ret)
pr_err("%s: ccu %s policy engine never stopped\n",
__func__, ccu->name);
return ret;
}
/*
* A CCU has four operating conditions ("policies"), and some clocks
* can be disabled or enabled based on which policy is currently in
* effect. Such clocks have a bit in a "policy mask" register for
* each policy indicating whether the clock is enabled for that
* policy or not. The bit position for a clock is the same for all
* four registers, and the 32-bit registers are at consecutive
* addresses.
*/
static bool policy_init(struct ccu_data *ccu, struct bcm_clk_policy *policy)
{
u32 offset;
u32 mask;
int i;
bool ret;
if (!policy_exists(policy))
return true;
/*
* We need to stop the CCU policy engine to allow update
* of our policy bits.
*/
if (!__ccu_policy_engine_stop(ccu)) {
pr_err("%s: unable to stop CCU %s policy engine\n",
__func__, ccu->name);
return false;
}
/*
* For now, if a clock defines its policy bit we just mark
* it "enabled" for all four policies.
*/
offset = policy->offset;
mask = (u32)1 << policy->bit;
for (i = 0; i < CCU_POLICY_COUNT; i++) {
u32 reg_val;
reg_val = __ccu_read(ccu, offset);
reg_val |= mask;
__ccu_write(ccu, offset, reg_val);
offset += sizeof(u32);
}
/* We're done updating; fire up the policy engine again. */
ret = __ccu_policy_engine_start(ccu, true);
if (!ret)
pr_err("%s: unable to restart CCU %s policy engine\n",
__func__, ccu->name);
return ret;
}
/* Gate operations */
/* Determine whether a clock is gated. CCU lock must be held. */
......@@ -374,6 +527,35 @@ static int clk_gate(struct ccu_data *ccu, const char *name,
return -EIO;
}
/* Hysteresis operations */
/*
* If a clock gate requires a turn-off delay it will have
* "hysteresis" register bits defined. The first, if set, enables
* the delay; and if enabled, the second bit determines whether the
* delay is "low" or "high" (1 means high). For now, if it's
* defined for a clock, we set it.
*/
static bool hyst_init(struct ccu_data *ccu, struct bcm_clk_hyst *hyst)
{
u32 offset;
u32 reg_val;
u32 mask;
if (!hyst_exists(hyst))
return true;
offset = hyst->offset;
mask = (u32)1 << hyst->en_bit;
mask |= (u32)1 << hyst->val_bit;
reg_val = __ccu_read(ccu, offset);
reg_val |= mask;
__ccu_write(ccu, offset, reg_val);
return true;
}
/* Trigger operations */
/*
......@@ -806,7 +988,7 @@ static int kona_peri_clk_enable(struct clk_hw *hw)
struct kona_clk *bcm_clk = to_kona_clk(hw);
struct bcm_clk_gate *gate = &bcm_clk->u.peri->gate;
return clk_gate(bcm_clk->ccu, bcm_clk->name, gate, true);
return clk_gate(bcm_clk->ccu, bcm_clk->init_data.name, gate, true);
}
static void kona_peri_clk_disable(struct clk_hw *hw)
......@@ -814,7 +996,7 @@ static void kona_peri_clk_disable(struct clk_hw *hw)
struct kona_clk *bcm_clk = to_kona_clk(hw);
struct bcm_clk_gate *gate = &bcm_clk->u.peri->gate;
(void)clk_gate(bcm_clk->ccu, bcm_clk->name, gate, false);
(void)clk_gate(bcm_clk->ccu, bcm_clk->init_data.name, gate, false);
}
static int kona_peri_clk_is_enabled(struct clk_hw *hw)
......@@ -872,12 +1054,13 @@ static int kona_peri_clk_set_parent(struct clk_hw *hw, u8 index)
ret = selector_write(bcm_clk->ccu, &data->gate, sel, trig, index);
if (ret == -ENXIO) {
pr_err("%s: gating failure for %s\n", __func__, bcm_clk->name);
pr_err("%s: gating failure for %s\n", __func__,
bcm_clk->init_data.name);
ret = -EIO; /* Don't proliferate weird errors */
} else if (ret == -EIO) {
pr_err("%s: %strigger failed for %s\n", __func__,
trig == &data->pre_trig ? "pre-" : "",
bcm_clk->name);
bcm_clk->init_data.name);
}
return ret;
......@@ -936,10 +1119,12 @@ static int kona_peri_clk_set_rate(struct clk_hw *hw, unsigned long rate,
ret = divider_write(bcm_clk->ccu, &data->gate, &data->div,
&data->trig, scaled_div);
if (ret == -ENXIO) {
pr_err("%s: gating failure for %s\n", __func__, bcm_clk->name);
pr_err("%s: gating failure for %s\n", __func__,
bcm_clk->init_data.name);
ret = -EIO; /* Don't proliferate weird errors */
} else if (ret == -EIO) {
pr_err("%s: trigger failed for %s\n", __func__, bcm_clk->name);
pr_err("%s: trigger failed for %s\n", __func__,
bcm_clk->init_data.name);
}
return ret;
......@@ -961,15 +1146,24 @@ static bool __peri_clk_init(struct kona_clk *bcm_clk)
{
struct ccu_data *ccu = bcm_clk->ccu;
struct peri_clk_data *peri = bcm_clk->u.peri;
const char *name = bcm_clk->name;
const char *name = bcm_clk->init_data.name;
struct bcm_clk_trig *trig;
BUG_ON(bcm_clk->type != bcm_clk_peri);
if (!policy_init(ccu, &peri->policy)) {
pr_err("%s: error initializing policy for %s\n",
__func__, name);
return false;
}
if (!gate_init(ccu, &peri->gate)) {
pr_err("%s: error initializing gate for %s\n", __func__, name);
return false;
}
if (!hyst_init(ccu, &peri->hyst)) {
pr_err("%s: error initializing hyst for %s\n", __func__, name);
return false;
}
if (!div_init(ccu, &peri->gate, &peri->div, &peri->trig)) {
pr_err("%s: error initializing divider for %s\n", __func__,
name);
......@@ -1014,13 +1208,13 @@ bool __init kona_ccu_init(struct ccu_data *ccu)
{
unsigned long flags;
unsigned int which;
struct clk **clks = ccu->data.clks;
struct clk **clks = ccu->clk_data.clks;
bool success = true;
flags = ccu_lock(ccu);
__ccu_write_enable(ccu);
for (which = 0; which < ccu->data.clk_num; which++) {
for (which = 0; which < ccu->clk_data.clk_num; which++) {
struct kona_clk *bcm_clk;
if (!clks[which])
......
drivers/clk/bcm/clk-kona.h
View file @ dedca6ab
......@@ -43,8 +43,14 @@
#define FLAG_FLIP(obj, type, flag) ((obj)->flags ^= FLAG(type, flag))
#define FLAG_TEST(obj, type, flag) (!!((obj)->flags & FLAG(type, flag)))
/* CCU field state tests */
#define ccu_policy_exists(ccu_policy) ((ccu_policy)->enable.offset != 0)
/* Clock field state tests */
#define policy_exists(policy) ((policy)->offset != 0)
#define gate_exists(gate) FLAG_TEST(gate, GATE, EXISTS)
#define gate_is_enabled(gate) FLAG_TEST(gate, GATE, ENABLED)
#define gate_is_hw_controllable(gate) FLAG_TEST(gate, GATE, HW)
......@@ -54,6 +60,8 @@
#define gate_flip_enabled(gate) FLAG_FLIP(gate, GATE, ENABLED)
#define hyst_exists(hyst) ((hyst)->offset != 0)
#define divider_exists(div) FLAG_TEST(div, DIV, EXISTS)
#define divider_is_fixed(div) FLAG_TEST(div, DIV, FIXED)
#define divider_has_fraction(div) (!divider_is_fixed(div) && \
......@@ -62,6 +70,9 @@
#define selector_exists(sel) ((sel)->width != 0)
#define trigger_exists(trig) FLAG_TEST(trig, TRIG, EXISTS)
#define policy_lvm_en_exists(enable) ((enable)->offset != 0)
#define policy_ctl_exists(control) ((control)->offset != 0)
/* Clock type, used to tell common block what it's part of */
enum bcm_clk_type {
bcm_clk_none, /* undefined clock type */
......@@ -71,25 +82,26 @@ enum bcm_clk_type {
};
/*
* Each CCU defines a mapped area of memory containing registers
* used to manage clocks implemented by the CCU. Access to memory
* within the CCU's space is serialized by a spinlock. Before any
* (other) address can be written, a special access "password" value
* must be written to its WR_ACCESS register (located at the base
* address of the range). We keep track of the name of each CCU as
* it is set up, and maintain them in a list.
* CCU policy control for clocks. Clocks can be enabled or disabled
* based on the CCU policy in effect. One bit in each policy mask
* register (one per CCU policy) represents whether the clock is
* enabled when that policy is effect or not. The CCU policy engine
* must be stopped to update these bits, and must be restarted again
* afterward.
*/
struct ccu_data {
void __iomem *base; /* base of mapped address space */
spinlock_t lock; /* serialization lock */
bool write_enabled; /* write access is currently enabled */
struct list_head links; /* for ccu_list */
struct device_node *node;
struct clk_onecell_data data;
const char *name;
u32 range; /* byte range of address space */
struct bcm_clk_policy {
u32 offset; /* first policy mask register offset */
u32 bit; /* bit used in all mask registers */
};
/* Policy initialization macro */
#define POLICY(_offset, _bit) \
{ \
.offset = (_offset), \
.bit = (_bit), \
}
/*
* Gating control and status is managed by a 32-bit gate register.
*
......@@ -195,6 +207,22 @@ struct bcm_clk_gate {
.flags = FLAG(GATE, HW)|FLAG(GATE, EXISTS), \
}
/* Gate hysteresis for clocks */
struct bcm_clk_hyst {
u32 offset; /* hyst register offset (normally CLKGATE) */
u32 en_bit; /* bit used to enable hysteresis */
u32 val_bit; /* if enabled: 0 = low delay; 1 = high delay */
};
/* Hysteresis initialization macro */
#define HYST(_offset, _en_bit, _val_bit) \
{ \
.offset = (_offset), \
.en_bit = (_en_bit), \
.val_bit = (_val_bit), \
}
/*
* Each clock can have zero, one, or two dividers which change the
* output rate of the clock. Each divider can be either fixed or
......@@ -360,7 +388,9 @@ struct bcm_clk_trig {
}
struct peri_clk_data {
struct bcm_clk_policy policy;
struct bcm_clk_gate gate;
struct bcm_clk_hyst hyst;
struct bcm_clk_trig pre_trig;
struct bcm_clk_div pre_div;
struct bcm_clk_trig trig;
......@@ -373,8 +403,7 @@ struct peri_clk_data {
struct kona_clk {
struct clk_hw hw;
struct clk_init_data init_data;
const char *name; /* name of this clock */
struct clk_init_data init_data; /* includes name of this clock */
struct ccu_data *ccu; /* ccu this clock is associated with */
enum bcm_clk_type type;
union {
......@@ -385,14 +414,92 @@ struct kona_clk {
#define to_kona_clk(_hw) \
container_of(_hw, struct kona_clk, hw)
/* Exported globals */
/* Initialization macro for an entry in a CCU's kona_clks[] array. */
#define KONA_CLK(_ccu_name, _clk_name, _type) \
{ \
.init_data = { \
.name = #_clk_name, \
.ops = &kona_ ## _type ## _clk_ops, \
}, \
.ccu = &_ccu_name ## _ccu_data, \
.type = bcm_clk_ ## _type, \
.u.data = &_clk_name ## _data, \
}
#define LAST_KONA_CLK { .type = bcm_clk_none }
extern struct clk_ops kona_peri_clk_ops;
/*
* CCU policy control. To enable software update of the policy
* tables the CCU policy engine must be stopped by setting the
* software update enable bit (LVM_EN). After an update the engine
* is restarted using the GO bit and either the GO_ATL or GO_AC bit.
*/
struct bcm_lvm_en {
u32 offset; /* LVM_EN register offset */
u32 bit; /* POLICY_CONFIG_EN bit in register */
};
/* Policy enable initialization macro */
#define CCU_LVM_EN(_offset, _bit) \
{ \
.offset = (_offset), \
.bit = (_bit), \
}
struct bcm_policy_ctl {
u32 offset; /* POLICY_CTL register offset */
u32 go_bit;
u32 atl_bit; /* GO, GO_ATL, and GO_AC bits */
u32 ac_bit;
};
/* Policy control initialization macro */
#define CCU_POLICY_CTL(_offset, _go_bit, _ac_bit, _atl_bit) \
{ \
.offset = (_offset), \
.go_bit = (_go_bit), \
.ac_bit = (_ac_bit), \
.atl_bit = (_atl_bit), \
}
struct ccu_policy {
struct bcm_lvm_en enable;
struct bcm_policy_ctl control;
};
/*
* Each CCU defines a mapped area of memory containing registers
* used to manage clocks implemented by the CCU. Access to memory
* within the CCU's space is serialized by a spinlock. Before any
* (other) address can be written, a special access "password" value
* must be written to its WR_ACCESS register (located at the base
* address of the range). We keep track of the name of each CCU as
* it is set up, and maintain them in a list.
*/
struct ccu_data {
void __iomem *base; /* base of mapped address space */
spinlock_t lock; /* serialization lock */
bool write_enabled; /* write access is currently enabled */
struct ccu_policy policy;
struct list_head links; /* for ccu_list */
struct device_node *node;
struct clk_onecell_data clk_data;
const char *name;
u32 range; /* byte range of address space */
struct kona_clk kona_clks[]; /* must be last */
};
/* Help functions */
/* Initialization for common fields in a Kona ccu_data structure */
#define KONA_CCU_COMMON(_prefix, _name, _ccuname) \
.name = #_name "_ccu", \
.lock = __SPIN_LOCK_UNLOCKED(_name ## _ccu_data.lock), \
.links = LIST_HEAD_INIT(_name ## _ccu_data.links), \
.clk_data = { \
.clk_num = _prefix ## _ ## _ccuname ## _CCU_CLOCK_COUNT, \
}
/* Exported globals */
#define PERI_CLK_SETUP(clks, ccu, id, name) \
clks[id] = kona_clk_setup(ccu, #name, bcm_clk_peri, &name ## _data)
extern struct clk_ops kona_peri_clk_ops;
/* Externally visible functions */
......@@ -401,10 +508,9 @@ extern u64 scaled_div_max(struct bcm_clk_div *div);
extern u64 scaled_div_build(struct bcm_clk_div *div, u32 div_value,
u32 billionths);
extern struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name,
enum bcm_clk_type type, void *data);
extern void __init kona_dt_ccu_setup(struct device_node *node,
int (*ccu_clks_setup)(struct ccu_data *));
extern struct clk *kona_clk_setup(struct kona_clk *bcm_clk);
extern void __init kona_dt_ccu_setup(struct ccu_data *ccu,
struct device_node *node);
extern bool __init kona_ccu_init(struct ccu_data *ccu);
#endif /* _CLK_KONA_H */
drivers/clk/clk-axm5516.c 0 → 100644
View file @ dedca6ab
This diff is collapsed.
drivers/clk/clk-divider.c
View file @ dedca6ab
......@@ -43,6 +43,17 @@ static unsigned int _get_table_maxdiv(const struct clk_div_table *table)
return maxdiv;
}
static unsigned int _get_table_mindiv(const struct clk_div_table *table)
{
unsigned int mindiv = UINT_MAX;
const struct clk_div_table *clkt;
for (clkt = table; clkt->div; clkt++)
if (clkt->div < mindiv)
mindiv = clkt->div;
return mindiv;
}
static unsigned int _get_maxdiv(struct clk_divider *divider)
{
if (divider->flags & CLK_DIVIDER_ONE_BASED)
......@@ -162,6 +173,24 @@ static int _round_up_table(const struct clk_div_table *table, int div)
return up;
}
static int _round_down_table(const struct clk_div_table *table, int div)
{
const struct clk_div_table *clkt;
int down = _get_table_mindiv(table);
for (clkt = table; clkt->div; clkt++) {
if (clkt->div == div)
return clkt->div;
else if (clkt->div > div)
continue;
if ((div - clkt->div) < (div - down))
down = clkt->div;
}
return down;
}
static int _div_round_up(struct clk_divider *divider,
unsigned long parent_rate, unsigned long rate)
{
......@@ -175,6 +204,54 @@ static int _div_round_up(struct clk_divider *divider,
return div;
}
static int _div_round_closest(struct clk_divider *divider,
unsigned long parent_rate, unsigned long rate)
{
int up, down, div;
up = down = div = DIV_ROUND_CLOSEST(parent_rate, rate);
if (divider->flags & CLK_DIVIDER_POWER_OF_TWO) {
up = __roundup_pow_of_two(div);
down = __rounddown_pow_of_two(div);
} else if (divider->table) {
up = _round_up_table(divider->table, div);
down = _round_down_table(divider->table, div);
}
return (up - div) <= (div - down) ? up : down;
}
static int _div_round(struct clk_divider *divider, unsigned long parent_rate,
unsigned long rate)
{
if (divider->flags & CLK_DIVIDER_ROUND_CLOSEST)
return _div_round_closest(divider, parent_rate, rate);
return _div_round_up(divider, parent_rate, rate);
}
static bool _is_best_div(struct clk_divider *divider,
int rate, int now, int best)
{
if (divider->flags & CLK_DIVIDER_ROUND_CLOSEST)
return abs(rate - now) < abs(rate - best);
return now <= rate && now > best;
}
static int _next_div(struct clk_divider *divider, int div)
{
div++;
if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
return __roundup_pow_of_two(div);
if (divider->table)
return _round_up_table(divider->table, div);
return div;
}
static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
unsigned long *best_parent_rate)
{
......@@ -190,7 +267,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) {
parent_rate = *best_parent_rate;
bestdiv = _div_round_up(divider, parent_rate, rate);
bestdiv = _div_round(divider, parent_rate, rate);
bestdiv = bestdiv == 0 ? 1 : bestdiv;
bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv;
return bestdiv;
......@@ -202,7 +279,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
*/
maxdiv = min(ULONG_MAX / rate, maxdiv);
for (i = 1; i <= maxdiv; i++) {
for (i = 1; i <= maxdiv; i = _next_div(divider, i)) {
if (!_is_valid_div(divider, i))
continue;
if (rate * i == parent_rate_saved) {
......@@ -217,7 +294,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
parent_rate = __clk_round_rate(__clk_get_parent(hw->clk),
MULT_ROUND_UP(rate, i));
now = DIV_ROUND_UP(parent_rate, i);
if (now <= rate && now > best) {
if (_is_best_div(divider, rate, now, best)) {
bestdiv = i;
best = now;
*best_parent_rate = parent_rate;
......@@ -284,6 +361,11 @@ const struct clk_ops clk_divider_ops = {
};
EXPORT_SYMBOL_GPL(clk_divider_ops);
const struct clk_ops clk_divider_ro_ops = {
.recalc_rate = clk_divider_recalc_rate,
};
EXPORT_SYMBOL_GPL(clk_divider_ro_ops);
static struct clk *_register_divider(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
......@@ -309,7 +391,10 @@ static struct clk *_register_divider(struct device *dev, const char *name,
}
init.name = name;
init.ops = &clk_divider_ops;
if (clk_divider_flags & CLK_DIVIDER_READ_ONLY)
init.ops = &clk_divider_ro_ops;
else
init.ops = &clk_divider_ops;
init.flags = flags | CLK_IS_BASIC;
init.parent_names = (parent_name ? &parent_name: NULL);
init.num_parents = (parent_name ? 1 : 0);
......
drivers/clk/clk-si570.c
View file @ dedca6ab
......@@ -526,6 +526,6 @@ static struct i2c_driver si570_driver = {
module_i2c_driver(si570_driver);
MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xilinx.com");
MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xilinx.com>");
MODULE_DESCRIPTION("Si570 driver");
MODULE_LICENSE("GPL");
drivers/clk/clk.c
View file @ dedca6ab
......@@ -106,12 +106,11 @@ static void clk_summary_show_one(struct seq_file *s, struct clk *c, int level)
if (!c)
return;
seq_printf(s, "%*s%-*s %-11d %-12d %-10lu %-11lu",
seq_printf(s, "%*s%-*s %11d %12d %11lu %10lu\n",
level * 3 + 1, "",
30 - level * 3, c->name,
c->enable_count, c->prepare_count, clk_get_rate(c),
clk_get_accuracy(c));
seq_printf(s, "\n");
}
static void clk_summary_show_subtree(struct seq_file *s, struct clk *c,
......@@ -132,8 +131,8 @@ static int clk_summary_show(struct seq_file *s, void *data)
{
struct clk *c;
seq_printf(s, " clock enable_cnt prepare_cnt rate accuracy\n");
seq_printf(s, "---------------------------------------------------------------------------------\n");
seq_puts(s, " clock enable_cnt prepare_cnt rate accuracy\n");
seq_puts(s, "--------------------------------------------------------------------------------\n");
clk_prepare_lock();
......@@ -822,6 +821,9 @@ void __clk_unprepare(struct clk *clk)
*/
void clk_unprepare(struct clk *clk)
{
if (IS_ERR_OR_NULL(clk))
return;
clk_prepare_lock();
__clk_unprepare(clk);
clk_prepare_unlock();
......@@ -883,9 +885,6 @@ static void __clk_disable(struct clk *clk)
if (!clk)
return;
if (WARN_ON(IS_ERR(clk)))
return;
if (WARN_ON(clk->enable_count == 0))
return;
......@@ -914,6 +913,9 @@ void clk_disable(struct clk *clk)
{
unsigned long flags;
if (IS_ERR_OR_NULL(clk))
return;
flags = clk_enable_lock();
__clk_disable(clk);
clk_enable_unlock(flags);
......@@ -1115,6 +1117,13 @@ long clk_get_accuracy(struct clk *clk)
}
EXPORT_SYMBOL_GPL(clk_get_accuracy);
static unsigned long clk_recalc(struct clk *clk, unsigned long parent_rate)
{
if (clk->ops->recalc_rate)
return clk->ops->recalc_rate(clk->hw, parent_rate);
return parent_rate;
}
/**
* __clk_recalc_rates
* @clk: first clk in the subtree
......@@ -1140,10 +1149,7 @@ static void __clk_recalc_rates(struct clk *clk, unsigned long msg)
if (clk->parent)
parent_rate = clk->parent->rate;
if (clk->ops->recalc_rate)
clk->rate = clk->ops->recalc_rate(clk->hw, parent_rate);
else
clk->rate = parent_rate;
clk->rate = clk_recalc(clk, parent_rate);
/*
* ignore NOTIFY_STOP and NOTIFY_BAD return values for POST_RATE_CHANGE
......@@ -1334,10 +1340,7 @@ static int __clk_speculate_rates(struct clk *clk, unsigned long parent_rate)
unsigned long new_rate;
int ret = NOTIFY_DONE;
if (clk->ops->recalc_rate)
new_rate = clk->ops->recalc_rate(clk->hw, parent_rate);
else
new_rate = parent_rate;
new_rate = clk_recalc(clk, parent_rate);
/* abort rate change if a driver returns NOTIFY_BAD or NOTIFY_STOP */
if (clk->notifier_count)
......@@ -1373,10 +1376,7 @@ static void clk_calc_subtree(struct clk *clk, unsigned long new_rate,
new_parent->new_child = clk;
hlist_for_each_entry(child, &clk->children, child_node) {
if (child->ops->recalc_rate)
child->new_rate = child->ops->recalc_rate(child->hw, new_rate);
else
child->new_rate = new_rate;
child->new_rate = clk_recalc(child, new_rate);
clk_calc_subtree(child, child->new_rate, NULL, 0);
}
}
......@@ -1524,10 +1524,7 @@ static void clk_change_rate(struct clk *clk)
if (!skip_set_rate && clk->ops->set_rate)
clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate);
if (clk->ops->recalc_rate)
clk->rate = clk->ops->recalc_rate(clk->hw, best_parent_rate);
else
clk->rate = best_parent_rate;
clk->rate = clk_recalc(clk, best_parent_rate);
if (clk->notifier_count && old_rate != clk->rate)
__clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate);
......@@ -1716,9 +1713,6 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
if (!clk)
return 0;
if (!clk->ops)
return -EINVAL;
/* verify ops for for multi-parent clks */
if ((clk->num_parents > 1) && (!clk->ops->set_parent))
return -ENOSYS;
......
drivers/clk/clk.h
View file @ dedca6ab
......@@ -10,6 +10,7 @@
*/
#if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK)
struct clk *of_clk_get_by_clkspec(struct of_phandle_args *clkspec);
struct clk *__of_clk_get_from_provider(struct of_phandle_args *clkspec);
void of_clk_lock(void);
void of_clk_unlock(void);
......
drivers/clk/clkdev.c
View file @ dedca6ab
......@@ -27,6 +27,32 @@ static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
#if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK)
/**
* of_clk_get_by_clkspec() - Lookup a clock form a clock provider
* @clkspec: pointer to a clock specifier data structure
*
* This function looks up a struct clk from the registered list of clock
* providers, an input is a clock specifier data structure as returned
* from the of_parse_phandle_with_args() function call.
*/
struct clk *of_clk_get_by_clkspec(struct of_phandle_args *clkspec)
{
struct clk *clk;
if (!clkspec)
return ERR_PTR(-EINVAL);
of_clk_lock();
clk = __of_clk_get_from_provider(clkspec);
if (!IS_ERR(clk) && !__clk_get(clk))
clk = ERR_PTR(-ENOENT);
of_clk_unlock();
return clk;
}
struct clk *of_clk_get(struct device_node *np, int index)
{
struct of_phandle_args clkspec;
......@@ -41,13 +67,7 @@ struct clk *of_clk_get(struct device_node *np, int index)
if (rc)
return ERR_PTR(rc);
of_clk_lock();
clk = __of_clk_get_from_provider(&clkspec);
if (!IS_ERR(clk) && !__clk_get(clk))
clk = ERR_PTR(-ENOENT);
of_clk_unlock();
clk = of_clk_get_by_clkspec(&clkspec);
of_node_put(clkspec.np);
return clk;
}
......
drivers/clk/hisilicon/Makefile
View file @ dedca6ab
......@@ -6,3 +6,4 @@ obj-y += clk.o clkgate-separated.o
obj-$(CONFIG_ARCH_HI3xxx) += clk-hi3620.o
obj-$(CONFIG_ARCH_HIP04) += clk-hip04.o
obj-$(CONFIG_ARCH_HIX5HD2) += clk-hix5hd2.o
drivers/clk/hisilicon/clk-hix5hd2.c 0 → 100644
View file @ dedca6ab
/*
* Copyright (c) 2014 Linaro Ltd.
* Copyright (c) 2014 Hisilicon Limited.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*/
#include <linux/of_address.h>
#include <dt-bindings/clock/hix5hd2-clock.h>
#include "clk.h"
static struct hisi_fixed_rate_clock hix5hd2_fixed_rate_clks[] __initdata = {
{ HIX5HD2_FIXED_1200M, "1200m", NULL, CLK_IS_ROOT, 1200000000, },
{ HIX5HD2_FIXED_400M, "400m", NULL, CLK_IS_ROOT, 400000000, },
{ HIX5HD2_FIXED_48M, "48m", NULL, CLK_IS_ROOT, 48000000, },
{ HIX5HD2_FIXED_24M, "24m", NULL, CLK_IS_ROOT, 24000000, },
{ HIX5HD2_FIXED_600M, "600m", NULL, CLK_IS_ROOT, 600000000, },
{ HIX5HD2_FIXED_300M, "300m", NULL, CLK_IS_ROOT, 300000000, },
{ HIX5HD2_FIXED_75M, "75m", NULL, CLK_IS_ROOT, 75000000, },
{ HIX5HD2_FIXED_200M, "200m", NULL, CLK_IS_ROOT, 200000000, },
{ HIX5HD2_FIXED_100M, "100m", NULL, CLK_IS_ROOT, 100000000, },
{ HIX5HD2_FIXED_40M, "40m", NULL, CLK_IS_ROOT, 40000000, },
{ HIX5HD2_FIXED_150M, "150m", NULL, CLK_IS_ROOT, 150000000, },
{ HIX5HD2_FIXED_1728M, "1728m", NULL, CLK_IS_ROOT, 1728000000, },
{ HIX5HD2_FIXED_28P8M, "28p8m", NULL, CLK_IS_ROOT, 28000000, },
{ HIX5HD2_FIXED_432M, "432m", NULL, CLK_IS_ROOT, 432000000, },
{ HIX5HD2_FIXED_345P6M, "345p6m", NULL, CLK_IS_ROOT, 345000000, },
{ HIX5HD2_FIXED_288M, "288m", NULL, CLK_IS_ROOT, 288000000, },
{ HIX5HD2_FIXED_60M, "60m", NULL, CLK_IS_ROOT, 60000000, },
{ HIX5HD2_FIXED_750M, "750m", NULL, CLK_IS_ROOT, 750000000, },
{ HIX5HD2_FIXED_500M, "500m", NULL, CLK_IS_ROOT, 500000000, },
{ HIX5HD2_FIXED_54M, "54m", NULL, CLK_IS_ROOT, 54000000, },
{ HIX5HD2_FIXED_27M, "27m", NULL, CLK_IS_ROOT, 27000000, },
{ HIX5HD2_FIXED_1500M, "1500m", NULL, CLK_IS_ROOT, 1500000000, },
{ HIX5HD2_FIXED_375M, "375m", NULL, CLK_IS_ROOT, 375000000, },
{ HIX5HD2_FIXED_187M, "187m", NULL, CLK_IS_ROOT, 187000000, },
{ HIX5HD2_FIXED_250M, "250m", NULL, CLK_IS_ROOT, 250000000, },
{ HIX5HD2_FIXED_125M, "125m", NULL, CLK_IS_ROOT, 125000000, },
{ HIX5HD2_FIXED_2P02M, "2m", NULL, CLK_IS_ROOT, 2000000, },
{ HIX5HD2_FIXED_50M, "50m", NULL, CLK_IS_ROOT, 50000000, },
{ HIX5HD2_FIXED_25M, "25m", NULL, CLK_IS_ROOT, 25000000, },
{ HIX5HD2_FIXED_83M, "83m", NULL, CLK_IS_ROOT, 83333333, },
};
static const char *sfc_mux_p[] __initconst = {
"24m", "150m", "200m", "100m", "75m", };
static u32 sfc_mux_table[] = {0, 4, 5, 6, 7};
static const char *sdio1_mux_p[] __initconst = {
"75m", "100m", "50m", "15m", };
static u32 sdio1_mux_table[] = {0, 1, 2, 3};
static const char *fephy_mux_p[] __initconst = { "25m", "125m"};
static u32 fephy_mux_table[] = {0, 1};
static struct hisi_mux_clock hix5hd2_mux_clks[] __initdata = {
{ HIX5HD2_SFC_MUX, "sfc_mux", sfc_mux_p, ARRAY_SIZE(sfc_mux_p),
CLK_SET_RATE_PARENT, 0x5c, 8, 3, 0, sfc_mux_table, },
{ HIX5HD2_MMC_MUX, "mmc_mux", sdio1_mux_p, ARRAY_SIZE(sdio1_mux_p),
CLK_SET_RATE_PARENT, 0xa0, 8, 2, 0, sdio1_mux_table, },
{ HIX5HD2_FEPHY_MUX, "fephy_mux",
fephy_mux_p, ARRAY_SIZE(fephy_mux_p),
CLK_SET_RATE_PARENT, 0x120, 8, 2, 0, fephy_mux_table, },
};
static struct hisi_gate_clock hix5hd2_gate_clks[] __initdata = {
/*sfc*/
{ HIX5HD2_SFC_CLK, "clk_sfc", "sfc_mux",
CLK_SET_RATE_PARENT, 0x5c, 0, 0, },
{ HIX5HD2_SFC_RST, "rst_sfc", "clk_sfc",
CLK_SET_RATE_PARENT, 0x5c, 4, CLK_GATE_SET_TO_DISABLE, },
/*sdio1*/
{ HIX5HD2_MMC_BIU_CLK, "clk_mmc_biu", "200m",
CLK_SET_RATE_PARENT, 0xa0, 0, 0, },
{ HIX5HD2_MMC_CIU_CLK, "clk_mmc_ciu", "mmc_mux",
CLK_SET_RATE_PARENT, 0xa0, 1, 0, },
{ HIX5HD2_MMC_CIU_RST, "rst_mmc_ciu", "clk_mmc_ciu",
CLK_SET_RATE_PARENT, 0xa0, 4, CLK_GATE_SET_TO_DISABLE, },
};
static void __init hix5hd2_clk_init(struct device_node *np)
{
struct hisi_clock_data *clk_data;
clk_data = hisi_clk_init(np, HIX5HD2_NR_CLKS);
if (!clk_data)
return;
hisi_clk_register_fixed_rate(hix5hd2_fixed_rate_clks,
ARRAY_SIZE(hix5hd2_fixed_rate_clks),
clk_data);
hisi_clk_register_mux(hix5hd2_mux_clks, ARRAY_SIZE(hix5hd2_mux_clks),
clk_data);
hisi_clk_register_gate(hix5hd2_gate_clks,
ARRAY_SIZE(hix5hd2_gate_clks), clk_data);
}
CLK_OF_DECLARE(hix5hd2_clk, "hisilicon,hix5hd2-clock", hix5hd2_clk_init);
drivers/clk/hisilicon/clk.c
View file @ dedca6ab
......@@ -127,11 +127,14 @@ void __init hisi_clk_register_mux(struct hisi_mux_clock *clks,
int i;
for (i = 0; i < nums; i++) {
clk = clk_register_mux(NULL, clks[i].name, clks[i].parent_names,
clks[i].num_parents, clks[i].flags,
base + clks[i].offset, clks[i].shift,
clks[i].width, clks[i].mux_flags,
&hisi_clk_lock);
u32 mask = BIT(clks[i].width) - 1;
clk = clk_register_mux_table(NULL, clks[i].name,
clks[i].parent_names,
clks[i].num_parents, clks[i].flags,
base + clks[i].offset, clks[i].shift,
mask, clks[i].mux_flags,
clks[i].table, &hisi_clk_lock);
if (IS_ERR(clk)) {
pr_err("%s: failed to register clock %s\n",
__func__, clks[i].name);
......@@ -174,6 +177,34 @@ void __init hisi_clk_register_divider(struct hisi_divider_clock *clks,
}
}
void __init hisi_clk_register_gate(struct hisi_gate_clock *clks,
int nums, struct hisi_clock_data *data)
{
struct clk *clk;
void __iomem *base = data->base;
int i;
for (i = 0; i < nums; i++) {
clk = clk_register_gate(NULL, clks[i].name,
clks[i].parent_name,
clks[i].flags,
base + clks[i].offset,
clks[i].bit_idx,
clks[i].gate_flags,
&hisi_clk_lock);
if (IS_ERR(clk)) {
pr_err("%s: failed to register clock %s\n",
__func__, clks[i].name);
continue;
}
if (clks[i].alias)
clk_register_clkdev(clk, clks[i].alias, NULL);
data->clk_data.clks[clks[i].id] = clk;
}
}
void __init hisi_clk_register_gate_sep(struct hisi_gate_clock *clks,
int nums, struct hisi_clock_data *data)
{
......
drivers/clk/hisilicon/clk.h
View file @ dedca6ab
......@@ -62,6 +62,7 @@ struct hisi_mux_clock {
u8 shift;
u8 width;
u8 mux_flags;
u32 *table;
const char *alias;
};
......@@ -103,6 +104,8 @@ void __init hisi_clk_register_mux(struct hisi_mux_clock *, int,
struct hisi_clock_data *);
void __init hisi_clk_register_divider(struct hisi_divider_clock *,
int, struct hisi_clock_data *);
void __init hisi_clk_register_gate(struct hisi_gate_clock *,
int, struct hisi_clock_data *);
void __init hisi_clk_register_gate_sep(struct hisi_gate_clock *,
int, struct hisi_clock_data *);
#endif /* __HISI_CLK_H */
drivers/clk/mvebu/Kconfig
View file @ dedca6ab
......@@ -34,3 +34,7 @@ config DOVE_CLK
config KIRKWOOD_CLK
bool
select MVEBU_CLK_COMMON
config ORION_CLK
bool
select MVEBU_CLK_COMMON
drivers/clk/mvebu/Makefile
View file @ dedca6ab
......@@ -8,3 +8,4 @@ obj-$(CONFIG_ARMADA_38X_CLK) += armada-38x.o
obj-$(CONFIG_ARMADA_XP_CLK) += armada-xp.o
obj-$(CONFIG_DOVE_CLK) += dove.o
obj-$(CONFIG_KIRKWOOD_CLK) += kirkwood.o
obj-$(CONFIG_ORION_CLK) += orion.o
drivers/clk/mvebu/orion.c 0 → 100644
View file @ dedca6ab
/*
* Marvell Orion SoC clocks
*
* Copyright (C) 2014 Thomas Petazzoni
*
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/of.h>
#include "common.h"
static const struct coreclk_ratio orion_coreclk_ratios[] __initconst = {
{ .id = 0, .name = "ddrclk", }
};
/*
* Orion 5182
*/
#define SAR_MV88F5182_TCLK_FREQ 8
#define SAR_MV88F5182_TCLK_FREQ_MASK 0x3
static u32 __init mv88f5182_get_tclk_freq(void __iomem *sar)
{
u32 opt = (readl(sar) >> SAR_MV88F5182_TCLK_FREQ) &
SAR_MV88F5182_TCLK_FREQ_MASK;
if (opt == 1)
return 150000000;
else if (opt == 2)
return 166666667;
else
return 0;
}
#define SAR_MV88F5182_CPU_FREQ 4
#define SAR_MV88F5182_CPU_FREQ_MASK 0xf
static u32 __init mv88f5182_get_cpu_freq(void __iomem *sar)
{
u32 opt = (readl(sar) >> SAR_MV88F5182_CPU_FREQ) &
SAR_MV88F5182_CPU_FREQ_MASK;
if (opt == 0)
return 333333333;
else if (opt == 1 || opt == 2)
return 400000000;
else if (opt == 3)
return 500000000;
else
return 0;
}
static void __init mv88f5182_get_clk_ratio(void __iomem *sar, int id,
int *mult, int *div)
{
u32 opt = (readl(sar) >> SAR_MV88F5182_CPU_FREQ) &
SAR_MV88F5182_CPU_FREQ_MASK;
if (opt == 0 || opt == 1) {
*mult = 1;
*div = 2;
} else if (opt == 2 || opt == 3) {
*mult = 1;
*div = 3;
} else {
*mult = 0;
*div = 1;
}
}
static const struct coreclk_soc_desc mv88f5182_coreclks = {
.get_tclk_freq = mv88f5182_get_tclk_freq,
.get_cpu_freq = mv88f5182_get_cpu_freq,
.get_clk_ratio = mv88f5182_get_clk_ratio,
.ratios = orion_coreclk_ratios,
.num_ratios = ARRAY_SIZE(orion_coreclk_ratios),
};
static void __init mv88f5182_clk_init(struct device_node *np)
{
return mvebu_coreclk_setup(np, &mv88f5182_coreclks);
}
CLK_OF_DECLARE(mv88f5182_clk, "marvell,mv88f5182-core-clock", mv88f5182_clk_init);
/*
* Orion 5281
*/
static u32 __init mv88f5281_get_tclk_freq(void __iomem *sar)
{
/* On 5281, tclk is always 166 Mhz */
return 166666667;
}
#define SAR_MV88F5281_CPU_FREQ 4
#define SAR_MV88F5281_CPU_FREQ_MASK 0xf
static u32 __init mv88f5281_get_cpu_freq(void __iomem *sar)
{
u32 opt = (readl(sar) >> SAR_MV88F5281_CPU_FREQ) &
SAR_MV88F5281_CPU_FREQ_MASK;
if (opt == 1 || opt == 2)
return 400000000;
else if (opt == 3)
return 500000000;
else
return 0;
}
static void __init mv88f5281_get_clk_ratio(void __iomem *sar, int id,
int *mult, int *div)
{
u32 opt = (readl(sar) >> SAR_MV88F5281_CPU_FREQ) &
SAR_MV88F5281_CPU_FREQ_MASK;
if (opt == 1) {
*mult = 1;
*div = 2;
} else if (opt == 2 || opt == 3) {
*mult = 1;
*div = 3;
} else {
*mult = 0;
*div = 1;
}
}
static const struct coreclk_soc_desc mv88f5281_coreclks = {
.get_tclk_freq = mv88f5281_get_tclk_freq,
.get_cpu_freq = mv88f5281_get_cpu_freq,
.get_clk_ratio = mv88f5281_get_clk_ratio,
.ratios = orion_coreclk_ratios,
.num_ratios = ARRAY_SIZE(orion_coreclk_ratios),
};
static void __init mv88f5281_clk_init(struct device_node *np)
{
return mvebu_coreclk_setup(np, &mv88f5281_coreclks);
}
CLK_OF_DECLARE(mv88f5281_clk, "marvell,mv88f5281-core-clock", mv88f5281_clk_init);
/*
* Orion 6183
*/
#define SAR_MV88F6183_TCLK_FREQ 9
#define SAR_MV88F6183_TCLK_FREQ_MASK 0x1
static u32 __init mv88f6183_get_tclk_freq(void __iomem *sar)
{
u32 opt = (readl(sar) >> SAR_MV88F6183_TCLK_FREQ) &
SAR_MV88F6183_TCLK_FREQ_MASK;
if (opt == 0)
return 133333333;
else if (opt == 1)
return 166666667;
else
return 0;
}
#define SAR_MV88F6183_CPU_FREQ 1
#define SAR_MV88F6183_CPU_FREQ_MASK 0x3f
static u32 __init mv88f6183_get_cpu_freq(void __iomem *sar)
{
u32 opt = (readl(sar) >> SAR_MV88F6183_CPU_FREQ) &
SAR_MV88F6183_CPU_FREQ_MASK;
if (opt == 9)
return 333333333;
else if (opt == 17)
return 400000000;
else
return 0;
}
static void __init mv88f6183_get_clk_ratio(void __iomem *sar, int id,
int *mult, int *div)
{
u32 opt = (readl(sar) >> SAR_MV88F6183_CPU_FREQ) &
SAR_MV88F6183_CPU_FREQ_MASK;
if (opt == 9 || opt == 17) {
*mult = 1;
*div = 2;
} else {
*mult = 0;
*div = 1;
}
}
static const struct coreclk_soc_desc mv88f6183_coreclks = {
.get_tclk_freq = mv88f6183_get_tclk_freq,
.get_cpu_freq = mv88f6183_get_cpu_freq,
.get_clk_ratio = mv88f6183_get_clk_ratio,
.ratios = orion_coreclk_ratios,
.num_ratios = ARRAY_SIZE(orion_coreclk_ratios),
};
static void __init mv88f6183_clk_init(struct device_node *np)
{
return mvebu_coreclk_setup(np, &mv88f6183_coreclks);
}
CLK_OF_DECLARE(mv88f6183_clk, "marvell,mv88f6183-core-clock", mv88f6183_clk_init);
drivers/clk/qcom/Kconfig
View file @ dedca6ab
......@@ -13,10 +13,10 @@ config MSM_GCC_8660
i2c, USB, SD/eMMC, etc.
config MSM_GCC_8960
tristate "MSM8960 Global Clock Controller"
tristate "APQ8064/MSM8960 Global Clock Controller"
depends on COMMON_CLK_QCOM
help
Support for the global clock controller on msm8960 devices.
Support for the global clock controller on apq8064/msm8960 devices.
Say Y if you want to use peripheral devices such as UART, SPI,
i2c, USB, SD/eMMC, SATA, PCIe, etc.
......
drivers/clk/qcom/Makefile
View file @ dedca6ab
obj-$(CONFIG_COMMON_CLK_QCOM) += clk-qcom.o
clk-qcom-y += common.o
clk-qcom-y += clk-regmap.o
clk-qcom-y += clk-pll.o
clk-qcom-y += clk-rcg.o
......
drivers/clk/qcom/common.c 0 → 100644
View file @ dedca6ab
/*
* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/export.h>
#include <linux/regmap.h>
#include <linux/platform_device.h>
#include <linux/clk-provider.h>
#include <linux/reset-controller.h>
#include "common.h"
#include "clk-regmap.h"
#include "reset.h"
struct qcom_cc {
struct qcom_reset_controller reset;
struct clk_onecell_data data;
struct clk *clks[];
};
int qcom_cc_probe(struct platform_device *pdev, const struct qcom_cc_desc *desc)
{
void __iomem *base;
struct resource *res;
int i, ret;
struct device *dev = &pdev->dev;
struct clk *clk;
struct clk_onecell_data *data;
struct clk **clks;
struct regmap *regmap;
struct qcom_reset_controller *reset;
struct qcom_cc *cc;
size_t num_clks = desc->num_clks;
struct clk_regmap **rclks = desc->clks;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
regmap = devm_regmap_init_mmio(dev, base, desc->config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks,
GFP_KERNEL);
if (!cc)
return -ENOMEM;
clks = cc->clks;
data = &cc->data;
data->clks = clks;
data->clk_num = num_clks;
for (i = 0; i < num_clks; i++) {
if (!rclks[i])
continue;
clk = devm_clk_register_regmap(dev, rclks[i]);
if (IS_ERR(clk))
return PTR_ERR(clk);
clks[i] = clk;
}
ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data);
if (ret)
return ret;
reset = &cc->reset;
reset->rcdev.of_node = dev->of_node;
reset->rcdev.ops = &qcom_reset_ops;
reset->rcdev.owner = dev->driver->owner;
reset->rcdev.nr_resets = desc->num_resets;
reset->regmap = regmap;
reset->reset_map = desc->resets;
platform_set_drvdata(pdev, &reset->rcdev);
ret = reset_controller_register(&reset->rcdev);
if (ret)
of_clk_del_provider(dev->of_node);
return ret;
}
EXPORT_SYMBOL_GPL(qcom_cc_probe);
void qcom_cc_remove(struct platform_device *pdev)
{
of_clk_del_provider(pdev->dev.of_node);
reset_controller_unregister(platform_get_drvdata(pdev));
}
EXPORT_SYMBOL_GPL(qcom_cc_remove);
drivers/clk/qcom/common.h 0 → 100644
View file @ dedca6ab
/*
* Copyright (c) 2014, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __QCOM_CLK_COMMON_H__
#define __QCOM_CLK_COMMON_H__
struct platform_device;
struct regmap_config;
struct clk_regmap;
struct qcom_reset_map;
struct qcom_cc_desc {
const struct regmap_config *config;
struct clk_regmap **clks;
size_t num_clks;
const struct qcom_reset_map *resets;
size_t num_resets;
};
extern int qcom_cc_probe(struct platform_device *pdev,
const struct qcom_cc_desc *desc);
extern void qcom_cc_remove(struct platform_device *pdev);
#endif
drivers/clk/qcom/gcc-msm8660.c
View file @ dedca6ab
......@@ -25,6 +25,7 @@
#include <dt-bindings/clock/qcom,gcc-msm8660.h>
#include <dt-bindings/reset/qcom,gcc-msm8660.h>
#include "common.h"
#include "clk-regmap.h"
#include "clk-pll.h"
#include "clk-rcg.h"
......@@ -2701,51 +2702,24 @@ static const struct regmap_config gcc_msm8660_regmap_config = {
.fast_io = true,
};
static const struct qcom_cc_desc gcc_msm8660_desc = {
.config = &gcc_msm8660_regmap_config,
.clks = gcc_msm8660_clks,
.num_clks = ARRAY_SIZE(gcc_msm8660_clks),
.resets = gcc_msm8660_resets,
.num_resets = ARRAY_SIZE(gcc_msm8660_resets),
};
static const struct of_device_id gcc_msm8660_match_table[] = {
{ .compatible = "qcom,gcc-msm8660" },
{ }
};
MODULE_DEVICE_TABLE(of, gcc_msm8660_match_table);
struct qcom_cc {
struct qcom_reset_controller reset;
struct clk_onecell_data data;
struct clk *clks[];
};
static int gcc_msm8660_probe(struct platform_device *pdev)
{
void __iomem *base;
struct resource *res;
int i, ret;
struct device *dev = &pdev->dev;
struct clk *clk;
struct clk_onecell_data *data;
struct clk **clks;
struct regmap *regmap;
size_t num_clks;
struct qcom_reset_controller *reset;
struct qcom_cc *cc;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
regmap = devm_regmap_init_mmio(dev, base, &gcc_msm8660_regmap_config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
num_clks = ARRAY_SIZE(gcc_msm8660_clks);
cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks,
GFP_KERNEL);
if (!cc)
return -ENOMEM;
clks = cc->clks;
data = &cc->data;
data->clks = clks;
data->clk_num = num_clks;
struct device *dev = &pdev->dev;
/* Temporary until RPM clocks supported */
clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000);
......@@ -2756,39 +2730,12 @@ static int gcc_msm8660_probe(struct platform_device *pdev)
if (IS_ERR(clk))
return PTR_ERR(clk);
for (i = 0; i < num_clks; i++) {
if (!gcc_msm8660_clks[i])
continue;
clk = devm_clk_register_regmap(dev, gcc_msm8660_clks[i]);
if (IS_ERR(clk))
return PTR_ERR(clk);
clks[i] = clk;
}
ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data);
if (ret)
return ret;
reset = &cc->reset;
reset->rcdev.of_node = dev->of_node;
reset->rcdev.ops = &qcom_reset_ops,
reset->rcdev.owner = THIS_MODULE,
reset->rcdev.nr_resets = ARRAY_SIZE(gcc_msm8660_resets),
reset->regmap = regmap;
reset->reset_map = gcc_msm8660_resets,
platform_set_drvdata(pdev, &reset->rcdev);
ret = reset_controller_register(&reset->rcdev);
if (ret)
of_clk_del_provider(dev->of_node);
return ret;
return qcom_cc_probe(pdev, &gcc_msm8660_desc);
}
static int gcc_msm8660_remove(struct platform_device *pdev)
{
of_clk_del_provider(pdev->dev.of_node);
reset_controller_unregister(platform_get_drvdata(pdev));
qcom_cc_remove(pdev);
return 0;
}
......
drivers/clk/qcom/gcc-msm8960.c
View file @ dedca6ab
/*
* Copyright (c) 2013, The Linux Foundation. All rights reserved.
* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
......@@ -25,6 +25,7 @@
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include "common.h"
#include "clk-regmap.h"
#include "clk-pll.h"
#include "clk-rcg.h"
......@@ -2809,7 +2810,7 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = {
[PPSS_PROC_RESET] = { 0x2594, 1 },
[PPSS_RESET] = { 0x2594},
[DMA_BAM_RESET] = { 0x25c0, 7 },
[SIC_TIC_RESET] = { 0x2600, 7 },
[SPS_TIC_H_RESET] = { 0x2600, 7 },
[SLIMBUS_H_RESET] = { 0x2620, 7 },
[SFAB_CFPB_M_RESET] = { 0x2680, 7 },
[SFAB_CFPB_S_RESET] = { 0x26c0, 7 },
......@@ -2822,7 +2823,7 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = {
[SFAB_SFPB_M_RESET] = { 0x2780, 7 },
[SFAB_SFPB_S_RESET] = { 0x27a0, 7 },
[RPM_PROC_RESET] = { 0x27c0, 7 },
[PMIC_SSBI2_RESET] = { 0x270c, 12 },
[PMIC_SSBI2_RESET] = { 0x280c, 12 },
[SDC1_RESET] = { 0x2830 },
[SDC2_RESET] = { 0x2850 },
[SDC3_RESET] = { 0x2870 },
......@@ -2867,6 +2868,16 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = {
[RIVA_RESET] = { 0x35e0 },
};
static struct clk_regmap *gcc_apq8064_clks[] = {
[PLL8] = &pll8.clkr,
[PLL8_VOTE] = &pll8_vote,
[GSBI7_UART_SRC] = &gsbi7_uart_src.clkr,
[GSBI7_UART_CLK] = &gsbi7_uart_clk.clkr,
[GSBI7_QUP_SRC] = &gsbi7_qup_src.clkr,
[GSBI7_QUP_CLK] = &gsbi7_qup_clk.clkr,
[GSBI7_H_CLK] = &gsbi7_h_clk.clkr,
};
static const struct regmap_config gcc_msm8960_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
......@@ -2875,51 +2886,38 @@ static const struct regmap_config gcc_msm8960_regmap_config = {
.fast_io = true,
};
static const struct qcom_cc_desc gcc_msm8960_desc = {
.config = &gcc_msm8960_regmap_config,
.clks = gcc_msm8960_clks,
.num_clks = ARRAY_SIZE(gcc_msm8960_clks),
.resets = gcc_msm8960_resets,
.num_resets = ARRAY_SIZE(gcc_msm8960_resets),
};
static const struct qcom_cc_desc gcc_apq8064_desc = {
.config = &gcc_msm8960_regmap_config,
.clks = gcc_apq8064_clks,
.num_clks = ARRAY_SIZE(gcc_apq8064_clks),
.resets = gcc_msm8960_resets,
.num_resets = ARRAY_SIZE(gcc_msm8960_resets),
};
static const struct of_device_id gcc_msm8960_match_table[] = {
{ .compatible = "qcom,gcc-msm8960" },
{ .compatible = "qcom,gcc-msm8960", .data = &gcc_msm8960_desc },
{ .compatible = "qcom,gcc-apq8064", .data = &gcc_apq8064_desc },
{ }
};
MODULE_DEVICE_TABLE(of, gcc_msm8960_match_table);
struct qcom_cc {
struct qcom_reset_controller reset;
struct clk_onecell_data data;
struct clk *clks[];
};
static int gcc_msm8960_probe(struct platform_device *pdev)
{
void __iomem *base;
struct resource *res;
int i, ret;
struct device *dev = &pdev->dev;
struct clk *clk;
struct clk_onecell_data *data;
struct clk **clks;
struct regmap *regmap;
size_t num_clks;
struct qcom_reset_controller *reset;
struct qcom_cc *cc;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
regmap = devm_regmap_init_mmio(dev, base, &gcc_msm8960_regmap_config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
num_clks = ARRAY_SIZE(gcc_msm8960_clks);
cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks,
GFP_KERNEL);
if (!cc)
return -ENOMEM;
clks = cc->clks;
data = &cc->data;
data->clks = clks;
data->clk_num = num_clks;
struct device *dev = &pdev->dev;
const struct of_device_id *match;
match = of_match_device(gcc_msm8960_match_table, &pdev->dev);
if (!match)
return -EINVAL;
/* Temporary until RPM clocks supported */
clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000);
......@@ -2930,39 +2928,12 @@ static int gcc_msm8960_probe(struct platform_device *pdev)
if (IS_ERR(clk))
return PTR_ERR(clk);
for (i = 0; i < num_clks; i++) {
if (!gcc_msm8960_clks[i])
continue;
clk = devm_clk_register_regmap(dev, gcc_msm8960_clks[i]);
if (IS_ERR(clk))
return PTR_ERR(clk);
clks[i] = clk;
}
ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data);
if (ret)
return ret;
reset = &cc->reset;
reset->rcdev.of_node = dev->of_node;
reset->rcdev.ops = &qcom_reset_ops,
reset->rcdev.owner = THIS_MODULE,
reset->rcdev.nr_resets = ARRAY_SIZE(gcc_msm8960_resets),
reset->regmap = regmap;
reset->reset_map = gcc_msm8960_resets,
platform_set_drvdata(pdev, &reset->rcdev);
ret = reset_controller_register(&reset->rcdev);
if (ret)
of_clk_del_provider(dev->of_node);
return ret;
return qcom_cc_probe(pdev, match->data);
}
static int gcc_msm8960_remove(struct platform_device *pdev)
{
of_clk_del_provider(pdev->dev.of_node);
reset_controller_unregister(platform_get_drvdata(pdev));
qcom_cc_remove(pdev);
return 0;
}
......
drivers/clk/qcom/gcc-msm8974.c
View file @ dedca6ab
......@@ -25,6 +25,7 @@
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
#include <dt-bindings/reset/qcom,gcc-msm8974.h>
#include "common.h"
#include "clk-regmap.h"
#include "clk-pll.h"
#include "clk-rcg.h"
......@@ -2574,51 +2575,24 @@ static const struct regmap_config gcc_msm8974_regmap_config = {
.fast_io = true,
};
static const struct qcom_cc_desc gcc_msm8974_desc = {
.config = &gcc_msm8974_regmap_config,
.clks = gcc_msm8974_clocks,
.num_clks = ARRAY_SIZE(gcc_msm8974_clocks),
.resets = gcc_msm8974_resets,
.num_resets = ARRAY_SIZE(gcc_msm8974_resets),
};
static const struct of_device_id gcc_msm8974_match_table[] = {
{ .compatible = "qcom,gcc-msm8974" },
{ }
};
MODULE_DEVICE_TABLE(of, gcc_msm8974_match_table);
struct qcom_cc {
struct qcom_reset_controller reset;
struct clk_onecell_data data;
struct clk *clks[];
};
static int gcc_msm8974_probe(struct platform_device *pdev)
{
void __iomem *base;
struct resource *res;
int i, ret;
struct device *dev = &pdev->dev;
struct clk *clk;
struct clk_onecell_data *data;
struct clk **clks;
struct regmap *regmap;
size_t num_clks;
struct qcom_reset_controller *reset;
struct qcom_cc *cc;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
regmap = devm_regmap_init_mmio(dev, base, &gcc_msm8974_regmap_config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
num_clks = ARRAY_SIZE(gcc_msm8974_clocks);
cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks,
GFP_KERNEL);
if (!cc)
return -ENOMEM;
clks = cc->clks;
data = &cc->data;
data->clks = clks;
data->clk_num = num_clks;
struct device *dev = &pdev->dev;
/* Temporary until RPM clocks supported */
clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000);
......@@ -2631,39 +2605,12 @@ static int gcc_msm8974_probe(struct platform_device *pdev)
if (IS_ERR(clk))
return PTR_ERR(clk);
for (i = 0; i < num_clks; i++) {
if (!gcc_msm8974_clocks[i])
continue;
clk = devm_clk_register_regmap(dev, gcc_msm8974_clocks[i]);
if (IS_ERR(clk))
return PTR_ERR(clk);
clks[i] = clk;
}
ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data);
if (ret)
return ret;
reset = &cc->reset;
reset->rcdev.of_node = dev->of_node;
reset->rcdev.ops = &qcom_reset_ops,
reset->rcdev.owner = THIS_MODULE,
reset->rcdev.nr_resets = ARRAY_SIZE(gcc_msm8974_resets),
reset->regmap = regmap;
reset->reset_map = gcc_msm8974_resets,
platform_set_drvdata(pdev, &reset->rcdev);
ret = reset_controller_register(&reset->rcdev);
if (ret)
of_clk_del_provider(dev->of_node);
return ret;
return qcom_cc_probe(pdev, &gcc_msm8974_desc);
}
static int gcc_msm8974_remove(struct platform_device *pdev)
{
of_clk_del_provider(pdev->dev.of_node);
reset_controller_unregister(platform_get_drvdata(pdev));
qcom_cc_remove(pdev);
return 0;
}
......
drivers/clk/qcom/mmcc-msm8960.c
View file @ dedca6ab
......@@ -26,6 +26,7 @@
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
#include <dt-bindings/reset/qcom,mmcc-msm8960.h>
#include "common.h"
#include "clk-regmap.h"
#include "clk-pll.h"
#include "clk-rcg.h"
......@@ -2222,85 +2223,28 @@ static const struct regmap_config mmcc_msm8960_regmap_config = {
.fast_io = true,
};
static const struct qcom_cc_desc mmcc_msm8960_desc = {
.config = &mmcc_msm8960_regmap_config,
.clks = mmcc_msm8960_clks,
.num_clks = ARRAY_SIZE(mmcc_msm8960_clks),
.resets = mmcc_msm8960_resets,
.num_resets = ARRAY_SIZE(mmcc_msm8960_resets),
};
static const struct of_device_id mmcc_msm8960_match_table[] = {
{ .compatible = "qcom,mmcc-msm8960" },
{ }
};
MODULE_DEVICE_TABLE(of, mmcc_msm8960_match_table);
struct qcom_cc {
struct qcom_reset_controller reset;
struct clk_onecell_data data;
struct clk *clks[];
};
static int mmcc_msm8960_probe(struct platform_device *pdev)
{
void __iomem *base;
struct resource *res;
int i, ret;
struct device *dev = &pdev->dev;
struct clk *clk;
struct clk_onecell_data *data;
struct clk **clks;
struct regmap *regmap;
size_t num_clks;
struct qcom_reset_controller *reset;
struct qcom_cc *cc;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
regmap = devm_regmap_init_mmio(dev, base, &mmcc_msm8960_regmap_config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
num_clks = ARRAY_SIZE(mmcc_msm8960_clks);
cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks,
GFP_KERNEL);
if (!cc)
return -ENOMEM;
clks = cc->clks;
data = &cc->data;
data->clks = clks;
data->clk_num = num_clks;
for (i = 0; i < num_clks; i++) {
if (!mmcc_msm8960_clks[i])
continue;
clk = devm_clk_register_regmap(dev, mmcc_msm8960_clks[i]);
if (IS_ERR(clk))
return PTR_ERR(clk);
clks[i] = clk;
}
ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data);
if (ret)
return ret;
reset = &cc->reset;
reset->rcdev.of_node = dev->of_node;
reset->rcdev.ops = &qcom_reset_ops,
reset->rcdev.owner = THIS_MODULE,
reset->rcdev.nr_resets = ARRAY_SIZE(mmcc_msm8960_resets),
reset->regmap = regmap;
reset->reset_map = mmcc_msm8960_resets,
platform_set_drvdata(pdev, &reset->rcdev);
ret = reset_controller_register(&reset->rcdev);
if (ret)
of_clk_del_provider(dev->of_node);
return ret;
return qcom_cc_probe(pdev, &mmcc_msm8960_desc);
}
static int mmcc_msm8960_remove(struct platform_device *pdev)
{
of_clk_del_provider(pdev->dev.of_node);
reset_controller_unregister(platform_get_drvdata(pdev));
qcom_cc_remove(pdev);
return 0;
}
......
drivers/clk/qcom/mmcc-msm8974.c
View file @ dedca6ab
......@@ -25,6 +25,7 @@
#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
#include <dt-bindings/reset/qcom,mmcc-msm8974.h>
#include "common.h"
#include "clk-regmap.h"
#include "clk-pll.h"
#include "clk-rcg.h"
......@@ -2524,88 +2525,39 @@ static const struct regmap_config mmcc_msm8974_regmap_config = {
.fast_io = true,
};
static const struct qcom_cc_desc mmcc_msm8974_desc = {
.config = &mmcc_msm8974_regmap_config,
.clks = mmcc_msm8974_clocks,
.num_clks = ARRAY_SIZE(mmcc_msm8974_clocks),
.resets = mmcc_msm8974_resets,
.num_resets = ARRAY_SIZE(mmcc_msm8974_resets),
};
static const struct of_device_id mmcc_msm8974_match_table[] = {
{ .compatible = "qcom,mmcc-msm8974" },
{ }
};
MODULE_DEVICE_TABLE(of, mmcc_msm8974_match_table);
struct qcom_cc {
struct qcom_reset_controller reset;
struct clk_onecell_data data;
struct clk *clks[];
};
static int mmcc_msm8974_probe(struct platform_device *pdev)
{
void __iomem *base;
struct resource *res;
int i, ret;
struct device *dev = &pdev->dev;
struct clk *clk;
struct clk_onecell_data *data;
struct clk **clks;
int ret;
struct regmap *regmap;
size_t num_clks;
struct qcom_reset_controller *reset;
struct qcom_cc *cc;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
regmap = devm_regmap_init_mmio(dev, base, &mmcc_msm8974_regmap_config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
num_clks = ARRAY_SIZE(mmcc_msm8974_clocks);
cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks,
GFP_KERNEL);
if (!cc)
return -ENOMEM;
clks = cc->clks;
data = &cc->data;
data->clks = clks;
data->clk_num = num_clks;
clk_pll_configure_sr_hpm_lp(&mmpll1, regmap, &mmpll1_config, true);
clk_pll_configure_sr_hpm_lp(&mmpll3, regmap, &mmpll3_config, false);
for (i = 0; i < num_clks; i++) {
if (!mmcc_msm8974_clocks[i])
continue;
clk = devm_clk_register_regmap(dev, mmcc_msm8974_clocks[i]);
if (IS_ERR(clk))
return PTR_ERR(clk);
clks[i] = clk;
}
ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data);
ret = qcom_cc_probe(pdev, &mmcc_msm8974_desc);
if (ret)
return ret;
reset = &cc->reset;
reset->rcdev.of_node = dev->of_node;
reset->rcdev.ops = &qcom_reset_ops,
reset->rcdev.owner = THIS_MODULE,
reset->rcdev.nr_resets = ARRAY_SIZE(mmcc_msm8974_resets),
reset->regmap = regmap;
reset->reset_map = mmcc_msm8974_resets,
platform_set_drvdata(pdev, &reset->rcdev);
ret = reset_controller_register(&reset->rcdev);
if (ret)
of_clk_del_provider(dev->of_node);
regmap = dev_get_regmap(&pdev->dev, NULL);
clk_pll_configure_sr_hpm_lp(&mmpll1, regmap, &mmpll1_config, true);
clk_pll_configure_sr_hpm_lp(&mmpll3, regmap, &mmpll3_config, false);
return ret;
return 0;
}
static int mmcc_msm8974_remove(struct platform_device *pdev)
{
of_clk_del_provider(pdev->dev.of_node);
reset_controller_unregister(platform_get_drvdata(pdev));
qcom_cc_remove(pdev);
return 0;
}
......
drivers/clk/shmobile/Makefile
View file @ dedca6ab
obj-$(CONFIG_ARCH_EMEV2) += clk-emev2.o
obj-$(CONFIG_ARCH_R7S72100) += clk-rz.o
obj-$(CONFIG_ARCH_R8A7740) += clk-r8a7740.o
obj-$(CONFIG_ARCH_R8A7779) += clk-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o
obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o
obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-div6.o
......
drivers/clk/shmobile/clk-mstp.c
View file @ dedca6ab
......@@ -112,7 +112,7 @@ static int cpg_mstp_clock_is_enabled(struct clk_hw *hw)
else
value = clk_readl(group->smstpcr);
return !!(value & BIT(clock->bit_index));
return !(value & BIT(clock->bit_index));
}
static const struct clk_ops cpg_mstp_clock_ops = {
......
drivers/clk/shmobile/clk-r8a7740.c 0 → 100644
View file @ dedca6ab
/*
* r8a7740 Core CPG Clocks
*
* Copyright (C) 2014 Ulrich Hecht
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*/
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/clk/shmobile.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/spinlock.h>
struct r8a7740_cpg {
struct clk_onecell_data data;
spinlock_t lock;
void __iomem *reg;
};
#define CPG_FRQCRA 0x00
#define CPG_FRQCRB 0x04
#define CPG_PLLC2CR 0x2c
#define CPG_USBCKCR 0x8c
#define CPG_FRQCRC 0xe0
#define CLK_ENABLE_ON_INIT BIT(0)
struct div4_clk {
const char *name;
unsigned int reg;
unsigned int shift;
int flags;
};
static struct div4_clk div4_clks[] = {
{ "i", CPG_FRQCRA, 20, CLK_ENABLE_ON_INIT },
{ "zg", CPG_FRQCRA, 16, CLK_ENABLE_ON_INIT },
{ "b", CPG_FRQCRA, 8, CLK_ENABLE_ON_INIT },
{ "m1", CPG_FRQCRA, 4, CLK_ENABLE_ON_INIT },
{ "hp", CPG_FRQCRB, 4, 0 },
{ "hpp", CPG_FRQCRC, 20, 0 },
{ "usbp", CPG_FRQCRC, 16, 0 },
{ "s", CPG_FRQCRC, 12, 0 },
{ "zb", CPG_FRQCRC, 8, 0 },
{ "m3", CPG_FRQCRC, 4, 0 },
{ "cp", CPG_FRQCRC, 0, 0 },
{ NULL, 0, 0, 0 },
};
static const struct clk_div_table div4_div_table[] = {
{ 0, 2 }, { 1, 3 }, { 2, 4 }, { 3, 6 }, { 4, 8 }, { 5, 12 },
{ 6, 16 }, { 7, 18 }, { 8, 24 }, { 9, 32 }, { 10, 36 }, { 11, 48 },
{ 13, 72 }, { 14, 96 }, { 0, 0 }
};
static u32 cpg_mode __initdata;
static struct clk * __init
r8a7740_cpg_register_clock(struct device_node *np, struct r8a7740_cpg *cpg,
const char *name)
{
const struct clk_div_table *table = NULL;
const char *parent_name;
unsigned int shift, reg;
unsigned int mult = 1;
unsigned int div = 1;
if (!strcmp(name, "r")) {
switch (cpg_mode & (BIT(2) | BIT(1))) {
case BIT(1) | BIT(2):
/* extal1 */
parent_name = of_clk_get_parent_name(np, 0);
div = 2048;
break;
case BIT(2):
/* extal1 */
parent_name = of_clk_get_parent_name(np, 0);
div = 1024;
break;
default:
/* extalr */
parent_name = of_clk_get_parent_name(np, 2);
break;
}
} else if (!strcmp(name, "system")) {
parent_name = of_clk_get_parent_name(np, 0);
if (cpg_mode & BIT(1))
div = 2;
} else if (!strcmp(name, "pllc0")) {
/* PLLC0/1 are configurable multiplier clocks. Register them as
* fixed factor clocks for now as there's no generic multiplier
* clock implementation and we currently have no need to change
* the multiplier value.
*/
u32 value = clk_readl(cpg->reg + CPG_FRQCRC);
parent_name = "system";
mult = ((value >> 24) & 0x7f) + 1;
} else if (!strcmp(name, "pllc1")) {
u32 value = clk_readl(cpg->reg + CPG_FRQCRA);
parent_name = "system";
mult = ((value >> 24) & 0x7f) + 1;
div = 2;
} else if (!strcmp(name, "pllc2")) {
u32 value = clk_readl(cpg->reg + CPG_PLLC2CR);
parent_name = "system";
mult = ((value >> 24) & 0x3f) + 1;
} else if (!strcmp(name, "usb24s")) {
u32 value = clk_readl(cpg->reg + CPG_USBCKCR);
if (value & BIT(7))
/* extal2 */
parent_name = of_clk_get_parent_name(np, 1);
else
parent_name = "system";
if (!(value & BIT(6)))
div = 2;
} else {
struct div4_clk *c;
for (c = div4_clks; c->name; c++) {
if (!strcmp(name, c->name)) {
parent_name = "pllc1";
table = div4_div_table;
reg = c->reg;
shift = c->shift;
break;
}
}
if (!c->name)
return ERR_PTR(-EINVAL);
}
if (!table) {
return clk_register_fixed_factor(NULL, name, parent_name, 0,
mult, div);
} else {
return clk_register_divider_table(NULL, name, parent_name, 0,
cpg->reg + reg, shift, 4, 0,
table, &cpg->lock);
}
}
static void __init r8a7740_cpg_clocks_init(struct device_node *np)
{
struct r8a7740_cpg *cpg;
struct clk **clks;
unsigned int i;
int num_clks;
if (of_property_read_u32(np, "renesas,mode", &cpg_mode))
pr_warn("%s: missing renesas,mode property\n", __func__);
num_clks = of_property_count_strings(np, "clock-output-names");
if (num_clks < 0) {
pr_err("%s: failed to count clocks\n", __func__);
return;
}
cpg = kzalloc(sizeof(*cpg), GFP_KERNEL);
clks = kzalloc(num_clks * sizeof(*clks), GFP_KERNEL);
if (cpg == NULL || clks == NULL) {
/* We're leaking memory on purpose, there's no point in cleaning
* up as the system won't boot anyway.
*/
return;
}
spin_lock_init(&cpg->lock);
cpg->data.clks = clks;
cpg->data.clk_num = num_clks;
cpg->reg = of_iomap(np, 0);
if (WARN_ON(cpg->reg == NULL))
return;
for (i = 0; i < num_clks; ++i) {
const char *name;
struct clk *clk;
of_property_read_string_index(np, "clock-output-names", i,
&name);
clk = r8a7740_cpg_register_clock(np, cpg, name);
if (IS_ERR(clk))
pr_err("%s: failed to register %s %s clock (%ld)\n",
__func__, np->name, name, PTR_ERR(clk));
else
cpg->data.clks[i] = clk;
}
of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data);
}
CLK_OF_DECLARE(r8a7740_cpg_clks, "renesas,r8a7740-cpg-clocks",
r8a7740_cpg_clocks_init);
drivers/clk/shmobile/clk-r8a7779.c 0 → 100644
View file @ dedca6ab
/*
* r8a7779 Core CPG Clocks
*
* Copyright (C) 2013, 2014 Horms Solutions Ltd.
*
* Contact: Simon Horman <horms@verge.net.au>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*/
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/clk/shmobile.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/spinlock.h>
#include <dt-bindings/clock/r8a7779-clock.h>
#define CPG_NUM_CLOCKS (R8A7779_CLK_OUT + 1)
struct r8a7779_cpg {
struct clk_onecell_data data;
spinlock_t lock;
void __iomem *reg;
};
/* -----------------------------------------------------------------------------
* CPG Clock Data
*/
/*
* MD1 = 1 MD1 = 0
* (PLLA = 1500) (PLLA = 1600)
* (MHz) (MHz)
*------------------------------------------------+--------------------
* clkz 1000 (2/3) 800 (1/2)
* clkzs 250 (1/6) 200 (1/8)
* clki 750 (1/2) 800 (1/2)
* clks 250 (1/6) 200 (1/8)
* clks1 125 (1/12) 100 (1/16)
* clks3 187.5 (1/8) 200 (1/8)
* clks4 93.7 (1/16) 100 (1/16)
* clkp 62.5 (1/24) 50 (1/32)
* clkg 62.5 (1/24) 66.6 (1/24)
* clkb, CLKOUT
* (MD2 = 0) 62.5 (1/24) 66.6 (1/24)
* (MD2 = 1) 41.6 (1/36) 50 (1/32)
*/
#define CPG_CLK_CONFIG_INDEX(md) (((md) & (BIT(2)|BIT(1))) >> 1)
struct cpg_clk_config {
unsigned int z_mult;
unsigned int z_div;
unsigned int zs_and_s_div;
unsigned int s1_div;
unsigned int p_div;
unsigned int b_and_out_div;
};
static const struct cpg_clk_config cpg_clk_configs[4] __initconst = {
{ 1, 2, 8, 16, 32, 24 },
{ 2, 3, 6, 12, 24, 24 },
{ 1, 2, 8, 16, 32, 32 },
{ 2, 3, 6, 12, 24, 36 },
};
/*
* MD PLLA Ratio
* 12 11
*------------------------
* 0 0 x42
* 0 1 x48
* 1 0 x56
* 1 1 x64
*/
#define CPG_PLLA_MULT_INDEX(md) (((md) & (BIT(12)|BIT(11))) >> 11)
static const unsigned int cpg_plla_mult[4] __initconst = { 42, 48, 56, 64 };
/* -----------------------------------------------------------------------------
* Initialization
*/
static u32 cpg_mode __initdata;
static struct clk * __init
r8a7779_cpg_register_clock(struct device_node *np, struct r8a7779_cpg *cpg,
const struct cpg_clk_config *config,
unsigned int plla_mult, const char *name)
{
const char *parent_name = "plla";
unsigned int mult = 1;
unsigned int div = 1;
if (!strcmp(name, "plla")) {
parent_name = of_clk_get_parent_name(np, 0);
mult = plla_mult;
} else if (!strcmp(name, "z")) {
div = config->z_div;
mult = config->z_mult;
} else if (!strcmp(name, "zs") || !strcmp(name, "s")) {
div = config->zs_and_s_div;
} else if (!strcmp(name, "s1")) {
div = config->s1_div;
} else if (!strcmp(name, "p")) {
div = config->p_div;
} else if (!strcmp(name, "b") || !strcmp(name, "out")) {
div = config->b_and_out_div;
} else {
return ERR_PTR(-EINVAL);
}
return clk_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
}
static void __init r8a7779_cpg_clocks_init(struct device_node *np)
{
const struct cpg_clk_config *config;
struct r8a7779_cpg *cpg;
struct clk **clks;
unsigned int i, plla_mult;
int num_clks;
num_clks = of_property_count_strings(np, "clock-output-names");
if (num_clks < 0) {
pr_err("%s: failed to count clocks\n", __func__);
return;
}
cpg = kzalloc(sizeof(*cpg), GFP_KERNEL);
clks = kzalloc(CPG_NUM_CLOCKS * sizeof(*clks), GFP_KERNEL);
if (cpg == NULL || clks == NULL) {
/* We're leaking memory on purpose, there's no point in cleaning
* up as the system won't boot anyway.
*/
return;
}
spin_lock_init(&cpg->lock);
cpg->data.clks = clks;
cpg->data.clk_num = num_clks;
config = &cpg_clk_configs[CPG_CLK_CONFIG_INDEX(cpg_mode)];
plla_mult = cpg_plla_mult[CPG_PLLA_MULT_INDEX(cpg_mode)];
for (i = 0; i < num_clks; ++i) {
const char *name;
struct clk *clk;
of_property_read_string_index(np, "clock-output-names", i,
&name);
clk = r8a7779_cpg_register_clock(np, cpg, config,
plla_mult, name);
if (IS_ERR(clk))
pr_err("%s: failed to register %s %s clock (%ld)\n",
__func__, np->name, name, PTR_ERR(clk));
else
cpg->data.clks[i] = clk;
}
of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data);
}
CLK_OF_DECLARE(r8a7779_cpg_clks, "renesas,r8a7779-cpg-clocks",
r8a7779_cpg_clocks_init);
void __init r8a7779_clocks_init(u32 mode)
{
cpg_mode = mode;
of_clk_init(NULL);
}
drivers/clk/socfpga/clk-gate.c
View file @ dedca6ab
......@@ -32,7 +32,6 @@
#define SOCFPGA_MMC_CLK "sdmmc_clk"
#define SOCFPGA_GPIO_DB_CLK_OFFSET 0xA8
#define div_mask(width) ((1 << (width)) - 1)
#define streq(a, b) (strcmp((a), (b)) == 0)
#define to_socfpga_gate_clk(p) container_of(p, struct socfpga_gate_clk, hw.hw)
......
drivers/clk/socfpga/clk-periph.c
View file @ dedca6ab
......@@ -29,12 +29,18 @@ static unsigned long clk_periclk_recalc_rate(struct clk_hw *hwclk,
unsigned long parent_rate)
{
struct socfpga_periph_clk *socfpgaclk = to_socfpga_periph_clk(hwclk);
u32 div;
u32 div, val;
if (socfpgaclk->fixed_div)
if (socfpgaclk->fixed_div) {
div = socfpgaclk->fixed_div;
else
} else {
if (socfpgaclk->div_reg) {
val = readl(socfpgaclk->div_reg) >> socfpgaclk->shift;
val &= div_mask(socfpgaclk->width);
parent_rate /= (val + 1);
}
div = ((readl(socfpgaclk->hw.reg) & 0x1ff) + 1);
}
return parent_rate / div;
}
......@@ -54,6 +60,7 @@ static __init void __socfpga_periph_init(struct device_node *node,
struct clk_init_data init;
int rc;
u32 fixed_div;
u32 div_reg[3];
of_property_read_u32(node, "reg", &reg);
......@@ -63,6 +70,15 @@ static __init void __socfpga_periph_init(struct device_node *node,
periph_clk->hw.reg = clk_mgr_base_addr + reg;
rc = of_property_read_u32_array(node, "div-reg", div_reg, 3);
if (!rc) {
periph_clk->div_reg = clk_mgr_base_addr + div_reg[0];
periph_clk->shift = div_reg[1];
periph_clk->width = div_reg[2];
} else {
periph_clk->div_reg = 0;
}
rc = of_property_read_u32(node, "fixed-divider", &fixed_div);
if (rc)
periph_clk->fixed_div = 0;
......
drivers/clk/socfpga/clk.h
View file @ dedca6ab
......@@ -27,6 +27,7 @@
#define CLKMGR_PERPLL_SRC 0xAC
#define SOCFPGA_MAX_PARENTS 3
#define div_mask(width) ((1 << (width)) - 1)
extern void __iomem *clk_mgr_base_addr;
......@@ -52,6 +53,9 @@ struct socfpga_periph_clk {
struct clk_gate hw;
char *parent_name;
u32 fixed_div;
void __iomem *div_reg;
u32 width; /* only valid if div_reg != 0 */
u32 shift; /* only valid if div_reg != 0 */
};
#endif /* SOCFPGA_CLK_H */
drivers/clk/sunxi/clk-factors.c
View file @ dedca6ab
......@@ -77,6 +77,41 @@ static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate,
return rate;
}
static long clk_factors_determine_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *best_parent_rate,
struct clk **best_parent_p)
{
struct clk *clk = hw->clk, *parent, *best_parent = NULL;
int i, num_parents;
unsigned long parent_rate, best = 0, child_rate, best_child_rate = 0;
/* find the parent that can help provide the fastest rate <= rate */
num_parents = __clk_get_num_parents(clk);
for (i = 0; i < num_parents; i++) {
parent = clk_get_parent_by_index(clk, i);
if (!parent)
continue;
if (__clk_get_flags(clk) & CLK_SET_RATE_PARENT)
parent_rate = __clk_round_rate(parent, rate);
else
parent_rate = __clk_get_rate(parent);
child_rate = clk_factors_round_rate(hw, rate, &parent_rate);
if (child_rate <= rate && child_rate > best_child_rate) {
best_parent = parent;
best = parent_rate;
best_child_rate = child_rate;
}
}
if (best_parent)
*best_parent_p = best_parent;
*best_parent_rate = best;
return best_child_rate;
}
static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
......@@ -113,6 +148,7 @@ static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
}
const struct clk_ops clk_factors_ops = {
.determine_rate = clk_factors_determine_rate,
.recalc_rate = clk_factors_recalc_rate,
.round_rate = clk_factors_round_rate,
.set_rate = clk_factors_set_rate,
......
drivers/clk/sunxi/clk-sunxi.c
View file @ dedca6ab
......@@ -506,6 +506,43 @@ CLK_OF_DECLARE(sun7i_a20_gmac, "allwinner,sun7i-a20-gmac-clk",
/**
* clk_sunxi_mmc_phase_control() - configures MMC clock phase control
*/
void clk_sunxi_mmc_phase_control(struct clk *clk, u8 sample, u8 output)
{
#define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw)
#define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw)
struct clk_hw *hw = __clk_get_hw(clk);
struct clk_composite *composite = to_clk_composite(hw);
struct clk_hw *rate_hw = composite->rate_hw;
struct clk_factors *factors = to_clk_factors(rate_hw);
unsigned long flags = 0;
u32 reg;
if (factors->lock)
spin_lock_irqsave(factors->lock, flags);
reg = readl(factors->reg);
/* set sample clock phase control */
reg &= ~(0x7 << 20);
reg |= ((sample & 0x7) << 20);
/* set output clock phase control */
reg &= ~(0x7 << 8);
reg |= ((output & 0x7) << 8);
writel(reg, factors->reg);
if (factors->lock)
spin_unlock_irqrestore(factors->lock, flags);
}
EXPORT_SYMBOL(clk_sunxi_mmc_phase_control);
/**
* sunxi_factors_clk_setup() - Setup function for factor clocks
*/
......
drivers/clk/tegra/clk-id.h
View file @ dedca6ab
......@@ -233,6 +233,7 @@ enum clk_id {
tegra_clk_xusb_hs_src,
tegra_clk_xusb_ss,
tegra_clk_xusb_ss_src,
tegra_clk_xusb_ss_div2,
tegra_clk_max,
};
......
drivers/clk/tegra/clk-pll.c
View file @ dedca6ab
......@@ -96,10 +96,20 @@
(PLLE_SS_MAX_VAL | PLLE_SS_INC_VAL | PLLE_SS_INCINTRV_VAL)
#define PLLE_AUX_PLLP_SEL BIT(2)
#define PLLE_AUX_USE_LOCKDET BIT(3)
#define PLLE_AUX_ENABLE_SWCTL BIT(4)
#define PLLE_AUX_SS_SWCTL BIT(6)
#define PLLE_AUX_SEQ_ENABLE BIT(24)
#define PLLE_AUX_SEQ_START_STATE BIT(25)
#define PLLE_AUX_PLLRE_SEL BIT(28)
#define XUSBIO_PLL_CFG0 0x51c
#define XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL BIT(0)
#define XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL BIT(2)
#define XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET BIT(6)
#define XUSBIO_PLL_CFG0_SEQ_ENABLE BIT(24)
#define XUSBIO_PLL_CFG0_SEQ_START_STATE BIT(25)
#define PLLE_MISC_PLLE_PTS BIT(8)
#define PLLE_MISC_IDDQ_SW_VALUE BIT(13)
#define PLLE_MISC_IDDQ_SW_CTRL BIT(14)
......@@ -1318,7 +1328,28 @@ static int clk_plle_tegra114_enable(struct clk_hw *hw)
pll_writel(val, PLLE_SS_CTRL, pll);
udelay(1);
/* TODO: enable hw control of xusb brick pll */
/* Enable hw control of xusb brick pll */
val = pll_readl_misc(pll);
val &= ~PLLE_MISC_IDDQ_SW_CTRL;
pll_writel_misc(val, pll);
val = pll_readl(pll->params->aux_reg, pll);
val |= (PLLE_AUX_USE_LOCKDET | PLLE_AUX_SEQ_START_STATE);
val &= ~(PLLE_AUX_ENABLE_SWCTL | PLLE_AUX_SS_SWCTL);
pll_writel(val, pll->params->aux_reg, pll);
udelay(1);
val |= PLLE_AUX_SEQ_ENABLE;
pll_writel(val, pll->params->aux_reg, pll);
val = pll_readl(XUSBIO_PLL_CFG0, pll);
val |= (XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET |
XUSBIO_PLL_CFG0_SEQ_START_STATE);
val &= ~(XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL |
XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL);
pll_writel(val, XUSBIO_PLL_CFG0, pll);
udelay(1);
val |= XUSBIO_PLL_CFG0_SEQ_ENABLE;
pll_writel(val, XUSBIO_PLL_CFG0, pll);
out:
if (pll->lock)
......
drivers/clk/tegra/clk-tegra-periph.c
View file @ dedca6ab
......@@ -329,7 +329,9 @@ static u32 mux_clkm_pllp_pllc_pllre_idx[] = {
static const char *mux_clkm_48M_pllp_480M[] = {
"clk_m", "pll_u_48M", "pll_p", "pll_u_480M"
};
#define mux_clkm_48M_pllp_480M_idx NULL
static u32 mux_clkm_48M_pllp_480M_idx[] = {
[0] = 0, [1] = 2, [2] = 4, [3] = 6,
};
static const char *mux_clkm_pllre_clk32_480M_pllc_ref[] = {
"clk_m", "pll_re_out", "clk_32k", "pll_u_480M", "pll_c", "pll_ref"
......@@ -338,6 +340,11 @@ static u32 mux_clkm_pllre_clk32_480M_pllc_ref_idx[] = {
[0] = 0, [1] = 1, [2] = 3, [3] = 3, [4] = 4, [5] = 7,
};
static const char *mux_ss_60M[] = {
"xusb_ss_div2", "pll_u_60M"
};
#define mux_ss_60M_idx NULL
static const char *mux_d_audio_clk[] = {
"pll_a_out0", "pll_p", "clk_m", "spdif_in_sync", "i2s0_sync",
"i2s1_sync", "i2s2_sync", "i2s3_sync", "i2s4_sync", "vimclk_sync",
......@@ -499,6 +506,7 @@ static struct tegra_periph_init_data periph_clks[] = {
XUSB("xusb_falcon_src", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_FALCON_SRC, 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_falcon_src),
XUSB("xusb_fs_src", mux_clkm_48M_pllp_480M, CLK_SOURCE_XUSB_FS_SRC, 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_fs_src),
XUSB("xusb_ss_src", mux_clkm_pllre_clk32_480M_pllc_ref, CLK_SOURCE_XUSB_SS_SRC, 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_ss_src),
NODIV("xusb_hs_src", mux_ss_60M, CLK_SOURCE_XUSB_SS_SRC, 25, MASK(1), 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_hs_src, NULL),
XUSB("xusb_dev_src", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_DEV_SRC, 95, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_dev_src),
};
......
drivers/clk/tegra/clk-tegra114.c
View file @ dedca6ab
......@@ -142,7 +142,6 @@
#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0)
#define CLK_SOURCE_CSITE 0x1d4
#define CLK_SOURCE_XUSB_SS_SRC 0x610
#define CLK_SOURCE_EMC 0x19c
/* PLLM override registers */
......@@ -834,6 +833,7 @@ static struct tegra_clk tegra114_clks[tegra_clk_max] __initdata = {
[tegra_clk_xusb_falcon_src] = { .dt_id = TEGRA114_CLK_XUSB_FALCON_SRC, .present = true },
[tegra_clk_xusb_fs_src] = { .dt_id = TEGRA114_CLK_XUSB_FS_SRC, .present = true },
[tegra_clk_xusb_ss_src] = { .dt_id = TEGRA114_CLK_XUSB_SS_SRC, .present = true },
[tegra_clk_xusb_ss_div2] = { .dt_id = TEGRA114_CLK_XUSB_SS_DIV2, .present = true},
[tegra_clk_xusb_dev_src] = { .dt_id = TEGRA114_CLK_XUSB_DEV_SRC, .present = true },
[tegra_clk_xusb_dev] = { .dt_id = TEGRA114_CLK_XUSB_DEV, .present = true },
[tegra_clk_xusb_hs_src] = { .dt_id = TEGRA114_CLK_XUSB_HS_SRC, .present = true },
......@@ -1182,16 +1182,11 @@ static __init void tegra114_periph_clk_init(void __iomem *clk_base,
void __iomem *pmc_base)
{
struct clk *clk;
u32 val;
/* xusb_hs_src */
val = readl(clk_base + CLK_SOURCE_XUSB_SS_SRC);
val |= BIT(25); /* always select PLLU_60M */
writel(val, clk_base + CLK_SOURCE_XUSB_SS_SRC);
clk = clk_register_fixed_factor(NULL, "xusb_hs_src", "pll_u_60M", 0,
1, 1);
clks[TEGRA114_CLK_XUSB_HS_SRC] = clk;
/* xusb_ss_div2 */
clk = clk_register_fixed_factor(NULL, "xusb_ss_div2", "xusb_ss_src", 0,
1, 2);
clks[TEGRA114_CLK_XUSB_SS_DIV2] = clk;
/* dsia mux */
clk = clk_register_mux(NULL, "dsia_mux", mux_plld_out0_plld2_out0,
......@@ -1301,7 +1296,12 @@ static struct tegra_clk_init_table init_table[] __initdata = {
{TEGRA114_CLK_GR3D, TEGRA114_CLK_PLL_C2, 300000000, 0},
{TEGRA114_CLK_DSIALP, TEGRA114_CLK_PLL_P, 68000000, 0},
{TEGRA114_CLK_DSIBLP, TEGRA114_CLK_PLL_P, 68000000, 0},
{TEGRA114_CLK_PLL_RE_VCO, TEGRA114_CLK_CLK_MAX, 612000000, 0},
{TEGRA114_CLK_XUSB_SS_SRC, TEGRA114_CLK_PLL_RE_OUT, 122400000, 0},
{TEGRA114_CLK_XUSB_FS_SRC, TEGRA114_CLK_PLL_U_48M, 48000000, 0},
{TEGRA114_CLK_XUSB_HS_SRC, TEGRA114_CLK_XUSB_SS_DIV2, 61200000, 0},
{TEGRA114_CLK_XUSB_FALCON_SRC, TEGRA114_CLK_PLL_P, 204000000, 0},
{TEGRA114_CLK_XUSB_HOST_SRC, TEGRA114_CLK_PLL_P, 102000000, 0},
/* This MUST be the last entry. */
{TEGRA114_CLK_CLK_MAX, TEGRA114_CLK_CLK_MAX, 0, 0},
};
......
drivers/clk/tegra/clk-tegra124.c
View file @ dedca6ab
......@@ -30,7 +30,6 @@
#define CLK_SOURCE_CSITE 0x1d4
#define CLK_SOURCE_EMC 0x19c
#define CLK_SOURCE_XUSB_SS_SRC 0x610
#define PLLC_BASE 0x80
#define PLLC_OUT 0x84
......@@ -925,6 +924,7 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
[tegra_clk_xusb_falcon_src] = { .dt_id = TEGRA124_CLK_XUSB_FALCON_SRC, .present = true },
[tegra_clk_xusb_fs_src] = { .dt_id = TEGRA124_CLK_XUSB_FS_SRC, .present = true },
[tegra_clk_xusb_ss_src] = { .dt_id = TEGRA124_CLK_XUSB_SS_SRC, .present = true },
[tegra_clk_xusb_ss_div2] = { .dt_id = TEGRA124_CLK_XUSB_SS_DIV2, .present = true },
[tegra_clk_xusb_dev_src] = { .dt_id = TEGRA124_CLK_XUSB_DEV_SRC, .present = true },
[tegra_clk_xusb_dev] = { .dt_id = TEGRA124_CLK_XUSB_DEV, .present = true },
[tegra_clk_xusb_hs_src] = { .dt_id = TEGRA124_CLK_XUSB_HS_SRC, .present = true },
......@@ -1105,16 +1105,11 @@ static __init void tegra124_periph_clk_init(void __iomem *clk_base,
void __iomem *pmc_base)
{
struct clk *clk;
u32 val;
/* xusb_hs_src */
val = readl(clk_base + CLK_SOURCE_XUSB_SS_SRC);
val |= BIT(25); /* always select PLLU_60M */
writel(val, clk_base + CLK_SOURCE_XUSB_SS_SRC);
clk = clk_register_fixed_factor(NULL, "xusb_hs_src", "pll_u_60M", 0,
1, 1);
clks[TEGRA124_CLK_XUSB_HS_SRC] = clk;
/* xusb_ss_div2 */
clk = clk_register_fixed_factor(NULL, "xusb_ss_div2", "xusb_ss_src", 0,
1, 2);
clks[TEGRA124_CLK_XUSB_SS_DIV2] = clk;
/* dsia mux */
clk = clk_register_mux(NULL, "dsia_mux", mux_plld_out0_plld2_out0,
......@@ -1368,6 +1363,12 @@ static struct tegra_clk_init_table init_table[] __initdata = {
{TEGRA124_CLK_SBC4, TEGRA124_CLK_PLL_P, 12000000, 1},
{TEGRA124_CLK_TSEC, TEGRA124_CLK_PLL_C3, 0, 0},
{TEGRA124_CLK_MSENC, TEGRA124_CLK_PLL_C3, 0, 0},
{TEGRA124_CLK_PLL_RE_VCO, TEGRA124_CLK_CLK_MAX, 672000000, 0},
{TEGRA124_CLK_XUSB_SS_SRC, TEGRA124_CLK_PLL_U_480M, 120000000, 0},
{TEGRA124_CLK_XUSB_FS_SRC, TEGRA124_CLK_PLL_U_48M, 48000000, 0},
{TEGRA124_CLK_XUSB_HS_SRC, TEGRA124_CLK_PLL_U_60M, 60000000, 0},
{TEGRA124_CLK_XUSB_FALCON_SRC, TEGRA124_CLK_PLL_RE_OUT, 224000000, 0},
{TEGRA124_CLK_XUSB_HOST_SRC, TEGRA124_CLK_PLL_RE_OUT, 112000000, 0},
/* This MUST be the last entry. */
{TEGRA124_CLK_CLK_MAX, TEGRA124_CLK_CLK_MAX, 0, 0},
};
......
drivers/clk/versatile/clk-icst.c
View file @ dedca6ab
......@@ -160,3 +160,4 @@ struct clk *icst_clk_register(struct device *dev,
return clk;
}
EXPORT_SYMBOL_GPL(icst_clk_register);
drivers/clk/versatile/clk-impd1.c
View file @ dedca6ab
This diff is collapsed.
drivers/clk/zynq/clkc.c
View file @ dedca6ab
......@@ -53,6 +53,9 @@ static void __iomem *zynq_clkc_base;
#define NUM_MIO_PINS 54
#define DBG_CLK_CTRL_CLKACT_TRC BIT(0)
#define DBG_CLK_CTRL_CPU_1XCLKACT BIT(1)
enum zynq_clk {
armpll, ddrpll, iopll,
cpu_6or4x, cpu_3or2x, cpu_2x, cpu_1x,
......@@ -499,6 +502,15 @@ static void __init zynq_clk_setup(struct device_node *np)
clk_output_name[cpu_1x], 0, SLCR_DBG_CLK_CTRL, 1, 0,
&dbgclk_lock);
/* leave debug clocks in the state the bootloader set them up to */
tmp = clk_readl(SLCR_DBG_CLK_CTRL);
if (tmp & DBG_CLK_CTRL_CLKACT_TRC)
if (clk_prepare_enable(clks[dbg_trc]))
pr_warn("%s: trace clk enable failed\n", __func__);
if (tmp & DBG_CLK_CTRL_CPU_1XCLKACT)
if (clk_prepare_enable(clks[dbg_apb]))
pr_warn("%s: debug APB clk enable failed\n", __func__);
/* One gated clock for all APER clocks. */
clks[dma] = clk_register_gate(NULL, clk_output_name[dma],
clk_output_name[cpu_2x], 0, SLCR_APER_CLK_CTRL, 0, 0,
......
include/dt-bindings/clock/bcm21664.h 0 → 100644
View file @ dedca6ab
This diff is collapsed.
include/dt-bindings/clock/bcm281xx.h
View file @ dedca6ab
......@@ -20,6 +20,18 @@
* the clock control units (CCUs) on Broadcom BCM281XX family SoCs.
*/
/*
* These are the bcm281xx CCU device tree "compatible" strings.
* We're stuck with using "bcm11351" in the string because wild
* cards aren't allowed, and that name was the first one defined
* in this family of devices.
*/
#define BCM281XX_DT_ROOT_CCU_COMPAT "brcm,bcm11351-root-ccu"
#define BCM281XX_DT_AON_CCU_COMPAT "brcm,bcm11351-aon-ccu"
#define BCM281XX_DT_HUB_CCU_COMPAT "brcm,bcm11351-hub-ccu"
#define BCM281XX_DT_MASTER_CCU_COMPAT "brcm,bcm11351-master-ccu"
#define BCM281XX_DT_SLAVE_CCU_COMPAT "brcm,bcm11351-slave-ccu"
/* root CCU clock ids */
#define BCM281XX_ROOT_CCU_FRAC_1M 0
......
include/dt-bindings/clock/hix5hd2-clock.h 0 → 100644
View file @ dedca6ab
This diff is collapsed.
include/dt-bindings/clock/tegra114-car.h
View file @ dedca6ab
......@@ -337,6 +337,7 @@
#define TEGRA114_CLK_CLK_OUT_3_MUX 308
#define TEGRA114_CLK_DSIA_MUX 309
#define TEGRA114_CLK_DSIB_MUX 310
#define TEGRA114_CLK_CLK_MAX 311
#define TEGRA114_CLK_XUSB_SS_DIV2 311
#define TEGRA114_CLK_CLK_MAX 312
#endif /* _DT_BINDINGS_CLOCK_TEGRA114_CAR_H */
include/dt-bindings/clock/tegra124-car.h
View file @ dedca6ab
......@@ -336,6 +336,7 @@
#define TEGRA124_CLK_DSIA_MUX 309
#define TEGRA124_CLK_DSIB_MUX 310
#define TEGRA124_CLK_SOR0_LVDS 311
#define TEGRA124_CLK_CLK_MAX 312
#define TEGRA124_CLK_XUSB_SS_DIV2 312
#define TEGRA124_CLK_CLK_MAX 313
#endif /* _DT_BINDINGS_CLOCK_TEGRA124_CAR_H */
include/linux/clk-provider.h
View file @ dedca6ab
This diff is collapsed.
include/linux/clk/shmobile.h
View file @ dedca6ab
This diff is collapsed.
include/linux/clk/sunxi.h 0 → 100644
View file @ dedca6ab
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7