Commit df1b7af2 authored by Anssi Hannula's avatar Anssi Hannula Committed by Marc Kleine-Budde

can: kvaser_usb_leaf: Set Warning state even without bus errors

kvaser_usb_leaf_rx_error_update_can_state() sets error state according
to error counters when the hardware does not indicate a specific state
directly.

However, this is currently gated behind a check for
M16C_STATE_BUS_ERROR which does not always seem to be set when error
counters are increasing, and may not be set when error counters are
decreasing.

This causes the CAN_STATE_ERROR_WARNING state to not be set in some
cases even when appropriate.

Change the code to set error state from counters even without
M16C_STATE_BUS_ERROR.

The Error-Passive case seems superfluous as it is already set via
M16C_STATE_BUS_PASSIVE flag above, but it is kept for now.

Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778.

Fixes: 080f40a6 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: default avatarJimmy Assarsson <extja@kvaser.com>
Signed-off-by: default avatarAnssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: default avatarJimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-6-extja@kvaser.comSigned-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
parent b24cb2d1
......@@ -961,20 +961,16 @@ kvaser_usb_leaf_rx_error_update_can_state(struct kvaser_usb_net_priv *priv,
new_state = CAN_STATE_BUS_OFF;
} else if (es->status & M16C_STATE_BUS_PASSIVE) {
new_state = CAN_STATE_ERROR_PASSIVE;
} else if (es->status & M16C_STATE_BUS_ERROR) {
} else if ((es->status & M16C_STATE_BUS_ERROR) &&
cur_state >= CAN_STATE_BUS_OFF) {
/* Guard against spurious error events after a busoff */
if (cur_state < CAN_STATE_BUS_OFF) {
if (es->txerr >= 128 || es->rxerr >= 128)
new_state = CAN_STATE_ERROR_PASSIVE;
else if (es->txerr >= 96 || es->rxerr >= 96)
new_state = CAN_STATE_ERROR_WARNING;
else if (cur_state > CAN_STATE_ERROR_ACTIVE)
new_state = CAN_STATE_ERROR_ACTIVE;
}
}
if (!es->status)
} else if (es->txerr >= 128 || es->rxerr >= 128) {
new_state = CAN_STATE_ERROR_PASSIVE;
} else if (es->txerr >= 96 || es->rxerr >= 96) {
new_state = CAN_STATE_ERROR_WARNING;
} else {
new_state = CAN_STATE_ERROR_ACTIVE;
}
if (new_state != cur_state) {
tx_state = (es->txerr >= es->rxerr) ? new_state : 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment