net: dsa: mv88e6xxx: add mv88e6250_g1_ieee_pri_map

Quite a few of the existing supported chips that use
mv88e6085_g1_ieee_pri_map as ->ieee_pri_map (including, incidentally,
mv88e6085 itself) actually have a reset value of 0xfa50 in the
G1_IEEE_PRI register.

The data sheet for the mv88e6095, however, does describe a reset value
of 0xfa41.

So rather than changing the value in the existing callback, introduce
a new variant with the 0xfa50 value. That will be used by the upcoming
mv88e6250, and existing chips can be switched over one by one,
preferably double-checking both the data sheet and actual hardware in
each case - if anybody actually feels this is important enough to
care.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/mv88e6xxx/global1.c

@@ -299,6 +299,12 @@ int mv88e6085_g1_ieee_pri_map(struct mv88e6xxx_chip *chip)
 	return mv88e6xxx_g1_write(chip, MV88E6XXX_G1_IEEE_PRI, 0xfa41);
 }
 
+int mv88e6250_g1_ieee_pri_map(struct mv88e6xxx_chip *chip)
+{
+	/* Reset the IEEE Tag priorities to defaults */
+	return mv88e6xxx_g1_write(chip, MV88E6XXX_G1_IEEE_PRI, 0xfa50);
+}
+
 /* Offset 0x1a: Monitor Control */
 /* Offset 0x1a: Monitor & MGMT Control on some devices */
 

drivers/net/dsa/mv88e6xxx/global1.h

@@ -277,7 +277,9 @@ int mv88e6390_g1_set_cpu_port(struct mv88e6xxx_chip *chip, int port);
 int mv88e6390_g1_mgmt_rsvd2cpu(struct mv88e6xxx_chip *chip);
 
 int mv88e6085_g1_ip_pri_map(struct mv88e6xxx_chip *chip);
+
 int mv88e6085_g1_ieee_pri_map(struct mv88e6xxx_chip *chip);
+int mv88e6250_g1_ieee_pri_map(struct mv88e6xxx_chip *chip);
 
 int mv88e6185_g1_set_cascade_port(struct mv88e6xxx_chip *chip, int port);